The sequence app should immediately stop the child when it called
parent().exit(). Otherwise, the child will continue execution which
causes a race condition: The child's ld.lib.so will eventually destruct
an Attached_rom_dataspace for the config rom. If sequence destructed the
corresponding service first, we will get an Ipc_error.
genodelabs/genode#4267
This patch introduces a C API to be used by input drivers to generate
Genode events. The initial version is limited to multitouch events only.
Fixes#4273
The former implementation did not internally track ROM changes notified
vs. delivered to the client. We adapt the versioning implementation
implemented in dynamic_rom_session.h and enable explicit notification of
the current version.
The feature is used by the clipboard to notify permitted readers of the
clipboard ROM service on focus change via the newly created private
Rom::Module::_notify_permitted_readers() function.
Fixes#4274
The various mapping methods are modelled after the requirements of
the Intel GPUs or rather the Mesa driver back end.
With upcoming support for other driver back ends, we need to
sequeeze their requirements in as well. For now hijack 'map_buffer'
to provide for specifying the kind of attributes the client needs.
For now all buffers mapped in the GGTT for Intel GPUs are treated
as RW.
Issue #4265.
This call allows for checking if the given execution buffer has been
completed and complements the completion signal. Initially the GPU
multiplexer always sent such a signal when the currently scheduled
execution buffer has been completed. During enablement of the 'iris'
driver it became necessary to properly check of sequence number.
In case of the Intel GPU multiplexer the sequence numbers are
continous, which prompted the greater-than-or-equal check in the
DRM back end. By hidding this implementation detail behind the
interface, GPU drivers are free to deal with sequence numbers any
way they like and allows for polling in the client, where the
completion signal is now more of a progress signal.
Issue #4265.
The current info implementation (as RPC) is limited in a few ways:
* The amount of data that may be transferred is constrained by the
underlying base platform
* Most information never changes during run time but is copied
nonetheless
* The information differs depending on the used GPU device and
in its current implementation only contains Intel GPU specific
details
With this commit the 'info' RPC call is replaced with the
'info_dataspace' call that transfers the capability for the dataspace
containing the information only. This is complemented by a client
local 'attached_info' call that allows for getting typed access to
the information. The layout of the information is moved to its own
and GPU-specific header file, e.g., 'gpu/info_intel.h'
Issue #4265.
Rather than using the dataspace capability directly, let the client
choose its own local identifier that is linked to the underlying
capability.
Fixes#4265.
Right now the warning about failure to forward packet from driver to
uplink RX connection reads:
"exception while trying to forward packet from driverto Uplink
connection TX"
Add missing space between "driver" and "to".
Issue #4264
32KB is a rather small value. The driver can cope with it now, but
it does not perform as well as it should. This visible especially
in scenarions like nic_router_flood where we still often hit
synchronous wait path. Bump the size to 256kB.
Issue #4264
The problem can be seen when running nic_router_flood scenarion on arm
qemu_virt boards. With the amount of data this scenario tries to send
the driver quickly complains it has failed to push data into TX VirtIO
queue. After this warning message is printed nothing really happens and
after a while the test scenario fails.
The fact that we can't write all available data to the device is not
unexpected. VirtIO queue size is slected at initialization time and we
don't change it during driver lifetime. It can be tweaked via driver
config, but this does not change the fact that we'll always be able to
produce more data packets than we have free space in the VirtIO queue.
IMO the expected behavior of the driver in such case should be to:
1. Notify the device there is data to process.
2. Wait for the device to process at least part of it.
3. Retry sending queued packets.
One could expect returning Transmit_result::RETRY from _drv_transmit_pkt
would produce such result. Unfortunately it seems that Uplink_client_base
treats RETRY return value as indication of link being down. It'll retry
sending the packet only after the device notifies it the link is once
again up. This is the reason why nothing happens when running
nic_router_flood on top of virtio_nic driver. The link never goes down
in this case so once we fill the TX VirtIO queue and tell the base class
to retry the send, we'll be stuck waiting for link up change event
which will never arrive.
To fix this problem, when sending a packet to the device fails, do a
synchrnonus TX VirtIO queue flush (tell device there is data to process
and wait until its done with it).
With this fix in place nic_router_flood test scenario passes on both arm
qemu_virt boards.
Issue #4264
The contents of those descriptor rings can be modified by the device.
Mark them as volatile so the compiler does not make any assumptions
about them.
Issue #4264
This commit contains features and buf fixes:
* Catch errors during resource allocation
* Because Mesa tries to allocate fence (hardware) registers for each
batch buffer execution, do not allocate new fences for buffer objects
that are already fenced
* Add support for global hardware status page. Each context additionally
has a per-process hardware status page, which we used to set the
global hardware status page during Vgpu switch. This was obviously
wrong. There is only one global hardware status page (set once during
initialization) and a distinct per-process page for contexts.
* Write the sequence number of the currently executing batch buffer to
dword 52 of the per-process hardware status page. We use the pipe line
command with QW_WRITE (quad word write), GLOBAL_GTT_IVB disabled
(address space is per-process address space), and STORE_DATA_INDEX
enabled (write goes to offset of hardware status page). This command
used to write to the scratch page. But Linux now uses the first
reserved word of the per-process hardware status page.
* Add Gen9+ WaEnableGapsTsvCreditFix workaround. This sets the "GAPS TSV
Credit fix Enable" bit of the Arbiter control register (GARBCNTLREG)
as described by the documentation this bit should be set by the BIOS
but is not on most Gen9/9.5 platforms. Not setting this bit leads to
random GPU hangs.
* Increase the context size from 20 to 22 pages for Gen9. On Gen8 the
hardware context is 20 pages (1 hardware status page + 19 ring context
register pages). On Gen9 the size of the ring context registers has
increased by two pages to 21 pages or 81.3125 KBytes as the IGD
documentation states.
* The logical ring size in the ring buffer control of the execlist
context has to be programmed with number of pages - 1. So 0 is 1 page.
We programmed the actual number of pages before, leading to ring
buffer execution of NOOPs if page behind our ring buffer was empty or
GPU hangs if there was data on the page.
issue #4260
Increased number of trace subjects since the test sporadically fails on
some platforms.
Also added a sanity check to print an error message in case we run into
the same issue again.
Fixesgenodelabs/genode#4261
The NIC router parses, stores and forwards DNS domain names from DHCP replies.
Yet the routers DHCP client used to not request DNS domain-name information on
DHCP requests. This caused DHCP servers to skip this information on their
replies although it was available. This commit fixes the issue by adding the
DNS domain name code to the request parameter list of requests from the routers
DHCP client.
The 'black_hole' component provides dummy implementations of common
session interfaces.
At this time, only the 'Audio_out' session is provided if enabled
in the configuration of the component:
<config>
<audio_out/>
</config>
Issue #3653
According to spec the tail pointer points to the next qword instructions
which will be used by the software.
p 1354, Doc Ref # IHD-OS-BDW-Vol 2c-11.15
issue #4254
Superpages (2M, 1G) are not supported by now, but partially copied over code
from base-hw was around. Remove unused register definitions and remove
non-working super page code do avoid confusion.
issue #4254
Size argument of ggtt free range check is ignored, which leads to
overlapping allocations inside, which leads to unavailable IO-MEM exceptions
thrown by core.
issue #4254
Both, trace_logger and vfs_trace had their own trace_buffer.h. This
commit consolidates the existing implementations and provides the
resulting trace_buffer.h at 'include/trace/'. It thereby becomes part of
the trace api archive.
genodelabs/genode#4244
If the trace subjects are not properly destructed when the TRACE client
disappears, enabled sources will be owned by a non-existing client.
In other words, when a TRACE client disappears all sources owned by the
client must be disabled.
genodelabs/genode#4247
test-trace always passed, although tracing was never enabled because the
trace subject was not within the first 32 subjects.
* increase number of queried subjects
* output error if trace subject was not found
genodelabs/genode#4247
With this commit, the NIC router DHCP client reads out the first DNS domain
name (DHCP option 15) if any from a DHCP reply that generates an IPv4 config
for a domain and stores the name together with the IPv4 config for that domain.
DNS domain names are reported via the new report tag '<dns-domain>' if the
'config' attribute in the config tag '<report>' is set.
