* Update the 'packet_size' information with the actual length for
each isoc frame to be able to handle short reads at the client side.
* Copy the whole transfer buffer because the host controller stores
the data at the original offsets, i.e., the buffer is not densely
packed.
Fixes#4018.
When the usb_net_drv was introduced in ports/run/netperf.inc, the
netperf_lxip_usb test on x86_64/hw/pc triggered the calling of the
netif_stop_queue dummy at
contrib/<DDE_LINUX>/src/drivers/usb_net/drivers/net/usb/usbnet.c:1464. As
netif_start_queue was also a dummy and allowed to be called, we tried allowing
calls to the netif_stop_queue dummy as well which fixed the
netperf_lxip_usb test on x86_64/hw/pc.
Ref #3961
The Usb session allows for submitting packets even when the interface
in question is not yet enabled. Enabling an interface will configure
the udev members properly and is normally done implicitly during
processing of an 'ALT_SETTING' packet.
In case the interface was not enabled this leads to a page-fault in
the USB host-controller driver as 'ep' is NULL.
Fixes#3999.
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
In order to perform a smooth transition from NIC drivers that act only as NIC
session clients to NIC drivers that act only as Uplink session clients, this
commit introduces an intermediate state in which all NIC drivers support both
modes. That said, a NIC drivers mode is now statically determined through a new
optional 'mode' attribute in the drivers <config> tag that can be set to either
'nic_server' (default value) or 'uplink_client'. Reconfiguring this attribute
at a driver doesn't have any effects. Whithout this attribute being set, all
NIC drivers will behave the same as they did before the commit. When set to
'uplink_client', however, instead of providing a Nic service, they request
an Uplink session whenever their network interface becomes "UP" and close the
session whenever their network interface becomes "DOWN".
Ref #3961
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Thise driver supports USB LTE modems for Huawais' ME906s through MBIM
and provides a traditional Nic session. The "control" interface is a
Terminal session, which can be used via libmbim/mbimcli.
issue #3822
- Vendor devices add addtional data to the config descriptor, read and
added to the usb session
- allow '0' configuration within the usb session
issue #3822
The usb_hid driver does not need to distinguish between
normal memory and DMA capable memory, since all requests are routed via the
USB raw session to the usb host driver. The default Malloc implementation
implements this distinction, however exposes restrictions on the size of
allocations. As seen now by several USB HID devices, the size of device
driver allocations depend on read out hardware features and can be
larger than we support with our specialized default Malloc implementation.
Since we don't need this functionality, switching to an well
tested allocator (Heap) which can cope with varying sizes of allocation,
we can mitigate the size restriction.
Fixes#3953
This prevents later file-descriptor shortage when opening files on
demand, which can't be reflected to the application in a sane manner.
The real fix is to open socket files not on libc level but on VFS level
only effectively consume one libc file descriptor for one socket.
* get rid of alarm abstraction
* get rid of Timeout::Time type
* get rid of pointer arguments
* get rid of _discard_timeout indirection
* get rid of 65th bit in stored time values
* get rid of Timeout_scheduler interface
* get rid of uninitialized deadlines
* get rid of default arguments
* get rid of Timeout::_periodic
* get rid of Timeout::Raw
* use list abstraction
* only one interface for timeout handlers
* rework locking scheme to be smp safe
* move all method definitions to CC file
* name mutexes more accurate
* fix when & how to set time-source timeout
* fix deadlocks
Fixes#3884
The current version of the driver leaves the screen in a black state
after a mode change, e.g., when connecting an external display.
With this patch, the framebuffer content is fetched for the entire
screen after a mode change. Thanks to Sebastian Sumpf for investigating.
Issue #3878
The combination of Net::Mac_address and
Genode::ascii_to(Net::Mac_address) required shaky quirks in several
places because GCC is not able to resolve the ascii_to overload if
base/xml_node.h was included to early. The current solution moves the
several ascii_to overloads "closer" to the Net types by putting them
into the Net namespace, where GCC reliably picks them up.
Hence, co-locating the ascii_to() utility with the overload type in the
same scope/namespace is good practice.
This patch removes the now obsolete <nic/xml_node.h> header file.
* On this platform there is no need to zero out the framebuffer
dataspace, which is already blanked by core
* But it might happen that the GUI server is sending a capture
event before the zero out happens. Thereby screen content can get
lost
Fix#3878
Follow-up commit to fix the old usb_drv. Under rpi one and the
same irq can be requested several times. Therefore, we've to track
the Irq_connection objects.
Ref #3865
The Lx_kit::Irq abstraction of DDE Linux was always using the very first
interrupt of a Platform::Device stored in it. Instead of handing over the
platform device it is much more flexible and sane to hand over the actual
interrupt capability.
Ref #3865
By now, the enumeration of peripheral interrupts on Raspberry Pi 1 was
different in between base-hw kernel and Fiasco.OC. Therefore, hacks were
needed in every driver to request the correct interrupt number dependent
on the kernel. Before reproducing the same in the platform driver for rpi,
we can more easily use the same enumeration with base-hw.
Ref #3864
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
Passing array of unsigned chars to Genode::log() function
makes it converted to void pointer, resulting in printing its address.
Wrapping this array into Genode::Cstring solves this problem
and makes it being printed properly as zero-terminaled string.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3530
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
On muen, we don't have configured access to wifi so far. Thus, the wifi
driver doesn't come up and we should skip tests using this driver for
the platform.
