ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
06cdc07f8c
openwrt/target/linux/ath79/dts
History
Marco von Rosenberg 06cdc07f8c ath79: add support for Huawei AP5030DN 
Huawei AP5030DN is a dual-band, dual-radio 802.11ac Wave 1 3x3 MIMO
enterprise access point with two Gigabit Ethernet ports and PoE
support.

Hardware highlights:
- CPU: QCA9550 SoC at 720MHz
- RAM: 256MB DDR2
- Flash: 32MB SPI-NOR
- Wi-Fi 2.4GHz: QCA9550-internal radio
- Wi-Fi 5GHz: QCA9880 PCIe WLAN SoC
- Ethernet 1: 10/100/1000 Mbps Ethernet through Broadcom B50612E PHY
- Ethernet 2: 10/100/1000 Mbps Ethernet through Marvell 88E1510 PHY
- PoE: input through Ethernet 1 port
- Standalone 12V/2A power input
- Serial console externally available through RJ45 port
- External watchdog: SGM706 (1.6s timeout)

Serial console:
  9600n8 (9600 baud, no stop bits, no parity, 8 data bits)

MAC addresses:
  Each device has 32 consecutive MAC addresses allocated by
  the vendor, which don't overlap between devices.
  This was confirmed with multiple devices with consecutive
  serial numbers.
  The MAC address range starts with the address on the label.
  To be able to distinguish between the interfaces,
  the following MAC address scheme is used:
    - eth0 = label MAC
    - eth1 = label MAC + 1
    - radio0 (Wi-Fi 5GHz) = label MAC + 2
    - radio1 (Wi-Fi 2.4GHz) = label MAC + 3

Installation:
0. Connect some sort of RJ45-to-USB adapter to "Console" port of the AP

1. Power up the AP

2. At prompt "Press f or F  to stop Auto-Boot in 3 seconds",
   do what they say.
   Log in with default admin password "admin@huawei.com".

3. Boot the OpenWrt initramfs from TFTP using the hidden script
   "run ramboot". Replace IP address as needed:

   > setenv serverip 192.168.1.10
   > setenv ipaddr 192.168.1.1
   > setenv rambootfile
     openwrt-ath79-generic-huawei_ap5030dn-initramfs-kernel.bin
   > saveenv
   > run ramboot

4. Optional but recommended as the factory firmware cannot
   be downloaded publicly:
   Back up contents of "firmware" partition using the web interface or ssh:

   $ ssh root@192.168.1.1 cat /dev/mtd11 > huawei_ap5030dn_fw_backup.bin

5. Run sysupgrade using sysupgrade image. OpenWrt
   shall boot from flash afterwards.

Return to factory firmware (using firmware upgrade package downloaded from
non-public Huawei website):
1. Start a TFTP server in the directory where
   the firmware upgrade package is located

2. Boot to u-boot as described above

3. Install firmware upgrade package and format the config partitions:

   > update system FatAP5X30XN_SOMEVERSION.bin
   > format_fs

Return to factory firmware (from previously created backup):
1. Copy over the firmware partition backup to /tmp,
   for example using scp

2. Use sysupgrade with force to restore the backup:
   sysupgrade -F huawei_ap5030dn_fw_backup.bin

3. Boot AP to U-Boot as described above

Quirks and known issues
-----------------------

- On initial power-up, the Huawei-modified bootloader suspends both
ethernet PHYs (it sets the "Power Down" bit in the MII control
register). Unfortunately, at the time of the initial port, the kernel
driver for the B50612E/BCM54612E PHY behind eth0 doesn't have a resume
callback defined which would clear this bit. This makes the PHY unusable
since it remains suspended forever. This is why the backported kernel
patches in this commit are required which add this callback and for
completeness also a suspend callback.

- The stock firmware has a semi dual boot concept where the primary
kernel uses a squashfs as root partition and the secondary kernel uses
an initramfs. This dual boot concept is circumvented on purpose to gain
more flash space and since the stock firmware's flash layout isn't
compatible with mtdsplit.

- The external watchdog's timeout of 1.6s is very hard to satisfy
during bootup. This is why the GPIO15 pin connected to the watchdog input
is configured directly in the LZMA loader to output the CPU_CLK/4 signal
which keeps the watchdog happy until the wdt-gpio kernel driver takes
over. Because it would also take too long to read the whole kernel image
from flash, the uImage header only includes the loader which then reads
the kernel image from flash after GPIO15 is configured.

Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
[fixed 6.6 backport patch naming]
Signed-off-by: David Bauer <mail@david-bauer.net>
2024-03-31 18:09:43 +02:00
..
ar724x_senao_loader-4k.dtsi ath79: add Senao 'failsafe' sysupgrade procedure 2021-04-08 09:20:59 +02:00
ar724x_senao_loader-64k.dtsi ath79: add Senao 'failsafe' sysupgrade procedure 2021-04-08 09:20:59 +02:00
ar724x_ubnt_xm_outdoor.dtsi ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
ar724x_ubnt_xm.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar724x.dtsi ath79: rename pcie-controller to pcie 2024-01-05 16:17:57 +01:00
ar934x_ruckus_zf73xx.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar934x_senao_loader.dtsi ath79: add Senao 'failsafe' sysupgrade procedure 2021-04-08 09:20:59 +02:00
ar934x.dtsi ath79: fix avoid_unnecessary_addr_size warnings 2024-01-05 16:17:57 +01:00
ar1022_iodata_wn-ag300dgr.dts ath79: enable UART in SoC DTSI files 2021-02-24 02:53:53 +01:00
ar1022_sitecom_wlr-7100.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7100_mikrotik_routerboard-4xx.dtsi ath79: cleanup mikrotik routerboot partitions 2022-04-15 07:11:18 +02:00
ar7100.dtsi ath79: rename pcie-controller to pcie 2024-01-05 16:17:57 +01:00
ar7161_adtran_bsap1800-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_adtran_bsap1840.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_adtran_bsap1880.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_aruba_ap-105.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_aruba_ap-175.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_buffalo_wzr-600dhp.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_buffalo_wzr-hp-ag300h.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_buffalo_wzr-hp-ag300h.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_dlink_dir-825-b1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_fortinet_fap-220-b.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_jjplus_ja76pf2.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_meraki_mr16.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_mikrotik_routerboard-493g.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_netgear_wndap360.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_netgear_wndr3700-v2.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_netgear_wndr3700.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_netgear_wndr3800.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_netgear_wndr3800ch.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_netgear_wndr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_netgear_wndrmac-v1.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_netgear_wndrmac-v2.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_ruckus_gd11.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_ruckus_zf734x.dtsi ath79: support Ruckus ZoneFlex 7341/7343/7363 2023-03-22 22:25:08 +01:00
ar7161_ruckus_zf7341.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_ruckus_zf7351.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_ruckus_zf7363.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7161_siemens_ws-ap3610.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_trendnet_tew-673gru.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7161_ubnt_routerstation-pro.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_ubnt_routerstation.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7161_ubnt_routerstation.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar7240_buffalo_whr-g301n.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_dlink_dir-615-e4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_engenius_enh202-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_netgear_wnr612-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_netgear_wnr1000-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_on_n150r.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_openmesh_om2p-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_ruckus_zf7025.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_tplink_tl-wa701nd-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wa730re-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wa801nd-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wa830re-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wa901nd-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wa.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_tplink_tl-wr740n-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr740n-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr741-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr841-v5.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr941-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240_tplink_tl-wr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_tplink.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7240_ubnt_bullet-m-ar7240.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7240.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar7241_netgear_wnr2000-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_netgear_wnr2200-8m.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar7241_netgear_wnr2200-16m.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar7241_netgear_wnr2200.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_tplink_tl-mr3x20.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar7241_tplink_tl-mr3220-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_tplink_tl-mr3420-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_tplink_tl-wr841-v7.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_tplink_tl-wr842n-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_tplink.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar7241_ubnt_airrouter.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7241_ubnt_bullet-m-ar7241.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_nanobridge-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_nanostation-loco-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_nanostation-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_picostation-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_powerbridge-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_rocket-m.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar7241_ubnt_unifi-ap-lr.dts ath79: add variant UniFi AP LR 2022-08-06 20:15:30 +02:00
ar7241_ubnt_unifi-ap-outdoor-plus.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7241_ubnt_unifi-ap.dts ath79: rename references of UniFi to UniFi AP 2022-08-06 20:15:30 +02:00
ar7241_ubnt_unifi-ap.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7241_ubnt_unifi.dtsi ath79: convert WiFis based on ar7241_ubnt_unifi.dtsi to nvmem-cells 2022-12-17 20:48:57 +01:00