Furthermore, the NIC router DHCP server becomes able to obtain a DNS domain
name from another domain that has a DHCP client dynamically (given the config
attribute 'dns_config_from' is set and no static DNS config is given) or
statically from its configuration (new config tag '<dns-domain>') and propagate
this name with DHCP replies (DHCP option 15).
The 'nic_router_dhcp_*' tests are adapted to test the new feautures.
The commit also gets rid of some mirrored files in
'test/nic_router_dhcp/manager'.
Fixes#4246
WARNING: BREAKS CONFIG COMPATIBILITY!
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
How to adjust:
At each occurrence of the 'dns_server_from' attribute in a NIC router
configuration replace the attribute name with 'dns_config_from'. The attribute
value remains unaltered.
DETAILED DESCRIPTION
The new attribute name 'dns_config_from' reflects that also other aspects of
the DNS configuration of the denominated domain are used by the DHCP server
that holds the attribute. This commit is a preparation for forwarding also the
domain name (DHCP option 15) with the mechanism behind the attribute.
Ref #4246
The fact that the IPv4 config was a struct with all data members public was a
mere leftover of an early state of the NIC router. Today, the router
implementation style is to avoid structs and public data members wherever
possible.
This commit slightly changes the behavior of the router regarding log output.
The router used to print malformed IPv4 configurations to the log only if
the 'verbose' config flag was set using this style:
! [my_domain] malformed dynamic IP config: interface 10.0.2.1/24 ...
Now, malformed IPv4 configurations are only printed if the
'verbose_domain_state' config flag is set (like with any IP4v configuration
states) using this style:
! [my_domain] dynamic IP config: malformed (interface 10.0.2.1/24 ...)
Fixes#4242
The NIC router DHCP server used to add an extra option 6 field to DHCP replies
for each DNS server address. This conflicts with RFC #2132 section 3.8 which
states that the addresses should be listed within one option 6 field without
delimiter. The discrepancy is fixed by this commit.
Ref #4242
Via a new configuration attribute, the user can decide whether the router
should answer dropped fragmented IPv4 with an ICMP "destination unreachable"
packet and, if so, which value the ICMP code field of this packet should have.
The default is that the router doesn't send such responses (silently dropping
fragmented IPv4). The behavior is tested by the 'nic_router_ipv4_fragm' test.
Fixes#4236
If the new attribute 'dropped_fragm_ipv4' of the <report> tag in the NIC router
config is set "yes", the router will report the number of packets that were
dropped per interface respectively domain because fragmented IPv4 is not
supported. The default is not to report the counter. The behavior is tested by
the 'nic_router_ipv4_fragm' test.
Ref #4236
The NIC router used to ignore the IPv4 header fields "More fragments" and
"Fragment offset" completely. Therefore higher-level protocols of fragmented
IPv4 were interpreted wrong because each fragment was considered a self-
standing packet, expecting, for instance UDP/TCP headers somewhere inside of
the UDP/TCP data field. Normally, such packets were dropped as soon as the
UDP/TCP checksum check failed because of the misinterpretation. However,
it was also possible for fragmented IPv4 to pass the router although normally
only partially.
IPv4 fragmentation support in the router would introduce some potential
security risks and is presumably not an easy endeavor. So, for now, we settled
on not supporting IPv4 fragmentation. With this commit, the router simply drops
all fragmented IPv4. This is reflected to the log for each fragment as "drop
packet (fragmented IPv4 not supported)" when 'verbose_packet_drop="yes"' is
configured.
The new test 'run/nic_router_ipv4_fragm' is an automated test for this
behavior. The test is added to the autopilot list.
Ref #4236
* the GPU multiplexer now offers the platform service to the Intel
framebuffer driver (driver_manager)
* ajdusted drivers_managed-pc to hand out resources to the GPU driver
* adjust quotas
issue #4233
The platform services is intented to be used by dde_linux's intel_fb_drv
in order to initlialize displays.
* implement and announce platform session
* limit accessible GTT and aperture of client to 64 MB
* forward display engine IRQs to platform client
* move all PCI resources to 'Igd::Resources' class in order to make them
accessible by the platform service and the GPU driver
* fix fence register allocation for id zero (return true)
issue #4233
For mesa-21 the client takes care and manages
the virtual address space of the vGPU by itself and the intel/gpu driver
can't add silently a guard page anymore. Move the patch to the drm/ioctl
of the former mesa version.
Issue #4148#4233
_unmap_dataspace_ggtt requires the cap of Ggtt::Mapping (ring_map, ctx_map)
in order to find the right metadata and to free up the ggtt entries. Also the
pte range is removed already if the metadata was found.
Issue #4148#4233
BREAKS CONFIG COMPATIBILITY:
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
HOW TO ADJUST:
At each occurrence of the '<uplink ...>' tag in a NIC router configuration
replace the tag name 'uplink' with 'nic-client'. The rest of the tag stays the
same.
The term "uplink" for network interfaces in the router that have a NIC session
client as back end was introduced in a time when Uplink sessions didn't yet
exist. Now, they do and, although both an uplink and an Uplink session
normally describe a network session between router and network device driver,
they are based on two different service types (NIC and Uplink). This can easily
cause confusion when integrating the router (the <uplink> is not related to
Uplink sessions) or trying to understand its functioning (an 'Uplink' object
has nothing to do with the Uplink service).
Therefore, this commit introduces the more specific term "NIC client" for an
interface that is based on a NIC session requested by the router. This doesn't
imply any semantic changes at the NIC router. However, the commit also brings a
broader update of the router's README and removes the term "downlink" that was
used only in documentation to refer to interfaces backed by a NIC session
provided by the router. The term was only associated with this meaning because
it is the natural counterpart to an uplink. This isn't appropriate anymore as
the terms for interface types have moved to a more technical level.
The commit adjusts all scenarios in the basic Genode repositories properly.
Fixes#4238
An interface that received a signal for a link-state change accessed its
domain reference without assuming that it could not be attached to a domain
at that moment. This caused the NIC router to crash with an uncaught exception
of type 'Net::Pointer<Net::Domain>::Invalid'. The commit adds a catch
directive for this exception resulting in the handler doing nothing if not
attached to any domain.
Fixes#4222
The test script failed during preparation of the on-target execution for
USB Armory with the following error:
! can't read "tz_vmm_block_irq": no such variable
Presumably, the script wasn't run anymore since the introduction of the
'tz_vmm_block_irq' variable for i.MX53 QSB. As we do not have infrastructure
for automated testing of the USB Armory and there seems to be not much
interest in using Genode on this platform, this commit simply removes the
support from the script.
Filtering boards in a run script by specs isn't the right way anymore (the
specs do not exist anymore). Nowadays, we have to use [have_board] instead.
Ref #4229
For unknown reasons, the former 'wget genode.org' call, that was meant to test
network in the Trustzone guest on imx53_qsb_tz, didn't succeed anymore although
the same call succeeded on my Sculpt VM Linux. However, 'ping 1.1.1.1' still
works, so, the script now uses this as test for networking instead.
Fixes#4229
So far, in order to create an ARP reply, the NIC router merely created a copy
of the corresponding ARP request and modified only those values that differ.
This approach has the disadvantage of re-using bad parameters from a broken
request. The specific use-case that made this visible was an early version of
the Pine board network driver that used to forward ARP requests with a greater
size than required. The ARP replies of the router re-used this size and
confused other network nodes with that. In general, the NIC router should
rely on the data of incoming packets the least possible. Therefore, with this
commit, the router creates a new ARP reply from scratch and uses only those
values required from the corresponding ARP request.
Fixes#4235
The former declaration of the IPv4 packet did not only use the questionable
tool of implementation-defined C++ bitsets but also lacked access to flags
"don't fragment" (DF) and "more fragments" (MF). This commit replaces the
C++ bitsets by using the register framework and introduces accessors for the
missing flags.
Ref #4236
This commit introduces a C-API to the Uplink session, as well as to
serve as a Block service. It can be used by drivers ported from
C-only projects, like the Linux kernel, or BSD kernels for instance.
Fix#4226
Adds try-catch-statement with diagnostic errors in Dhcp_server::free_ip in
order to guard against exceptions from the underlying bit allocator. These
exceptions should never happen given that the router is programmed correctly
and always feeds Dhcp_server::free_ip with sane arguments (which it should).
