The frame-pointer-based backtrace does not work without enabling
-fno-omit-frame-pointer explicitly and in most cases leads to page
faults because non-pointer stack values are dereferenced during the
walk. The best we can do is to limit the backtrace walk to the stack of
the current thread to prevent page faults unrelated to the system state
without the use of the backtrace utility.
This commit introduces a printable Backtrace class usable in
Genode::log(), Genode::trace(), etc. The class is based on the new
function for_each_return_address(auto const &fn) that walks the stack in
its limits and calls fn() for each discovered return address on the
stack in the new os/include/os/backtrace.h. Archtecture-specific
stack-pointer retrieval and walk loops are implemented in dedicated
os/include/spec/<arch>/os/for_each_return_address.h files. Also, the
well-known Genode::backtrace() function (which logs the return-address
values) is provided for backwards compatibility.
Fixes#5078
This patch changes the unlink operation of the ram fs to defer the
destruction of a file until it is no longer referenced by any VFS handle.
When unlinked, the file no longer appears in the directory. But it can
still be opened and accessed.
With this change, a parent process of a Unix-like subsystem becomes able
to pass the content of an unlinked file to a forked child process. This
mechanism is required when using the 'exec' command in Tcl scripts.
Another use case is the 'tmpfile()' function.
Fixes#3577
The traced top instance was configured to be active every two seconds
whereas the trace test uses a grace time of only 1.5 seconds before
raising the FOREIGN state of a trace subject as an error.
The state of a trace subject can change only whenever the traced thread
passes a trace point. Hence, with the original configuration, the
release of top as trace subject can take up to two seconds. The patch
reduces the rate to 0.5 seconds to satisfy the expectation of
test-trace.
According to RFC 1812 ICMP Destination unreachable (Network unreachable)
does not quite our case of clients directly behind the router.
If a packet is to be forwarded to a host on a network that is directly
connected to the router (i.e., the router is the last-hop router) and
the router has ascertained that there is no path to the destination
host then the router MUST generate a Destination Unreachable, Code 1
(Host Unreachable) ICMP message.
Issue #4729
The argument was originally designated to restrict the reach of the
trace monitor but the idea remained unimplemented. It is now superseded
by the use of the trace-session label as trace-subject filter.
Issue #847
This patch changes core's TRACE service to expose trace subjects only if
their PD label matches the label of the TRACE monitor. Hence, by default,
a trace monitor can only observe itself and its child components. Only
if the trace monitor's parent rewrites the trace-session's label, the
view of trace monitor can become broader. For example, when rewriting
the trace label to an empty string "", the trace monitor becomes able to
observe the sibling components hosted in the same init instance as the
trace monitor.
To grant a trace session the special privilege of obtaining a global
system view (including the kernel's trace subjects), the top-level init
has to rewrite the session's label to an empty string. At core, this
specific label "init -> " is handled as a special case that discharges
the filtering/namespacing of trace subjects.
Note that the trace-subject label as reported as subject info is now
given relative to the label of the trace session. As a nice side effect
of this change, the pkg/test-trace_logger works now when executed by the
depot_autopilot as well as via the test.run script.
Issue #847
In the scope of alloc_dma_buffer(), Out_of_* exceptions might be thrown
at different stages. By adding a Guard object, we make sure to rollback
already created objects accordingly.
genodelabs/genode#5002
As a consequence of the adding IOMMU support to the platform driver,
additional RAM and CAPs are needed for setting up IO page-table
structures.
genodelabs/genode#5002
By adding the `irq_type` argument, one can explicitly specify whether to
use LEGACY, MSI or MSI-X interrupts. We formerly used the
`device_phys_config` to implicitly select MSI, however, with the
addition of IOMMU support to the platform driver there is at least one
instance where we need an MSI for a non-PCI device.