Fix#3384
The libc features support for SOCK_CLOEXEC now which gets set via
the type argument in 'libnl'. Since we are only interested in the
actual type, i.e. if it is SOCK_RAW, just ignore the flags.
Issue #3289.
* Make package buildable for ARM too
* Move usb library to src targets for explicitly named targets
* adapt remaining run-scripts to use the correctly named usb drivers
Ref #2190
To enable the use of uncached DMA buffers as RX and TX communication
buffers in between driver (service) and client, introduce a cache
attribute in the constructor of Nic::Session_component
Ref #3291
This enforces the use of unsigned 64-bit values for time in the duration type,
the timeout framework, the timer session, the userland timer-drivers, and the
alarm framework on all platforms. The commit also adapts the code that uses
these tools accross all basic repositories (base, base-*, os. gems, libports,
ports, dde_*) to use unsigned 64-bit values for time as well as far as this
does not imply profound modifications.
Fixes#3208
This patch replaces the formerly fixed 2 KiB data alignment within the
packet-stream buffer by a server-defined alignment. This has two
benefits.
First, when using block servers that provide small block sizes like 512
bytes, we avoid fragmenting the packet-stream buffer, which occurs when
aligning 512-byte requests at 2 KiB boundaries. This reduces meta data
costs for the packet-stream allocator and also allows fitting more
requests into the buffer.
Second, block drivers with alignment constraints dictated by the
hardware can now pass those constraints to the client, thereby easing
the use of zero-copy DMA directly into the packet stream.
The alignment is determined by the Block::Session_client at construction
time and applied by the Block::Session_client::alloc_packet method.
Block-session clients should always use this method, not the 'alloc_packet'
method of the packet stream (tx source) directly. The latter merely
applies a default alignment of 2 KiB.
At the server side, the alignment is automatically checked by
block/component.h (old API) and block/request_stream.h (new API).
Issue #3274
This patch modernizes the 'Block::Session::info' interface. Instead of
using out parameters, the 'init' RPC function returns a compound 'Info'
object now. The rather complicated 'Operations' struct is replaced by
a 'writeable' attribute in the 'Info' object.
Fixes#3275
Replace the I/O response handler that is passed to the VFS at
construction with an object that is dynamically attached to handles.
This object shall also accept read-ready notifications, and plugins are
encouraged to keep handles awaiting ready-ready notifications separate
from handles that await I/O progress.
Replace the use of handle lists in plugins with handle queues, this
makes the code easier to understand and the ordering of notifications to
the application more explicit.
These changes replace the use of the Post_signal_hook from all VFS
plugins, applications must assume that read-ready and I/O notifications
occur during I/O signal dispatch and use an Io_progress_handler at its
entrypoints to defer response until after signal dispatching.
Fix#3257
The "Vfs::Vfs_handle" type should not contain any public members that
can be initialized by the VFS internally and by the application, so
remove inheritance from the "Genode::list::Element" class. The VFS
plugins must instead use lists of "Vfs::Vfs_handle" sub-classes, the
lifetime of which are always managed by the plugin.
Ref #3036
Use a single timeout scheduler passed during lxip instantiation for
both timers and 'schedule_timeout' facilites rather than instantiate
two timer sessions and signal handlers. This reduces the library's
capability cost and initialization time.
Fix#2961
This patch adjusts the implementation of the base library and core such
that the code no longer relies on deprecated APIs except for very few
cases, mainly to keep those deprecated APIs in tact for now.
The most prominent changes are:
- Removing the use of base/printf.h
- Removing of the log backend for printf. The 'Console' with the
format-string parser is still there along with 'snprintf.h' because
the latter is still used at a few places, most prominently the
'Connection' classes.
- Removing the notion of a RAM session, which does not exist in
Genode anymore. Still the types were preserved (by typedefs to
PD session) to keep up compatibility. But this transition should
come to an end now.
- Slight rennovation of core's tracing service, e.g., the use of an
Attached_dataspace as the Argument_buffer.
- Reducing the reliance on global accessors like deprecated_env() or
core_env(). Still there is a longish way to go to eliminate all such
calls. A useful pattern (or at least a stop-gap solution) is to
pass the 'Env' to the individual compilation units via init functions.
- Avoiding the use of the old 'Child_policy::resolve_session_request'
interface that returned a 'Service' instead of a 'Route'.
Issue #1987
* Increase the CMD length to accomodate the limit of the wpa_supplicant
* Fix case where multiple SSIDs with 32 bytes are used
* Use Expanding_reporter for accesspoints report
Fixes#3139.
On a Lenovo ThinkCentre M57p, the system locks up when the UHCI controller
BIOS handoff (disabling bit 4 in the LEGSUP register) for the controller
with PCI BDF 00:1d:2 is attempted before the handoff for the controller
with BDF 00:1a:0.
Fixes#3138
It can happen that a keyboard gets plugged in and 'led_connect()' is
called while the keyboard LED of another keyboard is just being updated
(and the registry is locked).
Fixes#3118
Since the timer and timeout handling is part of the base library (the
dynamic linker), it belongs to the base repository.
Besides moving the timer and its related infrastructure (alarm, timeout
libs, tests) to the base repository, this patch also moves the timer
from the 'drivers' subdirectory directly to 'src' and disamibuates the
timer's build locations for the various kernels. Otherwise the different
timer implementations could interfere with each other when using one
build directory with multiple kernels.
