Issue #3967
triggers using -O0 with test-libc_integration:
libc_integration/main.cc:146: undefined reference to `std::istream::operator>>(unsigned long&)'
contrib/stdcxx-80f380143250d4f951433876698b54fdac32b95f/include/stdcxx/std/thread:67: undefined reference to `vtable for std:🧵:_State'
Introduce a new _overflowed state variable to indicate whether the
horizontal boundary was reached already and to omit subsequent character
output.
This state is necessary to maintain a valid cursor position at all
times. The _overflowed attribute is reset once the cursor is moved into
a valid position again.
To harmonise the bounds checking for _cursor_pos modifications, the
`constrain()` method was added.
Fixesgenodelabs/genode#4093
Also fixes a bug in `vpa()` and `vpb()` which moved the cursor
horizontally instead of vertically.
The direct execution of application-level code by a watch handler is
troublesome because those handlers are executed at the I/O signal level.
In the concrete case, the watch handler got recursively called because
the handler called _handle_config (application-code), which called the
VFS, which in turn performed a wait_and_dispatch_one_io_signal, which
again invoked the watch handler.
The patch works around the problem by letting the watch notification
trigger the application-level signal for the _config_handler.
Fixes#4091
I created a test program which stresses the interplay between libc,
pthreads and vfs_pipe and may detect regressions.
The program starts a thread that spawns a bunch of workers, sends and
receives data to them through a pipe. When all data of a worker is
collected, the worker is finished (join()) and a new worker is started.
Both the number of bytes sent to the worker and the size of its
answer are random.
Issue #3967
* The device XML information dataspace is only provided,
when the client's policy states `info="yes"`
* The device XM information gets changed to include the
physical resource names (I/O memory and IRQ addresses)
instead of virtual ids and page offset
Fix#4077
As linux drivers may distinguish device configuration by pci subdevice id in
addition to the pci device id, the former must also be used for finding the
matching entry. Otherwise, e.g., the iwlwifi driver might load the wrong
firmware.
Side note: Add break statement to save superfluous iterations after
match was identified.
Fixes genodelabs#4076
This is a follow-up fix for "Streamline platform-device API on ARM".
There is an ambiguity of the 'local_addr' method between the inherited
'Attached_dataspace' and the local declaration, which results in the
double application of the sub-page Range::start.
Issue #4075
This compilation unit contains a global constructor, which violates our
assumption that the libc is free of global constructors on ARMv7.
Specifically, the graphical terminal fails with the following message:
[init -> terminal] Error: Component::construct() returned without executing
pending static constructors (fix by calling
Genode::Env::exec_static_constructors())
[init -> terminal] Error: Uncaught exception of type 'Linker::Fatal'
In this case, the libc-less terminal uses the VFS. The VFS mounts the
ttf VFS plugin. The ttf VFS plugin depends on the libc.
The compilation unit 'arm_initfini.c' can safely be excluded because it
merely initializes the global '_libc_arm_fpu_present' variable, which
is not used by the current version of our libc/libm.
Fixes#4080
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of
- Platform::Device - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq - interface for receiving device interrupts
The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.
Fixes#4075
This patch adjusts the matching of the IP address such that the external
IP address is used as opposed the the NAT-local address. It is follow-up
fix of the conversion to the uplink session interface.
Issue #3961
When we allowed symbol resolution during exceptions, we used the shared
object lock to protect ELF object list manipulation (e.g., dlopen,
dclose) when executing exception unwinding code in the linker.
Unfortunately, sometimes libraries that are loaded by 'dlopen' may raise
exceptions in the process, leading to a deadlock within the unwind code.
In order to resolve this, we now protect the object list operations
(i.e., enqueue, removal, iteration) by a separate mutex. This allows
the shared object interface to throw exceptions.
issue #4071
This patch unifies the core-internal 'Mapping' type across all base
platforms.
As one minor downside on seL4, the diagnostic error messages when
observing faults other than page faults no longer print the faulting
thread and PD names.
Issue #2243
These messages pollute the boot log of Sculpt OS when ROM modules are
requested for files of the config fs before the sculpt manager has
created their first version.
When the own cap quota of a client does not suffice for a cap upgrade of
an existing session to a server, the client must issue a cap-resource
request to the parent. This logic was already in place for RAM quota but
was missing for cap quota.
Issue #4072
When callback functions of `dl_iterate_phdr` required further jump slot
relocations this lead to a deadlock. Therefore, we allow the resolution
of further symbols from callback functions, but protect the ELF object
list during the iteration, which blocks any dynamic loading (e.g.,
dlopen/dlcose) of shared object by other threads while in program header
iteration.
fixes#4071
Apparently the skewed motion timings came from the issue fixed by
"timer: restore semantics of periodic timeout 0". With the current
version of the timer, the original motion parameters work just fine.
This patch extends the 'Platform_session::alloc_dma_buffer' interface
with a 'Cache' argument that corresponds to the argument accepted by
'Ram_allocator::alloc', which is used by the platform driver under the
hood.
Since the x86 platform driver used to be hardwired to allocate DMA
buffers as UNCACHED, I adjusted all drivers by specifying the UNCACHED
argument. Right now, this is needed as a hint for core to steer the
allocation of I/O page tables. Once we eliminate the need for such hints
(by introducing an explicit 'Region_map::attach_dma' operation), we can
revisit the drivers individually because cached DMA buffers should
generally be fine on the x86 architecture.
Issue #2243
This change avoids many repetetive Genode:: prefixes, making the code
easier to read. The patch also includes a few consistency fixes
regarding include guards and file headers. It also renames
Platform_device::String to Platform_device::Device:name.
Issue #2243
This patch adds the designated alternative to Dataspace::phys_addr to
the platform-session interface. Under the hood, the platform driver
still calls Dataspace::phys_addr but it should eventuelly become the
only caller before we can abolish this function.
Issue #2243
This commit optimizes the 'Child::resolve_session_request'
implementation by introducing an internal 'Route_model' for quickly
traversing routing rules instead of parsing XML on each session request.
Fixes#4068
This commit replaces the hand-crafted config processing by the use of
the 'List_model' utility. This has the following advantages:
- The parsing follows a common formalism that makes the code
easier to maintain and to understand. Several parts of the code
had to be changed (for the better) to make it fit the list model
approach. E.g., the child states have become more expressive
and logical.
- In the common case, the XML data is traversed only once, which
increases the parsing speed in dynamic scenarios.
- The code becomes easier to optimize. In particular, the patch skips
the re-evaluation of the session routing if no service is affected
by the config change.
The patch also revisits the init test by removing overly long sleep
phases and extending a few sleep phases that were too short when
executing the test on Qemu.
Issue #4068
This patch changes the 'alloc_aligned' interface as follows:
- The former 'from' and 'to' arguments are replaced by a single
'range' argument.
- The distinction of the use cases of regular allocations vs.
address-constrained allocations is now overed by a dedicated
overload instead of relying on a default argument.
- The 'align' argument has been changed from 'int' to 'unsigned'
to be better compatible with 'addr_t' and 'size_t'.
Fixes#4067
This patch avoids the RTC driver's aggressive polling during the
(CPU-bounded) boot of Sculpt OS. As the RTC is not needed during bootup,
this patch reduces the boot time (on Qemu) by 2-4 seconds.
Fixes#4065
GDB monitor re-uses internal parts of the sandbox library. It thereby
relies on the internal detail of how local headers are included (using
"" instead of the now usual practice <>). A seemingly unrelated change
"init/sandbox: avoid repetitive state reports" eventually broke the
build of the GDB monitor.
This patch makes the GDB monitor less reliant on the way of how the
sandbox includes headers internally.
It also fixes a few warnings caused by the double definition of
__GENODE__ (adding an missing include guard and making the #define
conditional).
Related to issue #4064
The 'Timer::Session::trigger_periodic' RPC function used to accept 0 as
a way to de-schedule the periodic processing. Several components such as
nitpicker relied on this special case. In "timeout: rework timeout
framework", the value of zero was silently clamped to 1, which has the
opposite effect: triggering signals at the maximum rate. This results in
a visible effect in Sculpt where the leitzentrale-nitpicker instance
produces a constant load of 2% CPU time.
This patch restores the original timer semantics by
- Documenting it in timer_session.h,
- Handling the case explicitly in the timer implementation, and
- Replacing the silent clamping of the unexpected value 0 passed
to the timeout framework by a diagnostic error message.
Issue #3884
This patch restores the ability to launch nitpicker within a gui_fb
window. It is a follow-up fix for "nitpicker: make framebuffer and input
optional".
Issue #3812
This patch enables sculpt to utilize the CPU reset mechanism via the
PS/2 controller as well as the information provided via the ACPI FADT
information. Whenever the /config/system file is changed to <system
state="reset"/>, both mechanisms are triggered.
