Whether an SoC has the multiprocessing extensions can be read out
from the identification registers, and does not need to be specified
in each board header.
Ref #3445
In the past, the core-only privileged syscall `update_pd` was used only
to invalidate the TLB after removal of page-table entries.
By now, the whole TLB at least for one protection domain got invalidated,
but in preparation for optimization and upcomingARM v8 support,
it is necessary to deliver the virtual memory region that needs to get
invalidated. Moreover, the name of the call shall represent explicitely
that it is used to invalidate the TLB.
Ref #3405
On x86 the CPU count is determined through ACPI's MADT by counting the
local APICs reported there. Some platforms report more APICs
than there are actual CPUs. These might be physically disabled CPUs.
Therefore, a check if the LAPIC is actually physically enabled in
hardware fixes this issue.
Thanks to Alex Boettcher
fixes#3376
Fix initial stack pointer alignment for x86_64 in crt0.s startup code of
bootstrap. SysV ABI states that upon function entry (rsp + 8) % 16 = 0.
There, we have to align the stack to 16 bytes before all 'call'
instruction not 8. Otherwise FPU (GP) exception might be raised later on
because of unaligned FPU accesses.
issue #3365
Since gcc 8.3.0 generates SSE instructions into kernel code, the
kernel itself may raise FPU exceptions and/or corrupt user level FPU
contexts thereby. Both things are not feasible, and therefore, lazy FPU
switching becomes a no go for base-hw because we cannot avoid FPU
instructions because of the entanglement of base-hw, base, and the tool
chain (libgcc_eh.a).
issue #3365
Also disable TS (task switch) flag in cr0 during kernel initialization,
so FPU faults are not raised. This became necessary since GCC lately
aggressively generates FPU instructions at arbitrary places and also at
early kernel-bootstrapping stages.
fixes#3365
Components like kernel, core, and bootstrap that are built for a
specific board need to reside inside the same architectural dependent
build directory. For instance there are sel4, foc, and hw kernel builds
for imx6q_sabrelite and imx7d_sabre, which have to reside inside the same
arm_v7 build directory.
This commit names those components explicitely, and adapts the run-tool to it.
Fix#3316
This enforces the use of unsigned 64-bit values for time in the duration type,
the timeout framework, the timer session, the userland timer-drivers, and the
alarm framework on all platforms. The commit also adapts the code that uses
these tools accross all basic repositories (base, base-*, os. gems, libports,
ports, dde_*) to use unsigned 64-bit values for time as well as far as this
does not imply profound modifications.
Fixes#3208
Instead of using `cps` instruction, use an exception return
instruction to switch from `hyp` mode to `svc` mode.
Otherwise it causes unpredicted behaviour on ARM.
Fix#3284
Track the dataspaces used by attach and add handling of flushing VM space
when dataspace gets destroyed (not triggered via the vm_session interface).
Issue #3111
Triggering of an invalidated signal seems to be no real exception,
but something that occurs regularily. Therefore, the kernel warning
is of no use to developers anymore.
Ref #3277
As far as possible remove usage of warning/error/log in the kernel,
otherwise the kernel context might try to take a lock hold by a core
thread, which results in a syscall to block.
Fix#3277
* Introduces pending_signal syscall to check for new signals for the
calling thread without blocking
* Implements pending_signal in the base-library specific for hw to use the
new syscall
Fix#3217
* Introduce 64-bit tick counter
* Let the timer always count when possible, also if it already fired
* Simplify the kernel syscall API to have one current time call,
which returns the elapsed microseconds since boot
In commit "hw: improve cross-cpu synchronization" the implicit safe
initialization of the global kernel lock gets unsafe.
It is a static object, which is protected by the cxx library regarding
its initialization. But our cxx library uses a Genode::semaphore in
the contention case of object construction, which implicitly leads
to kernel syscalls for blocking the corresponding thread. This behaviour
is unacceptable for the kernel code.
Therefore, this fix guards the initialization of the kernel code with
a simple static boolean value explicitely.
Ref #3042
Ref #3043
This commit removes APIs that were previously marked as deprecated. This
change has the following implications:
- The use of the global 'env()' accessor is not possible anymore.
- Boolean accessor methods are no longer prefixed with 'is_'. E.g.,
instead of 'is_valid()', use 'valid()'.