Note that this patch changes the include paths for the former os/timer,
os/alarm.h, os/duration.h, and os/timed_semaphore.h to base/.
Issue #3101
The Linux emulation library provides preprocessor macros for min() and
max(), which now clash with implementation in duration.h. So, we disable
those macros in the delay implementation.
Some application code is dereferencing the pointer returned by
'packet_content' at packet streams without checking that it is valid.
Throw an exception rather than return a null pointer, except for
zero-length packets, which have somewhat implicit invalid content and
that we believe to be properly handled in all current cases.
The client-side of a packet stream cannot take corrective action if the
server-side is sending packets with invalid content, but the servers
that provide packet streams should catch this exception to detect
misbehaving clients.
Ref #3059
The pthread API is considered a standard feature of libc so better to
simply merge it with the libc. Pthreads are in fact already a part of
the libc in the form of weak symbols. This merger is also a prerequisite
for better integrating pthreads with the libc I/O task.
Fix#3054
Move button-event reporting behind pointer-position update.
This is just a quickfix to restore correct pointer emulation with
dde_linux usb_drv. It does not change usb_hid_drv because the approach
is a questionable workaround of the current input event handling, which
reports events promptly on occurrence of inputs events and ignores
synchronization events completely. The original contrib code reported
the button press before absolute x and y positioning followed by a sync
event.
Issue #3019
The tasklet_schedule implementation was missing the unblock call, which
was no problem in the past because the correspending task would get un-
blocked by other work items. Now that every workqueue has its own task,
there is nobody left to unblock the task and thereby execute the
tasklet. As a tasklet is the only way to transmit any pending frames
after transmission was temporarily suspended - because the device/fw
was not able to process the TX request - this rendered 6xxx devices
unusable whenever this situation occurred.
Fixes#2973.
Rather than removing the source files during the port preration, which
breaks preparing the port anew, they are now removed while creating
the src archive.
Fixes#2959.
Since we use the git repo by now remove all unnecessary ballast like
unused code and the git history. The will bring down the wifi_drv's
src archive to reasonable size again.
The libc sockets implementation already syncs socket control files after
writes, so sync errors will induce failures for operations such as
"connect".
Fix#2920
This patch reintroduces the LwIP stack to libc as a VFS plugin
implementing the socket_fs interface. Rather than use LwIP's socket
emulation layer this plugin interfaces directly to LwIP raw API and is
single threaded.
The internal TCP parameters of the stack are untuned.
Fix#2050Fix#2335
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
It can happen that a keyboard gets plugged in and 'led_connect()' is
called while the keyboard LED of another keyboard is just being updated
(and the registry is locked).
Fixes#2869
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
When updating an interface in the NIC router to a new configuration and
the domain name of the interface has not changed but the domain
disappeared, the NIC router did not detach from the old domain correctly
which led to broken remnants of interface state objects (like connection
states).
Adapt the nic_router_uplinks run script to work with the fix.
Automated test for switching the NIC-router uplink between NIC driver and Wifi
driver with DHCP and different subnets. Tests also removal and later re-
insertion of the uplink domain tag.
Issue #2815
Rename LwIP library in preparation for removal of LwIP libc plugin. The
current LwIP library will be replaced with a new version stripped of its
synchronous socket support. The next version will be incompatible with
the current, so removing 'lwip.lib.so' completely for a period makes it
easy to identify legacy users.
Fix#2797
Socket_fs sockets are now created each time a 'new_socket' control file
is opened, not each time a 'new_socket' file is read. When a handle on a
'new_socket' file is closed the socket and its socket files are
destroyed. The accept control file on a listening socket reads "1" or
reads nothing to indicate a client connection is queued. Client sockets
are accepted by opening an 'accept_socket' file in the listen socket
directory. This file behaves like the aforementioned 'new_socket' file.
Ref #2707
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
Aligning memory to page size will require at lead 8KB per allocation (even for 8
bytes). This should severely reduce memory requirements of all dde_linux
projects.
related to #2731
The new 'Terminal_session::size_changed_sigh' RPC function registers a
signal handler that is triggered each time when the terminal size
changes. It enables the client to adjust itself to the new size by
subsequently calling the 'size' RPC function. Of all terminal servers,
only the graphical terminal triggers this signal.
According to the creator of the net-stat lib, this lib was a mere debugging
tool that is not used anymore nor worth the work of updating the it to
modern Genode coding paradigms. Also, there exist no tests for the lib.
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
Instead of storing whether the first item in the timeout list was already
programmed using the timer service, just program the first timeout in the
list unconditionally. In the past we lost a timeout at least when using the
usb ethernet driver on hw/arndale sporadically.
Linux does not do that in register_netdev() either. Some drivers set the
carrier flags on attach and never reenable it (as seen with rndis_host).
Consequently, the usbnet driver refuses to receive data as it checks the
carrier state before enqueuing new SKBs to its receive queue.
Apart from rndis_host, this change was tested with an ax88179_178a
device which worked as expected.
Until now the client called the Linux code directly through the EP
when sending ethernet frames and was not part of the driver's internal
task scheduling. This will lead to problems if the sending code needs
to grab a lock as those depend on running from within a Lx::Task.
Although this has only happend recently when using 8260 devices, this
is an issue that needs to be fix.
This commit addresses the issue by using a dedicated transmit task
in whose context the Linux code sends the ethernet frame or rather
newly allocated skb.
Fixes#2559.
