According to spec the tail pointer points to the next qword instructions
which will be used by the software.
p 1354, Doc Ref # IHD-OS-BDW-Vol 2c-11.15
issue #4254
Superpages (2M, 1G) are not supported by now, but partially copied over code
from base-hw was around. Remove unused register definitions and remove
non-working super page code do avoid confusion.
issue #4254
Size argument of ggtt free range check is ignored, which leads to
overlapping allocations inside, which leads to unavailable IO-MEM exceptions
thrown by core.
issue #4254
Both, trace_logger and vfs_trace had their own trace_buffer.h. This
commit consolidates the existing implementations and provides the
resulting trace_buffer.h at 'include/trace/'. It thereby becomes part of
the trace api archive.
genodelabs/genode#4244
Driver code such as mfd-core.c may pass 0 as argument n to kcalloc,
which eventually results in an allocation size 0.
res = kcalloc(cell->num_resources, sizeof(*res), GFP_KERNEL);
Since 'res' is checked against NULL for success, kmalloc must not return
a NULL pointer in this case. The patch works around this issue by
forcing an allocation size of 1 byte in this case.
Issue #4253
Clock providers such as drivers/clk/sunxi-ng/ccu-sun8i-r.c don't use
regular init calls but declare their init functions via CLK_OF_DECLARE,
which fill the __clk_of_table. Linux populates the table statically by
using special sections declared in the linker script. In contrast, we
populate the table by expanding the macro to global constructor
functions.
The __clk_of_table is then processed by the call of of_clk_init(NULL).
Issue #4253
* Disable trace source and release ownership on subject destruction.
* Note, since the policy module is also destroyed on descruction of the
session component, the traced component must not access the policy
module when acknowledging the disabled state (else: page fault).
Fixesgenodelabs/genode#4247
If the trace subjects are not properly destructed when the TRACE client
disappears, enabled sources will be owned by a non-existing client.
In other words, when a TRACE client disappears all sources owned by the
client must be disabled.
genodelabs/genode#4247
test-trace always passed, although tracing was never enabled because the
trace subject was not within the first 32 subjects.
* increase number of queried subjects
* output error if trace subject was not found
genodelabs/genode#4247
With this commit, the NIC router DHCP client reads out the first DNS domain
name (DHCP option 15) if any from a DHCP reply that generates an IPv4 config
for a domain and stores the name together with the IPv4 config for that domain.
DNS domain names are reported via the new report tag '<dns-domain>' if the
'config' attribute in the config tag '<report>' is set.
Furthermore, the NIC router DHCP server becomes able to obtain a DNS domain
name from another domain that has a DHCP client dynamically (given the config
attribute 'dns_config_from' is set and no static DNS config is given) or
statically from its configuration (new config tag '<dns-domain>') and propagate
this name with DHCP replies (DHCP option 15).
The 'nic_router_dhcp_*' tests are adapted to test the new feautures.
The commit also gets rid of some mirrored files in
'test/nic_router_dhcp/manager'.
Fixes#4246
WARNING: BREAKS CONFIG COMPATIBILITY!
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
How to adjust:
At each occurrence of the 'dns_server_from' attribute in a NIC router
configuration replace the attribute name with 'dns_config_from'. The attribute
value remains unaltered.
DETAILED DESCRIPTION
The new attribute name 'dns_config_from' reflects that also other aspects of
the DNS configuration of the denominated domain are used by the DHCP server
that holds the attribute. This commit is a preparation for forwarding also the
domain name (DHCP option 15) with the mechanism behind the attribute.
Ref #4246
The fact that the IPv4 config was a struct with all data members public was a
mere leftover of an early state of the NIC router. Today, the router
implementation style is to avoid structs and public data members wherever
possible.
This commit slightly changes the behavior of the router regarding log output.
The router used to print malformed IPv4 configurations to the log only if
the 'verbose' config flag was set using this style:
! [my_domain] malformed dynamic IP config: interface 10.0.2.1/24 ...