However, should this not be the case, we can assume that the failed IP freeing
indicates that the IP isn't allocated anyway and it's fine to continue using
the router. Furthermore, IP allocations are a mere client service and not
relevant for the integrity or safety of the router.
Ref #4200
When Interface::handle_config_3 (third step of applying a new configuration to
interfaces) tried to detach the interface from the current IP config because
the old and new IP config differed, it did so using the new domain. The former
steps of the reconfiguration already installed the new domain reference at the
interface. Therefore, also the DHCP server of the new domain was used. This,
however caused uncaught exceptions because detaching from an IP config
includes dissolving all DHCP allocations. This dissolving of DHCP allocations
now operated on a DHCP server (the one of the new domain) that wasn't related
to the allocations and, in the worst case, caused an uncaught exception
because the IPs were out of its range.
That said, this commit ensures that detaching an interface from an IP config
is always done on the domain from which the IP config originated. Normally,
this is the domain the interface is attached to. But in the case of
Interface::handle_config_3, it is another - the former domain the interface
was attached to.
The commit also adapts the nic_router_dhcp_* tests in a way that they
reconfigure the router in a way that would trigger the uncaught exception
without the fix.
Fixes#4200
Adapts Dir_file_system::open_composite_dirs in a way that it returns "success"
when the leaf node of the path is an empty directory but "lookup failed", as
usual, if one of the other directories on the way to the leaf node is empty.
I couldn't find a technical reason why we used to return "lookup failed" when
only the leaf node was empty.
The commit also adds a test for en empty root directory and empty
sub-directories to the fs_query run script.
Fixes#4198
Enable watching files via the inotify interface of the Linux Kernel.
Delivery of watches to components is staggered in order to prevent an
overflow of the ACK queue in cases when a lot of changes are made to the
file system from the Linux side.
Fixes#4070
A reset domain can consist of one or several reset-pins
denoted by name that are assigned to a device.
When the device gets acquired via the Platform RPC API,
the pins are de-asserted, and asserted again when the
device gets released.
A configuration looks like the following:
<device name="mipi_dsi>
<reset-domain name="mipi_dsi_pclk"/>
...
</device>
Fixes#4171
Introduces the notion of a transaction that consists of one or more
messages. Whereby a message has a read or write direction and consists
of one or more bytes.
Issue #4170Fixes#4169
Report via platform_info the capabilities of the kernel, e.g. ACPI and MSI.
With the commit the try-catch pattern on IRQ session creation by the platform
driver is avoided.
Issue #4016
This patch moves the utility from the app/text_area to os/vfs.h to make
it easier to use by other components. By hosting the 'New_file' as a
friend alongside the 'Directory', we can now pass a 'Directory' as
constructor argument, which is consistent with other utilities such as
'File_content'.
As a further improvement, the new version supports the implicit creation
of the directory hierarchy leading to the new file.
Issue #4032
For fs_file_systems, reads are limited to the size of the packets from the
File_system session. Hence, we cannot read the large files in one go.
This fix is particularly helpful for fonts_fs, as it enables including font
files from a File_system.
genodelabs/genode#4135
When a DHCP packet is printed out, it first tries to determine the most
specific message type from the DHCP options and print its human-readable name
right after the protocol name. If finding the message type fails, the less
specific opcode is printed instead, but also in a human-readable way.
Fixes#4131
This new runscript demonstrates how a file can be overwritten by vfs
import with the flag overwrite set to false. This is due to a bug
in lx_fs that is not propagating an ernno EEXIST syscall error.
Issue genodelabs#4104
This commit introduces a fix for lx_fs to propagate errno EEXIST error.
This prevents vfs <import overwrite="false"> to overwrite an imported
file, if it already exists, without the overwrite flag set to true.
Issue genodelabs#4104
With the update to GCC 10, the compiler stopped with an error when compiling
places where a MAC address is copied from outside into a packed object using
the Net::Netaddress::copy method (e.g. in
Net::Arp_packet::dst_mac(Mac_address)):
! error: writing 6 bytes into a region of size 4 [-Werror=stringop-overflow=]
While trying to find a clean solution for this error, I found posts on
gcc.gnu.org and github that stated that the size calculations that cause these
errors are incorrect. Indeed, I could verify that the actual size of the two
regions was static and exactly the same in places were the error occured.
Furthermore, I couldn't find a way of making it more clear to the compiler
that the sizes are the same. By accident, we found that using the address of
the first element of the array that forms the second region instead of the
array address itself, somehow circumvents the error.
Fixes#4109
With the update to GCC 10 the compiler used to warn when using the internet
checksum functions on packet classes (like in
Net::Ipv4_packet::update_checksum):
warning: converting a packed ‘Net::[PACKET_CLASS]’ pointer
(alignment 1) to a ‘const uint16_t’ {aka ‘const short
unsigned int’} pointer (alignment 2) may result in an
unaligned pointer value
Apparently, the 'packed' attribute normally used on packet classes sets the
alignment of the packet class to 1. However, for the purpose of the
internet-checksum functions, we can assume that the packet data has no
alignment. This is expressed by casting the packet-object pointer to a pointer
of the new packed helper struct 'Packed_uint16' that contains only a single
uint16_t member before handing it over to the checksum function (instead of
casting it to a uint16_t pointer).
Ref #4109
The NAT feature of the NIC router used to prefer re-using source ports that
have been freed recently. From an external server's perspective, if a client
dies and restarts, chances are high that the new connect arrives with the same
source-IP/source-port as the old connection. The server has to forcefully reset
the connection. If that happens a lot, the server may even start to ignore
further connections from this IP/port combination for a while as a mitigation.
This patch adds a continuous counter feature that makes sure that every new
port allocation will increment and result in a port that hasn't been used for a
long time.
The NAT feature of the nic_router is now more in line with RFC 6056 chapter 4.
Ref #4086
KEY_UNKNOWN is a collective symbols for all unknown keycodes.
Remapping thus requires iterating through all corresponding codes
instead of only applying the policy to the first match.
Issue genodelabs#4069
Introduce a new _overflowed state variable to indicate whether the
horizontal boundary was reached already and to omit subsequent character
output.
This state is necessary to maintain a valid cursor position at all
times. The _overflowed attribute is reset once the cursor is moved into
a valid position again.
To harmonise the bounds checking for _cursor_pos modifications, the
`constrain()` method was added.
Fixesgenodelabs/genode#4093
Also fixes a bug in `vpa()` and `vpb()` which moved the cursor
horizontally instead of vertically.
* The device XML information dataspace is only provided,
when the client's policy states `info="yes"`
* The device XM information gets changed to include the
physical resource names (I/O memory and IRQ addresses)
instead of virtual ids and page offset
Fix#4077
This is a follow-up fix for "Streamline platform-device API on ARM".
There is an ambiguity of the 'local_addr' method between the inherited
'Attached_dataspace' and the local declaration, which results in the
double application of the sub-page Range::start.
Issue #4075
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of
- Platform::Device - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq - interface for receiving device interrupts
The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.
Fixes#4075
These messages pollute the boot log of Sculpt OS when ROM modules are
requested for files of the config fs before the sculpt manager has
created their first version.
This patch extends the 'Platform_session::alloc_dma_buffer' interface
with a 'Cache' argument that corresponds to the argument accepted by
'Ram_allocator::alloc', which is used by the platform driver under the
hood.
Since the x86 platform driver used to be hardwired to allocate DMA
buffers as UNCACHED, I adjusted all drivers by specifying the UNCACHED
argument. Right now, this is needed as a hint for core to steer the
allocation of I/O page tables. Once we eliminate the need for such hints
(by introducing an explicit 'Region_map::attach_dma' operation), we can
revisit the drivers individually because cached DMA buffers should
generally be fine on the x86 architecture.
Issue #2243
This change avoids many repetetive Genode:: prefixes, making the code
easier to read. The patch also includes a few consistency fixes
regarding include guards and file headers. It also renames
Platform_device::String to Platform_device::Device:name.
Issue #2243
This patch adds the designated alternative to Dataspace::phys_addr to
the platform-session interface. Under the hood, the platform driver
still calls Dataspace::phys_addr but it should eventuelly become the
only caller before we can abolish this function.