Supporting both mechanisms is useful because the PS/2-based reset does
not work reliably on modern machines. The PS/2-based reset is useful in
the case when the FADT reset information refers to the PS/2 command
port. In this case, the platform driver is unable to access this port
because it is already handed out to the PS/2 driver. In this case, the
PS/2 driver kicks in.
Issue #2726
If 'system="yes"' is specified in the <config>, the platform driver now
monitors the content of the system ROM. Should the value become "reset",
a reset is triggered using information obtained from the ACPI driver.
Related to issue #2726
The change of the platform driver is needed to avoid a parsing error of
the ACPI ROM when encountering an unexpected <reset> node.
Thanks to Alexander Boettcher for the preventing the regression of #3829
and improving the adherence to the ACPI spec when parsing the reset type.
Related to issue #2726
This patch adds the handling neccessary for clients to upgrade the cap
quota of their GUI session. Until now, the upgrade mechanism supported
only RAM quota.
The limitation became visible once a client - in the particular case the
motif_decorator - attempted the cap upgrade of its GUI session. The cap
quota would arrive at the wm, but the wm would keep it instead of
forwarding the quota to nitpicker. This resulted in an infinite retry
loop at the motif_decorator, ultimatedly depleting all its cap quota.
The window manager infers the overall state from the intercepted input
events for the decorator and all GUI clients. However, each of those
parties have an independent input-event stream. Whereas the order of
events within one GUI session is strict, the order of events between GUI
sessions is arbitrary. The window manager wrongly relied on a global
event ordering to track the pointed-at GUI session.
The patch removes the assumption of a global event order by tracking the
relevant pointer state for each GUI session independently and evaluating
these states when propagating the pointer position to the decorator.
Fixes#4059
This commit modified bash's builtin mapping of character sequences to
readline-functionality to detect the sequence of the delete symbol as
generated by the terminal.
Fixes#4058
The commits adds the same configuration values as supported up to now by
the monolithic usb driver. In contrast to the original, by default all drivers
are started. Disabling a controller type is used by Sculpt, e.g. for OHCI if
running Sculpt inside Virtualbox.
The addition of further keyboard layouts would otherwise pollute the
config/ directory too much.
Caution: When updating Sculpt OS, don't reuse your existing
config/event_filter file unmodified! You need to replace the chargen
includes, pointing to the new location, e.g.,
<include rom="en_us.chargen"/>
<include rom="special.chargen"/>
must be changed to
<include rom="keyboard/en_us"/>
<include rom="keyboard/special"/>
Issue #4055
This patch extends the settings dialog with the ability to select the
keyboard layout between the options that are included in the sculpt
image. The manual configuration is of course still possible by editing
the /config/event_filter directly.
If both the fonts configuration and the event-filter configuration are
managed manually, the settings button and window are not displayed.
Fixes#4055
By sorting the reported output, all consumers of the reports become able
to rely on a deterministic order. For example, the file browser of
Sculpt OS, the launcher menu items, and the depot-selection items will
appear in a predictable order.
Fixes#4054
This patch adds session-routing options to connect components to the
capture/event interfaces of the global nitpicker GUI server or the
leitzentrale GUI server. It thereby enables the implementation of screen
capturing components, remote management tools, or virtual keyboards.
Since those services are very powerful, they are subsumed under the
"hardware" category of the component graph as opposed to the GUI
category, which guarantees the separation of clients.
Fixes#4053
This patch adds 4 priority levels to the runtime subsystem. The highest
priority is used for components that are critical for the operation of
Sculpt, in particular the Leitzentrale GUI. All regularly deployed
components are assigned the lowest priority by default.
With priorities available in the runtime subsystem, this patch flattens
the priority levels at the top-level init to only two levels and
overlays the priority bands of the drivers, leitzentrale, and runtime
subsystems into one priority band. This has three benenfits:
- This change prevents the starvation of the Leitzentrale GUI from a
spinning high-priority driver (issue #3997).
- The change will also ease the hosting of latency-critical components
in the runtime subsystem that are prioritized higher than regular
components, the storage stack, and the network stack.
- The Leitzentrale GUI remains always perfectly responsive regardless
of the workloads deployed from packages. In the previous version,
the runtime graph was sometimes stuttering on high system load.
Issue #4045
This patch avoids the repeated warning "read blocked until lwIP
interface is ready" by printing the message only once. Otherwise,
the log is flooded with those warnings when falkon web browser
is started on Sculpt OS without network connectivity.
In case there is no valid configuration the component used to mute
output by default. This, however, might lead to the assumption that
audio is not working at all. Instead set the master output volume to
50% and the per application volume to 100%.
Fixes#4043.
This patch adds the missing destruction of session-state objects of
local services when closing a session. Because of the missing
destruction, those session-state object remained part of the server
ID space. This becomes a problem once the backing store of the session
state object vanishes, that is when the client child gets removed from
the sandbox. Hence, the removal of a child with an open session to a
local service would lead to the corruption of the server ID space.
This patch adds the missing session.destroy() call.
Fixes#4044
This patch fixes a corner case where a child is destructed while a
asynchronous close request to a sibling server is still pending.
The child immediately discarded the session ID as the end of the
close-session processing, assuming that this ID is never to be needed
again. The session-state continues to exist to handle asynchrous close
protocol with the server.
However, if the child is destructed at this point (before the server
responded to the session request), the destruction of the child would
not cover the discharging of the session state because the session state
was no longer be part of the client's ID space. So once the asynchronous
close response from the server came in, the session state contained
stale information, in particular a stale closed_callback pointer.
The patch fixes the problem by deferring the discarding of the client ID
to the point where the session state is actually destructed. So the
session of a pending close response is covered by the child destructor.
Thanks to Pirmin Duss for reporting this issue along with a test
scenario for reproducing it!
Fixes#4039
- Enable the "platform-level interrupt controller" PLIC on base-hw
- The RISC-V specification offers only a register description, but no
layout for the register set. This implies the layout is platform
dependent, and therefore, implemented separately for Qemu
issue #4042
This patch triggers the immediate removal of part_block once the
discovery of a fresh inserted USB stick has completed. Without the
patch, part_block was retained until the runtime was reconfigured the
next time for other reasons (e.g., toggling an inspect view). Until the
next reconfituration, part_block tended to stand in the way of directly
assigning the USB device to a VM.
This patch increases the RAM quota of the nitpicker instance for the
leitzentrale to make it suffice for the buffering of content during
resize operations. This fixes a flickering artifact when having an
inspect view open while entering a WLAN passphrase. When the connect
button appears or disappears (depending on the number of written
characters), some parts of the inspect terminal would flicker sometimes.
* catch every possible path of the Bit_allocator_dynamic::Out_of_indices
exception
* add unconditional log output in the new "catch" directives, so, we will be
able to debug the problem a bit more in detail next time
Fixes#4036
This way, the redirected env sessions for the CPU burner are no longer
called directly by init. Init stays independent from the behavior of the
CPU balancer.
Issue #3837
Issue #4029
This shim component can be used in case where env sessions of child
(i.e., child's PD session) must be routed to another child of init.
Without the shim, init would directly need to interact with these
sessions and would thereby make itself dependent of the server's
behavior. RPC calls to a server hosted as a child lead to all kinds of
problems such as livelock situations, and putting the robustness of init
at the whim of its child.
With the shim, init merely needs to bootstrap the shim component by
routing the shim's env sessions to core as usual. The server is only
used for the sessions for the actual application hosted atop the shim.
Issue #3837
Issue #4029
This patch is an interim fix for using HID devices that offer a HID
interface as not the first interface. It also supplements the
interface classes as supplemental information to the USB-devices
report.
Fixes#4035
With this patch, the board/<name>/arch property file can have multiple
lines where each line denotes an instruction-set architecture supported
for the board.
Issue #4019Fixes#4034
Simplify calculation of Timer::_duration, the old implementation caused
the time running backwards sometimes. This makes
'nic_router_dhcp_*' and 'event_filter' run scripts succeed.
issue #4021
This prevents the log terminal from adjusting itself to the whole screen
size before the leitzentrale window layout is applied. This intermediate
size can otherwise exhaust the 8 MiB of RAM quota of the log terminal.
Issue #3970
Do not link base and core libraries into on large relocatable .o file,
which is linked later to core - causing long link times. Create an
independent library archive out of the base and core libraries that can
be linked faster.
issue #4027
This commit improves the performance of the pipe plugin by using local
signal handling and avoiding sending a signal during write when pipe
buffer is full.
Issue #3583
* Add new virtio device model
* Extend test run-script with vfat block test image
* Add vmm depot src recipe
* Use packages in test run-script
Fix#4025
* Introduce different index types for ring counters and descriptor arrays
within the Virtio split queue implementation
* Be more accurate in reporting the queue number supported, and raise it
to 512
* Introduce abstractions for mmio register access, where several values
are stored at the same place, and selector registers exist.
* Turn Virtio_device into a template to define the Virio queue type,
and its numbers per device model (needed for e.g., future block model)
Issue #4025
All pipe-ends were notified at the same time which leads to dead-locks.