ar7241.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar7242_avm_fritz300e.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_buffalo_bhr-4grv.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7242_buffalo_wzr-bhr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7242_engenius_eap350-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_engenius_ecb350-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_meraki_mr12.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_tplink_tl-wr2543-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar7242_ubnt_edgeswitch-5xp.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7242_ubnt_edgeswitch-8xp.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7242_ubnt_sw.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar7242.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar9132_buffalo_wzr-hp-g300nh-rb.dts ath79: Add support for Buffalo WZR-HP-G300NH 2021-03-22 09:23:10 +01:00
ar9132_buffalo_wzr-hp-g300nh-s.dts ath79: Add support for Buffalo WZR-HP-G300NH 2021-03-22 09:23:10 +01:00
ar9132_buffalo_wzr-hp-g300nh.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9132_tplink_tl-wa901nd-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9132_tplink_tl-wr941-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9132.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar9330_dlink_dir-505.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9330_glinet_gl-ar150.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9330_openmesh_om2p-lc.dts ath79: Add support for OpenMesh OM2P-LC 2020-12-30 23:32:07 +01:00
ar9330_openmesh_om2p-v2.dts ath79: Add support for OpenMesh OM2P v2 2020-12-30 23:32:07 +01:00
ar9330_openmesh_om2p.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9330_pqi_air-pen.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9330_ziking_cpe46b.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9330.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
ar9331_8dev_carambola2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_alfa-network_ap121f.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
ar9331_alfa-network_ap121f.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_alfa-network_ap121fe.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
ar9331_arduino_yun.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_embeddedwireless_dorin.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_etactica_eg200.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_glinet_64xx.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_glinet_6408.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9331_glinet_6416.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9331_glinet_gl-mifi.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_glinet_gl-usb150.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_hak5_lan-turtle.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
ar9331_hak5_lan-turtle.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9331_hak5_packet-squirrel.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
ar9331_hak5_wifi-pineapple-nano.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9331_hiwifi_hc6361.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_onion_omega.dts ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
ar9331_pisen_ts-d084.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9331_pisen_wmm003n.dts ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
ar9331_teltonika_rut230-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_tplink_tl-mr10u.dts ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
ar9331_tplink_tl-mr3020-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_tplink_tl-mr3040-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9331_tplink_tl-wr703n.dts ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
ar9331_tplink_tl-wr710n-8m.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9331_tplink_tl-wr710n-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9331_tplink_tl-wr710n-v2.1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9331_tplink_tl-wr710n.dtsi ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
ar9331_tplink_tl-wr740n-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9331_tplink_tl-wr740n-v5.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9331.dtsi ath79: add missing clock name strings in SoC dtsi 2022-11-09 22:55:33 +01:00
ar9341_engenius_eap300-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_engenius_ens202ext-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_openmesh_om2p-hs-v1.dts ath79: add support for OpenMesh OM2P-HS v1 2020-12-29 00:03:26 +01:00
ar9341_openmesh_om2p-hs-v2.dts ath79: add support for OpenMesh OM2P-HS v2 2020-12-29 00:03:26 +01:00
ar9341_openmesh_om2p-hs-v3.dts ath79: add support for OpenMesh OM2P-HS v3 2020-12-29 00:03:26 +01:00
ar9341_openmesh_om2p-hs.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_pcs_cr3000.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_pisen_wmb001n.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9341_tplink_tl-mr3420-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_tplink_tl-wa850re-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_tplink_tl-wa860re-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_tplink_tl-wa901nd-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_tplink_tl-wa.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9341_tplink_tl-wr841-v8.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9341_tplink_tl-wr842n-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341_tplink_tl-wr941nd-v5.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9341_tplink.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9341.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
ar9342_iodata_etg3-r.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_mikrotik_routerboard-911g-xhpnd.dts ath79: support for MikroTik RouterBOARD 911G-(2,5)HPnD 2024-01-07 01:19:54 +01:00
ar9342_mikrotik_routerboard-911g.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_mikrotik_routerboard-912uag-2hpnd.dts ath79: support for MikroTik RouterBOARD 911G-(2,5)HPnD 2024-01-07 01:19:54 +01:00
ar9342_ruckus_zf7321.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_ubnt_aircube-ac.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9342_ubnt_bullet-ac.dts ath79: Add support for Ubiquiti Bullet AC 2021-01-15 18:32:38 +01:00
ar9342_ubnt_bullet-m-xw.dts ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic 2024-01-25 23:45:41 +01:00
ar9342_ubnt_lap-120.dts ath79: create DTSI files for ubnt WA 1-/2-port devices 2020-11-03 18:34:10 +01:00
ar9342_ubnt_litebeam-ac-gen2.dts ath79: remove redundant setup of wmac for ubnt WA devices 2020-11-03 18:34:10 +01:00
ar9342_ubnt_litebeam-m5-xw.dts ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_nanobeam-ac-gen2.dts ath79: Add support for Ubiquiti NanoBeam AC Gen2 2020-11-18 21:13:46 +01:00
ar9342_ubnt_nanobeam-ac.dts ath79: Add support for Ubiquiti NanoBeam AC Gen2 2020-11-18 21:13:46 +01:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: remove redundant setup of wmac for ubnt WA devices 2020-11-03 18:34:10 +01:00
