In the scope of alloc_dma_buffer(), Out_of_* exceptions might be thrown
at different stages. By adding a Guard object, we make sure to rollback
already created objects accordingly.
genodelabs/genode#5002
As a consequence of the adding IOMMU support to the platform driver,
additional RAM and CAPs are needed for setting up IO page-table
structures.
genodelabs/genode#5002
By adding the `irq_type` argument, one can explicitly specify whether to
use LEGACY, MSI or MSI-X interrupts. We formerly used the
`device_phys_config` to implicitly select MSI, however, with the
addition of IOMMU support to the platform driver there is at least one
instance where we need an MSI for a non-PCI device.
Yet, by adding another session argument to the Irq session, we exceed
the character limit for session args. Since not all arguments are
relevant for LEGACY interrupts resp. MSI, we can split the Irq_connection
constructor to handle the two cases separately and omit unneeded
arguments.
genodelabs/genode#5002
DMA buffer allocations are always performed as full pages. However, they
got mapped into the IOMMU domain using the requested size, which may not
be a multiple of the page size. This behaviour was introduced as a regression
by #4761 and is corrected by this commit.
genodelabs/genode#5002
The virtual add_range()-method must not be called from the base-class
constructor since the derived class is not be fully initialized at
this point.
genodelabs/genode#5002
This is a follow-up commit to the adaptation of the run scripts to the
consistent use of [build_artifacts] (issue #4860).
The missing build of libm remained undetected until the recent removal
of implicit shared-library builds (issue #5061).
This commit adds a new configuration option, `dst_addr` to the
'sntp_client' that accepts either an IP address or a DNS hostname. If a
DNS hostname is provided, the 'sntp_client' will resolve the IP address
before each SNTP request. The 'dst_ip' configuration option is
deprecated but kept for compatibility until 'dst_addr' is fully adopted.
xsd/net_types.xsd: add Net_address type
sntp_dummy_rtc: adjust configuration to use pool.ntp.org
Fixesgenodelabs/genode#5003
On x86, DMA buffers are actually always mapped as cached. We should
therefore actually ask for a cached buffer in order to avoid confusion.
genodelabs/genode#5000
The execution of global-static constructors in Genode is optional for
native components or determined in the libc for libc components. By
convention, we avoid static constructors wherever possible but in rare
cases the component can tweak the point when constructors are executed
and initialize an environment beforehand. The wifi_drv applies this
pattern for the uplink initialization, but is a libc component on the
other hand, and, thus, statics in the Genode C API for uplink are
constructed later by the libc. So, the prior initialization is reverted,
i.e. the signal-handler capability becomes invalid.
This addresses a regression exposed by the following commit.
drivers/wifi: perform multi-staged construction
Related to #3509Fixes#5024
Rename locally extended VCPU state from State to Vcpu_state for clarity.
The local namespace only adds two accessor methods, which does not
justify a local generic name.
Ref #4968
Make naming across architectures coherent by renaming Vm_state to
Vcpu_state, to reflect that it contains the state of a Vcpu and not that
of an entire VM.
Ref #4968
Per Affinity::Location a system control cap can be requested. The capability
provides an RPC interface to request and set Cpu_state, as provided by the
former Pd::managing_system(Cpu_state) method. Invocation of those system
control capabilities then *can* (see below) be executed on the desired CPU
as described by Affinity::Location.
The system control cap will be invalid for kernels that don't support
system_control/managing_system functionality at all.
The system control cap will be ever by the same, e.g. ignoring the
Affinity::Location parameter, if the used kernel doesn't support or doesn't
require the feature to execute the system control per CPU.
The commit is a preparation step to add guarded and selective x86 MSR
access per CPU.
Fixes#5009
In SDL2, support has been added for multiple windows.
As such, prior to this commit, invoking _sdl_screen.construct
would create a new window each time the original window was
resized.
To avoid this, refactor to only construct the window once, and
upon resize events, reconstruct the SDL_Surface and SDL_Texture
of Sdl_screen to the new window dimensions.
Issue identified by @chelmuth in https://github.com/genodelabs/genode/pull/4993#issuecomment-1729530634Fixes#4993
Following the official migration guide of SDL [1], the
fb_sdl framebuffer driver was update from SDL1 to SDL2.
The sdl2 port in world/src/lib/sdl2 is used.
Since SDL1 is in maintenance mode [2], support for other
display servers than X11 will never be implemented. In
particular, support for Wayland is missing from SDL1.
Fortunately, a port of sdl2 is maintained in genode-world.