This commit mitigates this by having a signal handler for each pipe and
each pipe-end respectively.
Issue #3583
The vfs pipe plugin can now be used as named pipe which anables data
transfer via file handles from one component to another. E.g. if one
would like to send data from component A to stdin of a libc component B,
one can do so by simply writing to that fifo file.
Issue #3583
With this commit libcrypto does not use ARM NEON extension as long as
SPECS includes "neon". arm_v7a does declare "neon" per default while
arm_v8a does.
Issue #3773
Note, OpenSSL now comes as one combined depot archive *openssl* that
replaces the former *libssl* and *libcrypto* archives. The libraries are
still separate binaries for compatibility with legacy software.
Issue #3773
It seems that with the nigthly autopilot the data port (that is choosen by the
client) may stay some time (minutes) allocated after the a test run. This
causes successive tests to fail when trying to reuse the port.
* Use a unique data port for each target platform in the range of 18000-18099.
* Add documentation on how to prepare for running the test on a Linux target.
* Remove Qemu-specific code paths as Qemu isn't supported anymore by the script
since the introduction of the Uplink session (running with a NIC router on
Qemu was never supported and now we always need a NIC router).
Ref #3961
This patch simplifies the packaging of the base-hw kernel for a given
board, in particular when the board support is hosted as an external
repository such as genode-world. Regardless of where the board-support
is hosted, the content.mk file becomes as simple as:
include $(GENODE_DIR)/repos/base-hw/recipes/src/base-hw_content.inc
The board name is automatically inferred from the path of the src
recipe. The architecture is determined from board/<name>/arch files,
following the pattern of the image_link_address. The attempt to build a
base-hw-<board> binary archive for the wrong architecture is now
gracefully handled by skipping all targets (using the REQUIRES
mechanism).
Besides the improved convenience, the patch results in depot archives
that are much closer tailored to the actual board by omitting files for
architectures that are not used by the board. E.g., the src/base-hw-pc
archive does not contain any ARM-related content.
The patch also restores the package builds for core/bootstrap object
files as a follow-up fix of "base: remove SPEC variables of boards",
which happened to left 'BOARD' undefined in the src archives.
Fixes#4019
Be more in line with the original host implementation in Qemu and
buffer transfers. Having transfers in-flight helps to smoothen playback
in case other components utilize the CPU.
Issue #4018.
Linux as well as Windows guests want queue to a varying number of
transfers, where each transfer only covers one transaction (iso frame).
The best results were obtained by following that behaviour rather
than queuing multiple iso frames per requests (like is done with OUT
transfers).
The number of requests queued is increased to 32 while the number of
packets per reques is decreased to 1.
Issue #4018.
The contrib code is updated from 2.4.1 to version 5.2.0 and the used
device-model is changed to QEMU xHCI. Due to this change older guests
OSes, namely Windows 7, that relied on the NEC xHCI device-model will
not work anymore.
The 'Qemu::Controller' interface was extended by an 'info' method, which
returns the vendor and product ID. This allows for removing the
hard-coded values in the VirtualBox glue code.
Issue #4018.
* Update the 'packet_size' information with the actual length for
each isoc frame to be able to handle short reads at the client side.
* Copy the whole transfer buffer because the host controller stores
the data at the original offsets, i.e., the buffer is not densely
packed.
Fixes#4018.
The former implemention assumed that the guest physical memory is
mapped continously. This, however, is not true. Writing larger
files to an USB stick with a Windows 10 guest would therefore lead
to data corruption.
The current implementation uses a bounce buffer to copy the data
to and from the guest physical memory and leaves dealing with the
memory mappings entirely up to the VMM.
Fixes#4017.
When the usb_net_drv was introduced in ports/run/netperf.inc, the
netperf_lxip_usb test on x86_64/hw/pc triggered the calling of the
netif_stop_queue dummy at
contrib/<DDE_LINUX>/src/drivers/usb_net/drivers/net/usb/usbnet.c:1464. As
netif_start_queue was also a dummy and allowed to be called, we tried allowing
calls to the netif_stop_queue dummy as well which fixed the
netperf_lxip_usb test on x86_64/hw/pc.
Ref #3961
The 'environ' pointer is a global variable that must be considered as
part of the application state. It must be copied from the parent to the
child process during fork. Otherwise, a child returning from fork is
unable to access environment variables before invoking execve. The
actual environment variables and their values are already captured
because they reside at the application heap, which is cloned from the
parent. So the copied 'environ' pointer refers to valid data.
Fixes#4015
- remove Spike/BBL support in favour of Qemu (>=4.2.1)
- add 'riscv_qemu' board, remove 'spike' board'
- update to privileged ISA v1.10 (from v1.9.1)
- use direct system calls for privileged core threads (they call into
the kernel and don't use mode changing system calls, i.e. 'ecall',
semantics)
- use 'OpenSBI' semtantics for SBI calls (to machine mode) instead of
BBL
issue #4012
By first removing unused ranges, implicitly meta data allocations are freed
up. This leads to more unused slab blocks and freed up meta data allocations
in the avl tree.
Issue #4014
The deadlock reported in #3236 could be reproduced via the wm.run script
and the modification of test/nitpicker in commit "nitpicker: fix destroy
with invalid handle" by clicking on the testnit entry of the launchpad.
This patch fixes the deadlock by releasing the locked pointer early in
the destruction path, which is legitimate as the wm is single-threaded.
Fixes#3236
This patch adds the missing invalidation of the _hovered pointer to
User_state::forget, which is required to cover the situation where the
owner of the hovered view vanishes.
Fixes#4011
Improve consistency with the other base repositories, in particular
- Indentation of class initializers
- Vertical whitespace around control-flow statements
- Preferably place control-flow statements (return, break, continue) at
beginning of a line
- Placing the opening brace of a namespace at the end of line
- Placing the opening brace of a class at a new line
- Removing superfluous braces around single statements
- Two empty lines between methods/functions in implementation files
This patch simplifies the use of ccache with the build system. Up until
now, each developer had to set up the ccache hooks manually, adjust the
PATH variable, and customize the etc/tools.conf in each build directory.
With the patch, ccache can be enabled by un-commenting a single line in
the etc/build.conf file.
Fixes#4004
The Usb session allows for submitting packets even when the interface
in question is not yet enabled. Enabling an interface will configure
the udev members properly and is normally done implicitly during
processing of an 'ALT_SETTING' packet.
In case the interface was not enabled this leads to a page-fault in
the USB host-controller driver as 'ep' is NULL.
Fixes#3999.
This patch moves the bootstrap-link-address information from the
tool/run/boot_dir/hw file to board-specific property files that can be
accessed by using the board as key. This eliminates the need to
customize boot_dir/hw when hosting board-support in an external
repository.
Fixes#3998
The Vmm::Gic::Gicd_banked::Redistributor is used with Constructible, but
does not have a virtual destructor even though it has virtual methods.
This prompts clang to issue the following warning:
reconstructible.h:122:4: warning: destructor called on non-final
'Vmm::Gic::Gicd_banked::Redistributor' that has virtual functions
but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
Fix this by inheriting Genode::Interface.
Issue #3984
Even though the binary patching of ldso must be performed only once,
this postprocessing step was executed on each run because the
postprocess.tag rule is phony (the tag file is never created).
This patch removes this phony behavior by creating the tag file.
Issue #3974
The _crt0_start_stack label points to a memory location containing the
size of the bootstrap stack. On AArch64 this should be an 8 byte value,
but the code only only defines half of those using asm .long statement.
The other half is expected to be 0, which is true when using GNU as.
This is not the case when using clang's integrated as however. Since
_crt0_stack_size is defined inside .text section clang uses 0xd503201f
value (aarch64 nop instruction) to fill the extra 4 bytes.
Fix this minor incompatibility by explicitly defining both halfs of
this 8 byte quantity.
Fixes#3987
The _dispatch_pending_io_signals and _original_suspended_callback member
variables are not used anywhere in the code. This prompts clang to produce
a warning message about it. Remove both variables to fix it.
Issue #3985
The "unsigned Nitpicker::Gui_session::layer()" function returns
~0UL. This prompts clang to produce a warning about implicit unsigned
long to unsigned int conversion. Fix it by returning ~0U instead of
~0UL.
Issue #3985
GCC doesn't care, but clang complains if [[fallthrough]] is not followed
by a semicolon. Existing Genode code is also not consitent in this regard.
This patch adds the extra semicolons since it works in both GCC and
clang.
Issue #3985
No code in this class uses this private member variable. This prompts
clang to produce a warning message about it. Fix it by dropping the
variable.
Issue #3985
The class has final destructor, but is not itself final. This prompts
clang to produce the following warning message:
class with destructor marked 'final' cannot be inherited from [-Wfinal-dtor-non-final-class]
~Vfs_plugin() final { }
^
vfs_plugin.h:39:13: note: mark 'Libc::Vfs_plugin' as 'final' to silence this warning
Issue #3985
This static inline function is not used anywhere. GCC does not care,
but clang warns about this. Remove the function to allow the code to
compile cleanly with both clang and GCC.
