Information about PS/2 and PIT where moved to app/pci_decode in the
following commit.
pci_decode: report devices from ACPI info
We still provide an empty <devices> node as the file itself is used by
platform agnostic run scripts.
When running on x86, and riscv never enter the kernel for cache maintainance,
but use the dummy implementation of the generic base library instead.
On ARMv8 it is not necessary to enter privileged mode for cache cleaning, and
unification of instruction/data cache, but only for invalidating cache lines
at all levels, which is necessary for the use cases, where this function it
needed (coherency of DMA memory).
Fixgenodelabs/genode#4339
This call is used to query the cache line size of the underlying CPU.
For now it is only implemented and used by 'arm_v8' platforms.
It does not distinguish between D-/I-cache sizes and always uses the
smallest size. Furthermore it does not account for any discrepancy
in 'big.little' CPUs.
Issue #4339.
To prevent the kernel to deadlock, or call itself with a syscall when
using a lock potentially hold by a core thread, the log console's
backend for core (hw) gets replaced by a specific variant that checks
whether it runs in the kernel context before using the mutex.
Fixgenodelabs/genode#3280
When a domain receives a new dynamic router IP address and that domain has
active connection states (TCP/UDP/ICMP) from another domain with NAT applied,
the connection states used to stay active while becoming obsolete. They
become obsolete because their identification and their packet processor
use the old routers IP address due to NAT.
One consequence was that connections became dysfunctional when the server
domain received a new dynamic router IP address. Request packets were still
routed from client to server, but when entering the server, their source IP
address was the outdated router address. Consequently, the server responses
used the outdated address as destination and the router dropped the responses
because it did not know this address anymore.
This commit fixes the problem by letting a domain destroy all its connection
states that were initiated from within other domains whenever it detaches from
its current IP configuration.
Strictly speaking, it is not necessary to destroy all connection states, only
those that the domain applies NAT to. However, the Genode AVL tree is not built
for removing a selection of nodes and trying to do it anyways is complicated.
So, for now, we simply destroy all connection states.
Note that the other way around was handled correctly already. When a domain
detaches from its IP config, all interfaces of that domain destroy all the
connection states they created (towards other domains).
Fixes#4696
If the IP config does not change on updates to the router IP config of a domain
change (a common case on DHCP RENEW), prevent detaching from the old config and
attaching to the new one. Because this would not only create unnecessary CPU
overhead but also force all clients at all interfaces that are listening to
this config (via config attribute 'dns_config_from') to restart their
networking (re-do DHCP).
Ref #4696
Check 'pv == nullptr' in 'ShClSvcImplWriteData' and return
VERR_INVALID_POINTER if invalid (as is done, for example, in the X11
implementation).
issue #4666
By adding a 'write_ready' interface following the lines of the existing
'read_ready', VFS plugins become able to propagate the (de-)saturation
of I/O buffers to the VFS user. This information is important when using
a non-blocking file descriptor for writing into a TCP socket. Once the
application observes EAGAIN, it expects a subsequent 'select' call to
return as soon as new I/O buffer space becomes available.
Before this patch, the select call would always return under this
condition, causing an unnecessarily busy write loop.
Issue #4697
The new interface is meant to replace the 'Vfs::Io_response_handler'.
In contrast to the 'Io_response_handler', which had to be called
on a 'Vfs_handle', the new interface does not require any specific
'Vfs_handle'. It is merely meant to prompt the VFS user (like the libc)
to re-attempt stalled I/O operations but it does not provide any
immediate hint, about which of the handles have become ready for
reading/writing.
Issue #4697
This patch removes the 'Insufficient_buffer' exception by returning the
WRITE_ERR_WOULD_BLOCK result value instead. It also eliminates the
superfluous WRITE_ERR_AGAIN and WRITE_ERR_INTERRUPT codes.
Issue #4697
The original size of 16K impedes the batched processing of network
packets. Changing the value to 256K reduces the number of context
switches when downloading large files and thereby improves the
throughput by more than 25% (base-hw on qemu_x86_64, using fetchurl
to download a file of 100 MiB via the NIC router from lighttpd).