Issue #2243
This commit optimizes the 'Child::resolve_session_request'
implementation by introducing an internal 'Route_model' for quickly
traversing routing rules instead of parsing XML on each session request.
Fixes#4068
This commit replaces the hand-crafted config processing by the use of
the 'List_model' utility. This has the following advantages:
- The parsing follows a common formalism that makes the code
easier to maintain and to understand. Several parts of the code
had to be changed (for the better) to make it fit the list model
approach. E.g., the child states have become more expressive
and logical.
- In the common case, the XML data is traversed only once, which
increases the parsing speed in dynamic scenarios.
- The code becomes easier to optimize. In particular, the patch skips
the re-evaluation of the session routing if no service is affected
by the config change.
The patch also revisits the init test by removing overly long sleep
phases and extending a few sleep phases that were too short when
executing the test on Qemu.
Issue #4068
This patch changes the 'alloc_aligned' interface as follows:
- The former 'from' and 'to' arguments are replaced by a single
'range' argument.
- The distinction of the use cases of regular allocations vs.
address-constrained allocations is now overed by a dedicated
overload instead of relying on a default argument.
- The 'align' argument has been changed from 'int' to 'unsigned'
to be better compatible with 'addr_t' and 'size_t'.
Fixes#4067
This patch avoids the RTC driver's aggressive polling during the
(CPU-bounded) boot of Sculpt OS. As the RTC is not needed during bootup,
this patch reduces the boot time (on Qemu) by 2-4 seconds.
Fixes#4065
If 'system="yes"' is specified in the <config>, the platform driver now
monitors the content of the system ROM. Should the value become "reset",
a reset is triggered using information obtained from the ACPI driver.
Related to issue #2726
The change of the platform driver is needed to avoid a parsing error of
the ACPI ROM when encountering an unexpected <reset> node.
Thanks to Alexander Boettcher for the preventing the regression of #3829
and improving the adherence to the ACPI spec when parsing the reset type.
Related to issue #2726
In case there is no valid configuration the component used to mute
output by default. This, however, might lead to the assumption that
audio is not working at all. Instead set the master output volume to
50% and the per application volume to 100%.
Fixes#4043.
This patch adds the missing destruction of session-state objects of
local services when closing a session. Because of the missing
destruction, those session-state object remained part of the server
ID space. This becomes a problem once the backing store of the session
state object vanishes, that is when the client child gets removed from
the sandbox. Hence, the removal of a child with an open session to a
local service would lead to the corruption of the server ID space.
This patch adds the missing session.destroy() call.
Fixes#4044
This patch fixes a corner case where a child is destructed while a
asynchronous close request to a sibling server is still pending.
The child immediately discarded the session ID as the end of the
close-session processing, assuming that this ID is never to be needed
again. The session-state continues to exist to handle asynchrous close
protocol with the server.
However, if the child is destructed at this point (before the server
responded to the session request), the destruction of the child would
not cover the discharging of the session state because the session state
was no longer be part of the client's ID space. So once the asynchronous
close response from the server came in, the session state contained
stale information, in particular a stale closed_callback pointer.
The patch fixes the problem by deferring the discarding of the client ID
to the point where the session state is actually destructed. So the
session of a pending close response is covered by the child destructor.
Thanks to Pirmin Duss for reporting this issue along with a test
scenario for reproducing it!
Fixes#4039
* catch every possible path of the Bit_allocator_dynamic::Out_of_indices
exception
* add unconditional log output in the new "catch" directives, so, we will be
able to debug the problem a bit more in detail next time
Fixes#4036
This way, the redirected env sessions for the CPU burner are no longer
called directly by init. Init stays independent from the behavior of the
CPU balancer.
Issue #3837
Issue #4029
This shim component can be used in case where env sessions of child
(i.e., child's PD session) must be routed to another child of init.
Without the shim, init would directly need to interact with these
sessions and would thereby make itself dependent of the server's
behavior. RPC calls to a server hosted as a child lead to all kinds of
problems such as livelock situations, and putting the robustness of init
at the whim of its child.
With the shim, init merely needs to bootstrap the shim component by
routing the shim's env sessions to core as usual. The server is only
used for the sessions for the actual application hosted atop the shim.
Issue #3837
Issue #4029
* Add new virtio device model
* Extend test run-script with vfat block test image
* Add vmm depot src recipe
* Use packages in test run-script
Fix#4025
* Introduce different index types for ring counters and descriptor arrays
within the Virtio split queue implementation
* Be more accurate in reporting the queue number supported, and raise it
to 512
* Introduce abstractions for mmio register access, where several values
are stored at the same place, and selector registers exist.
* Turn Virtio_device into a template to define the Virio queue type,
and its numbers per device model (needed for e.g., future block model)
Issue #4025
The vfs pipe plugin can now be used as named pipe which anables data
transfer via file handles from one component to another. E.g. if one
would like to send data from component A to stdin of a libc component B,
one can do so by simply writing to that fifo file.
Issue #3583
* Update the 'packet_size' information with the actual length for
each isoc frame to be able to handle short reads at the client side.
* Copy the whole transfer buffer because the host controller stores
the data at the original offsets, i.e., the buffer is not densely
packed.
Fixes#4018.
This patch adds the missing invalidation of the _hovered pointer to
User_state::forget, which is required to cover the situation where the
owner of the hovered view vanishes.
Fixes#4011
The Vmm::Gic::Gicd_banked::Redistributor is used with Constructible, but
does not have a virtual destructor even though it has virtual methods.
This prompts clang to issue the following warning:
reconstructible.h:122:4: warning: destructor called on non-final
'Vmm::Gic::Gicd_banked::Redistributor' that has virtual functions
but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
Fix this by inheriting Genode::Interface.
Issue #3984
The "unsigned Nitpicker::Gui_session::layer()" function returns
~0UL. This prompts clang to produce a warning about implicit unsigned
long to unsigned int conversion. Fix it by returning ~0U instead of
~0UL.
Issue #3985
The _device_specific_features() implements part of the Virtio_device
interface. Decorate it with override keyword to make this clear and
also satisfy clang which produces warning regarding this.
Issue #3984
Clang 11 produces the following warning when building port_allocator.cc:
port_allocator.cc:27:21: error: result of comparison of constant 65536 with
expression of type 'const Genode::uint16_t' (aka 'const unsigned short') is
always true [-Werror,-Wtautological-constant-out-of-range-compare]
(port.value < (unsigned)(Port_allocator::FIRST +
Basically the code compares Port::value (uint16_t) against a constant
65536 which is larger than UINT16_MAX (65535). This comparison will always
be true.
Issue #3984
According to clang there are two symbols which File_system can refer to:
1. namespace File_system from ram_fs/chunk.h.
2. Vfs::File_system class from vfs/file_system.h.
Make it clear we refer to the File_system namespace in this case.
Issue #3984
Clang 12 complains that Interface can both refer to Genode::Interface
and Net::Interface in this case. Explicitly state the code refers to
the latter.
Issue #3984
This trace policy can be used as a fault-injection mechanism.
Once installed, the next time the traced thread passes a trace point
(e.g., RPC call, RPC request, ...), the policy produces a divide-by-zero
exception.
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
The new helper function returns a boolean value analoque to 'have_spec' if the
BOARD variable corresponds to the given value. It shall replace [have_spec <board>]
declarations in run-scripts.
Ref #3971
In order to perform a smooth transition from NIC drivers that act only as NIC
session clients to NIC drivers that act only as Uplink session clients, this
commit introduces an intermediate state in which all NIC drivers support both
modes. That said, a NIC drivers mode is now statically determined through a new
optional 'mode' attribute in the drivers <config> tag that can be set to either
'nic_server' (default value) or 'uplink_client'. Reconfiguring this attribute
at a driver doesn't have any effects. Whithout this attribute being set, all
NIC drivers will behave the same as they did before the commit. When set to
'uplink_client', however, instead of providing a Nic service, they request
an Uplink session whenever their network interface becomes "UP" and close the
session whenever their network interface becomes "DOWN".
