This patch removes the exception formerly thrown by 'Cpu_thread::state'
and turns the 'Thread_state' structure into a plain compound type w/o a
constructor.
Issue #5245Fixes#5250
With libxml2 >= 2.13, the `-path` argument can no longer be used for
setting search paths for xsd files. Instead, we use an XML catalog to
replace genode:// URIs with absolute paths.
Fixes#5248
This patch replaces exceptions of the PD session RPC interface with
result types.
The change of the quota-transfer RPC functions required the adaptation
of base/quota_transfer.h and base/child.h.
The 'alloc_signal_source' method has been renamed to 'signal_source'
to avoid an exceedingly long name of the corresponding result type.
The Pd_session::map function takes a 'Virt_range' instead of basic-type
arguments.
The 'Signal_source_capability' alias for 'Capability<Signal_source>' has
been removed.
Issue #5245
This patch updates the signal API to avoid raw pointers, and
replaces the Context_already_in_use and Context_not_associated
exceptions by diagnostic messages.
Fixes#5247
The router used to ignore the value of the <report quota=".."/> attribute when
it came to determining whether an interface's report is empty or not.
Therefore, merely configuring <report quota="yes"/> didn't cause interfaces
(and their quota) to show up in the report. Instead, interface quota was
reported as side effect of <report stats="yes"/>. The commit fixes this
inconsistency with the README.
The only object that is dynamically allocated by a network interface and that
was not equipped with a self-destruct timeout was the ARP waiter. This commit
closes this gap by adding a timeout to each ARP waiter that is set to 10
seconds by default but can be configured via the new <config> attribute
'arp_request_timeout_sec'.
Ref #4729
RFCs recommend to keep TCP connections for a certain time even after they
finished a close handshake, AFAIK, in order to be able to recognize astray
packets when they arrive later. This seems overambitious especially when in
the context of the router where session quota is pretty limited. Therefore,
this commit drops this final timeout and drops closed connections immediately.
Ref #4729
The previous value of 60 seconds was never observed in real-time scenarios and
UDP, for instance always used a timeout of 30 seconds without causing issues.
Note that this applies only to TCP connections in a state other than
ESTABLISHED, i.e., while it is still safe to early-drop the connection.
Ref #4729
The TCP connection state "ESTABLISHED" (in the router "OPEN") is a privileged
one for peers because it lasts very long without any peer interaction (in the
NIC router it's only 10 minutes, but RFCs recommend not less than 2 hours and
4 minutes). Furthermore, TCP connections in this state are normally not
available for early-drop on resource exhaustion. This means that this state
binds resources to a connection potentially for a long time without the option
of regaining them under stress. Therefore, this state should be entered with
care.
Up to now, the router marked a TCP connection with this state as soon as it had
seen one matching packet in both directions, which is rather quick. However,
implementing a very precise tracking of the exact TCP states of both peers and
only marking the connection "ESTABLISHED" when both peers are "ESTABLISHED" is
a difficult task with lots of corner cases.
That said, this commit implements a compromise. The router now has two flags
for each peer of a TCP connection - FIN sent and FIN acked - and sets them
according to the observed TCP flags. The "ESTABLISHED" state is entered only
when FIN acked is set for both peers (without having observed an RST or FIN
flag meanwhile).
Ref #4729
The Reference and Const_reference utility were introduced in order to express
that something is a reference (no null value) but can be changed dynamically
(not possible with built-in C++ references). However, the idea of preventing
every possibility for null pointer faults, with which the router was built
initially, has not prevailed and using pointers instead of the utility saves
logic and makes the code more readable to other C++ developers.
Ref #4729
The deinitialization method of Domain used to rely on Domain::with_dhcp_server
in order to dissolve and destroy a present DHCP server. However, this method
skipped calling its functor argument also when there was a DHCP server but an
invalid one. This commt replaces the with_dhcp_server with a pointer null-check
in order to fix the leak.
Ref #4729
Re-implements an emergency freeing of resources on exhaustion of session quota.
In contrast to the past one, the new algorithm is executed directly where the
exhaustion occurs. Instead of interupting the packet handling and restart it
from the beginning after the freeing action, packet handling is now continued
at the point of exhaustion (if enough resources could be freed). Furthermore,
the new algorithm frees only 100 objects (instead of 1024) at a max as we found
this to better match real-life observations. And finally, the router now drops
ICMP first, then UDP, then TCP - as this better reflects priorities - and
refrains from dropping TCP connections in the ESTABLISHED state. If the router
cannot free a sufficient amount of resources, the packet that caused the
exhaustion is dropped with a warning (verbose_packet_drop="yes").