Issue #4697
This patch fosters the batching of network packets transferred by the
lwIP stack over the NIC connection. It replaces the eager submission of
the packet-stream's data-flow signals by explicit wakeup notifications.
The commit also increases the NIC session's buffer size from 128 to 1024
packets.
Issue #4697
...and tighten constness in adjacent code parts.
The VFS-internal synchronization via mutexes is no longer needed because
the access to the VFS is serialized by the VFS client, i.e., the libc.
Issue #4697
Since the lwip library is used only by the vfs_lwip plugin, this patch
moves the Genode-specific support code local to the VFS plugin, easing
further simplification and allowing for a tighter integration with the
VFS plugin.
The recipes for api/lwip and src/vfs_lwip stay separate as both parts
use different licenses.
Issue #4697
This networking scenario is useful for analysing and optimizing the
interplay of the VFS, libc, TCP/IP, and the NIC router. It downloads a
file via fetchurl from lighttpd, both of which are hosted on a virtual
network.
Issue #4697
This patch facilitates the batching of I/O operations in the VFS library
by replacing the implicit wakeup of remote peer (via the traditional
packet-stream interface like 'submit_packet') by explicit wakeup
signalling.
The wakeup signalling is triggered not before the VFS user settles down.
E.g., for libc-based applications, this is the case if the libc goes
idle, waiting for external I/O.
In the case of a busy writer to a non-blocking file descriptor or socket
(e.g., lighttpd), the remote peers are woken up once a write operation
yields an out-count of 0.
The deferring of wakeup signals is accommodated by the new 'Remote_io'
mechanism (vfs/remote_io.h) that is designated to be used by all VFS
plugins that interact with asynchronous Genode services for I/O.
Issue #4697
This test reveals the patters of the batching of consecutive write
operations on a file-system session. It issues 100 writes of one byte
each, which should ideally result in large batches of operations
submitted to the file-system session at once.
The run script performs the write operations through a chain of two VFS
servers, thereby exercising the write batching of both the libc and the
intermediate VFS server.
Issue #4697
By replacing the calls of 'acknowledge_packet' and 'get_packet' with
'try_ack_packet' and 'try_get_packet', we avoid the implicit triggering
of data-flow signals. Instead, the VFS server now relies on explicit
calls of the packet stream's 'wakeup' interface.
Issue #4697
The change of the queue size from 16 to 32 has negligible costs (4 KiB
instead of 2 KiB for the packet-stream queues) while facilitating the
batching of many small consecutive write operations.
Issue #4697
Some signal-heavy scenarios (e.g., libc_integration) produced the
following warning that hinted a data race on signal data in the context
object.
Warning: returning signal with num == 0
The cause was the use of Signal_context::local_submit() in the libc
introduced in
424ed1b79a libc: remove Reconstructible / use local_submit in kernel
in combination with a missing context-mutex aquisition resulting in a
data race on Signal_context::_curr_signal.
Issue #3923
The commit "sculpt_manager: relax nic_drv policy label" introduced the use of
the "label_prefix" attribute instead of "label" for the uplink policy in the
NIC router. However, it missed an appropriate adaption of the lookup of that
attribute when the Sculpt manager has to decide which uplink is used in a
manually managed router config. This caused the uplink to disappear whenever a
user created a manually managed router config. This commit fixes the problem.
Issue #4660Fixes#4695
This prevents errors like the following during parallel builds.
MERGE ld-hw.abi.so
/usr/local/genode/tool/21.05/bin/genode-arm-ld:symbol.map:0: syntax error in VERSION script
Replace usb_kill_urb() by usb_unlink_urb() in the timeout handler for
control URBs, as usb_kill_urb() may block and is not allowed to be
called in IRQ/bottom half contexts.
Fixes#4681
Count more accurately how much packets are in flied, and whether
new packets can be handled. Moreover, catch potential exceptions
whenever acknowledging a packet, and warn about the lost acknowledgement.
Fixgenodelabs/genode#4678
There is at least one client that performs DRM calls from multiple
pthreads, which is not supported for now. We guard the concurrent
access by grabbing a pthread_mutex before each operation.