Now, malformed IPv4 configurations are only printed if the
'verbose_domain_state' config flag is set (like with any IP4v configuration
states) using this style:
! [my_domain] dynamic IP config: malformed (interface 10.0.2.1/24 ...)
Fixes#4242
The NIC router DHCP server used to add an extra option 6 field to DHCP replies
for each DNS server address. This conflicts with RFC #2132 section 3.8 which
states that the addresses should be listed within one option 6 field without
delimiter. The discrepancy is fixed by this commit.
Ref #4242
File size must be the same as the number of bytes that can be read from
the file. Otherwise, this will trigger a `Truncated_during_read`
exception.
Fixesgenodelabs/genode#4240
Via a new configuration attribute, the user can decide whether the router
should answer dropped fragmented IPv4 with an ICMP "destination unreachable"
packet and, if so, which value the ICMP code field of this packet should have.
The default is that the router doesn't send such responses (silently dropping
fragmented IPv4). The behavior is tested by the 'nic_router_ipv4_fragm' test.
Fixes#4236
If the new attribute 'dropped_fragm_ipv4' of the <report> tag in the NIC router
config is set "yes", the router will report the number of packets that were
dropped per interface respectively domain because fragmented IPv4 is not
supported. The default is not to report the counter. The behavior is tested by
the 'nic_router_ipv4_fragm' test.
Ref #4236
The NIC router used to ignore the IPv4 header fields "More fragments" and
"Fragment offset" completely. Therefore higher-level protocols of fragmented
IPv4 were interpreted wrong because each fragment was considered a self-
standing packet, expecting, for instance UDP/TCP headers somewhere inside of
the UDP/TCP data field. Normally, such packets were dropped as soon as the
UDP/TCP checksum check failed because of the misinterpretation. However,
it was also possible for fragmented IPv4 to pass the router although normally
only partially.
IPv4 fragmentation support in the router would introduce some potential
security risks and is presumably not an easy endeavor. So, for now, we settled
on not supporting IPv4 fragmentation. With this commit, the router simply drops
all fragmented IPv4. This is reflected to the log for each fragment as "drop
packet (fragmented IPv4 not supported)" when 'verbose_packet_drop="yes"' is
configured.
The new test 'run/nic_router_ipv4_fragm' is an automated test for this
behavior. The test is added to the autopilot list.
Ref #4236
- remove redundant file system factory
- remove dead code block
The code was guarded by preprocessor directives checking whether the
contrib code define "_USE_MKFS" is 1. As "_USE_MKFS" is not set one
for our port of FAT, the code was never executed and can be removed.
- remove uneffective config attributes
Apparently, the former XML attributes to the plugin 'drive' and
'codepage' had no effect. I tested them in a scenario with the VFS
block server on a disk-image boot-module as back end. Regardless of
the 'drive' value, the block session label was always "0". Regardless
of the 'codepage' value, the FAT on the disk image succeeded to mount
when not using '--codepage' for 'mkfs.fat' and failed to mount when
using '--codepage' to specify a supported but foreign codepage for
'mkfs.fat' (e.g. "720").
Ref #4220
There was one global static constructor:
! namespace Fatfs { static Constructible<Platform> _platform; }
This caused applications that used the lib or the <fatfs> VFS plugin to end up
in an uncaught exception due to Genode::Component complaining that method
'construct' returned without executing pending static constructors if they
didn't call Genode::Env::exec_static_constructors().
As the use of Genode::Env::exec_static_constructors() is discouraged in Genode,
this commit rather moves the '_platform' object to the scope of the
initializing function and introduces a global static pointer to the object that
gets set by the initializing function. Although this prevents the exception, it
is, technically speaking even worse than the former solution as the new pointer
isn't checked for validity in contrast to the 'Constructible' object.
However, so far, I don't see a clean solution to this problem without the need
for Genode::Env::exec_static_constructors().
Fixes#4220
* the GPU multiplexer now offers the platform service to the Intel
framebuffer driver (driver_manager)
* ajdusted drivers_managed-pc to hand out resources to the GPU driver
* adjust quotas
issue #4233
The platform services is intented to be used by dde_linux's intel_fb_drv
in order to initlialize displays.