Remove getaddrinfo and freeaddrinfo from the Libc::Plugin and get rid of
the extra libc_resolv library. Remove getaddrinfo/freeaddrinfo symbol
hiding patch for FreeBSD sources. Remove libc_resolv from Makefiles and
run scenarios.
Fix#2273
Linux del_timer() and mod_timer() return if the timer was pending before
the modification. Additionally, these functions are potentially called
from handler function of the timer to modify and, therefore, checking
for timeout != INVALID_TIMEOUT is not sufficient as the timeout is
indeed valid when the handler is executed.
Add a "writeable" policy option to the ahci_drv and part_blk Block
servers and default from writeable to ready-only. Should a policy
permit write acesss the session request argument "writeable" may still
downgrade a session to ready-only.
Fix#2469
When building Genode on a Linux system running in a Xen Dom0, the 'xen'
run target can run a Genode scenario in a Xen DomU.
Usage: in build/x86_*/etc/build.conf, define:
RUN_OPT = --include boot_dir/$(KERNEL) --include image/iso --include power_on/xen --include log/xen --include power_off/xen
The Xen DomU runs in HVM mode and loads Genode from an ISO image. Serial
log output is printed to the console and graphical output is shown in an
SDL window.
The Xen DomU ist managed using the 'xl' command line tool and it is
possible to add configuration options in the 'xen_args' variable in a run
script. Common options are:
- disabling the graphical output:
append xen_args { sdl="0" }
- configuring a network device:
append xen_args { vif=\["model=e1000,mac=02:00:00:00:01:01,bridge=xenbr0"\] }
- configuring USB input devices:
append xen_args { usbdevice=\["mouse","keyboard"\] }
Note: the 'xl' tool requires super-user permissions and interactive
password input can be troublesome in combination with 'expect' and is not
practical for automatic tests. For this reason, the current implementation
assumes that no password input is needed when running 'sudo xl', which can
be achieved by creating a file '/etc/sudoers.d/xl' with the content
'user ALL=(root) NOPASSWD: /usr/sbin/xl'
(where 'user' is the Linux user name).
Fixes#2504
The VFS library can be used in single-threaded or multi-threaded
environments and depending on that, signals are handled by the same thread
which uses the VFS library or possibly by a different thread. If a VFS
plugin needs to block to wait for a signal, there is currently no way
which works reliably in both environments.
For this reason, this commit makes the interface of the VFS library
nonblocking, similar to the File_system session interface.
The most important changes are:
- Directories are created and opened with the 'opendir()' function and the
directory entries are read with the recently introduced 'queue_read()'
and 'complete_read()' functions.
- Symbolic links are created and opened with the 'openlink()' function and
the link target is read with the 'queue_read()' and 'complete_read()'
functions and written with the 'write()' function.
- The 'write()' function does not wait for signals anymore. This can have
the effect that data written by a VFS library user has not been
processed by a file system server yet when the library user asks for the
size of the file or closes it (both done with RPC functions at the file
system server). For this reason, a user of the VFS library should
request synchronization before calling 'stat()' or 'close()'. To make
sure that a file system server has processed all write request packets
which a client submitted before the synchronization request,
synchronization is now requested at the file system server with a
synchronization packet instead of an RPC function. Because of this
change, the synchronization interface of the VFS library is now split
into 'queue_sync()' and 'complete_sync()' functions.
Fixes#2399
We used a hardware timer locally in the RPI USB driver because a timer
connection was not precise enough to fullfill the host controllers
requirements.
With the modern timer connection interface, however, reading out time at
a connection is microseconds precise and we can remove the local timer.
But we cannot use the same timer connection for doing legacy-interface
stuff like usleep (currently used in LX kit) and modern-interface stuff
like curr_time. Thus, we open two connections for now.
Ref #2400
Previously, the Genode::Timer::curr_time always used the
Timer_session::elapsed_ms RPC as back end. Now, Genode::Timer reads
this remote time only in a periodic fashion independently from the calls
to Genode::Timer::curr_time. If now one calls Genode::Timer::curr_time,
the function takes the last read remote time value and adapts it using
the timestamp difference since the remote-time read. The conversion
factor from timestamps to time is estimated on every remote-time read
using the last read remote-time value and the timestamp difference since
the last remote time read.
This commit also re-works the timeout test. The test now has two stages.
In the first stage, it tests fast polling of the
Genode::Timer::curr_time. This stage checks the error between locally
interpolated and timer-driver time as well as wether the locally
interpolated time is monotone and sufficiently homogeneous. In the
second stage several periodic and one-shot timeouts are scheduled at
once. This stage checks if the timeouts trigger sufficiently precise.
This commit adds the new Kernel::time syscall to base-hw. The syscall is
solely used by the Genode::Timer on base-hw as substitute for the
timestamp. This is because on ARM, the timestamp function uses the ARM
performance counter that stops counting when the WFI (wait for
interrupt) instruction is active. This instruction, however is used by
the base-hw idle contexts that get active when no user thread needs to
be scheduled. Thus, the ARM performance counter is not a good choice for
time interpolation and we use the kernel internal time instead.
With this commit, the timeout library becomes a basic library. That means
that it is linked against the LDSO which then provides it to the program it
serves. Furthermore, you can't use the timeout library anymore without the
LDSO because through the kernel-dependent LDSO make-files we can achieve a
kernel-dependent timeout implementation.
This commit introduces a structured Duration type that shall successively
replace the use of Microseconds, Milliseconds, and integer types for duration
values.