Ref #3961
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Adds new Uplink session interface, the corresponding client side (Client,
Connection), and the corresponding API archives. An Uplink session is almost
the same as a NIC session with the difference that the roles of the end points
are swapped. An Uplink client is the one that provides a network interface
(for instance, a NIC driver) whereas an Uplink server is the one that uses
that network interface (for instance, a networking stack).
Therefore, in contrast to the NIC session, MAC address and link state come from
the Uplink client. The link state is reflected through the lifetime of an
Uplink session: The client requests the session only when the link state is
"UP" and closes it whenever the link state becomes "DOWN" again. The MAC
address is transmitted from the Uplink client to the Uplink server as an
argument of the session request.
Ref #3961
* Adds documentation how to prepare and finalize a Linux for running the
scenario ontop of it
* Adds consideration of env variable 'ON_LINUX_WITH_DST_IP' that, if set,
adapts the run script to running on Linux with the given ping destination IP
Ref #3961
- depending on available PCI power cap power off and on
- save and restore PCI bars if required
- reset PCI devices after power on if supported
Fixes#3963
using Register_set && Register. It is derived from Genode::Mmio, however uses
as backend the Config_access implementation which is still used widely in
the platform driver.
Issue #3963
Replace explicit usage of bus, device, function arguments to methods or
variables all over the code by a single data type. It eases the reading of and
shorten the code.
Issue #3963
When holding at least one key or button, the hovering should never
change. In the previous version, this invariant was not enforced,
but the symptoms for eventual inconsistencies were masked by two
checkes: one when generating the hover report, and one when submitting
the leave event. This patch enforces the invariant by suppressing any
change of 'User_state::_hovered' while in dragged state.
Fixes#3973
During position scaling use the location width/height which is the permitted
dimension within the child space, instead of using the whole possible
child space. (Fixup for "init: scale affinity location" Issue #1412)
Thanks to the report by Peter.
* Introduce 'use_arp' configuration flag at the NIC router in order to disable
requesting IP-to-MAC address resolutions via ARP for domains.
* Add automated run/nic_router_disable_arp test to the autopilot that tests
the effect of the new flag
* Document the new flag and the new test in the NIC router README
Fixes#3935
This commit restores the diag feature for selecting diagnostic output of
services provided by core. This feature became unavailable with commit
"base: remove dependency from deprecated APIs", which hard-wired the
diag flag for core services to false.
To control this feature, three possible policies can be expressed in a
routing target of init's configuration:
* Forcing silence by specifying 'diag="no"'
* Enabling diagnostics by specifying 'diag="yes"'
* Forwarding the preference of the client by omitting the 'diag'
attribute
Fixes#3962
- Vendor devices add addtional data to the config descriptor, read and
added to the usb session
- allow '0' configuration within the usb session
issue #3822
* The NIC router now considers, memorizes, and, if configured, reports
multiple DHCP option 6 entries from DHCP replies that it received as DHCP
client
* A DHCP server at the NIC router can now be configured statically with
multiple DNS server addresses to propagate
* The 'dns_server_from' attribute of the DHCP server of the NIC router now
supports the forwarding of multiple DNS server addresses
* The automated run/nic_router_dhcp test tests all the above mentioned new
functionality and reconfiguring it at runtime. The test was added to the
autopilot.
* All run scripts were adapted to fit the new NIC router configuration
interface
Fixes#3952
When reconfiguring the NIC router modifies the information that DHCP clients
received through a DHCP server of the NIC router, the link state of the
correspodning interface has to do a "down-up" sequence. This provides a signal
to the DHCP clients to redo DHCP, receive the new information and update
accordingly.
Fixes#3931
* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
Updating the config and using its settings instead of only reporting
the new session allows to apply stored channel settings immediately.
In case of Sculpt this is useful when an existing launcher already
contains a valid config that sets the volume levels appropiately or
the 'recall_fs' is used.
Fixes#3930.
When compiling this code, clang complains reference to 'Sandbox' is
ambiguous. It can either mean ::Sandbox namespace from
os/src/lib/sandbox/types.h, or Genode::Sandbox declared in
repos/os/include/os/sandbox.h. Since the code refers to ::Sandbox::Child
and its already in ::Sandbox namespace we can just drop "Sandbox" and
refer to just Child, which makes clang happy.
Issue #3938
* Fix GIC model to support priority and cpu target settings correspondingly
* Fix semantic of SGIR register for GICv2
* Minor GIC model IRQ state fix
* Introduce synchronization for VirtIO and GIC models
* Enable multiple CPUs in test run-script for ARMv8
Fix#3926
The driver is faily simple and does not support fancy features like
TCP checksum offloading or vlan filtering, but it is fully capable of
running every Genode network based scenario I've tried. Its currently
known to work on virt_qemu arm platforms and x86_64.
Fix#3825
To simplify writing native VirtIO drivers for Genode add helper classes
representing VirtIO device and queue. The queue implementation should
be platform independant. The device abstraction however is closely tied
to the VirtIO transport being used (PCI/MMIO). Both PCI and MMIO
implementations expose the same public API so the actual driver logic
should be the same regardless of which transport is used.
Its also important to note that the PCI version of Virtio::Device
currently does not support MSI-X interrupts. Unfortunately my kowledge
about PCI bus is very limited and my main area of interest was to get
VirtIO drivers working on virt_qemu ARM/Aarch64 platform. As such all
the VirtIO drivers I plan to submit will work with PCI bus, but might
not use some extended capabilities.
Ref #3825
The VirtIO device configuration on Qemu is dynamic. The
order and presence of different command line switches affects
base address and interrupt assignment of each device. One could
probably hard-code the necessary switches and resulting XML ARM
platform driver configuration in each run script, but this seems
like troublesome and hard to maintain solution.
This patch explores an alternative approach to the problem.
It implements a ROM driver which probes the address space region
Qemu virt machines assign to VirtIO MMIO devices and exposes the
result as XML via a ROM session. This XML output can be fed directly
as config to the generic ARM platform driver.
Ref #3825
Right now the same code dealing with nic setup on qemu is duplicated
in many different run scripts. It makes it unnecesarily complex to
change the existing config or add support for new nic types. Lets move
all this common code to qemu.inc.
Ref #3825
- make GPIO server more robust on imx by not throwing exceptions for
unknown pins, use '_with_gpio' instead
- use 'Gpio::Pin' data type instead of POD 'unsigned'
issue #3900
The patch handles the case, that the memory for the MSI-X table is part
of one of the Pci::Resource Memory BARs, which got allocated beforehand already.
With this commit, the platform driver will not fall back to use legacy IRQs or MSI, whereby MSI-X is available actually. Additionally, this patch avoids a lot of red
messages about non available IO-MEM printed by the roottask.
Fixes#3904
* get rid of alarm abstraction
* get rid of Timeout::Time type
* get rid of pointer arguments
* get rid of _discard_timeout indirection
* get rid of 65th bit in stored time values
* get rid of Timeout_scheduler interface
* get rid of uninitialized deadlines
* get rid of default arguments
* get rid of Timeout::_periodic
* get rid of Timeout::Raw
* use list abstraction
* only one interface for timeout handlers
* rework locking scheme to be smp safe
* move all method definitions to CC file
* name mutexes more accurate
* fix when & how to set time-source timeout
* fix deadlocks
Fixes#3884
This patch fixes the corner case where the keyboard focus is defined
independently from user interactivity, e.g., the activation of a
screensaver or lock screen.
In this case, nitpicker would update its internal focus state not before
the next input event is handled. Should this input event be a press
event, this event would wrongly be delivered to the prior focused
session. Another problematic situation is the initial state before the
very first input event occurs. Since the focus remains undefined until
the first input event is handled, an initial key press event would not
be delivered.
This is a regression caused be the transition to the event-session
interface and the removal of the nitpicker's periodic way of operation.
The patch fixes the problem by applying pending focus changes not only
at the input processing but also on the code path that responds to focus
changes (e.g., focus-rom update).
Issue #3812
Instead of using the old 'ioctl' Vfs::File_io_services API implement
the I/O control functionality in a buch of files. This is similar to
the terminal-VFS plugin.
Fixes#3889.
The combination of Net::Mac_address and
Genode::ascii_to(Net::Mac_address) required shaky quirks in several
places because GCC is not able to resolve the ascii_to overload if
base/xml_node.h was included to early. The current solution moves the
several ascii_to overloads "closer" to the Net types by putting them
into the Net namespace, where GCC reliably picks them up.