Ref #4729
Remove the use of C++ exception as much as possible from the router as C++
exception handling can be resource intensive and can make code hard to
understand.
This also removes the garbage collection that the router used to do when a
session ran out of quota. This is motivated by the fact that the garbage
collection was rather simple and removed connection states regardless of their
current state, thereby causing broken connections. The change is part of this
commit as the approach to integrating garbage collection relied strongly on
exception handling.
The user story behind removing garbage collection: The router emergency-dropped
an established TCP connection (with NAPT) and on the next matching packet
re-created it with a different NAPT port, thereby breaking the connection. With
this commit, existing connections are prioritized over new ones during resource
exhaustion and the packets that attempt to create a new connection in such a
state are dropped with a warning in the log (verbose_packet_drop="yes").
Note that the state resolves itself with time as existing connections time out
or are closed by peers.
Ref #4729
Reserved memory regions must be excluded from the corresponding DMA
allocators irrespective of whether the device is in use. Otherwise, an
early allocation of DMA buffers may use the reserved memory regions of a
late acquired device.
Fixes#5232
This exception got introduced as a mere convenience for implementers of
'Child_policy' but required a special case in the base library.
Following the goal of eliminating exceptions from the base system,
this patch removes it by making a server_id_space mandatory.
Issue #5245
as setup by firmware after boot. The information will/can be used by the
platform driver to re-program bridges after a system suspend/resume cycle.
Issue #5241
- Replace 'typedef' by 'using'
- Avoid plain pointers
- Import Genode namespace into Gui::
- Use enum class
- Use Attr struct for passing multiple attributes
- Turn testnit into proper Genode::Component
- Use distinct types for top-level and child views
- Remove dependency from timer
- Use util/geometry.h
- Move header to base/include to make it applicable for base types
like 'Affinity' down the road.
- Represent 'Rect' as typle of point and area, which is the most
common form of initialization, creates in valid 'Rect' by default.
- Turn Point, Area, and Rect into compound types, making x, y, w, h, at,
area accessible without a method call
- 'Rect::Compound' function for constructing a 'Rect' from two points,
replacing a former constructor
- Use result type 'Rect::Cut_remainder' instead of out parameters.
Fixes#5239
This patch turns 'Color' from a class to a POD type by replacing
the constructors by the named create functions 'rgb', 'clamped_rgb',
and 'clamped_rgba'. It thereby enables the initialization of Color
values using { .r = ... } syntax and makes the type usable in const
expressions.
It also narrows the type for color components and alpha values to
uint8_t. So possible integer overflows of computed values are detected
by -Wconversion.
As 'Color::rgb(0, 0, 0)' is repeatedly used as a default value, the
patch adds the 'Color::black()' function.
Fixes#5238
This enables the combination of the nic_uplink component with any driver
pkg featuring a runtime file. This is already the case of the pc_nic
driver.
This is a preparatory step for issue #4420.
When having a maximized terminal window, a suspend was causing an
invalid mode change at nitpicker. This triggered a huge resource request
in nitpicker because the RAM-quota check was rendered ineffective by a
wrap-around during unsigned multiplication.
Issue genodelabs/genode#5180Fixesgenodelabs/genode#5201
The test reverts the platform drivers' config at the end of the test
to an empty state. However, this state should still contain a default
policy (analogyously to the initial state). Otherwise, the platform
session of the test program will (sometimes) become invalid just before
successfully finishing the test.
The original use cases of the loader have long been covered by the
dynamic init. The only substantial client of the loader remained to be
the qpluginwidget. However, the qpluginwidget was supported only by the
Arora web browser. But the blending of plugins with websites ultimately
remained a tech demo, and Arora has been replaced by Falkon.
Fixes#5229
Default disabled initialization prevents follow-up errors if one
capability is already enabled on boot, but platform_drv decides to
enable the other one. The PCI spec explicitly states that "Behavior is
undefined if both MSI and MSI-X are enabled simultaneously".
Fixes#5228
- no need to explicitly switch off vga anymore
- use vPID for VMs which improves TLB usage if multiple vCPUs on same
pCPU is used, which happens to happen on Sculpt.
- support for mwait by nova kernel, which is off by default
Issue #5206
During resume the waiting for Cmd::St takes ~2s on a T460p with Intel
AHCI SSD attached. According to the Serial ATA AHCI Spec. wakeup can take
seconds, e.g. chapter 8.2 Power State Mappings of the Serial ATA AHCI spec
(1.3.1).
