ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ath79: support for MikroTik RouterBOARD 911G-(2,5)HPnD

Browse Source 
This is a stripped-down version of RB912UAG-(2,5)HPnD, without USB,
miniPCIe and SIM sockets.
This board has been supported in the ar71xx.

Add support based on RB912UAG board, by splitting out the common part to
.dtsi, and creating separate device tree for the stripped-down version.

Links:
* https://mikrotik.com/product/RB911G-2HPnD
* https://mikrotik.com/product/RB911G-5HPnD
* https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb911g-5hpnd

Hardware:
* SoC: Atheros AR9342,
* RAM: DDR 64MB,
* SPI NOR: 64KB,
* NAND: 128MB,
* Ethernet: x1 10/100/1000 port with passive POE in,
* Wi-Fi: 802.11 a/b/g/n (depending on band variant)
* LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED,
  Ethernet phy LED,
* Button,
* Beeper.

Flashing:
* Use the RouterBOARD Reset button to enable TFTP netboot,
boot kernel and initramfs and then perform sysupgrade.
* From ar71xx OpenWrt firmware run:
  $ sysupgrade -F /tmp/<sysupgrade.bin>
For more info see: https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
This commit is contained in:
Lech Perczak 2023-11-18 16:53:45 +01:00 committed by Hauke Mehrtens
parent d13d513b9f
commit bcc44b1212
7 changed files with 250 additions and 217 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
target/linux/ath79/dts/ar9342_mikrotik_routerboard-911g-xhpnd.dts Normal file
View File

@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "ar9342_mikrotik_routerboard-911g.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "mikrotik,routerboard-911g-xhpnd", "qca,ar9342";
model = "MikroTik RouterBOARD 911G-(2,5)HPnD";
};

224
target/linux/ath79/dts/ar9342_mikrotik_routerboard-911g.dtsi Normal file
View File

@ -0,0 +1,224 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
gpio_key: gpio_key {
compatible = "mikrotik,gpio-rb91x-key";
gpio-controller;
#gpio-cells = <2>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
gpio_latch: gpio_latch {
compatible = "gpio-latch";
gpio-controller;
#gpio-cells = <2>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>,
<&gpio 1 GPIO_ACTIVE_HIGH>,
<&gpio 2 GPIO_ACTIVE_HIGH>,
<&gpio 3 GPIO_ACTIVE_HIGH>,
<0>, /* Not connected */
<&gpio 13 GPIO_ACTIVE_HIGH>,
<&gpio 14 GPIO_ACTIVE_HIGH>,
<&gpio_key 0 GPIO_ACTIVE_HIGH>,
<&gpio 11 GPIO_ACTIVE_LOW>; /* Latch Enable */
};
nand_gpio {
compatible = "mikrotik,rb91x-nand";
gpios = <&gpio_latch 3 GPIO_ACTIVE_HIGH>, /* Read */
<&gpio 4 GPIO_ACTIVE_HIGH>, /* Ready (RDY) */
<&gpio_latch 5 GPIO_ACTIVE_LOW>, /* Chip Enable (nCE) */
<&gpio_latch 6 GPIO_ACTIVE_HIGH>, /* Command Latch Enable (CLE) */
<&gpio_latch 7 GPIO_ACTIVE_HIGH>, /* Address Latch Enable (ALE) */
<&gpio 12 GPIO_ACTIVE_LOW>, /* Read/Write Enable (nRW) */
<&gpio_latch 8 GPIO_ACTIVE_LOW>, /* Latch Enable (nLE) */
<&gpio_key 2 GPIO_ACTIVE_HIGH>; /* Key poll disable */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "booter";
reg = <0x0 0x0040000>;
read-only;
};
partition@40000 {
label = "kernel";
reg = <0x0040000 0x03c0000>;
};
partition@400000 {
label = "ubi";
reg = <0x0400000 0x7c00000>;
};
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_key 1 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio_latch 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user {
label = "green:user";
gpios = <&gpio_latch 2 GPIO_ACTIVE_HIGH>;
};
led1 {
label = "green:led1";
gpios = <&ssr 0 GPIO_ACTIVE_HIGH>;
};
led2 {
label = "green:led2";
gpios = <&ssr 1 GPIO_ACTIVE_HIGH>;
};
led3 {
label = "green:led3";
gpios = <&ssr 2 GPIO_ACTIVE_HIGH>;
};
led4 {
label = "green:led4";
gpios = <&ssr 3 GPIO_ACTIVE_HIGH>;
};
led5 {
label = "green:led5";
gpios = <&ssr 4 GPIO_ACTIVE_HIGH>;
};
};
gpio-export {
compatible = "gpio-export";
beeper {
gpio-export,name = "beeper";
gpio-export,output = <1>; /* Must be 1 to avoid EMI induced clicking noise */
gpios = <&ssr 5 GPIO_ACTIVE_HIGH>;
};
usb_power {
gpio-export,name = "power-usb";
gpio-export,output = <1>;
gpios = <&ssr 6 GPIO_ACTIVE_HIGH>;
};
pcie_power {
gpio-export,name = "power-pcie";
gpio-export,output = <0>;
gpios = <&ssr 7 GPIO_ACTIVE_HIGH>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
compatible = "qca,ar7100-spi";
cs-gpios = <0>, <&gpio_latch 0 GPIO_ACTIVE_LOW>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "routerboot";
reg = <0x0 0x0>;
read-only;
};
hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
soft_config {
};
};
};
ssr: ssr@1 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
reg = <1>;
spi-max-frequency = <50000000>;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
pll-data = <0x02000000 0x00000101 0x00001313>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <1>;
txd-delay = <1>;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};