Hence, co-locating the ascii_to() utility with the overload type in the
same scope/namespace is good practice.
This patch removes the now obsolete <nic/xml_node.h> header file.
* Fixes faulty algorithm in fractional pll rate calculation
* Enables clocks that are set as reference clock to prevent system freeze
* Enables/disables root clocks of gates implicitely
Fix#3876
This is needed to enable VFS plugins to notify VFS clients about file
changes that depend on the plugin configuration, E.g., whenever the vfs_ttf
plugin responds to a font-size change, it generates a watch notification
for the glyphs file. Since the change is independent from I/O, we need
to manually call 'handle_io_progress'.
With the change of nitpicker to the event session interface, the
formerly periodic hovering updates moved to the - now sporadic - input
processing. This has the unfortunate side effect that hovering changes
caused by non-user-input, in particular view-stack changes issued by the
GUI clients that change the view under the current pointer position,
would no longer be reported immediately but only after receiving the
next incoming input event.
This patch reworks the hover handling such that potential hovering
changes due to view-stack operations are evaluated immediately by
those operations, covering the update of the hover report and the
generation of artificial enter/motion events.
Issue #3812
This patch solves a corner case where one long-active job (e.g.,
read-ready request) stays at the beginning of the '_active_jobs' queue
without an ack. In this case, the '_try_acknowledge_jobs' method would
wrongly stop processing the subsequent acknowledgements. In practice,
this can lead to a delayed sending of acknowledgements until new I/O or
client requests occur. In particular, Vim in Sculpt's inspect window
sometimes did not immediately respond to key presses during tab
completion. Here, the read-ready request of the terminal prevented the
acknowledgement for read of directory entry from being delivered until
the next key was pressed.
Fixes#3873
The quota for the argument buffer is already accounted by using the
Attached_ram_dataspace _argument_buffer, which uses the Constraint_ram_allocator
_ram, which uses the Ram_quota_guard from the Session_object. Running on
Sculpt with more than 1000 Subject_info objects/trace IDs the memory
waste become noticeable.
By now, the enumeration of peripheral interrupts on Raspberry Pi 1 was
different in between base-hw kernel and Fiasco.OC. Therefore, hacks were
needed in every driver to request the correct interrupt number dependent
on the kernel. Before reproducing the same in the platform driver for rpi,
we can more easily use the same enumeration with base-hw.
Ref #3864
This is a temporary workaround to not harm drivers, which aren't
converted yet to request all device resources including power and
clocks from this new platform driver.
Ref #3863
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
When the 'raw' attribute is set to 'yes' the terminal VFS plugin will
ignore control characters. This in necessary for terminal connections
that transport data that contain such characters as part of message.
Fixes#3860.
The driver wrongly rejected a block request for the very last block of
the device, which prevented part_block from successfully parsing the
partition table (when attempting to access the GPT backup).
Fixes#3861
This is a follow-up commit to "nitpicker: make framebuffer and input
optional". It restores the dynamic mode-change support when using
'request_framebuffer="yes"' as needed in scenarios where multiple
nitpicker instances are used in a cascaded way. E.g., Sculpt's
Leitzentrale. The previous version missed to reconstruct the
'_fb_screen' on mode changes.
Issue #3812
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch brings the input filter into a shape that is easier to
re-mold into an event filter, reversing the client/server roles of
the component.
* The 'Sink &destination' is no longer passed as constructor argument
to the individual filters but passed as argument to the 'generate'
method. This way, the final destination does not need to exist at
the construction time of the filter chain but can be created on
the fly (clearing the way for using 'Event::Client::with_batch').
* A new 'Source::Filter' interface with the 'apply' method aids the
cascading of filters during 'generate'. The modules now implement
the 'Source::Filter::filter_event' interface instead of the
'Source::Sink::submit_event' interface.
* Since the 'Sink &destination' is no longer a member of the filter
modules, character-repeat events can no longer be emitted in an
ad-hoc way. Instead, the character-repeat mechanism now invokes
a new 'Trigger::trigger_generate' hook that prompts the execution
of the regular 'generate' mechanism by the main program.
This patch is supposed to leave the semantics of the input filter
unchanged (validated by the input_filter.run script).
Issue #3827
This is an intermediate helper component for the transition of input
servers into event clients. It works analogously to the
input_event_bridge but it connects servers instead of clients.
In particular, it can act as glue between a traditional input driver
that provides an input service and the event filter that provides an
event service. Thanks to this component, each driver can be migrated to
the event-client interface individually.
Issue #3827
- base/cancelable_lock.h becomes base/lock.h
- all members become private within base/lock.h
- solely Mutex and Blockade are friends to use base/lock.h
Fixes#3819
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
This patch replaces meta-data allocation during the resize handling by a
new 'Resizeable_texture' type that has all meta data preallocated.
It also replaces the use of pointer return values with the
'Resizeable_texture::with_texture' method.
Issue #3812
Nitpicker used to unconditionally request a framebuffer and input
session. With the transition to the new capture/event session
interfaces, this built-in policy does no longer suffice.
This patch introduces the attributes 'request_framebuffer="yes"' and
'request_input="yes"' (with the default values shown) to nitpicker's
<config> node. If setting those attributes to "no", nitpicker won't
request a "Framebuffer" and "Input" session respectively.
Issue #3812
In the presence of potentially multiple output back ends, this
dirty_rect state must be maintained individually per back end. Instead
of storing the dirty_rect as view-stack member, the view stack now calls
a new 'Damage::mark_as_damaged' interface, which allows nitpicker to
propagate this information to multiple back ends. Unfortunately, the
patch must remove the per-view dirty_rect state.
Issue #3812
This patch simplifies the internal naming of the nitpicker GUI server as
a preparatory step for adding support for the capture session interface.
Issue #3812
* Differentiate in between different architectures with assembler routines
for correct measures
* Automate first step measuring of 10G bogomips across different hardware
Fix#3785
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
The 'vfs_block' component will give access to a VFS file through a
Block session. For more detailed information please look at its
README.
(On a technical note, the server currently only allows for one
active session and has only one pending back end request but can
easily be extended in the future.)
Fixes#3781.
Setting the 'size' attribute will restrict a reader to consume
0s up to the specified amount per VFS handle. The attribute is
parsed as 'Number_of_bytes', which will limit the amount to the
maximum of the addressable memory on the platform.
This addition comes in handy when needing to provide a synthetic
empty file with a fixed size.
Issue #3781.
So far the condition whether to spawn a new job or not depended on
the amount of data already processed. This could lead to spawning
more jobs than necessary if batching is used and in return could
result in creating invalid requests in case the tested block session
is not large enough.
In addition to checking the amount of data the test now stores the
number of the last block and checks if the current request is in
range. This properly limits the total amount of requests.
Issue #3781.
The seek offset has to be updated on partial writes according to the
current write position. Otherwise writes will override the content
at the initial offset.
Fixes#3780.
The blit API archive missed the CPU-architecture-specific variants of
the blit library such that all depot binaries worked with the generic
(slow) fallback implementation. This patch adds the missing pieces to
the blit API archive.
To enable logging of ROM session deliveries, set the "diag" on
session routes:
<route>
<service name="ROM" label_prefix="/bin/">
<child name="cached_fs_rom" diag="yes"/>
</service>
…
<route>
Fix#3772
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
* Remove input driver specific to i.MX53 tablet board from QSB driver pkg
* Move GPIO settings for QSB LVDS backlight out of framebuffer driver into
GPIO driver config
* Move PWM driver functionality out of framebuffer driver
* Make framebuffer driver configureable, and less dependent on
platform driver i.MX53 specifics
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
The former ldso-startup static library (now called ldso_so_support) is
used to spice each shared object/library with local support code for the
dynamic linker (execution of static constructors and ARM-EABI).
Therefore, the library must be statically linked to each dynamic
library.
As a result recipes for dynamic libraries must always depend on the "so"
API, which makes ldso_so_support.mk and so_support.c available
independent of "base". Additionally, ldso_so_support is also provided in
the libc API to cut the dependency early for libc/posix libraries.
