openwrt/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
Christian Marangi e3ddfcc70c
ath79: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:34 +01:00

290 lines
4.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio_11>;
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan2g_green {
label = "green:wlan2g";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g_blue {
label = "blue:wlan5g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wps_green {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wps_amber {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ubi@0 {
label = "ubi";
reg = <0x0 0x7500000>;
};
};
};
};
&pinmux {
enable_gpio_11: pinmux_enable_gpio_11 {
pinctrl-single,bits = <0x8 0x0 0xff000000>;
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x40000>;
};
caldata: partition@80000 {
label = "caldata";
reg = <0x80000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_caldata_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_caldata_c: macaddr@c {
reg = <0xc 0x6>;
};
cal_art_1000: cal@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: cal@5000 {
reg = <0x5000 0x440>;
};
};
};
partition@c0000 {
label = "pot";
reg = <0xc0000 0x80000>;
};
partition@140000 {
label = "language";
reg = <0x140000 0x200000>;
};
partition@340000 {
label = "config";
reg = <0x340000 0x80000>;
};
partition@3c0000 {
label = "traffic_meter";
reg = <0x3c0000 0x300000>;
};
partition@6c0000 {
label = "firmware";
reg = <0x6c0000 0x1900000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
kernel@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
ubiconcat0: partition@400000 {
label = "ubiconcat0";
reg = <0x400000 0x1500000>;
};
};
partition@1fc0000 {
label = "caldata_backup";
reg = <0x1fc0000 0x40000>;
read-only;
};
ubiconcat1: partition@2000000 {
label = "ubiconcat1";
reg = <0x2000000 0x6000000>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&builtin_switch {
resets = <&rst 8>, <&rst 12>;
reset-names = "switch", "switch-analog";
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x07600000
0x0c 0x01000000
0x10 0xc1000000
0x50 0xcc35cc35
0x54 0xcb37cb37
0x58 0x00000000
0x5c 0x00f3cf00
0x7c 0x0000007e
0x94 0x0000007e
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
nvmem-cells = <&macaddr_caldata_0>;
nvmem-cell-names = "mac-address";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&gpio {
lna0 {
gpio-hog;
line-name = "netgear:ext:lna0";
gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
};
lna1 {
gpio-hog;
line-name = "netgear:ext:lna1";
gpios = <19 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_caldata_0>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&macaddr_caldata_c>, <&cal_art_5000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
};