Yet, by adding another session argument to the Irq session, we exceed
the character limit for session args. Since not all arguments are
relevant for LEGACY interrupts resp. MSI, we can split the Irq_connection
constructor to handle the two cases separately and omit unneeded
arguments.
genodelabs/genode#5002
DMA buffer allocations are always performed as full pages. However, they
got mapped into the IOMMU domain using the requested size, which may not
be a multiple of the page size. This behaviour was introduced as a regression
by #4761 and is corrected by this commit.
genodelabs/genode#5002
The virtual add_range()-method must not be called from the base-class
constructor since the derived class is not be fully initialized at
this point.
genodelabs/genode#5002
This is a follow-up commit to the adaptation of the run scripts to the
consistent use of [build_artifacts] (issue #4860).
The missing build of libm remained undetected until the recent removal
of implicit shared-library builds (issue #5061).
This commit adds a new configuration option, `dst_addr` to the
'sntp_client' that accepts either an IP address or a DNS hostname. If a
DNS hostname is provided, the 'sntp_client' will resolve the IP address
before each SNTP request. The 'dst_ip' configuration option is
deprecated but kept for compatibility until 'dst_addr' is fully adopted.
xsd/net_types.xsd: add Net_address type
sntp_dummy_rtc: adjust configuration to use pool.ntp.org
Fixesgenodelabs/genode#5003
On x86, DMA buffers are actually always mapped as cached. We should
therefore actually ask for a cached buffer in order to avoid confusion.
genodelabs/genode#5000
The execution of global-static constructors in Genode is optional for
native components or determined in the libc for libc components. By
convention, we avoid static constructors wherever possible but in rare
cases the component can tweak the point when constructors are executed
and initialize an environment beforehand. The wifi_drv applies this
pattern for the uplink initialization, but is a libc component on the
other hand, and, thus, statics in the Genode C API for uplink are
constructed later by the libc. So, the prior initialization is reverted,
i.e. the signal-handler capability becomes invalid.
This addresses a regression exposed by the following commit.
drivers/wifi: perform multi-staged construction
Related to #3509Fixes#5024
Rename locally extended VCPU state from State to Vcpu_state for clarity.
The local namespace only adds two accessor methods, which does not
justify a local generic name.
Ref #4968
Make naming across architectures coherent by renaming Vm_state to
Vcpu_state, to reflect that it contains the state of a Vcpu and not that
of an entire VM.
Ref #4968
Per Affinity::Location a system control cap can be requested. The capability
provides an RPC interface to request and set Cpu_state, as provided by the
former Pd::managing_system(Cpu_state) method. Invocation of those system
control capabilities then *can* (see below) be executed on the desired CPU
as described by Affinity::Location.
The system control cap will be invalid for kernels that don't support
system_control/managing_system functionality at all.
The system control cap will be ever by the same, e.g. ignoring the
Affinity::Location parameter, if the used kernel doesn't support or doesn't
require the feature to execute the system control per CPU.
The commit is a preparation step to add guarded and selective x86 MSR
access per CPU.
Fixes#5009
In SDL2, support has been added for multiple windows.
As such, prior to this commit, invoking _sdl_screen.construct
would create a new window each time the original window was
resized.
To avoid this, refactor to only construct the window once, and
upon resize events, reconstruct the SDL_Surface and SDL_Texture
of Sdl_screen to the new window dimensions.
Issue identified by @chelmuth in https://github.com/genodelabs/genode/pull/4993#issuecomment-1729530634Fixes#4993
Following the official migration guide of SDL [1], the
fb_sdl framebuffer driver was update from SDL1 to SDL2.
The sdl2 port in world/src/lib/sdl2 is used.
Since SDL1 is in maintenance mode [2], support for other
display servers than X11 will never be implemented. In
particular, support for Wayland is missing from SDL1.
Fortunately, a port of sdl2 is maintained in genode-world.
As SDL2 is actively developed, it will provide support for
modern hardware architectures, and has mature support for
Wayland [3].
[1]: https://wiki.libsdl.org/SDL2/MigrationGuide
[2]: https://wiki.debian.org/Wayland#SDL1_.28unsupported.29
[3]: https://wiki.debian.org/Wayland#SDL2_.28supported_since_2.0.2.2B-.29
Issue #4993
A WRITE_ERR_WOULD_BLOCK may occur when large reports are written to a file
system because this fills up the submit queue of the packet-stream interface.