This commit circumvents faulty behaviour of base-pistachio, if
the PCI config space gets requested megabyte-wise. It occurs that
we get a mapping sequence in between sigma0, core and component,
like the following: 0xe1000000 => 0xbf001000 => 0x10b000,
with the consequence that the component stalls when accessing
the latter one. By requesting I/O memory aligned to the size,
the faulty behaviour vanishes.
Ref #4686
This is required for scenarios in which a device appears at a later
point in time. If the ROM is not updated, the device_by_type() method may
operate on an outdated dataspace and never find the device it is waiting for.
Although we do not have the full ACPI information parsed yet, to
announce non-PCI devices derived from the ACPI tables, the device
description of the assumed devices is now integral-part of pci_decode.
Formerly, the information was gained separatedly as boot-module, whereby
we lost synchronization in between ACPI/PCI parsing, BIOS handover, and
PS/2 emulation code already acting.
This recipe combines the dummy_rtc_drv, which consumes a given time,
and provides the "Rtc" service to its clients with the simple NTP client,
which provides the current time to the RTC driver in regular intervals.
Ref genodelabs/genode#4687
Test to trigger periodically ACPI suspend and resume and periodically
trying to restart graphic driver.
Tested successfully with X201 and T420.
Issue #4669
It looks like http://www.elm-chan.org is blocking certain IP ranges,
because downloading the source archive on certain machines fails with
"403 Forbidden".
Fixesgenodelabs/genode#4623
During interrupt handling the driver masked and cleared interrupts as
recommended in the spec to prevent spurious or unnecessary interrupts
from occurring.
Due to the way the current implementation operates new Block requests
got submitted while handling completions for already finished ones.
Since interrupts where masked at this point the controller did not
generate interrupts when the newly submitted requests got completed.
As the mask/clear optimization is apparently not strictly needed and
according to the spec undefined when using MSI-X it is removed.
Fixes#4684
200 TSC ticks for max measurement duration can get too small on platforms
with high TSC frequencies (e.g., >3GHz) and low CPU frequencies often
caused by HWP configurations. Therefore, we express the measurement
duration in NS (not ticks) and calculate max duration ticks using the
TSC frequency. This way the max duration becomes independent of the TSC
frequency.
fixes#4672
This commit enables users of the VMM to define CPU type and count, RAM size,
kernel and initrd ROM names, GIC version, and Virtio devices to be used.
Derived from the configuration values a flattened device-tree blob (DTB) is
generated and transfered to the VM.
Fixgenodelabs/genode#4670
Lack of MSI-X support in DDE Linux causes a timeout when the Intel AX211
tries to call back into the driver while loading the PNVM file while
interrupts are still disabled.
With the patch picked up from QubesOS the card works on an X1 Nano G2:
5fcfe0f19e
Issue #4663
Until now, requesting optional blobs such as 'iwl-debug-yoyo.bin' has
just failed silently. To support desired blobs such as PNVM firmware,
implement the loading of optional firmware while preserving the nowarn
characteristics of the function.
Issue #4663
Try to allocate within constraint area first. In case the area is exhausted,
try allocation at other memory locations.
The motivation for this is to limit DMA allocations to 4GB (since some
devices require addresses below 4GB). On some platforms there is little
physical RAM in this area (<1GB) and the constrainted area exhausts. In
case an IOMMU is present, RAM at higher locations can still be mapped
below 4GB, which is done in the platform drivers.
issue #4665
Consume '<iommu/>' tag from 'devices' report. In case an IOMMU is
present map physical memory to arbitrary locations within IO page table
range 1K-4G. This way every device PD has access to ~4GB of DMA space.
issue #4665
The platform driver configuration is missing the required 'info'
attribute that allows the 'vesa_fb_drv' to map the proper I/O
memory address of the framebuffer. In addition the driver requires
at least '2' more CAPs, so raise the quota to '110'.
Fixes#4668.