Issue #5203
Restore the reporting in situations where all capture sessions are gone.
This fixes the webcam package that disables the USB webcam driver when
nitpicker report no active displays.
Issue #5187
This patch retains the buffer size of the last capture client as mode as
long as no capture client exists. This avoids intermediate mode changes
in situations like suspend/resume where the display driver is restarted.
Issue #5187
This patch disables latency warnings by default. The warnings can be
enabled by setting the 'warning_rate_ms` value to the desired
maximum rate.
Fixes#5186
Issue #5174
on display client close (intel_fb). The former code constructed a
temporary object on the stack, which sets up the scratch pages for the
closed client. However, the scratch page backing store (dma_buffer) gets
freed on destruction of the temporary stack object, which leads to DMA faults
with visual noise on the screen. Instead, use the already in use ggtt object
and add the scratch pages explicitly.
Issue #5180
Instead of returning an invalid capability whenever an interface is
requested that does not exist, create a disconnected interface component.
It is also possible that a client requests an interface that got removed
at the same time. When an invalid capability gets returned, a client
can stumble about invoking it.
Moreover, this commit marks either invalid interface or device components
as disconnected objects to optimize their handling.
Ref genodelabs/genode#5021
When the "system" ROM state turns to "suspend",
the S3 state information of the sleep_states ROM are determined and
are used to invoke the privileged Pd::system_control call.
Issue #5180
Executing a clflush operation on MMIO memory freezes embedded
platforms such as the Celeron N3450 used on the ZimaBlade. Looking into
the current linux code confirms that clflush is only used for ppgtt
entries and not on MMIO memory.
Fixes#5176
Unlike the previous return value of
`Genode::Packet_allocator::need_size_for_free()` indicated, it does need
the size of the object it has to free to work properly.
Before, the current back-most window was not restacked if it was part of
the already, which lead to partially inconsistent view of the window
stack between decorator and nitpicker.
Due to a bug in the original implementation, the size of the MMIO
range covering the 'Request_sense_response' data was set too large
during the MMIO boundary change. This rendered devices that were not
yet ready and required an 'Request_sense' command unusable.
The commit also adapts all other commands where the MMIO size does
not match the expected one.
Fixes#5133.
The dynamic buffer allocation increases the RAM demand slightly beyond
1M on seL4. Use 2M, as is already the default in pkg/terminal_crosslink.
Issue #5135
Replace the USB session API by one that provides a devices ROM only,
which contains information about all USB devices available for this client,
as well as methods to acquire and release a single device.
The acquisition of an USB device returns the capability to a device session
that includes a packet stream buffer to communicate control transfers
in between the client and the USB host controller driver. Moreover,
additional methods to acquire and release an USB interface can be used.
The acquisition of an USB interface returns the capability to an interface
session that includes a packet stream buffer to communicate either
bulk, interrupt, or isochronous transfers in between the client and the
USB host controller driver.
This commit implements the API changes in behalf of the Genode C API's
USB server and client side. Addtionally, it provides Usb::Device,
Usb::Interface, and Usb::Endpoint utilities that can be used by native
C++ clients to use the new API and hide the sophisticated packet stream API.
The adaptations necessary target the following areas:
* lx_emul layer for USB host and client side
* Linux USB host controller driver port for PC
* Linux USB client ports: usb_hid_drv and usb_net_drv, additionally
reduce the Linux tasks used inside these drivers
* Native usb_block_drv
* black_hole component
* Port of libusb, including smartcard and usb_webcam driver depending on it
* Port of Qemu XHCI model library, including vbox5 & vbox6 depending on it
* Adapt all run-scripts and drivers_interactive recipes to work
with the new policy rules of the USB host controller driver
Fixgenodelabs/genode#5021
This patch modifies the mixer's time window allocation by modelling the
drift of the period length over time. This yields a much better
stability of the detected sample rates in the presence of jitter.
Issue #5132
- monitor system ROM changes
- stop processing of new Jobs before suspend
- destruct platform device before suspend, but keep platform DMA buffers
- re-construct platform device and reinit resources (mmio, irq) on resume
- re-start block job scheduling on resume
Fixes#5101
- monitor system ROM changes
- stop processing of new Jobs before suspend
- destruct platform device before suspend, but keep platform DMA buffers
- re-construct platform device and reinit resources (mmio, irq) on resume
- re-start block job scheduling on resume
Issue #5101
This commit is a preparation commit for suspend/resume. The commit
refactors the code in order to consolidate all Platform resources into one
instance. All users within the driver should access the resources with
with_* functions, which checks whether the device resource is usable. The
callers are not allowed to store any references to the provided resources.