Open issues:
* The timeout test fails on Raspberry PI because of precision errors in the
first stage. However, this does not render the framework unusable in general
on the RPI but merely is an issue when speaking of microseconds precision.
* If we run on ARM with another Kernel than HW the timestamp speed may
continuously vary from almost 0 up to CPU speed. The Timer, however,
only uses interpolation if the timestamp speed remained stable (12.5%
tolerance) for at least 3 observation periods. Currently, one period is
100ms, so its 300ms. As long as this is not the case,
Timer_session::elapsed_ms is called instead.
Anyway, it might happen that the CPU load was stable for some time so
interpolation becomes active and now the timestamp speed drops. In the
worst case, we would now have 100ms of slowed down time. The bad thing
about it would be, that this also affects the timeout of the period.
Thus, it might "freeze" the local time for more than 100ms.
On the other hand, if the timestamp speed suddenly raises after some
stable time, interpolated time can get too fast. This would shorten the
period but nonetheless may result in drifting away into the far future.
Now we would have the problem that we can't deliver the real time
anymore until it has caught up because the output of Timer::curr_time
shall be monotone. So, effectively local time might "freeze" again for
more than 100ms.
It would be a solution to not use the Trace::timestamp on ARM w/o HW but
a function whose return value causes the Timer to never use
interpolation because of its stability policy.
Fixes#2400
This patch reduces the number of exception types by facilitating
globally defined exceptions for common usage patterns shared by most
services. In particular, RPC functions that demand a session-resource
upgrade not longer reflect this condition via a session-specific
exception but via the 'Out_of_ram' or 'Out_of_caps' types.
Furthermore, the 'Parent::Service_denied', 'Parent::Unavailable',
'Root::Invalid_args', 'Root::Unavailable', 'Service::Invalid_args',
'Service::Unavailable', and 'Local_service::Factory::Denied' types have
been replaced by the single 'Service_denied' exception type defined in
'session/session.h'.
This consolidation eases the error handling (there are fewer exceptions
to handle), alleviates the need to convert exceptions along the
session-creation call chain, and avoids possible aliasing problems
(catching the wrong type with the same name but living in a different
scope).
This patch replaces the 'Parent::Quota_exceeded',
'Service::Quota_exceeded', and 'Root::Quota_exceeded' exceptions
by the single 'Insufficient_ram_quota' exception type.
Furthermore, the 'Parent' interface distinguished now between
'Out_of_ram' (the child's RAM is exhausted) from
'Insufficient_ram_quota' (the child's RAM donation does not suffice to
establish the session).
This eliminates ambiguities and removes the need to convert exception
types along the path of the session creation.
Issue #2398
The old download location is very shaky resp. currently unavailable and
also other projects (e.g., Gentoo and Linux From Scratch) use this
location. Note, the archive hash does _not_ change.
By building the posix library as shared object with an ABI, we
effectively decouple posix-using programs from the library
implementation (which happens to depend on several os-level APIs such as
the VFS).
This commit moves the headers residing in `repos/base/include/spec/*/drivers`
to `repos/base/include/drivers/defs` or repos/base/include/drivers/uart`
respectively. The first one contains definitions about board-specific MMIO
iand RAM addresses, or IRQ lines. While the latter contains device driver
code for UART devices. Those definitions are used by driver implementations
in `repos/base-hw`, `repos/os`, and `repos/dde-linux`, which now need to
include them more explicitely.
This work is a step in the direction of reducing 'SPEC' identifiers overall.
Ref #2403
When creating a source archive for the USB driver, both the contrib and
Genode-specific source codes are merged into a single directory
structure. In this case, the original way of determining the Linux
source code to scan for #include directives would apply the scanning to
Genode-specific source codes too. This patch tightens the search
criterion such that only Linux source codes are processed.
This macro is implicitly pulled in by libc-setjmp (via the libc's
cdefs.h). However, apparently not all sources include <setjmp.h>.
Unfortunately, for sources that do, this change produces a
double-definition warning. We should fix it by removing the dependency
from the libc's setjmp.
Ldso now does not automatically execute static constructors of the
binary and shared libraries the binary depends on. If static
construction is required (e.g., if a shared library with constructor is
used or a compilation unit contains global statics) the component needs
to execute the constructors explicitly in Component::construct() via
Genode::Env::exec_static_constructors().
In the case of libc components this is done by the libc startup code
(i.e., the Component::construct() implementation in the libc).
The loading of shared objects at runtime is not affected by this change
and constructors of those objects are executed immediately.
Fixes#2332
The MIN_PSK_LENGTH constant was not adjusted to accommodate for the
semcantic change when switching from using the raw char array to using
the Genode::String class. The Genode::String::length() method includes
the terminating NUL byte while strlen() does not.
Fixes#2296.
The 'server_ip' and 'server_port' attributes for 'lxip/udp_client' and
'lwip/http_clnt' as well as the 'port' attribute for 'lxip/udp_echo' and
'lwip/http_srv_static' are not directly libc-related so they should not
live in the libc tag but in the config tag of the component.
Ref #2193
This commit includes changes to the Nic::Session_component interface.
We now pass the entire env to the component instead of only ram, rm and
the ep because we need the env to open connections from within the
Session_component implemenation. So far only the cadence_gem driver
needs this, though.
Issue #2280.