* implement and announce platform session
* limit accessible GTT and aperture of client to 64 MB
* forward display engine IRQs to platform client
* move all PCI resources to 'Igd::Resources' class in order to make them
accessible by the platform service and the GPU driver
* fix fence register allocation for id zero (return true)
issue #4233
For mesa-21 the client takes care and manages
the virtual address space of the vGPU by itself and the intel/gpu driver
can't add silently a guard page anymore. Move the patch to the drm/ioctl
of the former mesa version.
Issue #4148#4233
_unmap_dataspace_ggtt requires the cap of Ggtt::Mapping (ring_map, ctx_map)
in order to find the right metadata and to free up the ggtt entries. Also the
pte range is removed already if the metadata was found.
Issue #4148#4233
BREAKS CONFIG COMPATIBILITY:
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
HOW TO ADJUST:
At each occurrence of the '<uplink ...>' tag in a NIC router configuration
replace the tag name 'uplink' with 'nic-client'. The rest of the tag stays the
same.
The term "uplink" for network interfaces in the router that have a NIC session
client as back end was introduced in a time when Uplink sessions didn't yet
exist. Now, they do and, although both an uplink and an Uplink session
normally describe a network session between router and network device driver,
they are based on two different service types (NIC and Uplink). This can easily
cause confusion when integrating the router (the <uplink> is not related to
Uplink sessions) or trying to understand its functioning (an 'Uplink' object
has nothing to do with the Uplink service).
Therefore, this commit introduces the more specific term "NIC client" for an
interface that is based on a NIC session requested by the router. This doesn't
imply any semantic changes at the NIC router. However, the commit also brings a
broader update of the router's README and removes the term "downlink" that was
used only in documentation to refer to interfaces backed by a NIC session
provided by the router. The term was only associated with this meaning because
it is the natural counterpart to an uplink. This isn't appropriate anymore as
the terms for interface types have moved to a more technical level.
The commit adjusts all scenarios in the basic Genode repositories properly.
Fixes#4238
An interface that received a signal for a link-state change accessed its
domain reference without assuming that it could not be attached to a domain
at that moment. This caused the NIC router to crash with an uncaught exception
of type 'Net::Pointer<Net::Domain>::Invalid'. The commit adds a catch
directive for this exception resulting in the handler doing nothing if not
attached to any domain.
Fixes#4222
The test script failed during preparation of the on-target execution for
USB Armory with the following error:
! can't read "tz_vmm_block_irq": no such variable
Presumably, the script wasn't run anymore since the introduction of the
'tz_vmm_block_irq' variable for i.MX53 QSB. As we do not have infrastructure
for automated testing of the USB Armory and there seems to be not much
interest in using Genode on this platform, this commit simply removes the
support from the script.
Filtering boards in a run script by specs isn't the right way anymore (the
specs do not exist anymore). Nowadays, we have to use [have_board] instead.
Ref #4229
For unknown reasons, the former 'wget genode.org' call, that was meant to test
network in the Trustzone guest on imx53_qsb_tz, didn't succeed anymore although
the same call succeeded on my Sculpt VM Linux. However, 'ping 1.1.1.1' still
works, so, the script now uses this as test for networking instead.
Fixes#4229
So far, in order to create an ARP reply, the NIC router merely created a copy
of the corresponding ARP request and modified only those values that differ.
This approach has the disadvantage of re-using bad parameters from a broken
request. The specific use-case that made this visible was an early version of
the Pine board network driver that used to forward ARP requests with a greater
size than required. The ARP replies of the router re-used this size and
confused other network nodes with that. In general, the NIC router should
rely on the data of incoming packets the least possible. Therefore, with this
commit, the router creates a new ARP reply from scratch and uses only those
values required from the corresponding ARP request.
Fixes#4235
The former declaration of the IPv4 packet did not only use the questionable
tool of implementation-defined C++ bitsets but also lacked access to flags
"don't fragment" (DF) and "more fragments" (MF). This commit replaces the
C++ bitsets by using the register framework and introduces accessors for the
missing flags.