Fixesgenodelabs/genode#4988
Adds Genode::Hex_dump class to the formatted_output.h header. This class can be
used to print a hexadecimal dump of a byte range. The data is printed in a
format similar to that used by Linux's 'xxd'. In addition to the 'xxd' format,
consecutive duplicate lines are replaced with a single "*\n" as done also by
Linux's 'hexdump'.
Ref #4966
The DHCP client implementations of Ping originally is a copy of the NIC router
implementation adapted for Ping. The two versions diverged further over the
years. This issue should be solved by should merging them into a centralized
implementation. However, this commit treats only a recent issue with the
nic_uplink.run test on pbxa9 qemu but does this by re-aligning the two
implementations partially. The final merge should be done in a separate commit.
Ref #4966
* Removes the <event> tag from all test package runtime files and replaces the
contained <timeout> and <log> sub-tags with the new tags <succeed> and
<fail>. If a <succeed> or <fail> tag has a content, it defines a log pattern
that should be recognized and render the test failed or successful. If a
<succeed> or <fail> tag has an attribute after_seconds that is not set to 0,
it defines a timeout after which the test should be rendered failed or
successful.
* Adapts the Depot Autopilot to support the new syntax in the test-package
runtime files. However, for now, the Depot Autopilot is kept compatible to
the old syntax as well. If the <events> tag is present, it is prioritized
over the new syntax.
Fixes#4922
Several nightly network-related tests fail currently on sel4/pc because the
new e1000 NIC driver requires more capabilities. The "drivers nic" package
was already adapted to the new requirement but some tests fail to provide
enough caps to the corresponding sub system. This commit tries to fix all
remaining tests.
Ref #4923
* Adds a new component server/nic_uplink that forwards packets unmodified
between one Uplink session at one side and potentially multiple Nic sessions
at the other side.
* Adds a new run script nic_uplink.run that does a basic test with multiple
Nic clients on this component and adds it to the autopilot list.
* Adds a new depot recipe src/nic_uplink for this component.
* Adds a new depot recipe pkg/pc_nic for deploying the pc_nic_driver together
with a nic_uplink server. This allows for raw access to the network connected
to the Nic of the system in contrast to the commonly used routed and NAT'd
access via NIC router. That said, it enables the use of network protocols
not yet supported by the NIC router at the cost of less protection.
Ref #4966
Introduces a new class that does the clean-up if some exception is
thrown while creating the session. This reduces redundancy and overall
lines of code.
Ref #4966
by just test the migration feature, without relying on load measured on the
CPUs. On Qemu (and depending on other load in the Linux system), the migration
feature gets not triggered in time reliable.
This change allows a monitored VBox instance to specify a distinct
(lower) priority to the VM session to ensure that the VMM is always
prioritized higher than the VCPUs. This is important because host
I/O at the VMM should always be able to preempt a busy guest.
Issue #4917
The memory barriers where introduced with commit "test-timeout: fix build
errors with -std=gnu++20" presumably in order to prevent GCC optimization from
removing the empty for loops the test is using because using a volatile index
variable was no longer an option.
However, the memory barriers seem to have a negative effect on the measurements
performed with the affected loops. The commit caused the timeout test to fail
at least on imx53_qsb.
This commit fixes the issue by using a simple empty for loop without volatiles
or memory barriers but protected inside a function that is compiled with
optimization disabled.
Ref #4959
* add a sensible priority setup into the test script in order to protect
drivers and stack components from the demanding net clients
* delay the starting of the net clients by 5 seconds in order to give the
drivers and stack components some time to startup in peace
* use only explicit service routing and caps values
Ref #4923
Nitpicker's hover and focus reports contain an 'active' attribute, which
can be inspected for the detection of user activity, e.g., as trigger
for a screensaver or for dynamic clipboard policies.
When using the 'Event' session, the reporting code updated the reports
only on incoming events. This patch adds the periodic reporting as used
when using the old 'Input' session.
Issue #4950
While this approach still scans "holes" in the bus range, it stops
scanning at the maximum subordinate bus number reachable from the base
PCI bus at the host bridge. Startup under Qemu no longer takes about 12
seconds for scanning 256 buses.