218
target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts
View File

@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "ar9344.dtsi"
#include "ar9342_mikrotik_routerboard-911g.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@ -8,222 +8,6 @@
/ {
compatible = "mikrotik,routerboard-912uag-2hpnd", "qca,ar9342";
model = "MikroTik RouterBOARD 912UAG-(2,5)HPnD";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
gpio_key: gpio_key {
compatible = "mikrotik,gpio-rb91x-key";
gpio-controller;
#gpio-cells = <2>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
gpio_latch: gpio_latch {
compatible = "gpio-latch";
gpio-controller;
#gpio-cells = <2>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>,
<&gpio 1 GPIO_ACTIVE_HIGH>,
<&gpio 2 GPIO_ACTIVE_HIGH>,
<&gpio 3 GPIO_ACTIVE_HIGH>,
<0>, /* Not connected */
<&gpio 13 GPIO_ACTIVE_HIGH>,
<&gpio 14 GPIO_ACTIVE_HIGH>,
<&gpio_key 0 GPIO_ACTIVE_HIGH>,
<&gpio 11 GPIO_ACTIVE_LOW>; /* Latch Enable */
};
nand_gpio {
compatible = "mikrotik,rb91x-nand";
gpios = <&gpio_latch 3 GPIO_ACTIVE_HIGH>, /* Read */
<&gpio 4 GPIO_ACTIVE_HIGH>, /* Ready (RDY) */
<&gpio_latch 5 GPIO_ACTIVE_LOW>, /* Chip Enable (nCE) */
<&gpio_latch 6 GPIO_ACTIVE_HIGH>, /* Command Latch Enable (CLE) */
<&gpio_latch 7 GPIO_ACTIVE_HIGH>, /* Address Latch Enable (ALE) */
<&gpio 12 GPIO_ACTIVE_LOW>, /* Read/Write Enable (nRW) */
<&gpio_latch 8 GPIO_ACTIVE_LOW>, /* Latch Enable (nLE) */
<&gpio_key 2 GPIO_ACTIVE_HIGH>; /* Key poll disable */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "booter";
reg = <0x0 0x0040000>;
read-only;
};
partition@40000 {
label = "kernel";
reg = <0x0040000 0x03c0000>;
};
partition@400000 {
label = "ubi";
reg = <0x0400000 0x7c00000>;
};
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_key 1 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio_latch 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user {
label = "green:user";
gpios = <&gpio_latch 2 GPIO_ACTIVE_HIGH>;
};
led1 {
label = "green:led1";
gpios = <&ssr 0 GPIO_ACTIVE_HIGH>;
};
led2 {
label = "green:led2";
gpios = <&ssr 1 GPIO_ACTIVE_HIGH>;
};
led3 {
label = "green:led3";
gpios = <&ssr 2 GPIO_ACTIVE_HIGH>;
};
led4 {
label = "green:led4";
gpios = <&ssr 3 GPIO_ACTIVE_HIGH>;
};
led5 {
label = "green:led5";
gpios = <&ssr 4 GPIO_ACTIVE_HIGH>;
};
};
gpio-export {
compatible = "gpio-export";
beeper {
gpio-export,name = "beeper";
gpio-export,output = <1>; /* Must be 1 to avoid EMI induced clicking noise */
gpios = <&ssr 5 GPIO_ACTIVE_HIGH>;
};
usb_power {
gpio-export,name = "power-usb";
gpio-export,output = <1>;
gpios = <&ssr 6 GPIO_ACTIVE_HIGH>;
};
pcie_power {
gpio-export,name = "power-pcie";
gpio-export,output = <0>;
gpios = <&ssr 7 GPIO_ACTIVE_HIGH>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
compatible = "qca,ar7100-spi";
cs-gpios = <0>, <&gpio_latch 0 GPIO_ACTIVE_LOW>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "routerboot";
reg = <0x0 0x0>;
read-only;
};
hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
soft_config {
};
};
};
ssr: ssr@1 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
reg = <1>;
spi-max-frequency = <50000000>;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
pll-data = <0x02000000 0x00000101 0x00001313>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <1>;
txd-delay = <1>;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&pcie {

10
target/linux/ath79/image/mikrotik.mk
View File

@ -28,6 +28,16 @@ define Device/mikrotik_routerboard-911-lite
endef
TARGET_DEVICES += mikrotik_routerboard-911-lite
define Device/mikrotik_routerboard-911g-xhpnd
$(Device/mikrotik_nand)
SOC := ar9342
DEVICE_MODEL := RouterBOARD 911G-2HPnD
DEVICE_ALT0_VENDOR := Mikrotik
DEVICE_ALT0_MODEL := RouterBOARD 911G-5HPnD
SUPPORTED_DEVICES += rb-912uag-2hpnd
endef
TARGET_DEVICES += mikrotik_routerboard-911g-xhpnd
define Device/mikrotik_routerboard-912uag-2hpnd
$(Device/mikrotik_nand)
SOC := ar9342

2
target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
View File

@ -20,6 +20,7 @@ ath79_setup_interfaces()
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2"
;;
mikrotik,routerboard-911-lite|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\
@ -61,6 +62,7 @@ ath79_setup_macs()
case "$board" in
mikrotik,routerboard-911-lite|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\

1
target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -24,6 +24,7 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
mikrotik,routerboard-911-lite|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\

1
target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
View File

@ -30,6 +30,7 @@ platform_do_upgrade() {
case "$board" in
mikrotik,routerboard-493g|\
mikrotik,routerboard-911g-xhpnd|\
mikrotik,routerboard-912uag-2hpnd|\
mikrotik,routerboard-921gs-5hpacd-15s|\
mikrotik,routerboard-922uags-5hpacd|\