As SDL2 is actively developed, it will provide support for
modern hardware architectures, and has mature support for
Wayland [3].
[1]: https://wiki.libsdl.org/SDL2/MigrationGuide
[2]: https://wiki.debian.org/Wayland#SDL1_.28unsupported.29
[3]: https://wiki.debian.org/Wayland#SDL2_.28supported_since_2.0.2.2B-.29
Issue #4993
A WRITE_ERR_WOULD_BLOCK may occur when large reports are written to a file
system because this fills up the submit queue of the packet-stream interface.
Fixesgenodelabs/genode#4988
Adds Genode::Hex_dump class to the formatted_output.h header. This class can be
used to print a hexadecimal dump of a byte range. The data is printed in a
format similar to that used by Linux's 'xxd'. In addition to the 'xxd' format,
consecutive duplicate lines are replaced with a single "*\n" as done also by
Linux's 'hexdump'.
Ref #4966
The DHCP client implementations of Ping originally is a copy of the NIC router
implementation adapted for Ping. The two versions diverged further over the
years. This issue should be solved by should merging them into a centralized
implementation. However, this commit treats only a recent issue with the
nic_uplink.run test on pbxa9 qemu but does this by re-aligning the two
implementations partially. The final merge should be done in a separate commit.
Ref #4966
* Removes the <event> tag from all test package runtime files and replaces the
contained <timeout> and <log> sub-tags with the new tags <succeed> and
<fail>. If a <succeed> or <fail> tag has a content, it defines a log pattern
that should be recognized and render the test failed or successful. If a
<succeed> or <fail> tag has an attribute after_seconds that is not set to 0,
it defines a timeout after which the test should be rendered failed or
successful.
* Adapts the Depot Autopilot to support the new syntax in the test-package
runtime files. However, for now, the Depot Autopilot is kept compatible to
the old syntax as well. If the <events> tag is present, it is prioritized
over the new syntax.
Fixes#4922
Several nightly network-related tests fail currently on sel4/pc because the
new e1000 NIC driver requires more capabilities. The "drivers nic" package
was already adapted to the new requirement but some tests fail to provide
enough caps to the corresponding sub system. This commit tries to fix all
remaining tests.
Ref #4923
* Adds a new component server/nic_uplink that forwards packets unmodified
between one Uplink session at one side and potentially multiple Nic sessions
at the other side.
* Adds a new run script nic_uplink.run that does a basic test with multiple
Nic clients on this component and adds it to the autopilot list.
* Adds a new depot recipe src/nic_uplink for this component.
* Adds a new depot recipe pkg/pc_nic for deploying the pc_nic_driver together
with a nic_uplink server. This allows for raw access to the network connected
to the Nic of the system in contrast to the commonly used routed and NAT'd
access via NIC router. That said, it enables the use of network protocols
not yet supported by the NIC router at the cost of less protection.
Ref #4966
Introduces a new class that does the clean-up if some exception is
thrown while creating the session. This reduces redundancy and overall
lines of code.
Ref #4966
by just test the migration feature, without relying on load measured on the
CPUs. On Qemu (and depending on other load in the Linux system), the migration
feature gets not triggered in time reliable.
This change allows a monitored VBox instance to specify a distinct
(lower) priority to the VM session to ensure that the VMM is always
prioritized higher than the VCPUs. This is important because host
I/O at the VMM should always be able to preempt a busy guest.
Issue #4917
The memory barriers where introduced with commit "test-timeout: fix build
errors with -std=gnu++20" presumably in order to prevent GCC optimization from
removing the empty for loops the test is using because using a volatile index
variable was no longer an option.
However, the memory barriers seem to have a negative effect on the measurements
performed with the affected loops. The commit caused the timeout test to fail
at least on imx53_qsb.
This commit fixes the issue by using a simple empty for loop without volatiles
or memory barriers but protected inside a function that is compiled with
optimization disabled.
Ref #4959
* add a sensible priority setup into the test script in order to protect
drivers and stack components from the demanding net clients
* delay the starting of the net clients by 5 seconds in order to give the
drivers and stack components some time to startup in peace
* use only explicit service routing and caps values
Ref #4923
Nitpicker's hover and focus reports contain an 'active' attribute, which
can be inspected for the detection of user activity, e.g., as trigger
for a screensaver or for dynamic clipboard policies.
When using the 'Event' session, the reporting code updated the reports
only on incoming events. This patch adds the periodic reporting as used
when using the old 'Input' session.
Issue #4950