Ref #4236
This commit introduces a C-API to the Uplink session, as well as to
serve as a Block service. It can be used by drivers ported from
C-only projects, like the Linux kernel, or BSD kernels for instance.
Fix#4226
The re-newed approach currently supports ARM 64-bit only.
It depends on the Platform API of the ARM architecture.
It tries to meet the original semantic of the Linux kernel
functions as far as possible. To achieve this, device drivers
using this library should reference the original Linux kernel
headers at foremost. Only the headers in `src/include/lx_emul/shadow`
have to shadow clone the original ones.
Fix#4225
skb_push() already increases the skb->len by ETH_HLEN, hence adding
ETH_HLEN to the packet_size is redundant.
A too large packet size becomes a problem for large MTUs. With a maximum
MTU of 1500, adding ETH_HLEN twice will lead to a packet size of 1528.
Since this is larger than what we expect for good-old Ethernet (max. 1522),
some clients (e.g. the e1000 model in vbox5) may drop these packets.
Fixesgenodelabs/genode#4228
I discovered thinkbroadband.com requires the User-Agent header field and
rejects requests missing it with HTTP response code 403 "access to the
requested resource is forbidden". Now, fetchurl always adds the
User-Agent header fetchurl/LIBCURL_VERSION.
Also the error message now contains the HTTP response code.
The symlink implementation wrongly constructed a 'Sync' object within
the context of a monitor call. The 'Sync' constructor indirectly
depended on libc I/O for obtaining the current time, ultimately
resulting in a nested attempt of a monitor call. This could be
reproduced via the base.run script:
$ cd /home
$ ln -s a b
The 'ln' command resulted in the following log message:
[init -> /bin/bash -> 7] Error: deadlock ahead, mutex=0x10ff8c70, return ip=0x500583a7
The patch fixes the problem by splitting the single monitor call into
two monitor calls and moving the construction of the 'Sync' object
in-between both monitor calls, thereby executing the constructor at the
libc application level.
Fixes#4219
Building the elfloader in kernel-sel4.inc has a problem with Genodes CCACHE
make variable. When issuing ...
! ./tool/depot/create mstein/bin/*/base-sel4-* CCACHE=yes
..., building the elfloader used to consume all memory of the host system and
then run into a segmentation fault:
! make[6]: *** [elfloader/elfloader.o] Segmentation fault (core dumped)
This is because the other build system invokes the CCACHE variable as a command
in front of the compiler command. If CCACHE is set to 'yes', the 'yes' command
is called and produces an endless output into some output file. The problem
can be fixed by locally re-setting the CCACHE variable for the
'make ... elfloader' command to 'ccache' (Genode CCACHE==yes) or '' (Genode
CCACHE!=yes).
Fixes#4212
Adds try-catch-statement with diagnostic errors in Dhcp_server::free_ip in
order to guard against exceptions from the underlying bit allocator. These
exceptions should never happen given that the router is programmed correctly
and always feeds Dhcp_server::free_ip with sane arguments (which it should).
However, should this not be the case, we can assume that the failed IP freeing
indicates that the IP isn't allocated anyway and it's fine to continue using
the router. Furthermore, IP allocations are a mere client service and not
relevant for the integrity or safety of the router.
Ref #4200
When Interface::handle_config_3 (third step of applying a new configuration to
interfaces) tried to detach the interface from the current IP config because
the old and new IP config differed, it did so using the new domain. The former
steps of the reconfiguration already installed the new domain reference at the
interface. Therefore, also the DHCP server of the new domain was used. This,
however caused uncaught exceptions because detaching from an IP config
includes dissolving all DHCP allocations. This dissolving of DHCP allocations
now operated on a DHCP server (the one of the new domain) that wasn't related
to the allocations and, in the worst case, caused an uncaught exception
because the IPs were out of its range.
That said, this commit ensures that detaching an interface from an IP config
is always done on the domain from which the IP config originated. Normally,
this is the domain the interface is attached to. But in the case of
Interface::handle_config_3, it is another - the former domain the interface
was attached to.