A binary file may be a temporary Vim .swp file when examining contrib
sources. The commit prevents build errors like
.../repos/dde_linux/lib/mk/lxip_include.mk:29:
target '.../x86_64/var/libcache/lxip_include/include/include/include/Binary'
given more than once in the same rule
.../repos/dde_linux/lib/mk/lxip_include.mk:29:
target '.../x86_64/var/libcache/lxip_include/include/include/include/file'
given more than once in the same rule
...
This commit enables compile-time warnings displayed whenever a deprecated
API header is included, and adjusts the existing #include directives
accordingly.
Issue #1987
To better support non-blocking terminal components, let the
'Terminal::Session::write()' function return the number of bytes
actually written.
Fixes#2240
Libc::Env is the Genode::Env interface extended to cover access
to the XML content of the 'config' ROM and a VFS instance. This
deduplicates the burden of components to attain and manage
these resources.
Fix#2217
Ref #1987
This patch removes the component_entry_point library, which used to
proved a hook for the libc to intercept the call of the
'Component::construct' function. The mechansim has several shortcomings
(see the discussion in the associated issue) and was complex. So we
eventually discarded the approach in favor of the explicit handling of
the startup.
A regular Genode component provides a 'Component::construct' function,
which is determined by the dynamic linker via a symbol lookup.
For the time being, the dynamic linker falls back to looking up a 'main'
function if no 'Component::construct' function could be found.
The libc provides an implementation of 'Component::construct', which
sets up the libc's task handling and finally call the function
'Libc::Component::construct' from the context of the appllication task.
This function is expected to be provided by the libc-using application.
Consequently, Genode components that use the libc have to implement the
'Libc::Component::construct' function.
The new 'posix' library provides an implementation of
'Libc::Component::construct' that calls a main function. Hence, POSIX
programs that merely use the POSIX API merely have to add 'posix' to the
'LIBS' declaration in their 'target.mk' file. Their execution starts at
'main'.
Issue #2199
Instead of creating one socket and re-using it each test run because the
client shall also test the termination of pseudo-connections at components that
implement hole punching for UDP.
Ref #2139
This patch unconditionally applies the labeling of sessions and thereby
removes the most common use case of 'Child_policy::filter_session_args'.
Furthermore, the patch removes an ambiguity of the session labels of
sessions created by the parent of behalf of its child, e.g., the PD
session created as part of 'Child' now has the label "<child-name>"
whereas an unlabeled PD-session request originating from the child
has the label "<child-name> -> ". This way, the routing-policy of
'Child_policy::resolve_session_request' can differentiate both cases.
As a consequence, the stricter labeling must now be considered wherever
a precise label was specified as a key for a session route or a server-
side policy selection. The simplest way to adapt those cases is to use a
'label_prefix' instead of the 'label' attribute. Alternatively, the
'label' attribute may used by appending " -> " (note the whitespace).
Fixes#2171
The 'connected_scan_interval' config attribute specifies the scan
interval in seconds. The commit also removes the deprecated ram_fs
component from the test run script.
This feature is not compatible with the forthcoming nonblocking parent
interface. The patch removes the use of feature in all places except for
the components of the demo repository, which will under go a redesign
anyway.
Issue #2120
Issue #2165
Instead of using a somewhat incomplete module_param_named() macro,
which will influence other drivers, patch the driver that requires
this treatment.
Fixes#2169Fixes#2155
drm_framebuffer_remove takes care of references to CRTC pointers before
freeing up framebuffer object. Directly calling the destroy function may cause
dangling CRTC pointers pointing inside the framebuffer object.
Fixes#2140
The usb_drv must always check the device pointer in all session facing.
methods. A errorneous client can otherwise trigger a page-fault in the
driver.
Fixes#2133.
- use the correct memory free functions on errors
- report packet submit errors
- rename 'Usb::Packet_descriptor::transfer.timeout' as
'Usb::Packet_descriptor::transfer.polling_interval'
Fixes#2135
The 11n mode can forcefully be disabled by setting the 'disable_11n'
attribute to 'true'. This is workaround for certain 6200 ABG cards
that apparently do not support this mode.
Fixes#2124.
Implementing this macro provides easy access to module parameters from
outside the contrib code, i.e. the driver frontend. For now it will be
solely used by the wifi_drv.
Issue #2124.
When run with the '--autopilot' run option, the 'usb_hid.run' script tests
the input events generated by a 'Pro Micro' microcontroller board. Setup
instructions for the Pro Micro can be found in the run script.
Fixes#2087
Besides adapting the components to the use of base/log.h, the patch
cleans up a few base headers, i.e., it removes unused includes from
root/component.h, specifically base/heap.h and
ram_session/ram_session.h. Hence, components that relied on the implicit
inclusion of those headers have to manually include those headers now.
While adjusting the log messages, I repeatedly stumbled over the problem
that printing char * arguments is ambiguous. It is unclear whether to
print the argument as pointer or null-terminated string. To overcome
this problem, the patch introduces a new type 'Cstring' that allows the
caller to express that the argument should be handled as null-terminated
string. As a nice side effect, with this type in place, the optional len
argument of the 'String' class could be removed. Instead of supplying a
pair of (char const *, size_t), the constructor accepts a 'Cstring'.
This, in turn, clears the way let the 'String' constructor use the new
output mechanism to assemble a string from multiple arguments (and
thereby getting rid of snprintf within Genode in the near future).
To enforce the explicit resolution of the char * ambiguity, the 'char *'
overload of the 'print' function is marked as deleted.