- The last traces of 'Ram_session' are gone now. The 'Env::ram()'
accessor returns the 'Ram_allocator' interface, which is a subset of
the 'Pd_session' interface.
- All connection constructors need the 'Env' as argument.
- The 'Reporter' constructor needs an 'Env' argument now because the
reporter creates a report connection.
- The old overload 'Child_policy::resolve_session_request' that returned
a 'Service' does not exist anymore.
- The base/printf.h header has been removed, use base/log.h instead.
- The old notion of 'Signal_dispatcher' is gone. Use 'Signal_handler'.
- Transitional headers like os/server.h, cap_session/,
volatile_object.h, os/attached*_dataspace.h, signal_rpc_dispatcher.h
have been removed.
- The distinction between 'Thread_state' and 'Thread_state_base' does
not exist anymore.
- The header cpu_thread/capability.h along with the type definition of
'Cpu_thread_capability' has been removed. Use the type
'Thread_capability' define in cpu_session/cpu_session.h instead.
- Several XML utilities (i.e., at os/include/decorator) could be removed
because their functionality is nowadays covered by util/xml_node.h.
- The 'os/ram_session_guard.h' has been removed.
Use 'Constrained_ram_allocator' provided by base/ram_allocator.h instead.
Issue #1987
This patch adjusts the implementation of the base library and core such
that the code no longer relies on deprecated APIs except for very few
cases, mainly to keep those deprecated APIs in tact for now.
The most prominent changes are:
- Removing the use of base/printf.h
- Removing of the log backend for printf. The 'Console' with the
format-string parser is still there along with 'snprintf.h' because
the latter is still used at a few places, most prominently the
'Connection' classes.
- Removing the notion of a RAM session, which does not exist in
Genode anymore. Still the types were preserved (by typedefs to
PD session) to keep up compatibility. But this transition should
come to an end now.
- Slight rennovation of core's tracing service, e.g., the use of an
Attached_dataspace as the Argument_buffer.
- Reducing the reliance on global accessors like deprecated_env() or
core_env(). Still there is a longish way to go to eliminate all such
calls. A useful pattern (or at least a stop-gap solution) is to
pass the 'Env' to the individual compilation units via init functions.
- Avoiding the use of the old 'Child_policy::resolve_session_request'
interface that returned a 'Service' instead of a 'Route'.
Issue #1987
- support to create multiple vCPUs
- support to implement Vm_session methods client side within base library
- adjust muen specific virtualbox4 version to compile/link
Issue #3111
As we don't execute the acpi_drv on Muen, we have to supply a static
'acpi' info as boot module. This is normally done by the
base/run/platform.inc include. However, when using base-hw-muen kernel
from a depot archive - as done by modern run scripts like
depot_download.run - the platform.inc magic is not applied.
This patch enhances the src archive of base-hw-muen with a mechanism
that creates a pre-defined acpi info at the bin directory via an
artificial src/acpi/target.mk file. This way, the static acpi ROM ends
up as boot module when importing the base-hw-muen archive into a
run script.
This patch replaces the former prominent use of pointers by references
wherever feasible. This has the following benefits:
* The contract between caller and callee becomes more obvious. When
passing a reference, the contract says that the argument cannot be
a null pointer. The caller is responsible to ensure that. Therefore,
the use of reference eliminates the need to add defensive null-pointer
checks at the callee site, which sometimes merely exist to be on the
safe side. The bottom line is that the code becomes easier to follow.
* Reference members must be initialized via an object initializer,
which promotes a programming style that avoids intermediate object-
construction states. Within core, there are still a few pointers
as member variables left though. E.g., caused by the late association
of 'Platform_thread' objects with their 'Platform_pd' objects.
* If no pointers are present as member variables, we don't need to
manually provide declarations of a private copy constructor and
an assignment operator to avoid -Weffc++ errors "class ... has
pointer data members [-Werror=effc++]".
This patch also changes a few system bindings on NOVA and Fiasco.OC,
e.g., the return value of the global 'cap_map' accessor has become a
reference. Hence, the patch touches a few places outside of core.
Fixes#3135
This patch moves the removal of the signal context from the
'_platform_finish_dissolve' to the '_platform_begin_dissolve'
method. This is needed because the removal involves taking
the signal-registry lock. The latter must adhere the same
locking order as the code path used for signal delivery.
Fixes#3109