On some platforms (x86_32/pistachio, x86_64/sel4) system startup is slow
and the previously configured 30 seconds not sufficient. With this commit, the
timeout is raised to 60 seconds only when running on such a platform.
Ref #4923
This test was originally a copy of ping.run and therefore unnecessarily
inherited all its complexity for testing ping component behavior. Additionally,
ping.run was more actively maintained and evolved over time whereas
nic_dump.run didn't receive the same care. Now, the test fails on certain
platforms although NIC dump works just fine. Therefore, this commit reduces the
test behavior to what is really necessary for testing nic_dump and by doing so,
also fixes the failing targets.
Fixes#4926
On x86_32 okl4, the test timed out although the test timeout was already at
240 seconds for this platform. Instaed of raising it further, this commit
reduces the number of ping rounds for all platforms that are considered as
slower by the test.
Ref #4923
The new monitor component at os/src/monitor is the designated successor
of the gdb_monitor. This initial version, however, implements only the
subset needed to inspect the memory of the monitored component(s).
In contrast to the gdb_monitor, the new component supports the monitoring
of multiple components, leveraging the sandbox API. It can therefore be
used as a drop-in replacement for the init component. Like the gdb_monitor,
the new monitor speaks the GDB protocol over Genode's terminal session.
But the protocol implementation does not re-use any gdbserver code,
sidestepping the complexities of POSIX.
There exist two run scripts illustrating the new component. The
os/run/monitor.run script exercises memory inspection via the 'm' command
by letting a test program monitor itself. The os/run/monitor_gdb.run
script allows for the interactive use of GDB to interact with monitored
components.
Issue #4917
Let the sandbox library disregard all unknown config sub nodes so that
supplemental information - like the monitor policy configuration - is
not interpreted as a misconfiguration ("unknown config element type ...").
Issue #4917
By default, the sandbox uses the Env::pd() as reference PD session of
the sandbox children.
However, to accomodate use cases where the interplay of the reference
PD session and the child's address space needs to be intercepted, this
patch adds a constructor that takes an interface for the controlled
access of PD intrinsics as argument.
Issue #4917
* add semaphore command to ring in order to be able to stop ring
execution before reset (Wa KabyLake)
* implement reset sequence as done by the Linux driver
* reset ring and cancel job of vgpu causing hang
* lower watchdog timeout 1000ms -> 200ms
* improve scheduling of vgpus so progress after reset is made
* improve the generation chaos a little
* tested on Skylake, Kaby Lake, Tiger Lake
issue #4916
By transforming the Device_pd into an Io_mmu::Domain, we implement an
IOMMU device that uses the kernel API for controlling the IOMMU. This
device gets special treatment and is used by default for every device
that has no <io_mmu/> child.
genodelabs/genode#4761
Every session component manages a registry of Io_mmu::Domain objects
that it creates on demand depending on the acquired devices (i.e. the
IOMMU devices referenced by the acquired devices). Via the domain
objects, a session component adds/removes the address ranges of the
allocated DMA buffers. Additionally, domain objects provide an interface
for enabling/disabling pci devices.
Domain objects get destroyed with the corresponding control device.
Moreover, on devices/policy ROM updates, domain objects of control
devices that are not referenced by any acquired device anymore get destroyed.
genodelabs/genode#4761
This allows referencing an arbitrary number of IOMMU devices within a
<devices> node, e.g.:
<device>
<io_mmu name="foobar"/>
</device>
The specified name is supposed to refer to an existing device in the
devices ROM. The platform driver automatically acquires known IOMMU
devices whenever they become available so that the device object can be
looked up from the platform-driver-owned devices.
genodelabs/genode#4761
With this change, platform-specific code is able to define factories that
acquire IOMMU devices to be used by the platform driver.
genodelabs/genode#4761
The method did not handle device changes properly. When a new policy
does not contain an owned device any more, we must consider this device
as changed and release it. Moreover, the warning messages were interchanged.
genodelabs/genode#4761
"-cpu phenom" does not support all CPU instructions necessary with
gcc 12 toolchain update issuing more SSSE3, e.g. pshufb.
Additionally, remove good/bad Qemu version check of outdated versions.
Issue genodelabs/genode-world#329