The commit also adapts the nic_router_dhcp_* tests in a way that they
reconfigure the router in a way that would trigger the uncaught exception
without the fix.
Fixes#4200
Introduce two new cache maintainance functions:
* cache_clean_invalidate_data
* cache_invalidate_data
used to flush or invalidate data-cache lines.
Both functions are typically empty, accept for the ARM architecture.
The commit provides implementations for the base-hw kernel, and Fiasco.OC.
Fixes#4207
The implementation conflicted with the implicit declaration of bzero:
.../repos/dde_bsd/src/lib/audio/mem.cc: In function ‘void bzero(void*, size_t)’:
.../repos/dde_bsd/src/lib/audio/mem.cc:377:2: warning: ‘nonnull’ argument ‘b’ compared to NULL [-Wnonnull-compare]
Adapts Dir_file_system::open_composite_dirs in a way that it returns "success"
when the leaf node of the path is an empty directory but "lookup failed", as
usual, if one of the other directories on the way to the leaf node is empty.
I couldn't find a technical reason why we used to return "lookup failed" when
only the leaf node was empty.
The commit also adds a test for en empty root directory and empty
sub-directories to the fs_query run script.
Fixes#4198
The fs_query component used to exit with an uncaught exception if a queried
directory didn't exist. Now, fs_query will catch this event and simply skip the
affected query, thereby indicating to the user the inexistence of the
queried directory.
Ref #4032
- Patch the XHCI model in order to handle frame wrapping correctly. For
this adjust 'mfindex_kick' to the correct period (same, before, or after
'mfindex').
- Flush EP when it is stopped, this causes all pending packets for the EP
to be acked. Correct counting of packets in flight.
- Add BEI patch by Josef.
issue #4196
- API packages for: libusb, libuvc, and libyuv
- Source packages for: API packages + USB webcam app
- Meta package for USB webcam
- Raw package for USB webcam configuration
issue #4196
Unfortunately, our current implementation of 'wmb()' doesn't seem to do what we
want it to do. On base-hw + imx6q_sabrelite, the write of bdp->cbd_sc seems to
get re-ordered after the write to txq->bd.reg_desc_active in the transmission
path of the contrib code. Due to this, the transmission of the packet is only
triggered the next time a packet is sent. However, we only quick-fix it by
enforcing the execution of the write with a volatile global read as we will
soon update the FEC NIC port with a new DDE approach anyway.
Fixes#4010
In ROM mode the global CapsLock state is controlled by the capslock ROM
by virtual KEY_CAPSLOCK events.
Guests are easily confused by spurious KEY_CAPSLOCK input events in
caps="rom" mode. These spurious events may reach the VMM if KEY_CAPSLOCK
is not pressed as first key in a combination and, therefore, is not
filtered as global key. We filter KEY_CAPSLOCK in ROM mode in the VMM
explicitly, but let it pass in non-ROM mode.
Per default RAW mode is used and CapsLock key events are sent unfiltered
to the guest.
Enable watching files via the inotify interface of the Linux Kernel.
Delivery of watches to components is staggered in order to prevent an
overflow of the ACK queue in cases when a lot of changes are made to the
file system from the Linux side.
Fixes#4070
Guests are easily confused by spurious KEY_CAPSLOCK input events in
caps="rom" mode. These spurious events may reach the VMM if KEY_CAPSLOCK
is not pressed as first key in a combination and, therefore, is not
filtered as global key. Now, we filter KEY_CAPSLOCK in ROM mode in the
VMM explicitly, but let it pass in non-ROM mode.
Fixes#4087
Because qemu-usb allocated host devices after 'USB_HOST_DEVICE' in the
object array and 'USB_WEBCAM' is loacated after 'USB_HOST_DEVICE' the
webcam model can overwrite an already allocated pass-through device. As
a solution add the 'USB_FIRST_FREE' to make it clear from where host
devices can be allocated. Also increase the number of supported host
devices to eight.
fixes#4182
If no window has ever been focused, next() always returns an invalid
window id. As a consequence, there is no way to cycle through the focus
history without an explicit focus event (e.g. mouse hover).