Issue #1987
Now, we support multi-touch devices generating multi-touch events and
absolute-pointer devices simultaneously with multitouch="yes". Still,
multitouch="no" generates emulated absolute-pointer events for
multi-touch devices.
On MVM only the initial scanning of APs works. If wpa_supplicant changes
from triggered scans to the scheduled-scanning hardware feature no
further scan results are reported. Therefore, we disable the
scheduled-scanning hardware feature until the issue is fixed.
Issue #2046
Session_label constructor now takes a bare string rather than a
serialized argument buffer.
Replace all instances of previous constructor with 'label_from_args'
function.
Issue #1787
* Align pitch value to 64 byte (thanks to cnuke for investigation)
* Get rid of extra dataspace retrival and attachment, now that we always buffer
* Consistently name all lx_emul helpers: lx_* (get rid of dde*)
* Add missing file headers
Fix#1997
Instead of providing a buffer to the client and blitting from that
to the "real" framebuffer as an option, with this commit we always do so.
Thereby its possible to immediately destroy the old framebuffer used by
hardware when a configuration change is done, and a new framebuffer
is used. This also simplifies the modesetting.
Moreover, this commit fixes an issue when not using the connector reporting.
Until now the initial mode detection of connectors was only done when
the report was created. this is a regression that entered the driver
when upgrading to the recent Linux kernel version.
Ref #1997
* remove all 'Genode::env()' calls
* use attached roms to read configuration
* use compoenent framework
* remove all PDBG, PINF, PWRN macros
Issue #1987Fixes#2019
Replace 'attribute(...).has_value("yes")`
with 'attribute_value(..., false)'.
This allows for boolean configuration to be set with values such as
"true", "false", "yes", "no", or "1", "0".
Fixes#2002
To circumvent problems on platforms with shaky hotplug interrupt notification
introduce a "poll" configuration option to the driver, which enables
polling for connector changes.
Fix#2004
The vanilla 'schedule_timeout()' Linux function expects a relative
timeout value. The first implementation of the wifi_drv, however, used
an absolute timeout value. This mismatch was overlooked when the
lx_kit, which adheres to the vanilla Linux semantics, was incoporated
in the driver.
Fixes#1990.
The modular lx_kit seperates the required back end functionality of the
Linux emulation environment from the front end. Thereby each driver can
reuse specific parts or supply more suitable implementations by itself.
It is used to reduce the amount of redundant code in each driver.
The lx_kit is split into several layers whose structure is as follows:
The first layer in _repos/dde_linux/src/include/lx_emul_ contains those
header files that provide the structural definitions and function
declarations of the Linux API, e.g. _errno.h_ provides all error code
values. The second layer in _repos/dde_linux/src/include/lx_emul/impl_
contains the implementation of selected functions, e.g. _slab.h_
provides the implementation of 'kmalloc()'. The lx_kit back end API is
the third layer and provides the _Lx::Malloc_ interface
(_repos/dde_linux/src/include/lx_kit/malloc.h_) which is used to
implement 'kmalloc()'. There are several generic implementations of the
lx_kit interfaces that can be used by a driver.
A driver typically includes a 'lx_emul/impl/xyz.h' header once
directly in its lx_emul compilation unit. The lx_kit interface files
are only included in those compilation units that use or implement the
interface. If a driver wants to use a generic implementation it must
add the source file to its source file list. The generic
implementations are located in _repos/dde_linux/src/lx_kit/_.
The modular lx_kit still depends on the private _lx_emul.h_ header file
that is tailored to each driver. Since the lx_kit already contains much
of the declarations and definitions that were originally placed in
these private header files, those files can now ommit a large amount
of code.
Fixes#1974.
This patch cleans up the thread API and comes with the following
noteworthy changes:
- Introduced Cpu_session::Weight type that replaces a formerly used
plain integer value to prevent the accidental mix-up of
arguments.
- The enum definition of Cpu_session::DEFAULT_WEIGHT moved to
Cpu_session::Weight::DEFAULT_WEIGHT
- New Thread constructor that takes a 'Env &' as first argument.
The original constructors are now marked as deprecated. For the
common use case where the default 'Weight' and 'Affinity' are
used, a shortcut is provided. In the long term, those two
constructors should be the only ones to remain.
- The former 'Thread<>' class template has been renamed to
'Thread_deprecated'.
- The former 'Thread_base' class is now called 'Thread'.
- The new 'name()' accessor returns the thread's name as 'Name'
object as centrally defined via 'Cpu_session::Name'. It is meant to
replace the old-fashioned 'name' method that takes a buffer and size
as arguments.
- Adaptation of the thread test to the new API
Issue #1954
This patch integrates three region maps into each PD session to
reduce the session overhead and to simplify the PD creation procedure.
Please refer to the issue cited below for an elaborative discussion.
Note the API change:
With this patch, the semantics of core's RM service have changed. Now,
the service is merely a tool for creating and destroying managed
dataspaces, which are rarely needed. Regular components no longer need a
RM session. For this reason, the corresponding argument for the
'Process' and 'Child' constructors has been removed.
The former interface of the 'Rm_session' is not named 'Region_map'. As a
minor refinement, the 'Fault_type' enum values are now part of the
'Region_map::State' struct.
Issue #1938
Currently the report name is used implicitly as first xml node name for the
report. This is inconvenient if one component wants to generate various xml
reports under various names (e.g. to steer consumers/clients slightly
differently) but with the same xml node tree structure.