ar9342_ubnt_nanostation-ac.dts ath79: remove redundant setup of wmac for ubnt WA devices 2020-11-03 18:34:10 +01:00
ar9342_ubnt_nanostation-loco-m-xw.dts ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_nanostation-m-xw.dts ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_powerbeam-5ac-gen2.dts ath79: create DTSI files for ubnt WA 1-/2-port devices 2020-11-03 18:34:10 +01:00
ar9342_ubnt_powerbeam-m2-xw.dts ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_powerbeam-m5-xw.dts ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_wa_1port.dtsi ath79: drop phy-mask property 2022-06-15 20:07:26 +02:00
ar9342_ubnt_wa_2port.dtsi ath79: drop phy-mask property 2022-06-15 20:07:26 +02:00
ar9342_ubnt_wa.dtsi ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
ar9342_ubnt_xw_rssileds.dtsi ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_ubnt_xw.dtsi ath79: generic: rework ar9342_ubnt_xw dtsi, and add support for Ubiquiti LiteBeam M5 (XW), Ubiquiti AirGrid M5 HP (XW), Ubiquiti PowerBeam M5 300 (XW) 2024-01-20 19:57:57 +01:00
ar9342_zyxel_nwa11xx.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9342_zyxel_nwa1100-nh.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_zyxel_nwa1121-ni.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_zyxel_nwa1123-ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9342_zyxel_nwa1123-ni.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_aerohive_hiveap-121.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_alfa-network_n5q.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_araknis_an-300-ap-i-n.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_atheros_db120.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_comfast_cf-e120a-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_compex_wpj344-16m.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_devolo_dlan_wifi.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_devolo_dlan-pro-1200plus-ac.dts ath79: add support for Devolo dLAN pro 1200+ WiFi ac 2021-06-06 18:56:45 +02:00
ar9344_devolo_magic-2-wifi.dts ath79: add support for Devolo dLAN pro 1200+ WiFi ac 2021-06-06 18:56:45 +02:00
ar9344_dlink_dir-8x5.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9344_dlink_dir-825-c1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_dlink_dir-835-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_embeddedwireless_balin.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
ar9344_engenius_eap600.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_engenius_ecb600.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_enterasys_ws-ap3705i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_fortinet_ap-dual.dtsi ath79: fix pci_device_reg errors 2024-01-05 16:17:58 +01:00
ar9344_fortinet_fap-221-b.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_mercury_mw4530r-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_mikrotik_routerboard-16m-nor.dtsi ath79: mikrotik: stack ar9344 devices to single dtsi 2023-02-26 22:22:48 +01:00
ar9344_mikrotik_routerboard-911-lite.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_mikrotik_routerboard-951g-2hnd.dts ath79: DTS improvement for buzzer on RB951G-2HnD 2023-07-01 15:51:26 +02:00
ar9344_mikrotik_routerboard-951ui-2hnd.dts ath79: mikrotik: extract common bits for RB951x-2HnD devices 2023-06-25 13:18:31 +02:00
ar9344_mikrotik_routerboard-951x-2hnd.dtsi ath79: mikrotik: extract common bits for RB951x-2HnD devices 2023-06-25 13:18:31 +02:00
ar9344_mikrotik_routerboard-lhg-5nd.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_mikrotik_routerboard-sxt-5nd-r2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_mikrotik_routerboard.dtsi ath79: mikrotik: stack ar9344 devices to single dtsi 2023-02-26 22:22:48 +01:00
ar9344_moxa_awk-1137c.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
ar9344_netgear_pgzng1.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9344_netgear_r6100.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_netgear_wndr3700-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_netgear_wndr4300.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_netgear_wndr4300sw.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_netgear_wndr4300tn.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_netgear_wndr_usb.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_netgear_wndr_wan.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_netgear_wndr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_ocedo_raccoon.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_openmesh_mr600-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_openmesh_mr600-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_openmesh_mr600.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_openmesh_om5p-an.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_openmesh_om5p.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_pcs_cap324.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_pcs_cr5000.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_qihoo_c301.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_qxwlan_e750a-v4-8m.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_qxwlan_e750a-v4-16m.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_qxwlan_e750g-v8-8m.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_qxwlan_e750g-v8-16m.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_qxwlan_e750x.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_ruckus_zf7372.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_samsung_wam250.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_senao_ap-dual.dtsi ath79: fix pci_device_reg errors 2024-01-05 16:17:58 +01:00
ar9344_teltonika_rut9xx.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_teltonika_rut955-h7v3c0.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_teltonika_rut955.dts ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_tplink_cpe210-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_cpe220-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_cpe510-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_cpe510-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_cpe510-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_cpe605-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_cpe610-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_cpe610-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_cpe_1port.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_cpe_2port.dtsi ath79: remove redundant nvmem definitions 2021-08-20 18:13:55 +02:00
ar9344_tplink_cpe.dtsi ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9344_tplink_tl-wdr3500-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_tl-wdr3600-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_tl-wdr4300-v1-il.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_tl-wdr4300-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_tl-wdr4300.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_tplink_tl-wdr4310-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_tl-wdrxxxx.dtsi ath79: ar: convert to mac-base 2023-11-25 21:34:18 -08:00
