Xianjun Jiao
9d7c6e634f
Update neptunesdr devicetree model name:
...
For auto board detection by cat /proc/device-tree/model
2023-03-14 16:27:35 +01:00
Jiao Xianjun
75dada428c
Add reboot hint into quick start guide.
2023-03-14 13:38:08 +01:00
Xianjun Jiao
bed4d10878
add sudo into update_sdcard.sh
2023-03-14 13:35:38 +01:00
Xianjun Jiao
7f62f3d5bf
Update papers link in case ugent server issue
2023-03-08 16:22:15 +01:00
Xianjun Jiao
4a79bc8c7e
Update img link in case ugent server issue
2023-03-08 15:31:52 +01:00
Jiao Xianjun
6efb6064e3
Download onboard www server video file from github
2023-03-07 21:20:28 +01:00
Xianjun Jiao
fa0c310b2a
Add hostapd password into README
2023-03-07 13:47:19 +01:00
Xianjun Jiao
69b9cfdbd7
Add password into hostapd conf
2023-03-07 13:45:51 +01:00
Xianjun Jiao
b02038957b
Change the default AP ch 44-->36:
...
Lower frequency, better RF performance
2023-03-03 11:58:24 +01:00
Xianjun Jiao
c9989970b0
Disable eifs_trigger_by_last_tx_fail by default:
...
Standard does not ask so
2023-02-27 19:58:13 +01:00
Xianjun Jiao
afbf0d645c
Add disable script to support eifs trigger config
2023-02-27 19:57:30 +01:00
Xianjun Jiao
aaceb807fd
Add sysfs to support xpu reg 6 bit27 26:
...
bit27 to disable eifs triggered by last rx fail
bit26 to disable eifs triggered by last tx fail
2023-02-27 19:56:32 +01:00
Jiao Xianjun
d2ed8f9830
Add neptunesdr EXT4-fs error to known issue.
2023-02-24 19:42:48 +01:00
Xianjun Jiao
1514086785
Update the dtb according to kuiper/notter for neptunesdr
2023-02-24 16:58:51 +01:00
Xianjun Jiao
51e498afbf
inject_80211 uses notter/kuiper kernel files:
...
prepare for 802.11ax
2023-02-14 15:58:03 +01:00
Jiao Xianjun
ff2afc149b
Add Mathy Vanhoef Wi-Fi frame injection paper:
...
WiSec 2023
2023-02-12 15:54:51 +01:00
Xianjun Jiao
fc4a13a9ca
Update devicetree for zc702 to avoid stuck
2023-02-10 13:21:27 +01:00
Xianjun Jiao
2fc0eeb2a5
Add official link of openwifi-1.4.0-notter.img.xz
2023-02-09 16:23:07 +01:00
Xianjun Jiao
441850b113
NO code change. Formating
2023-02-09 16:14:10 +01:00
Xianjun Jiao
ca63c39f0d
While changing fft_win_shift 1-->0 not touching bit [9:4]:
...
They are for equalizer monitor auto-rst: small_eq_out_counter_th
2023-02-09 16:12:16 +01:00
Xianjun Jiao
a17e30c7c8
Add a DHCP related known issue (potential)
2023-02-09 16:11:41 +01:00
Xianjun Jiao
3acd1024f6
Update devicetree for adrv9364z7020 to avoid stuck
2023-02-09 16:11:14 +01:00
Xianjun Jiao
daf7040c67
Add sub-us fast register reading example
2023-02-09 16:10:43 +01:00
Xianjun Jiao
ce08dfae84
Add author info into single_carrier_gen.m
2023-02-09 16:10:01 +01:00
Xianjun Jiao
3d5de43810
Let lbt sdrctl command show richer info for set_lbt_th.sh
2023-02-09 16:09:36 +01:00
Xianjun Jiao
6faed2c4d0
Make set_lbt_th.sh output more human friendly:
...