Instead, next() should return the first window from the focus history if the
currently focused window is not present.
Fixesgenodelabs/genode#4164
The wpa_supplicant refuses to set the BSSID in case it is quoted.
Removing the quotes allows for specifying the BSSID in the
configuration.
Fixes#4175.
A reset domain can consist of one or several reset-pins
denoted by name that are assigned to a device.
When the device gets acquired via the Platform RPC API,
the pins are de-asserted, and asserted again when the
device gets released.
A configuration looks like the following:
<device name="mipi_dsi>
<reset-domain name="mipi_dsi_pclk"/>
...
</device>
Fixes#4171
Introduces the notion of a transaction that consists of one or more
messages. Whereby a message has a read or write direction and consists
of one or more bytes.
Issue #4170Fixes#4169
Report via platform_info the capabilities of the kernel, e.g. ACPI and MSI.
With the commit the try-catch pattern on IRQ session creation by the platform
driver is avoided.
Issue #4016
- Do not perform desctruction on report updatea in EP because
'unregister_device' may block on Led state 'update' (synchronous
control message) leading to the driver being stuck because no more
signals are received
- Check if device is present in 'submit_urb' calls
fixes#4166
- Signal device ready depending on state (ready or not) immediately or
when "actconfig" is set
- Report new devices when ready
- Drain packet stream in case there is no device present (needed for
synchronous operations at client side)
- Do not use 'session_device' on device destruction, check pointer
directly instead
issue #4149
Adds the <new-file> operation to the fs_tool. When configured, the
<new-file path="...">...</new-file> tag will cause creation or overwriting of
the file given through the 'path' attribute. The file will contain the text
content of the tag.
Ref #4032
This patch moves the utility from the app/text_area to os/vfs.h to make
it easier to use by other components. By hosting the 'New_file' as a
friend alongside the 'Directory', we can now pass a 'Directory' as
constructor argument, which is consistent with other utilities such as
'File_content'.
As a further improvement, the new version supports the implicit creation
of the directory hierarchy leading to the new file.
Issue #4032
Mapping normal memory bufferable restores support for unaligned reads on
DMA memory and prevents the following errors on imx6q_sabrelite.
KERNEL0: alignment error at 18003061 (PC: 0102e3f8, SP: 401ffb18, FSR: 90000001, PSR: 20000110)
Issue #4094
Issue #4157
By adding an attribute 'size="yes"' to a query, one instructs fs_query to
report also the size of each queried file as attribute 'size' of the
corresponding 'file' node.
Ref #4032
The fs_query component used to try watching all files it found resulting in
errors on files that are not watchable. For some files, however, the watch-
feature doesn't make sense as they are not readable (no content, no size).
Now, fs_query will check first whether a file is readable and skip watching
if it isn't.
Ref #4032
When configuring fs_query to print the content of files it used to try so for
all files it found resulting in errors on files that are not readable. Now,
fs_query will check first whether a file is readable and skip printing the
content of those that are not.
Ref #4032
Managing ssh event file descriptors was performed from two different
threads which could cause reallocation of structure used in other thread
in a call to 'poll' function.
Splitted initialization to parts and moved ssh event part into ssh loop.
Issue #4095
Moved creating ssh loop thread after initialization of wake up server
file descriptors to make sure that they will be properly handled even in
first loop run.
Issue #4095
After update of stdcxx, either hardware (CPU) random sources are taken
or, if not available/insufficient, /dev/urandom is used.
Issue #3967
Issue #4094
For fs_file_systems, reads are limited to the size of the packets from the
File_system session. Hence, we cannot read the large files in one go.
This fix is particularly helpful for fonts_fs, as it enables including font
files from a File_system.
genodelabs/genode#4135
Comment in Linux sources:
Since an ethernet header is 14 bytes network drivers often end up with
the IP header at an unaligned offset. The IP header can be aligned by
shifting the start of the packet by 2 bytes. Drivers should do this
with:
skb_reserve(skb, NET_IP_ALIGN);
This is ensured when using netdev_alloc_skb_ip_align().