Issue #3720
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
The sandbox library supports the forwarding of session requests from the
outside to one of the hosted children according to a policy. This patch
introduces the distinction between two cases, which previously triggered
the denial of the session request.
- There exists no matching policy for the requested session
- There exists a matching policy but the referred server child
does not exist (yet)
Whereas the proper response to the first case is the denial of the
request, the second case can occur in situation where a dynamic init is
used to implement a staged startup, for example via the deploy
mechanism. In such cases, a policy may exist as a static rule while the
server has not been started yet. This patch changes the behavior such
that such requests are stalled.
The patch is accompanied with test cases for exercising both situations.
Fixes#3733
- don't use 'qemu -serial mon:stdio' anymore as it no longer works as
expected
- use "bash -l" with [terminal] to read user's profile configuration,
e.g., PATH settings
- added missing boot modules and cap quotas
As a result of the API change the memory handling could be simplified.
Since the Block session dataspace is now directly used for DMA, we
actually only have to provide the memory for setting up PRP lists for
large requests (for the moment more than 8 KiB of data).
As we limit the maximum data transfer length to 2 MiB, we get by with
just a page per request. Those memory is allocated beforehand for the
maximum number of I/O requests, which got bumbed to 512 entries. Since
not all NVMe controllers support such large a maximum data transfer
length and this many entries, especially older ones, the values are
capped according to the properties of the controller during
initialization. (The memory demands of the component are around 3 MiB
due to setting up for the common case, even if a particular controller
is only able to make use of less.)
(Although there are controllers whose maximum memory page size is more
than 4K, the driver is hardcoded to solely use 4K pages.)
In addition to those changes, the driver now supports the 'SYNC' and
'TRIM' operations of the Block session by using the NVMe 'FLUSH' and
'WRITE_ZEROS' commands.
Fixes#3702.
The update modification timestamp is implemented as one-shot where
the caller is expected to try again if the first attempt failed (see
current libc implementation). So the message is misleading as further
attempts might succeed.
Issue #3713.
This patch fixes a regression with run/log_core introduced by
2064ffd64b nova: support multidimensional affinity space
The run tool uses a log message 'run_boot_string' to detect successful
boot as well as to detect unexpected reboots. This message should never
be logged twice and, thus, should not be part of the core_log. The patch
mentioned above moved the former run_boot_string after the core_log
initialization.
The tar vfs plugin returns an inode value of zero and a type directory
for null records, which wrongly triggers the file-system loop detection
of the find utility. This patch returns the node pointer as inode value
instead, which is a unique value.
Fixes#3695
This patch changes the 'Single_file_system' to return NO_PERM only if
the to-be-unlinked file corresponds to the single file. This way, a
<rom> co-mounted with a <ram> file-system does not stand in the way of
unlinking files from the <ram>. The concrete symptom occurred the
following scenario:
<vfs>
<dir name="home">
<ram/>
<rom name="..."/>
</dir>
</vfs>
The following sequence of commands wrongly resulted in "Operation not
permitted":
$ mkdir -p /home/a/b/c
$ rm -f /home/a/b/c/d
In this case, rm should not fail (unlink should return ENOENT)
Fixes#3690
When updating the domain object of interfaces that stay with the same domain
during a reconfiguration, until now, the normal "detach raw" function was used.
This caused the old domain object to discard a dynamic IP config as all
interfaces detached. This caused interfaces also to discard network links
established with the old configuration although it wasn't necessary. Thus, now
we use a dedicated "detach" in case that an interface actually stays with its
domain. This new "detach" doesn't decrease the interface counter of the domain,
so, it'll not discard its dynamic IP config. If, however, during a
reconfiguration, there's no interface calling this function (all interfaces
move to another or no domain), the dynamic IP config is still discarded as
expected.
Fixes#3686
Until now, the DHCP client was called also for DHCP requests when an interface
had a domain but yet no IP config. Now, an interface distinguishes between DHCP
requests and replies first and then accordingly calls the DHCP server or the
DHCP client if they're available. This also prevents that the DHCP client has
to handle packet headers other than that of DHCP.
Fixes#3681
Let the DHCP client be a constructible member of Interface that is constructed
only as long as the interface is attached to a domain with a dynamic IP config.
This prevents DHCP client timeouts from a period with dynamic IP config to
trigger after a reconfiguration to a static IP config. Furthermore, handle
DHCP-reply packets at an interface only when the DHCP client its constructed.
Otherwise drop such packets.
Ref #3681
This commit fixes the following issues regarding cache maintainance
under ARM:
* read out I-, and D-cache line size at runtime and use the correct one
* remove 'update_data_region' call from unprivileged syscalls
* rename 'update_instr_region' syscall to 'cache_coherent_region' to
reflect what it doing, namely make I-, and D-cache coherent
* restrict 'cache_coherent_region' syscall to one page at a time
* lookup the region given in a 'cache_coherent_region' syscall in the
page-table of the PD to prevent machine exceptions in the kernel
* only clean D-cache lines, do not invalidate them when pages where
added on Cortex-A8 and ARMv6 (MMU sees phys. memory here)
* remove unused code relicts of cache maintainance
In addition it introduces per architecture memory clearance functions
used by core, when preparing new dataspaces. Thereby, it optimizes:
* on ARMv7 using per-word assignments
* on ARMv8 using cacheline zeroing
* on x86_64 using 'rept stosq' assembler instruction
Fix#3685
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
- use two disks with two partitions each
- one disk uses MBR and one GPT
- connect one 'part_block' to each disk
- run 'block_tester' and 'test-block-client' connecting to one partiion
on each disk
- x86 uses 'ahci_drv' as disk back-end, Linux 'lx_block'
- on autopilot enable for Qemu only
issue #3671
net:
* increase queue size to 1024 (more stable on Linux)
* use mac address from Nic session instead of random one
* handle data that is larger than rx descriptor correctly (copy less)
* clear descriptor header (12 bytes) on rx
generic:
* always use 'avail_idx' (tx and rx)
* added barriers when reading/writing queues (TMP)
Ref #3620
We do not use the VMM with several CPUs until now.
On the other hand there is a dead-lock due to the
generic timer calling the cpu handler function explicitly,
which already holds the lock. For the time-being remove the lock.
Ref #3620
- use Job API as block connection back end
- use Request_stream API as front end
- use Mmio framework for gpt and mbr parsing
- implement sync correctly
fixes#3652
When specifying "/" or "" as rel_path to the 'Directory' constructor,
the constructed directory should refer to the same directory. The
implementation of the join utility did not consider this corner case. It
occurred during the attempt to use fs_query with "/" given as path.
This patch also adds a Directory::Entry::dir accessor that returns true
if the entry is a directory.
Fixes#3630
- Remove dated 'Block::Driver' front end and implement
'Block::Request_stream' front end
- Remove all dynamic memory allocations but DMA memory allocations
- Remove 'Platform_hba' and implement platform specific functions in
'spec/<platform>/*'
- Ata and Atapi don't inherit from 'Port' any more, but are a member of
'Port' as a protocol implementation
- Use platform driver for MMIO mappings (x86)
- Exchange stateful initialization of Ata/Atapi with a sequential
initialization using 'wait_for_any' and 'retry' patterns
- Fix Atapi initialization by setting the byte count limit
- Set FIS receive base only when Cmd::FRE is disabled and Cmd::FR is 0
- Put everything in namespaces ('Ahci', 'Ata', or 'Atapi')
- Ata decides during read/write operations to use native-command queuing
or normal DMA requests
- Remove port claiming logic (is now done via 'Constructibles')
fixes#3636
The ARP destination MAC was set to the Ethernet source MAC which is not
necessarily the MAC of the other ARP peer. Instead use the ARP source MAC of
the ARP request.
Especially the initial reset ended up with an unusable keyboard in rare
cases before. This commit disables keyboard and mouse handling of i8042
during command sequences according to a note from
https://www.win.tue.nl/~aeb/linux/kbd/scancodes-12.html
An invalid ROM dataspace can occur, for example, when requesting a ROM
from the report_rom service before the first report was posted. Such a
<rom> node can still be useful if it's dynamic. E.g., it can be watched.
Hence, the corner case of an invalid ROM dataspace should be gracefully
handled instead of causing an abort.