There is one binder with one memory zone per OpenGL context. The patch was
needed before because Genode didn't have proper context support (separate page
tables) leading to binders from one or more context being allocated to the same
GPU address with the same page tables. This was clearly an error and is fixed
with context support.
issue #4664
'_env_ram' allocations can lead to
'Expanding_pd_session_client::try_alloc' quota upgrades, which in turn
may lead to a resource request by the platform driver. Therefore, we
check the available quota within the platform driver before allocations.
This is not an optimal solution.
issue #4667
related issue #3767
This patch makes the component graph better reusable for the phone
version of Sculpt. In the phone version, the '+' menu does not exist.
So we need to omit the corresponding button. Furthermore, the storage
dialog is presented in a dedicate section of the GUI instead of
presenting it inside the 'storage' graph node. The phone version
also does not offer the inspect view. So we need to omit the
corresponding buttons.
To prevent caching side-effects of USB DMA memory taken from the packet stream
all allocations of USB packets need to be on separated cachelines at least.
Fixgenodelabs/genode#4655
To complement the GPIO support allow for setting and reading input
pins. So far this is needed by drivers that attempt to perform I2C
bit-banging via GPIO pins.
Fixes#4624.
In case the allocation fails for the largest possible connector mode,
try smaller modes. Additional add option to specify maximal resolution.
Issue #4659
Increase "assumed" internal kernel memory size based on available memory
to support allocation of framebuffer larger than 16M, which was before
hardcoded.
Issue #4659
When using the newer genode_c_api uplink library, an uplink connection uses
the device name as label, which enables integrators to use different policies
resp. routes for different devices driven by one driver. The nic_drv policy
of the nic_roouter configuration generated by the sculpt_manager however uses
an empty label like: "nic_drv -> ". This is the way how existent NIC drivers,
like ipxe_nic_drv requested their uplink session. To support both driver
variants this commit relaxes the policy by checking for a prefix only.
Ref genodelabs/genode#4660
This patch equips the pin-driver framework with support for the
time-multiplexed operation of a pin as output or input. This is needed
when implementing I2C communication via a bit-banging driver.
To operate pin in both directions, a driver obtains both a pin-state and
a pin-control session for the same pin. The pin-state session can be
used to sense the current pin state. The control session allows the
client to set the pin to high or low (using the 'state' method), or to
set it to high-impedance via the 'yield' method. Once switched to
high-impedance, the pin can be used as input.
Issue genodelabs/genode-allwinner#10
The tar.gz archive of version 2.4.9 vanished from sourceforge. As the
project moves to GitHub currently and the archive of 2.4.9 is still
available there, just update the download location.
Content and hashes did not change.
If a device should not be reset, powered off, and its clocks
shall stay untouched when it gets released, the leave_operational
attribute can be set to true in the device node of the related
device inside the devices ROM delivered to the platform driver.
This is useful for drivers, which only enable and initialize
their device, and can be closed afterwards.
Ref genodelabs/genode#4654
To enable other irqchip declarations beyond the lx_emul generic code base,
make the ARM specific initialization routine public.
Ref genodelabs/genode#4651
With "grub2: update to newer grub2 2.06 version" a regression slipped in
which makes the ISO not bootable on real hardware. The commit reverts to
the previous behaviour, to load the GRUB2 modules after boot later one by
one in the ISO format case.
Fixes#4647
Prevents errors like follows.
/bin/bash: arch/arm64/crypto/poly1305-core.S: No such file or directory
make[4]: *** [.../genode/repos/dde_linux/lib/mk/spec/arm_64/wireguard_lx_inc_dirs.mk:17: arch/arm64/crypto/poly1305-core.S] Error 1
Reintroduce:
USB Attached SCSI devices might expose a bulk-only interface
as fall-back at interface 0 and alternate setting 0. This commit
allows for probing all alternate settings of the active interface
to be able to use such devices.
The configuration was extended so that in case the device interface
is known beforehand the driver can be configured accordingly.
Additionally:
Perform configuration reset upon sessions close in order to bring USB
device to a well defined state.
fixes#4494
The NOVA kernel and Genode's roottask core are configured to be runnable
with up to 64 CPUs (MAX_SUPPORTED_CPUS in core resp. NUM_CPU in kernel).