Issue #3985
The code in Libc::Cloned_malloc_heap_range initializes its local_addr
member variable by calling Region_map::attach_at. This function can
throw Region_conflict exception. The handler for this exception uses the
local_addr to produce an error message. Such error log is IHMO
useless, or even incorrect since the value of local_addr is undefined
in such case.
Its also worth noting that clang 12 produces the following warning for
this code:
"cannot refer to a non-static member from the handler of a constructor
function try block"
Issue #3985
This private member variable is not used anywhere in the code. This
produces compilation warning when using clang instead of GCC. Drop the
unused variable.
Issue #3985
The State enum and _state private member variable are not used anywhere.
This produces an extra warning when building the code with clang instead
of GCC. Remove this dead code.
Issue #3985
When building the code with clang the following warning message is
prodiced:
"explicit instantiation of 'Scout::Browser_window' must occur in namespace 'Scout'
template class Browser_window<Genode::Pixel_rgb888>"
This happens for several different types. This patch fixes the problem
by instantiating all those templates using their explicit full name.
Issue #3985
The Scout::Spacer constructor requires two arguments. The initialization
of the type in Launchpad_window declaration does not specify them. The
variable is however initialized a second time in class constructor. This is
most likely why GCC accepts this code. Clang on the other hand
complains about it.
Fix this by properly initializing both _spacer and _docview only once at
declaration time.
Issue #3985
The code fails to build with clang due to the following warning/error:
error: '_INCLUDE__NANO3D__SQRT_H_' is used as a header guard here,
followed by #define of a different macro [-Werror,-Wheader-guard]
Fix this by removing the extra underscore from this header guard
definition.
Issue #3985
The _device_specific_features() implements part of the Virtio_device
interface. Decorate it with override keyword to make this clear and
also satisfy clang which produces warning regarding this.
Issue #3984
Clang 11 produces the following warning when building port_allocator.cc:
port_allocator.cc:27:21: error: result of comparison of constant 65536 with
expression of type 'const Genode::uint16_t' (aka 'const unsigned short') is
always true [-Werror,-Wtautological-constant-out-of-range-compare]
(port.value < (unsigned)(Port_allocator::FIRST +
Basically the code compares Port::value (uint16_t) against a constant
65536 which is larger than UINT16_MAX (65535). This comparison will always
be true.
Issue #3984
According to clang there are two symbols which File_system can refer to:
1. namespace File_system from ram_fs/chunk.h.
2. Vfs::File_system class from vfs/file_system.h.
Make it clear we refer to the File_system namespace in this case.
Issue #3984
Clang 12 complains that Interface can both refer to Genode::Interface
and Net::Interface in this case. Explicitly state the code refers to
the latter.
Issue #3984
According to GNU as manual the syntax of this directive is:
.cfi_undefined register
The manual does not mention the register should be in parentheses.
This works in GNU as even when those are present, but unfortunately
clang integrated-as does not parse this correctly. Both GNU and
clang's integrated assembler work fine when the extra parentheses
are omitted.
Fixes#3986
The code in base-hw/src/bootstrap/platform.cc uses segment flags for
identification purposes. Based on this information the code decides
what to do with each segment. Unfortunately the linker script does
not actually ensure the flags for a specific named segment match
expectations. The code relies on implicit linker behaviour.
This implicit behaviour can vary between linkers. This breaks
arm_v7a base-hw builds linked with LLVM's lld linker. The segment
named "ro" ends up having writeable flag set when using LLD.
This patch ensures that all ELF segments in genode.ld have their
required perimssion flags set explicitly.
Fixes#3988
Clang is generally fine with Genode::List and compiles code using it
without emitting any warnings. There is however one exception. Clang
fails hard when building base-hw/src/core/kernel/object.cc.
This is due to a call to Genode::List::remove made from
Object_identity::invalidate function. The error message clang
produces is:
list.h:96:33: error: 'Genode::List<Kernel::Object_identity_reference>::Element::_next'
is not a member of class 'const Kernel::Object_identity'
_first = le->List::Element::_next;
~~~~~~~~~~~~~~~^
When we look at the declaration of the Kernel::Object class on which
the remove method is called. as expected it does inherit Genode::List:
using Object_identity_list
= Genode::List<Kernel::Object_identity>;
class Kernel::Object : private Object_identity_list
{
...
}
Given the error message we see that List::Element should be resolved to
Genode::List<Kernel::Object_identity>::Element, and not
Genode::List<Kernel::Object_identity_reference>::Element. But how does
clang manage to figure out we're talking about Object_identity_refecence
list here? Well, I admit I don't know the exact steps it takes to arrive
at this conclusion, but it is not entirely wrong. If we take a look at
what Kernel::Object_identity is we'll see:
class Kernel::Object_identity
: public Object_identity_list::Element,
public Kernel::Object_identity_reference_list
{
...
}
Where as one can guess Object_identity_reference_list is defined as:
using Object_identity_reference_list
= Genode::List<Object_identity_reference>;
Long story short Kernel::Object has Genode::List of both Kernel::Object_identity
and Kernel::Object_identity_reference in its inheritance chain and clang
is not really sure to which of those the code refers to in
Genode::List::remove method by using List::Element::.
The fix for this is relatively simple, explicitly state the full type of
the base class the code intends to refer to. Replacing List::Element,
with List<LT>::Element makes the code buildable with both clang and GCC.
Fixes#3990
If a fd is opened in append mode and just is to be used (so never written by
the parent component) for the to be forked child, the seek state was not
pointing to the end of the file. The wrong seek value then was used in
File_descriptor_allocator::generate_info().
Issue #3991
The fds in O_APPEND state may have changed by the child. The local seek
state needs to be valid/current for the next to be forked child, which seek
state is set by File_descriptor_allocator::generate_info().
Issue #3991
Avoid use of REP_DIR in *.mk files to simplify the use of these files as
templates for a board hosted in a separate repository.
Use REP_INC_DIR for searching headers, thereby considering headers
hosted in an external repository.
Issue #3168
This trace policy can be used as a fault-injection mechanism.
Once installed, the next time the traced thread passes a trace point
(e.g., RPC call, RPC request, ...), the policy produces a divide-by-zero
exception.
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
The new helper function returns a boolean value analoque to 'have_spec' if the
BOARD variable corresponds to the given value. It shall replace [have_spec <board>]
declarations in run-scripts.
Ref #3971
In order to perform a smooth transition from NIC drivers that act only as NIC
session clients to NIC drivers that act only as Uplink session clients, this
commit introduces an intermediate state in which all NIC drivers support both
modes. That said, a NIC drivers mode is now statically determined through a new
optional 'mode' attribute in the drivers <config> tag that can be set to either
'nic_server' (default value) or 'uplink_client'. Reconfiguring this attribute
at a driver doesn't have any effects. Whithout this attribute being set, all
NIC drivers will behave the same as they did before the commit. When set to
'uplink_client', however, instead of providing a Nic service, they request
an Uplink session whenever their network interface becomes "UP" and close the
session whenever their network interface becomes "DOWN".
Ref #3961
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Adds new Uplink session interface, the corresponding client side (Client,
Connection), and the corresponding API archives. An Uplink session is almost
the same as a NIC session with the difference that the roles of the end points
are swapped. An Uplink client is the one that provides a network interface
(for instance, a NIC driver) whereas an Uplink server is the one that uses
that network interface (for instance, a networking stack).
Therefore, in contrast to the NIC session, MAC address and link state come from
the Uplink client. The link state is reflected through the lifetime of an
Uplink session: The client requests the session only when the link state is
"UP" and closes it whenever the link state becomes "DOWN" again. The MAC
address is transmitted from the Uplink client to the Uplink server as an
argument of the session request.
Ref #3961
* Adds documentation how to prepare and finalize a Linux for running the
scenario ontop of it
* Adds consideration of env variable 'ON_LINUX_WITH_DST_IP' that, if set,
adapts the run script to running on Linux with the given ping destination IP
Ref #3961
This patch relaxes the need to specify the rom content of all pkg dependencies
in each runtime file. Whenever a dependency features a runtime file, the
contained <content> <rom/> ... </content> nodes are implicitely included.
Fixes#3981
- depending on available PCI power cap power off and on
- save and restore PCI bars if required
- reset PCI devices after power on if supported
Fixes#3963
using Register_set && Register. It is derived from Genode::Mmio, however uses
as backend the Config_access implementation which is still used widely in
the platform driver.
Issue #3963
Replace explicit usage of bus, device, function arguments to methods or
variables all over the code by a single data type. It eases the reading of and
shorten the code.
Issue #3963
The keys, mute, touchpad toggle (Fn-F4) and rfkill may be reported by some
Fujitsu machines via the ACPI FUJ02E3 ACPI device. With this commit limited
support to detect the 3 keys are added and will be reported as Genode report.