Issue #3606
This patch adds a special variant of a 'Content_producer' called
'Xml_producer', which allows the direct use of an 'Xml_generator'
for generating the ROM-module content.
This patch extracts the child-management functionality from the init
component into a new library called "sandbox". The library API is
located at 'os/include/os/sandbox.h'.
The sandbox API allows for the interaction of the component with the
sandboxed children by providing locally implemented services. This
mechanism is illustrated by the new test at os/src/test/sandbox.
Issue #3601
This patch extends the 'Buffered_xml' utility with a new constructor
that fills the buffer with the output of an 'Xml_generator'. It thereby
presents an easy way to generate XML to be consumed locally.
The patch also add a deprecation mark to the original 'xml' accessor
because copying 'Xml_node' objects (here as return value) is dangerous.
The new 'with_xml_node' method should instead be used to access the XML
content stored in the buffer.
Fixes#3602
`volatile` effectively prevents instruction reordering by the compiler
and fixes an issue with -O3 compiled components.
Note, this commit does not address further arguments regarding memory
barriers and volatile voiced in issue #693.
Issue #693
This patch addresses a corner case where the nitpicker focus is not
solely defined by mouse clicks or (exclusively) by a window manager, but
by a policy component that takes mouse clicks and other policy (e.g.,
a lock screen) into account. It ensures that each click that follows a
focus change (however initiated) results in a new "clicked" report even
when the report looks the same. To allow the policy component to
uniquely distiguish subsequent reports, the report features a new
'version' attribute.
Fixes#3493
This is a follow-up patch for issue #1784 that solves two
inconsistencies.
- The Vfs::Timestamp::INVALID matches File_system::Timestamp::INVALID
- The Noux libc plugin tests for Timestamp::INVALID instead of a
positive value.
The patch fixes the mtime info as shown in directory listings in
Sculpt's inspect window.
This patch let the VFS server reflect the session policy via the
writeable bit in directory entries instead of merely forwarding the bit
from the respective VFS plugin. This way, all files originating from a
read-only file-system session automatically appear in directory listings
as read-only files.
Related to issue #3507
This patch prevents the driver from translating Insufficient_ram_quota
and Insufficient_cap_quota exceptions to Service_denied exceptions at
session-creation time. This enables the client to respond to such a
condition by retrying the session creation with increased session quota.
Add a new plugin for creating pipes between pairs of VFS handles. It is
intended to replace the libc_pipe plugin, one of the last remaining libc
plugins.
In contrast to the libc_pipe plugin, this plugin defers cross-handle
notification until I/O signal handling rather than block and unblock
readers using a semaphore. This is a performance regression in the case
of multiple threads blocking on a pipe, but shall be an intermediate
mechanism pending renovations within the libc VFS and threading layers.
As a side effect, threads blocked on a pipe might not be resumed until
the main thread suspends and dispatches I/O signals.
The "test-libc_pipe" test has been adjusted to use the VFS pipe plugin
and tests both local pipes and pipes hosted remotely in the VFS server.
Merge adaptations (such as EOF handling, adjustment to VFS/libc
interface changes) by Norman Feske.
Fix#2303
This patch reworks the VFS server to become easier to understand.
- The packet-stream handling is hidden from the node types.
- Introduced the notion of a "job" as an abstraction from the raw packet
stream.
- The processing of requests is split into three phases:
(1) accepting new jobs,
(2) the execution of jobs, and
(3) the delivery of acknowledgements.
- There is no longer a global fifo of pending nodes. Instead, each
session has a fifo of "active" nodes, which are nodes that wait
for the completion of jobs.
- The Io_node type no longer uses virtual functions as hooks for
the derrived classes. Instead, it provides a number of utility
functions.
- The control flow of the 'Io_progress_handler' is now the same as
for the session-local packet-stream handler.
- Removed dependency from 'file_system/node.h', which is a relic
from the ram_fs.
While reworking the code, the following semantic changes were made
additionally.
- The handling of SEEK_TAIL no longer overwrites the file content at the
end of the file.
- Removed diagnostic message at session-creation time.
- Write loop for continuous files
Issue #3547
Issue #2303
This change allows for the conversion of directory entries in place
(i.e., in the VFS server) and anticipates the potential future merge of
both types into one.
Issue #3547
This patch equips the VFS terminal file system with the ability to
detect user interrupts in the incoming data stream, and propagate this
information via the new pseudo file '.terminal/interrupts'. Each time,
the user presses control-c in the terminal, the value stored in this
pseudo file is increased. Thereby, a VFS client can watch this file to
get notified about the occurrences of user interrupts.
Fixes#3546
The scratch buffer is now allocated from the heap and is shared
between the test as they are executed in a serial fashion. This
change saves memory as the test are constructed at start-up.
Fixes#3539.
This patch adds support for watch notifications for the
'Readonly_value_file_system', which is often used by VFS plugins to
implement pseudo files. It thereby enables VFS clients to respond to
VFS-plugin events (think of terminal resize) dynamically.
Fixes#3523
Uplink labels were stored in the uplink objects as reference. As uplink objects
may be re-used on re-configuration to avoid unnecessary closing and re-opening
of NIC sessions, the label reference could get invalid as the object that
stored the label content didn't get re-used. Thus, the label is now copied to
the uplink object.
Fixes#3529
This adds two new boolean attributes to the <report> tag of the NIC router
configuration 'link_state' and 'link_state_triggers'. The former decides
whether to report the link state of each NIC interface (downlink, uplinks) at
the NIC router. The other decides whether to trigger reporting each time the
link state of an interface changes.
Fixes#3527
If a MAC address was once allocated for a downlink and during the further
creation of the downlink an exception caused the creation to be aborted, the
NIC router didn't free the MAC address again.
Ref #3525
The handling of exceptions during session creation implies freeing and
detaching the RAM DS behind the session env and session component. But this
was done using the session env located in the same RAM DS, which must
lead to problems. Now, the session env from the RAM DS is copied to the stack
and the operations are done on this temporary instance instead.
Ref #3525
When the construction of a member of Packet_stream_*::Rpc_object after
the _cap member threw an exception, the object was not dissolved from
the entrypoint although the Rpc_object vanished at this point. This was
because the call to 'manage()' happened in the initializer list (for the
_cap member instantiation). The destruction of the _cap member then did
not dissolve the object.
This first fix moves the call to 'manage()' into the constructor body
after the instantiation of all other members. A more sophisticated fix
would use some kind of 'Managed_object' life-time guard that manages an
object on construction and dissolves on destruction.
Ref #3525
When re-configuring a domain from using a static IP config to using a dynamic
IP config, attached interfaces didn't react with doing DHCP discover. This bug
is fixed now and the nic_router_flood test was adapted in a way that it tests
the described behavior.
Fix#3518
Nowadays, we use standard command-line tools like vim to edit init
configurations dynamically, which alleviates the need for a custom CLI.
The CLI-monitor component was too limited for use cases like Sculpt
anyway.
The patch also removes the ancient (and untested for long time)
terminal_mux.run script, which used to be the only remaining user of the
CLI monitor.
Issue #3512
This driver manually checks if the RAM quota is big enough for the
Lan9118 nic session component. The problem is Root_component::_create
from which Root_component::_create_session gets called does already
check this. No need to account for it twice.
Fixes#3514
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
Moving the handling into the input-session clients enables more
sophisticated implementations (like Qt5) to apply key-symbol based
handling of those modifiers like correct CTRL-A with QWERTY and AZERTY
layouts and distinction of CTRL-J and Return.
Issue #3483
The API still exports 32-bit address and size values only, which works
as the actual MMIO resources are allocated in platform_drv internally.
Fixes#3494
Map ACPI tables entirely as one dataspaces (not page-by-page). Note, the
current approach does only merge overlapping but not consecutive I/O
memory regions, which would reduce the amount of capabilities required
even further.
Fixes#3495
This adds complete character-generator configurations for English (US),
German (Germany and Switzerland), and French (France and Switzerland).
The configs are manually amended and stripped-down versions of
xkb2ifcfg generated configs.
Issue #3483
The Press event is actually a Press_char event with a default codepoint.
The default codepoint is now
Codepoint { Codepoint::INVALID } /* value 0xfffe */
in contrast to
Codepoint { Input::Event::INVALID } /* value 0 */
Issue #3483