Issue #4094
This patch takes advantage of block transfer interrupts on Intel XHCI
controllers which is used during isochronous transfers. Because of a bug
in hardware (see usb_host_isoc_bei.patch header), this feature has been
disabled for Intel leading to up to 8000 interrupts/s for isochronous
transfer causing severe CPU consumption on Genode. With this commit we
lower host driver consumption to normal levels.
issue #4149
A Lx::Task is now associated to a USB device not the session any more.
This implies that a task lives as long as the device making it possible
to gracefully handle outstanding requests (i.e., synchronous) in case
the session has been closed.
issue #4149
The old port version contained '*.ali' files that were build with an older GCC
which led to problems when compiling packages that use the port with the new
GCC 10. The '*.ali' files of the new port version were generated with GCC 10.
Fixes#4145
When loading shared libraries via the 'Shared_object' interface display
all additionaly loaded libraries in case 'ld_verbose' is configured. Up
until now, only the loaded library was displayed. In order to determine
if a dependend library had arlready been loaded prior to loading the
'Shared_object' the reference counter is used.
fixes#4147
The default size is on most kernels 512M. On OKL4 we have to use 800M,
because of the statically configured memory ranges in the OKL4 kernel.
By avoiding a specific amount of memory, the default Qemu memory sizes are
used.
Issue #4095
Revert GNU ld to the old behavior where sections with the same name in multiple
ld scripts are merged. Binutils 2.36.1 creates two sections with the same name.
Fixes#4126
Download gmp, mpc and mpfr with the download script provided by the
gcc source tree and let the gcc build system handle the build of these
libraries with the correct compile options. This fixes build issues on
armhf Linux and removes the need to maintain mpc and mpfr ports in
the Genode tree.
Issue #4094
This patch fixes a GCC-10 compile error. Even though the optimization
was quite effective - I measured a speedup of factor 2 - it is not all
that important for the overall application performance. In the nano3d
case, we are talking about 1 vs. 2 percent of CPU time.
Fixes#4140
The kernel-agnostic 'Trace::timestamp' function for arm_64 executes the
'mrs %0, pmccntr_el0' instruction, which is not permitted for user-level
programs on Linux. This patch shadows the generic timestamp.h header
with dummy that returns zero. This return value prompts the timeout
framework to disable the interpolation of time based on timestamps. This
avoid the illegal-instruction abort but comes with two llimitations:
First, time measurements are effectlively limited to a granulariry of 1
millisecond (deliberately constrained by the timer driver).
The quirk is applied when using the base-linux API. Should a generic
application (that uses the base API only) call 'Trace::timestamp'
directly, the illegal instruction is executed.
Issue #4136
This patch adds support for running Genode/Linux on the AARCH64
architecture.
- The kernel-agnostic startup code (crt0) had to be extended to
capture the initial stack pointer, which the Linux kernel uses
to pass the process environment. This is in line with the
existing startup code for x86_32 and x86_64.
- The link order of the host libraries linked to lx_hybrid
programs had to be adjusted such that libgcc appears at last
because the other libraries depend on symbols provided by
libgcc.
- When using AARCH64 Linux as host, one can execute run scripts
via 'make run/<script> KERNEL=linux BOARD=linux' now.
Issue #4136
When a DHCP packet is printed out, it first tries to determine the most
specific message type from the DHCP options and print its human-readable name
right after the protocol name. If finding the message type fails, the less
specific opcode is printed instead, but also in a human-readable way.
Fixes#4131
By moving core's build-description to a library - a pattern already
employed for the other base platforms - we become able to cleanly split
x86-specific code (I/O-port access) from generic code. This is a
prerequisite for enabling non-x86 architectures such as AARCH64.
Issue #4136
This new runscript demonstrates how a file can be overwritten by vfs
import with the flag overwrite set to false. This is due to a bug
in lx_fs that is not propagating an ernno EEXIST syscall error.