Issue #5101
- monitor system ROM changes
- stop processing of new Jobs before suspend
- destruct platform device before suspend, but keep platform DMA buffers
- re-construct platform device and reinit resources (mmio, irq) on resume
- re-start GPU job scheduling on resume
Fixes#5081
- New session interfaces:
- os/include/play_session (for audio playing / mic-input driver)
- os/include/record_session (for audio recording / audio-output driver)
- Mixer at os/src/record_play_mixer providing both play and record services
- Simple waveform player at os/src/app/waveform_player
- Simple audio-signal capturing component at os/src/app/record_rom
- Simple oscilloscpe at gems/src/app/rom_osci (using record_rom)
- Simple test-audio_play for playing raw stereo f32 data
The _gems/run/waveform_player.run_ script illustrates the use of the new
components and interfaces.
Issue #5097
Check if controllers port count matches number of ports found in the
port implemented register. In case counts don't match print a diagnostic
message for debugging purposes.
issue #4081
The <transform> filter configurably transforms touch and absolute-motion event
coordinates by a sequence of translation (move), scaling, rotation, and flipping
primitives in sub-nodes.
Issue #5105
Per default, only key presses and releases are logged. The optional
'motion' attribute (boolean) enables logging of motion and touch events.
Issue #5105
The classes Genode::Mmio, Genode::Register_set, Genode::Attached_mmio, and
Platform::Device::Mmio now receive a template parameter 'size_t SIZE'. In each
type that derives from one of these classes, it is now statically checked that
the range of each Genode::Register::Register- and
Genode::Register_set::Register_array-deriving sub-type is within [0..SIZE).
That said, SIZE is the minimum size of the memory region provided to the above
mentioned Mmio classes in order to avoid page faults or memory corruption when
accessing the registers and register arrays declared inside.
Note, that the range end of a register array is not the end of the last item
but the end of integer access that is used for accessing the last bit in the
last item.
The constructors of Genode::Mmio, Genode::Attached_mmio, and
Platform::Device::Mmio now receive an argument 'Byte_range_ptr range' that is
expected to be the range of the backing memory region. In each type that derives
from on of these classes, it is now dynamically checked that 'range.num_bytes
>= SIZE', thereby implementing the above mention protection against page faults
and memory corruption.
The rest of the commit adapts the code throughout the Genode Labs repositories
regarding the changes. Note that for that code inside Core, the commits mostly
uses a simplified approach by constructing MMIO objects with range
[base..base+SIZE) and not with a mapping- or specification-related range size.
This should be fixed in the future.
Furthermore, there are types that derive from an MMIO class but don't declare
any registers or register arrays (especially with Platform::Device::Mmio). In
this case SIZE is set to 0. This way, the parameters must be actively corrected
by someone who later wants to add registers or register arrays, plus the places
can be easily found by grep'ing for Mmio<0>.
Fix#4081
I2C EEPROMs of the type at24xxx are really slow (ca. 10 kHZ).
This adds the `bus_speed_khz` attribute to the config of the driver and
adapts the i.MX8 driver to support the feature.
Issue gapfruit#1996
Fixes genodelabs#5090
The former implementation relied on input drvdata always pointing to
struct hid_device, which is not true for Wacom touch devices (at least).
Now, we implement the input handler for devices providing LEDs
(evbit[EV_LED] set) only and use input_inject_event() to set the LED
states.
The commit is a preparation commit for suspend/resume. It prepares the GPU
structures relying on gmadr.cap() (MMIO) to be re-constructible by applying
the with* pattern to context, ring_buffer and ggtt mmio map. It removes
the managed dataspace handling of gmadr subsets to make the with_* pattern
possible.
Issue #5081
This commit is a preparation commit for suspend/resume. The commit
refactors the code in order to consolidate all Platform resources into one
instance. All users within the GPU driver should access the resources with
with_* functions, which checks whether the device resource is usable. The
callers are not allowed to store any references to the provided resources.
With this change, it will be possible in follow up commits, to release
the platform device and to re-acquire it and its resources, e.g. mmio, irq,
gmadr.
Issue #5081
The axis IDs correspond to 2x analog sticks with 2 axes and 2x triggers.
While being at it, the commit changes the Axis_id type to Axis::Id.
