Xianjun Jiao
c24e0a046d
sdr.c: change the legacy tx_itrpt1 to tx_itrpt
2021-05-05 16:53:15 +02:00
Xianjun Jiao
c687b19dde
minor update on xilinx dma driver related stuffs
2021-05-05 16:46:28 +02:00
Xianjun Jiao
56fcab2044
udpate ad9361 driver related stuffs:
...
we do not maintain our own (modified) ad9361 driver anymore! The original ad9361 driver in the Linux kernel tree can be used with some extra EXPORT_SYMBOL.
2021-05-05 16:44:39 +02:00
Xianjun Jiao
fc47ee1d62
fix the bug when retry_limit_raw==0 in sdr.c (0 is the abnormal number encountered in the monitor mode. normally it should >= 1). the bug causes 15 times transmissions for a packet if no ack is received
2021-04-05 21:53:29 +02:00
Xianjun Jiao
bb0a2c5897
in xpu.v slv_reg19 and slv_reg8 are not twistted anymore. slv_reg6 is added to assist the register map in xpu more clear. separate registers for different purpose. separate registers for dynamic and static configurations in driver (sdr.c).
2021-04-05 21:49:59 +02:00
Xianjun Jiao
95d3c7c5f3
remove all the compiling warnings when build 32bit driver
2021-04-05 21:42:46 +02:00
Xianjun Jiao
027d42ec5b
Fix the state unsync issue between rx interrupt and mac80211. When the issue happens, only a new packet incoming could trigger an old rx packet going to mac80211 rx. And this new fix also could work with the original xilinx dma driver. Our slightly modified xilinx dma driver is not needed anymore.
2021-03-22 23:59:41 +01:00
luz paz
46c420ae77
Follow-up typo
2021-02-04 20:42:04 +01:00
luz paz
b1dd94e387
Fix various typos
...
Found via codespell v2.1.dev0
`codespell -q 3 -L ans,filp,fils,hsi`
2021-02-04 20:41:51 +01:00
Jiao Xianjun
55c2866f7c
Merge pull request #54 from lnceballosz/master
...
NGI0 - Updating licensing aspects according REUSE
2021-02-03 16:14:49 +01:00
Jiao Xianjun
32bfd1abde
Update sdr.c
2021-02-03 15:39:58 +01:00
weiliu
2238b42bb8
improve csma state machine, force ch_idle high after decode, log cw and num_slot_random in the last attempt
2021-01-28 14:15:29 +01:00
Lina Ceballos
a6085186d9
adding license and copyright headers
2021-01-20 13:30:12 +01:00
Jiao Xianjun
09316927a9
change the rssi_half_db_offset back to original
...
to get the correct rssi report.
2021-01-19 16:49:27 +01:00
mmehari
6e3730c0c1
Linux queue waking/sleeping decision update: LARGE FPGA models were using small MAX_NUM_DMA_SYMBOL but now is based on /proc/device-tree/model information
2020-12-29 21:33:36 +01:00
weiliu
5680efab70
enable dynamic cw
2020-12-28 16:03:51 +01:00
Xianjun Jiao
aa239344c1
use a better cca rssi threshold in sdr.c
2020-12-17 16:48:56 +01:00
Xianjun Jiao
5deb8d18f6
sync internal
2020-12-14 13:32:15 +01:00
mmehari
b6d7171315
sdr driver update for 80211n
2020-11-05 18:22:24 +01:00
Xianjun Jiao
22dd0cc486
the side channel (timestamp, frequency offset, CSI, equalizer) feature
2020-10-08 15:07:57 +02:00
Xianjun Jiao
0a92505df2
add recent update:
...
1. add git revision software register 7 to DRV_XPU module (not FPGA XPU module)
2. fix the print of hdr->seq_ctrl in sdr.c
3. add ht_flag display to sdr.c
4. remove the sysid from devicetree because new we have our own git revision read back solution in FPGA (XPU register 63) and driver (the sotware register 7 of drv_xpu)
5. add sudo to update_sdcard.sh to make the image generation without SD card in the test-bed easier
2020-09-04 10:57:04 +02:00
Xianjun Jiao
838a9007cf
update source coed of: 4 fpga queues and better driver/fpga flow control to avoid crash. improved slice cfg and printing
2020-06-12 10:50:34 +02:00
Xianjun Jiao
febc5adf73
prepare upgrade
2020-04-27 09:37:04 +02:00
Xianjun Jiao
75042a3073
fix the tsf warning in sdr.c and sdrctl
2020-03-06 14:05:47 +01:00
Xianjun Jiao
e63d1ec300
Jetmir: add tsf set command to sdrctl
2020-03-05 08:50:41 +01:00
Xianjun Jiao
b73660ad79
prepare for release
2020-03-04 19:39:12 +01:00
Xianjun Jiao
2a1e074623
fix the potential memory access over boundary issue of openwifi_rx_interrupt and make necessary configuration for new FPGA that tx sending out I/Q immediately after tx_start which achieves 10us SIFS in 2.4GHz
2020-01-07 14:17:08 +01:00
Xianjun Jiao
2054f92c88
Fix the bug for monitor mode in driver sdr.c openwifi_configure_filter() function. Seems like monitor mode will create and use a new virtual interface, so priv-vif[0] is not valid anymore when monitor mode start and call openwifi_configure_filter()
2020-01-03 18:53:21 +01:00
Xianjun Jiao
2ee6717882
initial commit
2019-12-10 14:03:47 +01:00