Issue genodelabs#4104
This commit introduces a fix for lx_fs to propagate errno EEXIST error.
This prevents vfs <import overwrite="false"> to overwrite an imported
file, if it already exists, without the overwrite flag set to true.
Issue genodelabs#4104
The former implementation called 'TRACE_AND_STOP' which led to the
'usb_host_drv' to stop whenever such a function was called. Rather
than stopping return '0' and let the contrib code deal with this
situation.
Issue #4116.
This commit backports the Linux upstream commit (d4a6106) [*]
that introduces a check to prevent the sglist from being used
unconditionally.
[*] 'xhci: fix bounce buffer usage for non-sg list case'
Fixes#4116.
Unconditionally setting MAKEFLAGS to just 's' is not nice because other
flags cannot be passed through the run script. What the script desires
is to disable the automatically enabled '--print-directory' for sub-make
instances when calling tool/port/current by declaring
'--no-print-directory'.
Until now, Genode's Linux system call bindings were based on original
Unix system calls that were later superseded by more flexibile variants.
E.g., 'openat' is a modern version of 'open'. Even though Linux upholds
the compatiblity with the original versions for existing architectures
like x86, the legacy syscalls are absent for the recently added AARCH64
architecture. A good overview of the system calls accross the prominent
architectures can be found at
https://chromium.googlesource.com/chromiumos/docs/+/master/constants/syscalls.md
This patch updates Genode's syscall bindings to avoid legacy versions,
thereby easing the support for AARCH64. The used "modern" versions
were introduced back in Linux version 2 days. So we are fine to rely
on them.
The patch slightly changes the signature for lx_stat because this system
call is merely used to check for the existance of a file and its size.
The new name 'lx_stat_size' draws a closer connection to its use case.
That said, the stat syscall has not been updated to the modern statx
since statx is still a fairly recent addition.
Issue #4136
This patch simplifies the use of the clone system call for creating
processes and threads. Until now, the binding used an opaque pointer
argument to pass context information to the newly created process or
thread. However, upon close inspection, this is not a strict
requirement.
A newly created thread accesses its contextual information by
using its stack pointer as key. The pointer argument is not used.
The creation of processes is strictly serialized because the
intermediate stack used in-between clone and execve is a global
variable. Since we rely on the serialization anyway, we can pass the
context information of a new process via a global variable as well.
This change simplifies the syscall binding for the upcoming AARCH64
support, which would otherwise require us to deal with the notion
of TLS on Linux.
Issue #4136
With the update to GCC 10, the compiler stopped with an error when compiling
places where a MAC address is copied from outside into a packed object using
the Net::Netaddress::copy method (e.g. in
Net::Arp_packet::dst_mac(Mac_address)):
! error: writing 6 bytes into a region of size 4 [-Werror=stringop-overflow=]
While trying to find a clean solution for this error, I found posts on
gcc.gnu.org and github that stated that the size calculations that cause these
errors are incorrect. Indeed, I could verify that the actual size of the two
regions was static and exactly the same in places were the error occured.
Furthermore, I couldn't find a way of making it more clear to the compiler
that the sizes are the same. By accident, we found that using the address of
the first element of the array that forms the second region instead of the
array address itself, somehow circumvents the error.
Fixes#4109
With the update to GCC 10 the compiler used to warn when using the internet
checksum functions on packet classes (like in
Net::Ipv4_packet::update_checksum):
warning: converting a packed ‘Net::[PACKET_CLASS]’ pointer
(alignment 1) to a ‘const uint16_t’ {aka ‘const short
unsigned int’} pointer (alignment 2) may result in an
unaligned pointer value
Apparently, the 'packed' attribute normally used on packet classes sets the
alignment of the packet class to 1. However, for the purpose of the
internet-checksum functions, we can assume that the packet data has no
alignment. This is expressed by casting the packet-object pointer to a pointer
of the new packed helper struct 'Packed_uint16' that contains only a single
uint16_t member before handing it over to the checksum function (instead of
casting it to a uint16_t pointer).
Ref #4109