ar9344_tplink_tl-wr841hp-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_tplink_wbs210-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_wbs210-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_wbs510-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_tplink_wbs510-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
ar9344_ubnt_unifi-ap-pro.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9344_watchguard_ap100.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_watchguard_ap200.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_wd_mynet-n600.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
ar9344_wd_mynet-n750.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_wd_mynet-nxxx.dtsi ath79: add support for WD My Net N600 2021-12-11 00:50:02 +01:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_winchannel_wb2000.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
ar9344_zbtlink_zbt-wd323.dts ath79: ar: convert to nvmem-layout 2023-11-25 21:34:18 -08:00
ar9344.dtsi ath79: rename pcie-controller to pcie 2024-01-05 16:17:57 +01:00
arxxxx_fortinet_loader.dtsi ath79: fortinet-fap-220-b: convert to nvmem-layout 2023-11-27 00:34:49 +01:00
ath79.dtsi ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca953x_dlink_dap-2xxx.dtsi ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca953x_tplink_tl-wr810n.dtsi ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca953x.dtsi ath79: rename pcie-controller to pcie 2024-01-05 16:17:57 +01:00
qca955x_dlink_dap-2xxx.dtsi ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca955x_elecom_wab.dtsi ath79: drop unnecessary &uart node from dtsi of QCA955x devices 2024-03-08 17:35:01 +01:00
qca955x_engenius_ecb1xxx.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca955x_senao_loader.dtsi ath79: fix pci_device_reg errors 2024-01-05 16:17:58 +01:00
qca955x_senao_router-dual.dtsi ath79: fix pci_device_reg errors 2024-01-05 16:17:58 +01:00
qca955x_ubnt_xc.dtsi ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca955x_zyxel_nbg6x16.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
qca955x.dtsi ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca956x.dtsi ath79: rename pcie-controller to pcie 2024-01-05 16:17:57 +01:00
qca9531_8dev_lima.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9531_alcatel_hh40v.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_alfa-network_n2q.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_alfa-network_pi-wifi4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_alfa-network_r36a.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_alfa-network_r36a.dtsi ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9531_alfa-network_tube-2hq.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_asus_rp-ac51.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-e5.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-e130n-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-e313ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-e314n-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-e560ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-ew72.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_comfast_cf-wr752ac-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_compex_wpj531-16m.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9531_dlink_dch-g020-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_engenius_ews511ap.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-ar300m16.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9531_glinet_gl-ar300m-lite.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-ar300m-nand.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9531_glinet_gl-ar300m-nor.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9531_glinet_gl-ar300m.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-ar750.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-e750.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9531_glinet_gl-s200-nor-nand.dts ath79: add support for GL.iNet GL-S200 2023-10-31 13:53:11 +01:00
qca9531_glinet_gl-s200-nor.dts ath79: add support for GL.iNet GL-S200 2023-10-31 13:53:11 +01:00
qca9531_glinet_gl-s200.dtsi ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9531_glinet_gl-x300b.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-x750.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_glinet_gl-xe300.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_joyit_jt-or750i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_letv_lba-047-ch.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9531_mikrotik_routerboard-951ui-2nd.dts ath79: add support for MikroTik hAP (RB951Ui-2nD) 2022-05-21 13:54:08 +02:00
qca9531_qxwlan_e600g-v2-8m.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_qxwlan_e600g-v2-16m.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_qxwlan_e600g.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_qxwlan_e600gac-v2-8m.dts ath79: add support for Qxwlan E600G v2 / E600GAC v2 2020-11-12 17:18:26 +01:00
qca9531_qxwlan_e600gac-v2-16m.dts ath79: add support for Qxwlan E600G v2 / E600GAC v2 2020-11-12 17:18:26 +01:00
qca9531_telco_t1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_teltonika_rut300.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_tplink_archer-d50-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_tplink_tl-mr3420-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_tplink_tl-mr6400-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_tplink_tl-wr810n-v1.dts ath79: gpio to gpios 2024-01-05 16:17:58 +01:00
qca9531_tplink_tl-wr902ac-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_wallys_dr531.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9531_yuncore_a770.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_comfast_cf-e110n-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_dlink_dap-13xx.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_dlink_dap-1330-a1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_dlink_dap-1365-a1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_dlink_dap-2230-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_dlink_dap-3320-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_kuwfi_c910.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_mikrotik_routerboard-16m.dtsi ath79: add support for MikroTik RouterBOARD 750 r2 (hEX lite) 2023-09-16 12:49:26 +02:00
qca9533_mikrotik_routerboard-95x.dtsi ath79: add support for MikroTik RouterBOARD 750 r2 (hEX lite) 2023-09-16 12:49:26 +02:00
qca9533_mikrotik_routerboard-750-r2.dts ath79: add support for MikroTik RouterBOARD 750 r2 (hEX lite) 2023-09-16 12:49:26 +02:00
qca9533_mikrotik_routerboard-952ui-5ac2nd.dts ath79: add support for MikroTik RouterBOARD hAP ac lite 2022-05-21 13:54:02 +02:00