This patch complements the commit "nitpicker: defer hover changed while
dragging" with fixes of the window layouter and motif decorator.
- Handling of empty pointer model (after unhovering a decoration)
instead of not updating it.
- Re-applying the hover model to the window layout when leaving the
drag state. This addresses the corner case that the hover model
changed during the drag operation (which is rightfully not handled
while dragging).
- Letting the window layouter enter the drag state only if a dragged
window is defined.
Issue #3973
When holding at least one key or button, the hovering should never
change. In the previous version, this invariant was not enforced,
but the symptoms for eventual inconsistencies were masked by two
checkes: one when generating the hover report, and one when submitting
the leave event. This patch enforces the invariant by suppressing any
change of 'User_state::_hovered' while in dragged state.
Fixes#3973
When idle, the decorator still consumes a bit of CPU time when triggered
by the GUI session's sync signal. This patch installs the sync handler
each time the decorator goes idle.
During position scaling use the location width/height which is the permitted
dimension within the child space, instead of using the whole possible
child space. (Fixup for "init: scale affinity location" Issue #1412)
Thanks to the report by Peter.
* Introduce 'use_arp' configuration flag at the NIC router in order to disable
requesting IP-to-MAC address resolutions via ARP for domains.
* Add automated run/nic_router_disable_arp test to the autopilot that tests
the effect of the new flag
* Document the new flag and the new test in the NIC router README
Fixes#3935
Thise driver supports USB LTE modems for Huawais' ME906s through MBIM
and provides a traditional Nic session. The "control" interface is a
Terminal session, which can be used via libmbim/mbimcli.
issue #3822
This commit restores the diag feature for selecting diagnostic output of
services provided by core. This feature became unavailable with commit
"base: remove dependency from deprecated APIs", which hard-wired the
diag flag for core services to false.
To control this feature, three possible policies can be expressed in a
routing target of init's configuration:
* Forcing silence by specifying 'diag="no"'
* Enabling diagnostics by specifying 'diag="yes"'
* Forwarding the preference of the client by omitting the 'diag'
attribute
Fixes#3962
- Vendor devices add addtional data to the config descriptor, read and
added to the usb session
- allow '0' configuration within the usb session
issue #3822
The usb_hid driver does not need to distinguish between
normal memory and DMA capable memory, since all requests are routed via the
USB raw session to the usb host driver. The default Malloc implementation
implements this distinction, however exposes restrictions on the size of
allocations. As seen now by several USB HID devices, the size of device
driver allocations depend on read out hardware features and can be
larger than we support with our specialized default Malloc implementation.
Since we don't need this functionality, switching to an well
tested allocator (Heap) which can cope with varying sizes of allocation,
we can mitigate the size restriction.
Fixes#3953
* The NIC router now considers, memorizes, and, if configured, reports
multiple DHCP option 6 entries from DHCP replies that it received as DHCP
client
* A DHCP server at the NIC router can now be configured statically with
multiple DNS server addresses to propagate
* The 'dns_server_from' attribute of the DHCP server of the NIC router now
supports the forwarding of multiple DNS server addresses
* The automated run/nic_router_dhcp test tests all the above mentioned new
functionality and reconfiguring it at runtime. The test was added to the
autopilot.
* All run scripts were adapted to fit the new NIC router configuration
interface
Fixes#3952
When reconfiguring the NIC router modifies the information that DHCP clients
received through a DHCP server of the NIC router, the link state of the
correspodning interface has to do a "down-up" sequence. This provides a signal
to the DHCP clients to redo DHCP, receive the new information and update
accordingly.
Fixes#3931
* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
* Introduce sculpt-[board] specific package
* Move rtc driver into managed drivers sub-system
* Name nic_drv in a generic fashion in sculpt_manager
* Copy over pc-specific config files only when building for PC
Ref #3958
Originally the outgoing buffer was flush when the terminal was
detached. Since we cannot do that at this point, make the flushing
part of the common cleanup procedure.
Issue #3682.
Rather than calling 'ssh_disconnect' from within the Terminal session,
flag the detached terminal in the session and let the event loop do the
cleanup. Otherwise it might happen that the 'ep' (handling the Terminal
session) as well as the 'pthread.0' (executing the ssh event loop) end
up both triggering the cleanup concurrently.
Issue #3682.
In case of arm_v7a Kernel::call64 the syscall will use both r0 and r1 as
output registers. Unfortunately the inline asm does not reflect this and
only r0 is explicitly specified as output. GCC manages to produce output
which we'd like to see. Clang on the other hand takes adventage of the fact
r1 should not be touched by swi and produces fewer instructions which do
what the code describes, but not what we actually want.
Basically the code which we want and is generated by GCC is:
svc 0
mov r2, r0
mov r0, r1
mov r1, r2
bx lr
Clang on the other hand generates correct assembly given the code, but
incorrect given what the function is supposed to do:
svc 0
mov r1, r0
mov r0, #0
bx lr
Both GCC and clang generate the same, expected assembly output when r1
is marked as output register from the inline asm swi call.
Fixes#3951
Clang correctly asserts this private member variable is not used
anywhere in the code. I'm not sure what the intention of the code is,
might be this is a part of some unfinished feature. This patch just does
the minimum amount of work to allow the code to build with clang. If
required I can also drop the parent_levels constructor argument and
clean up the call sites.
Issue #3950
The msg argument in Genode::Rpc_dispatcher::_read_arg is not used. GCC
does not care about this, but clang does and prints a warning regaring
this. Silence it by removing unused argument name.
fixup! base: Silence unused arg warning in rpc_server.h
The CBE repository contained a lot of Genode-specific code despite the fact
that the CBE core logic is not bound to Genode in any way. Therefore the
Genode-specific CBE code is moved to the 'gems' repository to form part of
Genode mainline. The remaining CBE code becomes a port in Genode instead of
being invoked as sub-repository.
The commit combines the following work steps:
* add all files removed from CBE repository
* add CBE port files
* make all CBE libs and targets build again
* make all CBE run scripts succeed again
* make all CBE recipes build again
* make CBE autopilot succeed again
* let CBE autopilot use 'libsparcrypto' contrib dir and Genode build dir
instead of '.ci' dir in CBE contrib dir (remove '.ci' dir from CBE repo)
* let CBE autopilot always check for all ports
* make CBE autopilot directly executable
* fix license headers in all Genode CBE files
* remove unused VFS replay component
* remove unused CBE test
* remove unused external crypto
* remove unused files in run dir
* remove unused external trust anchor
* add cbe_tester test to autopilot list
* get rid of directories 'include/cbe_*' and 'include/utils'
Fixes#3937
The control area is constructed during session creation and the caller can
handle the Out_of_* exception by increasing the quota by the next attempt.
Fixes#3917
Log a warning when the lwIP VFS plugin queues a read while waiting
for an interface to become ready. By comparision the Lxip plugin
has the same behavior but a more verbose initialization process.
Fix#3920
Account for the situation where the driver is started while the HP
is already plugged in and configure the mixer accordingly.
Thanks to Peter for the patch.
Issue #3929.
Due to what seems like a copy-and-paste error, the wrong union member
was used to compare the label. Fortunately, as both structs have the
same memory layout that did not result in any issue.
Issue #3929.
Originally, the kernel code should have been executed within the
context of the main task like it is done in dde_linux. The initial
port of the HDA driver, however, did not required doing so and the
session called code directly.
When using USB device, that is no longer possible as we have to
suspend the execution during the execution of the kernel code. So
we pass in the audio data and schedule the kernel.
Fixes#3929.
This becomes necessary in case of the USB audio driver where we have
to wait for and query the function first.
That being said, alternatively we could also announce the session but
ignore any request until there is a device we can use.
Issue #3929.
With this commit the timer back-end uses the timeout framework to
schedule any occuring timeouts and for providing the current time.
For now there is only one timeout, the unsolicited azlia codec event
and therefore the timeout queue consists of solely one timeout object.
In addition a timer session is used for implementing 'delay()' where
we have to block until the delay is completed.
Issue #3929.
For historical reason the 'strlcpy' implemention was directly pull in
into the emulation environment. There is, however, no reason not to
use the contrib sources in the usual fashion.
Issue #3929.
Instead of the generic name, call the PCI driver 'pci_audio_drv'.
This is preliminary clean-up work before introducing the USB audio
driver.
Issue #3929.
The supported drivers so far exclusively used PCI and for practical
reasons the emulation environment was to tied to. To make future
addition of drivers that employ other transport busses easier, split
the bus handling into its own backend.
This is preliminary clean-up work before introducing the USB audio
driver.
Issue #3929.
* Updating the run script was missed in commit "dde_bsd: remove
configration attributes".
* Decrease output and input volume to "more sane" levels.
Issue #3929.
Updating the config and using its settings instead of only reporting
the new session allows to apply stored channel settings immediately.
In case of Sculpt this is useful when an existing launcher already
contains a valid config that sets the volume levels appropiately or
the 'recall_fs' is used.