On machines with more CPUs a reset occurred. The commit checks for this
case, bootstraps the first 64 CPUs only, and sends all other CPUs to
sleep.
Also, the platform_info ROM size is increased to host information about
more than 32 CPUs.
Issue #4640
If `select_from_ports` is evaluated lazily, we might miss a port during
the dependency check. A way to prevent this is to use the `:=` operator.
Fixesgenodelabs/genode#4618
Implement the guest code in dedicated assembler source file, assemble
and link the binary to vmm_x86. The resulting guest-code binary
populates one page that is mapped to host the reset vector of the guest.
This approach simplifies future guest code adaption resp. extension,
e.g., to test rdmsr/wrmsr exiting.
Fixes#4638
plain_decorator_theme.tar is not linked to the app but must be generated
as side effect. Therefore, use CUSTOM_TARGET_DEPS to trigger the
generation.
Fixes#4637
This reverts commit 9a37ccfe29 except for the
new declarations in public headers (in order to not change any APIs again).
We revert the commit as we found that there are corner cases in which it
produces a bad UDP checksum. The bad UDP checksum was observed via Wireshark at
a TFTP server in a Sculpt 22.10 Debian 11 VM on the first request of fetching a
file with the TFTP client of the uboot on our iMX8 test board.
Ref #4636
According to OpenBSD's azalia driver some AMD HDAudio devices do not
play nice with MSIs although the capability is set. At least the
0x1457 device was tested and worked using GSIs only.
genodelabs/genode#4578
During initialization _handle_link_state may be called concurrently from EMT and
"nic_ep" (signal handler). Therefore, sent signal to "nic_ep" instead of calling
_handle_link_state from EMT thread.
issue #4632
Some DHCP clients (Debian VM in Sculpt) persistently store the last lease they
obtained and try to directly DHCP REQUEST it on a new startup whithout doing
DHCP DISCOVER beforehand. In case the NIC router doesn't know about the lease
anymore (timeout, new router instance), the router used to just ignore the DHCP
REQUEST. This led to significant delays in the network startup of the client
(delayed retries until give-up and DHCP DISCOVER). With this commit, the router
answers such packets with a DHCP NAK instead, causing the client to directly
switch to DHCP DISCOVER.
Fixes#4634
This patch removes the intermediate querying of the depot while the
installation of packages is in progress. This avoids misleading warning
messages and reduces superfluous file-system load during the
installation of large packages.
Issue #4631
On-demand initialization prevents read-write operations on BARs of
invalid devices at construction time, which may result in surprising
behavior later on, for example, when resetting X260 notebooks via ACPI
information.
These utilities simplify the control of clocks, resets, and power
domains from within the platform driver.
This is needed when driving a low-level device directly from the
platform driver, for example for driving the mbox mechanism to access
the system-control processor of the PinePhone.
This patch reflects both the pci_decode results and the platform
driver's aggregated device information in Sculpt's /report/drivers/ in
the form of pci_devices and devices files respectively.
The configured 'st_blksize' influences the sizing of the FILE buffer,
see '__swhatbuf()'. Increasing the blksize hint can lead to larger
'fread()' requests and in return to fewer roundtrips.
This commit updates the driver from version 6.6 to 7.1. In contrast
to the old driver the new one will now probe all available HDA devices
and will drive the first usable one, e.g.:
```
[init -> audio_drv] azalia0 [8086:160c]
[init -> audio_drv] :
[init -> audio_drv] azalia0: no supported codecs
[init -> audio_drv] azalia1 [8086:9ca0]
[init -> audio_drv] :
[init -> audio_drv] azalia1: codecs: Realtek ALC292
[init -> audio_drv] audio0 at azalia1
```
Fixes#4629.
Implemented as depicted in the OpenBSD driver, register description
found in 'AMD SB700/710/750 Register Reference Guide'
(43009_sb7xx_rrg_pub_1.00.pdf).
Issue #4629.
Instead of using a global value to enumerate the MSIs, use a function argument
instead. Whenever the process of PCI device reporting gets started again,
due to an initially too small report buffer, the MSI enumeration value is reset
again. Formerly, we wasted MSI numbers.