qca9533_mikrotik_routerboard-lhg-2nd.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_mikrotik_routerboard-lhg-hb.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_mikrotik_routerboard-map-2nd.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_mikrotik_routerboard-mapl-2nd.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_mikrotik_routerboard-wap-2nd.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_mikrotik_routerboard-wapr-2nd.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_openmesh_om2p-hs-v4.dts ath79: Add support for OpenMesh OM2P-HS v4 2020-12-28 19:37:24 +01:00
qca9533_openmesh_om2p-v4.dts ath79: Add support for OpenMesh OM2P v4 2020-12-28 19:37:24 +01:00
qca9533_openmesh_om2p-v4.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_plasmacloud_pa300.dts ath79: Add support for Plasma Cloud PA300 2020-12-22 19:11:50 +01:00
qca9533_plasmacloud_pa300.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_plasmacloud_pa300e.dts ath79: Add support for Plasma Cloud PA300E 2020-12-22 19:11:50 +01:00
qca9533_qca_ap143-8m.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9533_qca_ap143-16m.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9533_qca_ap143.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_cpe210-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_cpe210-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_cpe210.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_cpe220-v3.dts ath79: remove redundant nvmem definitions 2021-08-20 18:13:55 +02:00
qca9533_tplink_cpexxx.dtsi ath79: fix avoid_unnecessary_addr_size warnings 2024-01-05 16:17:57 +01:00
qca9533_tplink_tl-wa801nd-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wa801nd-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wa801nd.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_tl-wa850re-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_tl-wr802n-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr802n-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr802n.dtsi ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9533_tplink_tl-wr810n-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr841-v9.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr841-v10.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr841-v11.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr841-v11.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_tl-wr841-v12.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9533_tplink_tl-wr841.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_tl-wr841hp-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_tplink_tl-wr842n-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9533_ubnt_aircube-isp.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9533_yuncore_a930.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9550_airtight_c-75.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9550_huawei_ap5030dn.dts ath79: add support for Huawei AP5030DN 2024-03-31 18:09:43 +02:00
qca9556_avm_fritz450e.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9556_avm_fritz1750e.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9556_avm_fritz-repeater.dtsi ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9556_avm_fritzdvbc.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9557_8dev_rambutan.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9557_araknis_an-500-ap-i-ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_buffalo_bhr-4grv2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_dlink_dap-2660-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_dongwon_dw02-412h-64m.dts ath79: improve support for Dongwon T&I DW02-412H 2022-02-01 14:54:16 +09:00
qca9557_dongwon_dw02-412h-128m.dts ath79: improve support for Dongwon T&I DW02-412H 2022-02-01 14:54:16 +09:00
qca9557_dongwon_dw02-412h.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_elecom_wab-s600-ps.dts ath79: add support for ELECOM WAB-S600-PS 2024-03-02 14:08:08 +01:00
qca9557_elecom_wab-s1167-ps.dts ath79: add support for ELECOM WAB-S1167-PS 2024-03-02 14:08:08 +01:00
qca9557_engenius_eap1200h.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_engenius_ecb1200.dts ath79: create common DTSI for ECB1200 and ECB1750 2020-12-22 19:11:50 +01:00
qca9557_engenius_enstationac-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_engenius_esr1200.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_extreme-networks_ws-ap3805i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_iodata_wn-ac1167dgr.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9557_iodata_wn-ac1600dgr.dts ath79: convert ath10k calibration data to NVMEM (ASCII MAC) 2024-02-01 17:09:03 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9557_meraki_mr18.dts ath79: drop unnecessary &uart node from dtsi of QCA955x devices 2024-03-08 17:35:01 +01:00
qca9557_zyxel_nbg6616.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_allnet_all-wap02860ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_araknis_an-700-ap-i-ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_aruba_ap-115.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_belkin_f9j1108-v2.dts ath79: create shared DTSI/definition for Belkin F9J1108/F9K1115 v2 2020-12-14 16:57:21 +01:00
qca9558_belkin_f9k1115-v2.dts ath79: add support for the Belkin F9K1115 v2 (AC1750 DB Wi-Fi) 2020-12-14 16:59:49 +01:00
qca9558_belkin_f9x-v2.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_comfast_cf-e380ac-v2.dts ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_comfast_cf-wr650ac-v1.dts ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9558_comfast_cf-wr650ac-v2.dts ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9558_comfast_cf-wr650ac.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_compex_wpj558-16m.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9558_devolo_dvl1xxx.dtsi ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_devolo_dvl1200e.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_devolo_dvl1200i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_devolo_dvl1750c.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_devolo_dvl1750e.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_devolo_dvl1750i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_devolo_dvl1750x.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_dlink_dap-2680-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_dlink_dap-2695-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_dlink_dap-3662-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_dlink_dir-629-a1.dts ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_domywifi_dw33d.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_elecom_wab-i1750-ps.dts ath79: register all ttys as Linux console for ELECOM WAB-I1750-PS 2024-03-24 21:10:59 +01:00
qca9558_engenius_eap1750h.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_engenius_ecb1750.dts ath79: create common DTSI for ECB1200 and ECB1750 2020-12-22 19:11:50 +01:00