Fixes#3669
The frame-pointer-based backtrace does not work without enabling
-fno-omit-frame-pointer explicitly and in most cases leads to page
faults because non-pointer stack values are dereferenced during the
walk. The best we can do is to limit the backtrace walk to the stack of
the current thread to prevent page faults unrelated to the system state
without the use of the backtrace utility.
This commit introduces a printable Backtrace class usable in
Genode::log(), Genode::trace(), etc. The class is based on the new
function for_each_return_address(auto const &fn) that walks the stack in
its limits and calls fn() for each discovered return address on the
stack in the new os/include/os/backtrace.h. Archtecture-specific
stack-pointer retrieval and walk loops are implemented in dedicated
os/include/spec/<arch>/os/for_each_return_address.h files. Also, the
well-known Genode::backtrace() function (which logs the return-address
values) is provided for backwards compatibility.
Fixes#5078
This patch changes the unlink operation of the ram fs to defer the
destruction of a file until it is no longer referenced by any VFS handle.
When unlinked, the file no longer appears in the directory. But it can
still be opened and accessed.
With this change, a parent process of a Unix-like subsystem becomes able
to pass the content of an unlinked file to a forked child process. This
mechanism is required when using the 'exec' command in Tcl scripts.
Another use case is the 'tmpfile()' function.
Fixes#3577
The traced top instance was configured to be active every two seconds
whereas the trace test uses a grace time of only 1.5 seconds before
raising the FOREIGN state of a trace subject as an error.
The state of a trace subject can change only whenever the traced thread
passes a trace point. Hence, with the original configuration, the
release of top as trace subject can take up to two seconds. The patch
reduces the rate to 0.5 seconds to satisfy the expectation of
test-trace.
According to RFC 1812 ICMP Destination unreachable (Network unreachable)
does not quite our case of clients directly behind the router.
If a packet is to be forwarded to a host on a network that is directly
connected to the router (i.e., the router is the last-hop router) and
the router has ascertained that there is no path to the destination
host then the router MUST generate a Destination Unreachable, Code 1
(Host Unreachable) ICMP message.
Issue #4729
The argument was originally designated to restrict the reach of the
trace monitor but the idea remained unimplemented. It is now superseded
by the use of the trace-session label as trace-subject filter.
Issue #847
This patch changes core's TRACE service to expose trace subjects only if
their PD label matches the label of the TRACE monitor. Hence, by default,
a trace monitor can only observe itself and its child components. Only
if the trace monitor's parent rewrites the trace-session's label, the
view of trace monitor can become broader. For example, when rewriting
the trace label to an empty string "", the trace monitor becomes able to
observe the sibling components hosted in the same init instance as the
trace monitor.
To grant a trace session the special privilege of obtaining a global
system view (including the kernel's trace subjects), the top-level init
has to rewrite the session's label to an empty string. At core, this
specific label "init -> " is handled as a special case that discharges
the filtering/namespacing of trace subjects.
Note that the trace-subject label as reported as subject info is now
given relative to the label of the trace session. As a nice side effect
of this change, the pkg/test-trace_logger works now when executed by the
depot_autopilot as well as via the test.run script.
Issue #847
In the scope of alloc_dma_buffer(), Out_of_* exceptions might be thrown
at different stages. By adding a Guard object, we make sure to rollback
already created objects accordingly.
genodelabs/genode#5002
As a consequence of the adding IOMMU support to the platform driver,
additional RAM and CAPs are needed for setting up IO page-table
structures.
genodelabs/genode#5002
By adding the `irq_type` argument, one can explicitly specify whether to
use LEGACY, MSI or MSI-X interrupts. We formerly used the
`device_phys_config` to implicitly select MSI, however, with the
addition of IOMMU support to the platform driver there is at least one
instance where we need an MSI for a non-PCI device.
Yet, by adding another session argument to the Irq session, we exceed
the character limit for session args. Since not all arguments are
relevant for LEGACY interrupts resp. MSI, we can split the Irq_connection
constructor to handle the two cases separately and omit unneeded
arguments.
genodelabs/genode#5002
DMA buffer allocations are always performed as full pages. However, they
got mapped into the IOMMU domain using the requested size, which may not
be a multiple of the page size. This behaviour was introduced as a regression
by #4761 and is corrected by this commit.
genodelabs/genode#5002
The virtual add_range()-method must not be called from the base-class
constructor since the derived class is not be fully initialized at
this point.
genodelabs/genode#5002