Fixes#3930.
The _root, _gid and _uid private member variables are not used for
anything. GCC does not care, but clang likes to complain about things
like this.
Issue #3938
Right now the code marks specific instance of this function as noreturn.
It then tries to initialize it using a value that has the same type,
except for the noreturn part. GCC does not care, but clang complains this
technically assigns the value of entry from incompatible pointer type.
Fix this by defining Entry function as no return.
Issue #3938
The lambda function passed to Board::Vm_page_table_array does not
actually use "this" for anything. GCC does not warn about this, but
clang does. Remove the extra capture to make clang happy.
Issue #3938
GCC doesn't care, but clang complains if [[fallthrough]] is not followed
by a semicolon. Existing code is also not consitent in this regard. Lets
just fix it to make clang happy.
Issue #3938
When compiling this code, clang complains reference to 'Sandbox' is
ambiguous. It can either mean ::Sandbox namespace from
os/src/lib/sandbox/types.h, or Genode::Sandbox declared in
repos/os/include/os/sandbox.h. Since the code refers to ::Sandbox::Child
and its already in ::Sandbox namespace we can just drop "Sandbox" and
refer to just Child, which makes clang happy.
Issue #3938
This path fixes a void cast used to silence unused return value warning.
Its a common pattern to use void cast to do that. The code uses void *
cast instead. It works for GCC, but clang complains about this.
Issue #3938
Clang is rather picky about this and prints the following warning when
compiling new_delete.cc:
error: function previously declared with an explicit exception
specification redeclared with an implicit exception specification
[-Werror,-Wimplicit-exception-spec-mismatch]
Issue #3938
This was discovered when building the code with clang instead of GCC. In
this setup the run/ping on base-hw/arm_v8a/virt_qemu would crash
on shutdown due to uncaught Deref_unconstructed_object exception thrown
for Genode::Reconstructible<Genode::Account<Genode::Ram_quota>>. The
specific instance throwing this exception was
Pd_session_component::_ram_account. My investigation exposed the
following problem:
1. The Pd_session_component has a _sliced_heap member backed by
_constrained_ram_alloc which in turn uses Pd_session_component itself
as its Ram_allocator.
2. When ~Pd_session_component is called it first destroys _ram_account,
followed by _signal_broker.
3. The signal broker holds a reference to
Pd_session_component::_sliced_heap as Signal_broker::_md_alloc.
4. The base-hw implementation of ~Signal_broker destroys some contexts
and does this by calling Genode::destroy on some slabs using the
_md_alloc (ref to Pd_session_component::_sliced_heap).
5. The Genode::Slab calls the Ram_allocator::free which ends up calling
Pd_session_component::free.
6. The Pd_session_component::free can among other things call replenish
method on Pd_session_component::_ram_account which has already been
freed at this point.
From my POV calling replenish at this point is basically an undefined
behavior. The Genode::Constructible holding the Genode::Account was
already detroyed at this point. GCC builds happen to somehow manage to
go through the -> operator call without raising any alarms, while clang
builds trip on the _check_constructed() call.
This fix moves the _ram_account a bit higher in class declaration to
ensure its destroyed after _sliced_heap. This seems like the simpliest
solution for this problem.
Fixes#3941
This prevents later file-descriptor shortage when opening files on
demand, which can't be reflected to the application in a sane manner.
The real fix is to open socket files not on libc level but on VFS level
only effectively consume one libc file descriptor for one socket.
* Fix GIC model to support priority and cpu target settings correspondingly
* Fix semantic of SGIR register for GICv2
* Minor GIC model IRQ state fix
* Introduce synchronization for VirtIO and GIC models
* Enable multiple CPUs in test run-script for ARMv8
Fix#3926
* Introduce hypervisor-stack per CPU
* Introduce host world context per CPU
* Mark EL2 translation table memory as inner shareable
* The VMID is not bound to a single VCPU, but to the Vm_session as a whole
* Set affinity of the VCPU accordingly
* Add VMPIDR to VM state
Ref #3926
Instead of calling core to run/pause a VCPU, go directly to the kernel.
Apart from the performance win, it would otherwise involve a more complex
protocol, when a VCPU on another core has to be removed from the scheduler.
Core's entrypoint handling those request runs on the boot-cpu only.
Ref #3926
To enable the interaction of a VMM with the kernel directly,
a hidden RPC gets introduced. It allows a kernel-specific
base-library implementation of the Vm_session::Client to request
a kernel-specific capability to address a VCPU, e.g., to
run/stop it.
Ref #3926
Now, the USB connection is established on backend initialization and
terminated on backend exit triggered by high-level libusb code.
Thanks to Peter for the patch.
- unlink shared memory files
- lower maximum number of socket pool sockets to reduce chance of file
descriptor exhaustion
- fix a build dependency which caused sporadic parallel build errors
Fixes#3910
With this commit, the alignment of anonymous 'mmap()' allocations can be
configured like this:
<config>
<libc>
<mmap align_log2="21"/>
</libc>
</config>
Fixes#3907
This plugin gives access to the Audio_out session by roughly
implementing a OSS pseudo-device. It merely wrapps the session and does
not provide any resampling or re-coding.
Fixes#3891.
In the same vein as the terminal and block I/O controls, the sound
controls are implemented via poperty files and match the OSS
API ([1] features a nice overview while [2] is v3 and [3] gives
in-depth information on the current v4.x API we eventually might want
to implement).
[1] https://wiki.freebsd.org/RyanBeasley/ioctlref/
[2] http://www.opensound.com/pguide/oss.pdf
[3] http://manuals.opensound.com/developer/
The controls currently implemented are the ones used by the cmus OSS
output plugin, which was the driving factor behind the implementation.
It uses the obsolete (v3) API and does not check if the requested
parameter was actually set, which should be done according to the
official OSS documentation.
At the moment it is not possible to set or rather change any
parameters. In case the requested setting differs from the parameters
of the underlying Audio_out session - in contrast to the suggestion in
the OSS manual - we do not silently adjust the parameters returned
to the callee but outright fail the I/O control operation.
The following list contains all currently handled I/O controls.
* SNDCTL_DSP_CHANNELS sets the number of channels. We return the
available channels here and return ENOTSUP if it differs from
the requested number of channels.
* SNDCTL_DSP_GETOSPACE returns amount of playback data that can
be written without blocking. For now it amounts the space left
in the Audio_out packet-stream.
* SNDCTL_DSP_POST forces playback to start. We do nothing and return
success.
* SNDCTL_DSP_RESET is supposed to reset the device when it is
active before any parameters are changed. We do nothing and return
success.
* SNDCTL_DSP_SAMPLESIZE sets the sample size. We return the
sample size of the underlying Audio_out session and return ENOTSUP
if it differs from the requested number of channels.
* SNDCTL_DSP_SETFRAGMENT sets the buffer size hint. We ignore the
hint and return success.
* SNDCTL_DSP_SPEED sets the samplerate. For now, we always return
the rate of the underlying Audio_out session and return ENOTSUP
if it differs from the requested one.
This commit serves as a starting point for further implementing the
OSS API by exploring more users, e.g. as VirtualBox/Qt5/SDL2 audio
backend or a more sophisticated progam like sndiod.
Issue #3891.
At least on some PIT-based platforms (x86_32 + pistachio/okl4/sel4), we run
into trouble with the reworked timeout framework that now proccesses all
pending timeouts before calling their handlers. This order change leads to a
higher rate of handling of short periodic timeouts in the timer driver which
can cause lower prioritized components to starve. Especially, if submitting
signals (from timer to client) isn't cheap (as is the case on qemu + pistachio
for example).
Issue #3884
The driver is faily simple and does not support fancy features like
TCP checksum offloading or vlan filtering, but it is fully capable of
running every Genode network based scenario I've tried. Its currently
known to work on virt_qemu arm platforms and x86_64.
Fix#3825
To simplify writing native VirtIO drivers for Genode add helper classes
representing VirtIO device and queue. The queue implementation should
be platform independant. The device abstraction however is closely tied
to the VirtIO transport being used (PCI/MMIO). Both PCI and MMIO
implementations expose the same public API so the actual driver logic
should be the same regardless of which transport is used.
Its also important to note that the PCI version of Virtio::Device
currently does not support MSI-X interrupts. Unfortunately my kowledge
about PCI bus is very limited and my main area of interest was to get
VirtIO drivers working on virt_qemu ARM/Aarch64 platform. As such all
the VirtIO drivers I plan to submit will work with PCI bus, but might
not use some extended capabilities.
Ref #3825
The VirtIO device configuration on Qemu is dynamic. The
order and presence of different command line switches affects
base address and interrupt assignment of each device. One could
probably hard-code the necessary switches and resulting XML ARM
platform driver configuration in each run script, but this seems
like troublesome and hard to maintain solution.
This patch explores an alternative approach to the problem.