qca9558_engenius_epg5000.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_engenius_esr900.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_engenius_esr1750.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_engenius_ews660ap.dts ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9558_jjplus_jwap230.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9558_librerouter_librerouter-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_linksys_ea4500-v3.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9558_mikrotik_routerboard-92x.dtsi ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_mikrotik_routerboard-96x.dtsi ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_mikrotik_routerboard-911g-5hpacd.dts ath79: support MikroTik RouterBOARD 911G-5HPacD 2024-01-07 01:19:56 +01:00
qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts ath79: support MikroTik RouterBOARD 911G-5HPacD 2024-01-07 01:19:56 +01:00
qca9558_mikrotik_routerboard-922uags-5hpacd.dts ath79: support MikroTik RouterBOARD 911G-5HPacD 2024-01-07 01:19:56 +01:00
qca9558_mikrotik_routerboard-962uigs-5hact2hnt.dts ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) 2022-04-16 16:59:29 +02:00
qca9558_netgear_ex7300.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_ocedo_koala.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_ocedo_ursus.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_openmesh_a40.dts ath79: Add support for OpenMesh A40 2021-06-05 01:17:11 +02:00
qca9558_openmesh_a60.dts ath79: Add support for OpenMesh A60 2021-06-05 01:17:11 +02:00
qca9558_openmesh_a60.dtsi ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_openmesh_mr900-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_openmesh_mr900-v2.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_openmesh_mr1750-v1.dts ath79: Add support for OpenMesh MR1750 v1 2021-01-19 21:41:26 +01:00
qca9558_openmesh_mr1750-v2.dts ath79: Add support for OpenMesh MR1750 v2 2021-01-19 21:41:26 +01:00
qca9558_openmesh_mr.dtsi ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_openmesh_om5p-ac-v1.dts ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_openmesh_om5p-ac-v2.dts ath79: add aliases to qca955x.dtsi for uart0/1 2024-03-08 17:35:01 +01:00
qca9558_qxwlan_e558-v2-8m.dts ath79: add support for Qxwlan E558 v2 2020-10-17 20:17:59 +02:00
qca9558_qxwlan_e558-v2-16m.dts ath79: add support for Qxwlan E558 v2 2020-10-17 20:17:59 +02:00
qca9558_qxwlan_e558.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_sitecom_wlr-8100.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_sophos_ap15.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_sophos_ap55.dts ath79: add support for Sophos AP100/AP55 family 2022-04-16 16:59:29 +02:00
qca9558_sophos_ap55c.dts ath79: add support for Sophos AP100/AP55 family 2022-04-16 16:59:29 +02:00
qca9558_sophos_ap100.dts ath79: add support for Sophos AP100/AP55 family 2022-04-16 16:59:29 +02:00
qca9558_sophos_ap100c.dts ath79: add support for Sophos AP100/AP55 family 2022-04-16 16:59:29 +02:00
qca9558_sophos_ap.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_archer-c5-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9558_tplink_archer-c7-v2.dts ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9558_tplink_archer-c.dtsi ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
qca9558_tplink_archer-d7-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_tplink_archer-d7.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_archer-d7b-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_tplink_re350k-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_re355-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9558_tplink_re450-v1.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9558_tplink_rex5x.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_tl-wdr4900-v2.dts ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9558_tplink_tl-wdr7500-v3.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9558_tplink_tl-wr941n-v7-cn.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9558_tplink_tl-wr1043nd.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_tplink_tl-wr1045nd-v2.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9558_trendnet_tew-823dru.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_ubnt_nanobeam-ac-xc.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_ubnt_powerbeam-5ac-500.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9558_ubnt_rocket-5ac-lite.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9558_watchguard_ap300.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9558_zyxel_emg2926_q10a.dts ath79: add Zyxel EMG2926-Q10A 2022-02-26 13:36:30 +01:00
qca9558_zyxel_nbg6716.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_avm_fritz4020.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_nec_wf1200cr.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c5x.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c6x.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c25-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c58-v1.dts ath79: convert ath10k pre-calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9561_tplink_archer-c59-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c59-v2.dts ath79: convert ath10k pre-calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9561_tplink_archer-c60-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c60-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_archer-c60-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_eap225-wall-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_tplink_tl-wdr6500-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9561_xiaomi_mi-router-4q.dts ath79: qca: remove mac-address-increment 2023-11-25 17:14:04 -08:00
qca9563_asus_pl-ac56.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_asus_rp-ac66.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_comfast_cf-e375ac.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_compex_wpj563.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9563_dlink_covr-c1200-a1.dts ath79: add support for D-Link COVR-C1200 A1 2024-03-09 20:00:11 +01:00
qca9563_dlink_covr-p2500-a1.dts ath79: split dtsi for D-Link COVR-P2500 2024-03-09 20:00:11 +01:00
qca9563_dlink_covr.dtsi ath79: split dtsi for D-Link COVR-P2500 2024-03-09 20:00:11 +01:00
qca9563_dlink_dap-1720-a1.dts ath79: add support for D-link DAP-1720 A1 2023-11-26 18:27:35 +01:00
qca9563_dlink_dir-8x9-a1.dtsi ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9563_dlink_dir-842-c1.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9563_dlink_dir-842-c2.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9563_dlink_dir-842-c3.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9563_dlink_dir-842-c.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_dlink_dir-859-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_dlink_dir-859-a3.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9563_dlink_dir-869-a1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_elecom_wrc-ghbk2-i.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_glinet_gl-ar750s-nor-nand.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_glinet_gl-ar750s-nor.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_glinet_gl-ar750s.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_glinet_gl-x1200-nor-nand.dts ath79: add support for GL.iNet GL-X1200 2023-02-25 14:31:42 +01:00