While no argument is given (for checking)
2023-02-09 16:09:11 +01:00
Xianjun Jiao
3d0e9e61c8
Add hidden option to specify board to udpate_sdcard.sh:
...
Save some time while doing experiment
2023-02-09 16:08:33 +01:00
Xianjun Jiao
2349a78387
DO NOT reconnect ad9361 while not loading FPGA:
...
Cause mess behavior on adrv9364z7020
2023-02-09 16:08:02 +01:00
Xianjun Jiao
a097294415
Change the initial sensitivity th from -95 to -85:
...
-85 is a good tradeoff between sensitivity and false alarm
-95 will result in lots of non necessary decoding action (false alarm), and sometimes it leads to abnormal receiver state (stuck, etc)
-95 should be set manually while doing conductive test with wifi tester
2023-02-03 16:27:51 +01:00
Xianjun Jiao
2a5da37c58
Add driver support for euqalizer monitor:
...
When the equalizer out is too small (48 out of 52/56) for SIGNAL decoding, watchdoc will reset the receiver
2023-02-03 16:26:58 +01:00
Xianjun Jiao
ce4469b31b
Add devicetree to PC-board transfer scripts
2023-02-03 16:26:09 +01:00
Jiao Xianjun
d684d4e9ec
Let populate_kernel_image_module_reboot continue:
...
Even if some files not existing (for some boards, they are supposed non existing).
2023-01-30 13:48:50 +01:00
Jiao Xianjun
42e8e67518
Update notter.md
2023-01-28 21:27:08 +01:00
Jiao Xianjun
7ac12f7cae
Update notter.md
2023-01-28 21:24:59 +01:00
Jiao Xianjun
dcda326515
Update notter.md
2023-01-28 21:10:55 +01:00
Jiao Xianjun
2ba8d921e9
Update README.md
2023-01-28 19:52:49 +01:00
Jiao Xianjun
0abab1b610
Update README.md
2023-01-28 19:52:17 +01:00
Jiao Xianjun
24baa18719
Update kuiper.md
2023-01-28 19:25:21 +01:00
Jiao Xianjun
d971c386e9
Update notter.md
2023-01-28 18:22:20 +01:00
Jiao Xianjun
85e48aea95
Update README.md
2023-01-28 18:19:19 +01:00
Jiao Xianjun
8b98c36d82
Merge pull request #267 from open-sdr/pre-release
...
Pre release
2023-01-28 11:55:04 +01:00
Xianjun Jiao
bfa0a5cda4
Improve the README and add known issue
2023-01-27 22:47:16 +01:00
Xianjun Jiao
b72abc1703
Resolve the potential re-booting issue:
...
1. issue: booting halt at Found device /dev/ttyPS0. Found device /dev/disk/by-partuuid/f7eeebee-01.
2. solution action 1. BOOT partition is full, more space needs to be released
3. solution action 2. move ad9361_drv/adi_axi_hdmi/axidmatest/lcd/xilinx_dma.ko outside kernel_modules (<-- lib/modules/...)
2023-01-27 22:31:22 +01:00
Jiao Xianjun
4443c30616
remove unnecessary commands in prepare_kernel.sh
2023-01-27 22:27:30 +01:00
Jiao Xianjun
ca7b319a4d
Update kuiper.md
2023-01-26 18:54:46 +01:00
Jiao Xianjun
58faac27a6
Update README.md
2023-01-26 18:54:12 +01:00
Xianjun Jiao
7eea29887a
Update docs for ADI kuiper (our notter release)
2023-01-26 17:11:46 +01:00
Xianjun Jiao
5a69caf8d7
Add setup_once.sh needed for new ADI kuiper SD card building flow
2023-01-26 17:10:13 +01:00
Xianjun Jiao
d951e04673
Adapt the wgd.sh for ADI kuiper (our notter release)
2023-01-26 17:09:31 +01:00
Xianjun Jiao
a0b49e8a77
Add Update the sd card build script for ADI kuiper
2023-01-26 17:08:52 +01:00