It implements a ROM driver which probes the address space region
Qemu virt machines assign to VirtIO MMIO devices and exposes the
result as XML via a ROM session. This XML output can be fed directly
as config to the generic ARM platform driver.
Ref #3825
Right now the same code dealing with nic setup on qemu is duplicated
in many different run scripts. It makes it unnecesarily complex to
change the existing config or add support for new nic types. Lets move
all this common code to qemu.inc.
Ref #3825
- make GPIO server more robust on imx by not throwing exceptions for
unknown pins, use '_with_gpio' instead
- use 'Gpio::Pin' data type instead of POD 'unsigned'
issue #3900
The patch handles the case, that the memory for the MSI-X table is part
of one of the Pci::Resource Memory BARs, which got allocated beforehand already.
With this commit, the platform driver will not fall back to use legacy IRQs or MSI, whereby MSI-X is available actually. Additionally, this patch avoids a lot of red
messages about non available IO-MEM printed by the roottask.
Fixes#3904
The deadlock occured with three concurrently running threads: two
waiters calling pthread_cond_timedwait() and one signaller calling
pthread_cond_signal().
If waiter W1 hits its timeout, the signaller may have called
pthread_cond_signal(), detected this waiter and posted the internal
'signal_sem' concurrently. Then, the signaller waits for 'handshake_sem'
to ensure the waiter got woken up.
Waiter W1 can't consume the 'signal_sem' post by
'sem_wait(&c->signal_sem)' because another waiter W2 may have consumed
the post already above in sem_wait/timedwait(). Waiting for a post on
'signal_sem' would block the waiter W1 in perfect deadlock with
signaller on 'handshake_sem'. As W1 also owns 'counter_mutex' in this
situation, waiter W2 would block when trying to aquire 'counter_mutex'
and can't resolve the situation.
So, W1 does nothing in this case and we accept the spurious wakeup on
next pthread_cond_wait/timedwait().
* get rid of alarm abstraction
* get rid of Timeout::Time type
* get rid of pointer arguments
* get rid of _discard_timeout indirection
* get rid of 65th bit in stored time values
* get rid of Timeout_scheduler interface
* get rid of uninitialized deadlines
* get rid of default arguments
* get rid of Timeout::_periodic
* get rid of Timeout::Raw
* use list abstraction
* only one interface for timeout handlers
* rework locking scheme to be smp safe
* move all method definitions to CC file
* name mutexes more accurate
* fix when & how to set time-source timeout
* fix deadlocks
Fixes#3884
In case of contexts blocked in select() the monitor updates the
file-descriptor status, but if the entrypoint is just blocked for the
select handler, the status must be updated explicitly on
dispatch_select().
This patch fixes the corner case where the keyboard focus is defined
independently from user interactivity, e.g., the activation of a
screensaver or lock screen.
In this case, nitpicker would update its internal focus state not before
the next input event is handled. Should this input event be a press
event, this event would wrongly be delivered to the prior focused
session. Another problematic situation is the initial state before the
very first input event occurs. Since the focus remains undefined until
the first input event is handled, an initial key press event would not
be delivered.
This is a regression caused be the transition to the event-session
interface and the removal of the nitpicker's periodic way of operation.
The patch fixes the problem by applying pending focus changes not only
at the input processing but also on the code path that responds to focus
changes (e.g., focus-rom update).
Issue #3812
Adjust the base-* platforms to acknowledge new thread location solely if
migration is supported and succeeded. Otherwise the wrong thread
locations are observed via the trace session and utilization time calculation
get wrong.
Issue #3842
Instead of using the old 'ioctl' Vfs::File_io_services API implement
the I/O control functionality in a buch of files. This is similar to
the terminal-VFS plugin.
Fixes#3889.
Like already done for terminal I/O controls use collect the information
by reading property files instead of using the old VFS ioctl interface.
Fixes#3888.
There is a type mismatch as in the FreeBSD contrib code the type of the
request is 'unsigned long'. So far, only I/O controls where the request
falls into the signed range where used and this was not a problem.
Some of the SNDCTL requests, however, have the bit set.
Fixes#3887.
This patch is a follow-up for the commit "libc: use monitor for fork".
It removes the use of the monitor mechanism from the
'Local_clone_service::close' RPC function because the fork_ep must stay
responsive for the destruction and creation of 'Child' objects.
Issue #3874
The current version of the driver leaves the screen in a black state
after a mode change, e.g., when connecting an external display.
With this patch, the framebuffer content is fetched for the entire
screen after a mode change. Thanks to Sebastian Sumpf for investigating.
Issue #3878
- Show "..." for resource-assignment menu entry because it leads
to a sub menu.
- Avoid dialog changes when clicking on "Add component" while a
routing or resource dialog is unfolded.
The initial implementation of the affinity configuration in
"depot_deploy: support affinity configuration" added the affinity
location attributes to the <start> node of the deploy config. This patch
moves the information into a dedicated <affinity> sub node as done by
the init configuration. So the context of the attributes 'xpos', 'ypos',
'width' and 'height' becomes clear.
It also fixes a usability issue in Sculpt that occurred during testing:
When configuring multiple components with custom affinities, the
resources dialog of later components would wrongly display the state of
earlier components instead of displaying the fresh (default) state. The
resulting configuration would then not match the displayed information.
This is fixed by resetting the dialog state.
As another minor cosmetic change, the patch adds a line break in front
of copied <config> or <heartbeat> nodes.
Issue #3597
The combination of Net::Mac_address and
Genode::ascii_to(Net::Mac_address) required shaky quirks in several
places because GCC is not able to resolve the ascii_to overload if
base/xml_node.h was included to early. The current solution moves the
several ascii_to overloads "closer" to the Net types by putting them
into the Net namespace, where GCC reliably picks them up.
Hence, co-locating the ascii_to() utility with the overload type in the
same scope/namespace is good practice.
This patch removes the now obsolete <nic/xml_node.h> header file.
With the move of the storage-management dialogs to the graph in Sculpt
version 20.02, the ability to unselect the buttons for destructive
storage operations such as format or expand disappeared. This patch
restores the original behavior.
* On this platform there is no need to zero out the framebuffer
dataspace, which is already blanked by core
* But it might happen that the GUI server is sending a capture
event before the zero out happens. Thereby screen content can get
lost
Fix#3878
* Fixes faulty algorithm in fractional pll rate calculation
* Enables clocks that are set as reference clock to prevent system freeze
* Enables/disables root clocks of gates implicitely
Fix#3876
By default, bash brings its own version of 'getenv', named exactly like
the libc function. This becomes a problem in fork/execve scenarios if
the dynamic linker resolves 'getenv' to the bash binary instead of the
libc.
This patch fixes the generate step of the genodians.org scenario.
Issue #3882
This patch enables the menu view's new ability to respond to font-size
changes in Sculpt so that the menu view instanced no longer need to be
restarted whenever the screen resolution or font size is changed.
Fixes#3875
This patch allows the use of the VFS watch mechanism for the glyph file
of the TTF VFS plugin so that clients become able to dynamically respond
to font reconfigurations.
Issue #3875
This is needed to enable VFS plugins to notify VFS clients about file
changes that depend on the plugin configuration, E.g., whenever the vfs_ttf
plugin responds to a font-size change, it generates a watch notification
for the glyphs file. Since the change is independent from I/O, we need
to manually call 'handle_io_progress'.
By default, Vim renames a written file to a backup file suffixed with
"~" before writing the current buffer to a new file. Consequently, there
exists an intermediate state when no file exists. Should a client watch
such a file to obtain dynamic configuration info, it observes the empty
state.
Some components have builtin heuristics for such a situation. In
particular, the window layouter falls back to a predefined default
'rules' if no rules are provided as a file. So when interactively
editing window-layouter rules using Vim, it can happen that the manually
maintained rules get overwritten by the default rules.
By setting 'set nowritebackup', we can sidestep this issue by preventing
Vim from producing the bad intermediate state.
With the change of nitpicker to the event session interface, the
formerly periodic hovering updates moved to the - now sporadic - input
processing. This has the unfortunate side effect that hovering changes
caused by non-user-input, in particular view-stack changes issued by the
GUI clients that change the view under the current pointer position,
would no longer be reported immediately but only after receiving the
next incoming input event.
This patch reworks the hover handling such that potential hovering
changes due to view-stack operations are evaluated immediately by
those operations, covering the update of the hover report and the
generation of artificial enter/motion events.
Issue #3812
This patch solves a corner case where one long-active job (e.g.,
read-ready request) stays at the beginning of the '_active_jobs' queue
without an ack. In this case, the '_try_acknowledge_jobs' method would
wrongly stop processing the subsequent acknowledgements. In practice,
this can lead to a delayed sending of acknowledgements until new I/O or
client requests occur. In particular, Vim in Sculpt's inspect window
sometimes did not immediately respond to key presses during tab
completion. Here, the read-ready request of the terminal prevented the
acknowledgement for read of directory entry from being delivered until
the next key was pressed.