qca9563_glinet_gl-x1200-nor.dts ath79: add support for GL.iNet GL-X1200 2023-02-25 14:31:42 +01:00
qca9563_glinet_gl-x1200.dtsi ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9563_nec_wg800hp.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_nec_wg1200cr.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_netgear_wndr4300-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_netgear_wndr4500-v3.dts ath79: move usb led trigger node to SoC dtsi 2022-11-12 17:10:12 +01:00
qca9563_netgear_wndr.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_phicomm_k2t.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_qxwlan_e1700ac-v2-8m.dts ath79: add support for Qxwlan E1700AC v2 2020-10-17 20:18:00 +02:00
qca9563_qxwlan_e1700ac-v2-16m.dts ath79: add support for Qxwlan E1700AC v2 2020-10-17 20:18:00 +02:00
qca9563_qxwlan_e1700ac.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_rosinson_wr818.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9563_tplink_archer-a7-v5.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_archer-c2-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_archer-c6-v2-us.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_archer-c6-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_archer-c7-v4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_archer-c7-v5.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_archer-x6-v2.dtsi ath79: drop phy-mask property 2022-06-15 20:07:26 +02:00
qca9563_tplink_archer-x7-v5.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_cpe710-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_deco-m4r-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_deco-s4-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap2x5-1port.dtsi ath79: fix mac address on eap2x5-1port devices 2024-01-23 10:41:20 +01:00
qca9563_tplink_eap225-outdoor-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap225-outdoor-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap225-v1.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap225-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap225-v4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap245-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_eap245-v3.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_re450-v2.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_re450-v3.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_re450.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_re455-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_tl-wa1201-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_tl-wpa8630-v1.dts ath79: convert ath10k calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_tl-wpa8630.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_tl-wpa8630p-v2-int.dts ath79: convert ath10k pre-calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_tl-wpa8630p-v2.0-eu.dts ath79: convert ath10k pre-calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_tl-wpa8630p-v2.1-eu.dts ath79: convert ath10k pre-calibration data to NVMEM (binary MAC) 2024-02-01 17:09:02 +01:00
qca9563_tplink_tl-wr1043n-v5.dts ath79: qca: convert to nvmem-layout 2023-11-25 17:14:04 -08:00
qca9563_tplink_tl-wr1043n.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_ubnt_uk-ultra.dts ath79: add support for UniFi UK-Ultra 2024-01-07 23:06:17 +01:00
qca9563_ubnt_unifiac-lite.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: drop phy-mask property 2022-06-15 20:07:26 +02:00
qca9563_ubnt_unifiac-lr.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: drop phy-mask property 2022-06-15 20:07:26 +02:00
qca9563_ubnt_unifiac.dtsi ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9563_xiaomi_aiot-ac2350.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_yuncore_a782.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9563_yuncore_xd3200.dts ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9563_yuncore_xd4200.dts ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
qca9563_yuncore_xd4200.dtsi ath79: convert ath10k calibration data to NVMEM (built-in MAC) 2024-02-01 17:09:02 +01:00
qca9563_zte_mf28x.dtsi ath79: refactor ZTE MF28x dts files 2023-05-06 20:59:46 +02:00
qca9563_zte_mf281.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9563_zte_mf282.dts ath79: drop redundant label with new LED color/function format 2024-02-07 14:48:34 +01:00
qca9563_zte_mf286.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_zte_mf286.dtsi ath79: refactor ZTE MF28x dts files 2023-05-06 20:59:46 +02:00
qca9563_zte_mf286a.dts ath79: support ZTE MF286A/R 2022-02-26 17:46:10 +01:00
qca9563_zte_mf286ar.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qca9563_zte_mf286r.dts ath79: support ZTE MF286A/R 2022-02-26 17:46:10 +01:00
qcn5502_asus_rt-ac59u-v2.dts ath79: add support for ASUS RT-AC59U / ZenWiFi CD6 2023-07-08 20:19:00 +02:00
qcn5502_asus_rt-ac59u.dts ath79: add support for ASUS RT-AC59U / ZenWiFi CD6 2023-07-08 20:19:00 +02:00
qcn5502_asus_rt-ac59u.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qcn5502_asus_zenwifi-cd6.dtsi ath79: add support for ASUS RT-AC59U / ZenWiFi CD6 2023-07-08 20:19:00 +02:00
qcn5502_asus_zenwifi-cd6n.dts ath79: add support for ASUS RT-AC59U / ZenWiFi CD6 2023-07-08 20:19:00 +02:00
qcn5502_asus_zenwifi-cd6r.dts ath79: add support for ASUS RT-AC59U / ZenWiFi CD6 2023-07-08 20:19:00 +02:00
qcn5502_asus.dtsi ath79: qcn: convert to nvmem-layout 2023-11-25 19:43:32 -08:00
qcn5502_netgear_ex7300-v2.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
qcn5502_tplink_archer-a9-v6.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wa901nd-v4.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
tp9343_tplink_tl-wa901nd-v5.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
tp9343_tplink_tl-wa901nd.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wr94x.dtsi ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-18 13:35:38 +02:00
tp9343_tplink_tl-wr940n-v3.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
tp9343_tplink_tl-wr940n-v3.dtsi ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wr940n-v4.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wr940n-v6.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wr941hp-v1.dts ath79: convert to new LED color/function format where possible 2024-02-07 14:48:34 +01:00
tp9343_tplink_tl-wr941nd-v6.dts ath79: move dts-v1 statement to ath79.dtsi 2020-09-25 23:26:34 +02:00
tp9343_tplink_tl-wx.dtsi ath79: tp9343: convert to nvmem-layout 2023-11-25 19:43:35 -08:00