Ref genodelabs/genode#4628
Don't skip IRQ reporting if legacy IRQ/GSIs are not supported as the
device may support MSI/MSI-X exclusively.
The commit also enables reserved_memory reporting of devices without
IRQs.
Ref genodelabs/genode#4578
Until now, the /config/system ROM was not handled by the sculpt manager
but solely managed by the user. Its main purpose was the ability to
reset or power-down the machine by manually modifying the 'state'
attribute. However, down the road, we'd like to enable the sculpt
manager to drive this state, e.g., to implement the multi-staged
loading of drivers, or to drive suspend-resume states.
The support such scenarios, the 'system' state has been moved from
/config/system to /config/managed/system.
* Add EHCI PCI quirk
* Add UHCI reset to UHCI quirk
* Apply all PCI quirks in order of the PCI bus numbering
otherwise the machine might stall
Ref genodelabs/genode#4578
Instead of allowing the client to set a caching attribute
in the io_mem() call of the device interface, which was
only used to decide in between of the memory being
write-combined or not, remove it from the API.
Instead use the information delivered by the devices ROM,
whether memory from a PCI BAR is prefetchable or not,
to decide whether it is mapped write-combined or not.
Ref genodelabs/genode#4578
Memory descriptors in PCI BARs have a prefetchable bit, which can
be used to optimize memory access when setting, e.g. write-combined
in page-table entries.
Ref genodelabs/genode#4578
The DHCP client used to always send packets with a size of 1024 regardless of
the size of the actual content, which was always significantly lower. 1024
bytes was simply a guess to provide enough space for all types of DHCP client
packets. As we know the exact size of each packet the DHCP client sends even
before packet creation, this commit makes use of the knowledge resulting in
much smaller packets sent by the DHCP client.
Fixes#4619
On some Cortex A9 platforms (Qemu 4.2.1 PBXA9), the IRQ status register is not
reliable. Sometimes, it indicates an IRQ too early, i.e., shortly before the
counter wraps. Therefore we have to accomplish wrap detection via counter
comparison only. We check whether the current counter value is higher than the
start counter value of the current timeout.
However, this implies that we have to take care to always read out the counter
before it hits the max timout value again. And, therefore, the max timeout
value has to be far away from the first value the counter has after wrapping.
Consequently, we propagate a max timeout value of half the max counter value.
Fixes#4209
* Remove wrapper for legacy x86 platform API
* Move PCI configuration space quirks to corresponding driver
(pc_usb_host_drv, pc_wifi_drv, pc_intel_fb_drv)
* Adapt driver test run-scripts to changed configuration
Ref genodelabs/genode#4578
Consumes the information about reserved memory region reports from
the devices ROM, and adds appropriated mappings to the corresponding
device PD.
Ref genodelabs/genode#4578
We need the information about reserved memory region reports
from the ACPI tables within the platform driver to pre-fill
IOMMU tables with the corresponding mappings. Therefore,
the pci_decode component now parses the information from the
ACPI ROM, and adds "reserved_memory" nodes to all related
devices in the devices report.
Ref genodelabs/genode#4578
In case of the GPU multiplexer, we need to delegate MMIO memory
to the framebuffer client in form of a managed dataspace. To be
able to attach a given Platform::Device::Mmio object to a region map
we need to access its capability.
Ref genodelabs/genode#4578
* Modernize routines, eliminate pointers, use constructibles, etc.
* Use absolute time instead of relative time consumption when
updating the scheduler
Ref genodelabs/genode#4151
This commit fixes two issues with the timeout lib and the base-hw src recipe:
* Add source files of timeout lib to recipe content.
The files weren't copied to the depot until now. However, the archive
nonetheless built successfully because of the second issue that is described
below.
* Get rid of the usage of the BASE_DIR variable in the timeout lib.
The BASE_DIR variable always resolves to the repos/base directory even when
building in a depot. That said, the use of BASE_DIR in make-files that are
not part of the build system itself must be avoided. Instead, REP_DIR,
REP_INC_DIR, and $(call select_from_repositories, ...) should be used.
Ref #4209