Fixes#3873
The quota for the argument buffer is already accounted by using the
Attached_ram_dataspace _argument_buffer, which uses the Constraint_ram_allocator
_ram, which uses the Ram_quota_guard from the Session_object. Running on
Sculpt with more than 1000 Subject_info objects/trace IDs the memory
waste become noticeable.
Follow-up commit to fix the old usb_drv. Under rpi one and the
same irq can be requested several times. Therefore, we've to track
the Irq_connection objects.
Ref #3865
The Lx_kit::Irq abstraction of DDE Linux was always using the very first
interrupt of a Platform::Device stored in it. Instead of handing over the
platform device it is much more flexible and sane to hand over the actual
interrupt capability.
Ref #3865
By now, the enumeration of peripheral interrupts on Raspberry Pi 1 was
different in between base-hw kernel and Fiasco.OC. Therefore, hacks were
needed in every driver to request the correct interrupt number dependent
on the kernel. Before reproducing the same in the platform driver for rpi,
we can more easily use the same enumeration with base-hw.
Ref #3864
This is a temporary workaround to not harm drivers, which aren't
converted yet to request all device resources including power and
clocks from this new platform driver.
Ref #3863
To access the ARM Trusted Firmware from the platform driver
fill the new `managing_system` call of the PD session with life resp.
do a SMC call on behalf of the client.
Fix#3816
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
Normally CLOCK_REALTIME is used. However libraries, like glib, want to
use CLOCK_MONOTONIC. To make those users happy add setting the clock.
Note, the pthread_cond implementation uses the POSIX semaphore API
internally that does not have means to set the clock. For this reason,
the private 'sem_set_clock' function is introduced.
Fixes#3846.
When the 'raw' attribute is set to 'yes' the terminal VFS plugin will
ignore control characters. This in necessary for terminal connections
that transport data that contain such characters as part of message.
Fixes#3860.
The driver wrongly rejected a block request for the very last block of
the device, which prevented part_block from successfully parsing the
partition table (when attempting to access the GPT backup).
Fixes#3861
With this patch, sculpt uses init's heartbeat-monitoring mechanism to
detect the failure of part_block instances during storage disovery.
If part_block gets stuck, the device is released and can thereby
be accessed at the whole-device level.
Issue #3861
The patches disable VBOX_IGNORE_FLUSH and a sanity check in the VMDK
backend. This enables passing an explicit flush request by the guest
down to the VFS.
Fixes#3743.
The check prevents the Ttf_font from violating the bounding box in the
presence of very small scale values. This can happen during the startup
of Sculpt. Before the framebuffer driver is up, Sculpt bases its dynamic
font-size setting on a screen resolution of 1x1.
Issue #3812
* add libsparkcrypto source-recipe
* provide ALI files through a new repository by mstein and add the repo
download to the libsparcrypto port-file
* remove dependencies to non-existent contrib ADB files from the library make
files
Fixes: #3852
The sculpt manager used to defer the initialization of the GUI until
nitpicker's first display report became ready. This way, Sculpt was able
to run headlessly even if the framebuffer driver failed to start up.
Thanks to #3827, nitpicker no longer depends on a working framebuffer
driver. So the sculpt manager is safe to rely on nitpicker in any case,
simplifying the code.
Issue #3827
This is a follow-up commit to "nitpicker: make framebuffer and input
optional". It restores the dynamic mode-change support when using
'request_framebuffer="yes"' as needed in scenarios where multiple
nitpicker instances are used in a cascaded way. E.g., Sculpt's
Leitzentrale. The previous version missed to reconstruct the
'_fb_screen' on mode changes.
Issue #3812
This patch untangles the dependency of VFS operations that need RTC
information from the 'clock_gettime' libc function that must never be
called from the libc kernel context.
- The 'Rtc' class uses the VFS directly for reading the rtc file instead
of relying on libc functions.
- The 'Rtc' instance has become part of the 'Kernel' instead of
being construced as a side effect of the first call of
'clock_gettime'.
- Changed 'Rtc::read' to return a timespec value, which has a higher
precision than the formerly used time_t value.
- The 'Rtc::read' returns a value with the relative 'current_time'
already applied. The former handling of subsequent rtc-value
updates has been rewritten to become more logical.
- The 'Vfs_plugin' no longer calls 'clock_gettime' but the new
kernel-level 'Current_real_time' interface.
Issue #2635
This patch untangles the interplay of the base library and the libc
during the exit handling.
- The CXA ABI for the atexit handling is now provided by the libc.
For plain Genode components without libc dependency, __cxa_atexit
is a no-op, which is consistent with Genode's notion of components.
- The 'abort' implementation of the base library no longer calls
'genode_exit' but merely 'sleep_forever'. This way, the cxx library
no longer depends on a 'genode_exit' implementation.
- The libc provides 'atexit' support by storing metadata on the
libc kernel's heap now, thereby eliminating the former bounded
maximum number of atexit handlers.
- Shared-library dtors are no longer called via the atexit mechanism
by explicitly by the dynamic linker. This slightly changes the
call order of destructors (adjustment of the ldso test). Functions
marked as destructors are called after the atexit handlers now.
- The libc executes atexit handlers in the application context,
which supports the I/O operations in those handles, in particular
the closing of file descriptors.
Fixes#3851
For the time being, we put all spec and body files into the recipe although
there might be a (so far to us unknown) way to have only the API relevant files
in it.
Fixes#3849
* switch to a libsparkcrypto fork of m-stein
* switch to a libsparkcrypto state that makes some units pure that are used by
the consistent block encrypter, in order that the latter can become
completely pure
Ref #3849
* switch to fork of the Ada runtime provided by m-stein
* switch to a Ada-runtime state that provides the Exp_Int package (exponential
function on integers)
* adapt spark lib, symbols, and recipes to incorporate the Exp_Int package
Fixes#3848
* enable all common warnings through default value of CC_ADA_WARN
* treat warnings like errors through default value of CC_ADA_WARN_STRICT
* enable almost all style checks through default value of CC_ADA_WARN_STRICT
* style fixes for aes_cbc_4k
* disable strict warnings and style checks for libsparkcrypto and spark lib
Ref #3848
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This remove the call to Io_progress_handler::handle_io_progress() from
wait_and_dispatch_one_io_signal() to prevent unexpected nesting
I/O-progress handling in case of custom dispatch loops (e.g., in libc).
The original intention of Io_progress_handler was to inform the
entrypoint just before blocking in the entrypoint loop.
Issue #2635
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch brings the input filter into a shape that is easier to
re-mold into an event filter, reversing the client/server roles of
the component.
* The 'Sink &destination' is no longer passed as constructor argument
to the individual filters but passed as argument to the 'generate'
method. This way, the final destination does not need to exist at
the construction time of the filter chain but can be created on
the fly (clearing the way for using 'Event::Client::with_batch').
* A new 'Source::Filter' interface with the 'apply' method aids the
cascading of filters during 'generate'. The modules now implement
the 'Source::Filter::filter_event' interface instead of the
'Source::Sink::submit_event' interface.
* Since the 'Sink &destination' is no longer a member of the filter
modules, character-repeat events can no longer be emitted in an
ad-hoc way. Instead, the character-repeat mechanism now invokes
a new 'Trigger::trigger_generate' hook that prompts the execution
of the regular 'generate' mechanism by the main program.
This patch is supposed to leave the semantics of the input filter
unchanged (validated by the input_filter.run script).
Issue #3827
This is an intermediate helper component for the transition of input
servers into event clients. It works analogously to the
input_event_bridge but it connects servers instead of clients.
In particular, it can act as glue between a traditional input driver
that provides an input service and the event filter that provides an
event service. Thanks to this component, each driver can be migrated to
the event-client interface individually.
Issue #3827
- base/cancelable_lock.h becomes base/lock.h
- all members become private within base/lock.h
- solely Mutex and Blockade are friends to use base/lock.h
Fixes#3819
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
This patch replaces meta-data allocation during the resize handling by a
new 'Resizeable_texture' type that has all meta data preallocated.
It also replaces the use of pointer return values with the
'Resizeable_texture::with_texture' method.
Issue #3812
Nitpicker used to unconditionally request a framebuffer and input
session. With the transition to the new capture/event session
interfaces, this built-in policy does no longer suffice.
This patch introduces the attributes 'request_framebuffer="yes"' and
'request_input="yes"' (with the default values shown) to nitpicker's
<config> node. If setting those attributes to "no", nitpicker won't
request a "Framebuffer" and "Input" session respectively.
Issue #3812
In the presence of potentially multiple output back ends, this
dirty_rect state must be maintained individually per back end. Instead
of storing the dirty_rect as view-stack member, the view stack now calls
a new 'Damage::mark_as_damaged' interface, which allows nitpicker to
propagate this information to multiple back ends. Unfortunately, the
patch must remove the per-view dirty_rect state.
Issue #3812
This patch simplifies the internal naming of the nitpicker GUI server as
a preparatory step for adding support for the capture session interface.
Issue #3812
