mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-18 10:05:34 +00:00
ath79: Add support for OpenMesh A40
Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi (11n) * 2T2R 5 GHz Wi-Fi (11ac) * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x ethernet - eth0 + Label: Ethernet 1 + AR8035 ethernet PHY (RGMII) + 10/100/1000 Mbps Ethernet + 802.3af POE + used as WAN interface - eth1 + Label: Ethernet 2 + AR8035 ethernet PHY (SGMII) + 10/100/1000 Mbps Ethernet + used as LAN interface * 1x USB * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
parent
eaf2e32c12
commit
9a172797e5
@ -48,6 +48,7 @@ netgear,wnr2200-16m|\
|
||||
netgear,wnr612-v2|\
|
||||
ocedo,koala|\
|
||||
ocedo,raccoon|\
|
||||
openmesh,a40|\
|
||||
openmesh,a60|\
|
||||
openmesh,mr600-v1|\
|
||||
openmesh,mr600-v2|\
|
||||
|
8
target/linux/ath79/dts/qca9558_openmesh_a40.dts
Normal file
8
target/linux/ath79/dts/qca9558_openmesh_a40.dts
Normal file
@ -0,0 +1,8 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9558_openmesh_a60.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "openmesh,a40", "qca,qca9558";
|
||||
model = "OpenMesh A40";
|
||||
};
|
@ -170,6 +170,7 @@ ath79_setup_interfaces()
|
||||
comfast,cf-e120a-v3|\
|
||||
comfast,cf-e314n-v2|\
|
||||
compex,wpj531-16m|\
|
||||
openmesh,a40|\
|
||||
openmesh,a60|\
|
||||
openmesh,om2p-v4|\
|
||||
openmesh,om2p-hs-v4|\
|
||||
|
@ -98,6 +98,7 @@ case "$FIRMWARE" in
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
|
||||
;;
|
||||
openmesh,a40|\
|
||||
openmesh,a60|\
|
||||
openmesh,mr1750-v1|\
|
||||
openmesh,mr1750-v2)
|
||||
|
@ -65,6 +65,7 @@ platform_do_upgrade() {
|
||||
jjplus,ja76pf2)
|
||||
redboot_fis_do_upgrade "$1" linux
|
||||
;;
|
||||
openmesh,a40|\
|
||||
openmesh,a60|\
|
||||
openmesh,mr600-v1|\
|
||||
openmesh,mr600-v2|\
|
||||
|
@ -1628,6 +1628,16 @@ define Device/openmesh_common_256k
|
||||
openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
|
||||
endef
|
||||
|
||||
define Device/openmesh_a40
|
||||
$(Device/openmesh_common_64k)
|
||||
SOC := qca9558
|
||||
DEVICE_MODEL := A40
|
||||
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
||||
OPENMESH_CE_TYPE := A60
|
||||
SUPPORTED_DEVICES += a40
|
||||
endef
|
||||
TARGET_DEVICES += openmesh_a40
|
||||
|
||||
define Device/openmesh_a60
|
||||
$(Device/openmesh_common_64k)
|
||||
SOC := qca9558
|
||||
|
Loading…
x
Reference in New Issue
Block a user