Fixes#1940
Prevents the annoying warning about
WARNING: Image format was not specified for 'bin/test.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
This commit replaces the stateful 'Ipc_client' type with the plain
function 'ipc_call' that takes all the needed state as arguments.
The stateful 'Ipc_server' class is retained but it moved from the public
API to the internal ipc_server.h header. The kernel-specific
implementations were cleaned up and simplified. E.g., the 'wait'
function does no longer exist. The badge and exception code are no
longer carried in the message buffers but are handled in kernel-specific
ways.
Issue #610
Issue #1832
Interfaces that have been claimed by a component always have to be
released when the session is closed in case the component
malfunctioned.
Fixes#1869.
- Use 'label' attribute to identify device instead of
bus/dev and vendor_id/product_id
- Implement release_interface RPC
- Report 'label' as well as 'bus' and 'dev'
- Add policy handling to raw driver (includes reconfiguration
at runtime)
- Use own memory backing store for large DMA allocations
Issue #1863.
Instead of polling for new Nic session signals, when waiting for
network packets with a timeout, block on the signal receiver, and
register a timer event beforehand using the same signal receiver.
Fix#1862
Ref #1864
* enable i915 driver from Linux 3.14.5
* tested for generation 5 till 8 GPUs
The driver can be configured at run-time via the config ROM. Every
connector of the graphic card can be configured separately using the
following syntax
<config>
<connector name="LVDS-11" width="1280" height="800" enabled="true"/>
</config>
Also, when enabled within the intel framebuffer driver configuration like
the following
<config buffered="yes"/>
a simple ram dataspace is propagated to the client and the driver
itselfs copies from that buffer to the framebuffer triggered via refresh
calls. This option is useful to alleviate tearing effects.
The driver distributes all available connectors of the graphic card and
their supported resolutions via a report. It looks like follows
<connectors>
<connector name="LVDS-11" connected="1">
<mode width="1280" height="800" hz="60"/>
...
</connector>
...
</connectors>
The driver distributes the report only if this is stated within its
configuration, like the following
<config>
<report connectors="yes"/>
</config>
Fix#1764
platform_execute() is used to initially switch the stack of a
routine/task. While Thread_base::alloc_secondary_stack() properly aligns
the returned stack pointer the x86_64 assembler implementation did not
comply to stack frame management specified in the ABI.
The used (and most simple) stack-alignment check may pass a float to a
varargs function on x86, which requires the compiler to properly save
some XMM registers on stack.
Destroying an object within the scope of a lambda/functor executed
in the object pool's apply function leads potentially to memory corruption.
Within the scope the corresponding object is locked and unlocked when
leaving the scope. Therefore, it is illegal to free the object's memory meanwhile.
This commit eliminates several places in core that destroyed wrongly in
the object pool's scope.
Fix#1713
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:
repos/base/include/spec
repos/base/mk/spec
repos/base/lib/mk/spec
repos/base/src/core/spec
...
Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.
Fix#1673
Instead of returning pointers to locked objects via a lookup function,
the new object pool implementation restricts object access to
functors resp. lambda expressions that are applied to the objects
within the pool itself.
Fix#884Fix#1658
Run script depending on VFS plugins (i.e., shared objects) like
vfs_jitterentropy.lib.so have to state this dependency rather the actual
binaries linked against libc. The latter introduces a library dependency
that is just not there. For example, the dependency on vfs_jitterentropy
is a result from the config node for libc which automatically loads the
plugin.
Do not use slabs for allocations above 64KB, this seems to lead to memory
corruptions and the error described in issue #1613 under certain circumstances.
fixes#1613
Removed the Nic::Driver implementation. All nic servers now inherit from
Nic::Session_component. Packet stream signals are dispatched to
the 'handle_packet_stream' function within a session component. Thus, nic
servers now have direct access to the packet stream channels, making handling
more flexible.
Adjusted nic_loobpack, dde_ipxe, wifi, usb, lan9118, Linux nic, and OpenVPN to
the new interface.
Fixes#1602
With the server framework this becomes unnecessary. Also when the 'platform_drv'
has a lower priority, signaling will cause a constant load that starves the
'platform_drv'.
Fixes#1594
The report lists all connected devices and gets updated when devices are
added or removed.
Example report:
<devices>
<device vendor_id="0x17ef" product_id="0x4816"/>
<device vendor_id="0x0a5c" product_id="0x217f"/>
<device vendor_id="0x8087" product_id="0x0020"/>
<device vendor_id="0x8087" product_id="0x0020"/>
<device vendor_id="0x1d6b" product_id="0x0002"/>
<device vendor_id="0x1d6b" product_id="0x0002"/>
</devices>
There is no distinction yet for multiple devices of the same type.
The report is named "devices" and an example policy for 'report_rom' would
look like:
<policy label="vbox -> usb_devices" report="usb_drv -> devices"/>
The report only gets generated if enabled in the 'usb_drv' configuration:
<config>
<raw>
<report devices="yes"/>
</raw>
</config>
Fixes#1506
- send a 'state_change' signal on session creation if the device is
already attached
- evaluate the status code of a finished asynchronous operation
- return the number of actually transferred bytes for control transfers,
too
Fixes#1490
This patch adds const qualifiers to the functions Allocator::consumed,
Allocator::overhead, Allocator::avail, and Range_allocator::valid_addr.
Fixes#1481
