ExternalVendorCode/openwifi
1
0
Fork 0
mirror of https://github.com/open-sdr/openwifi.git synced 2025-04-08 03:14:14 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Jiao Xianjun 2023-01-28 18:19:19 +01:00 committed by GitHub
parent 8b98c36d82
commit 85e48aea95
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -78,7 +78,7 @@ neptunesdr|Low cost Zynq 7020 + AD9361 board|**NO** need
[[Application notes](doc/app_notes/README.md)]
## Quick start
- Download [openwifi img](https://drive.google.com/file/d/1fb8eJGJAntOciCiGFVLfQs7m7ucRtSWD/view?usp=share_link) and burn it into a 16GB SD card. After this operation, the SD card should have two partitions: BOOT and rootfs. To flash the SD card, SD card tool software (such as Startup Disk Creator in Ubuntu) or dd command can be used:
- Download [openwifi img](https://drive.google.com/file/d/1fb8eJGJAntOciCiGFVLfQs7m7ucRtSWD/view?usp=share_link) and burn it into a SD card (>=16GB). After this operation, the SD card should have two partitions: BOOT and rootfs. To flash the SD card, SD card tool software (such as Startup Disk Creator in Ubuntu) or dd command can be used:
```
sudo dd bs=512 count=31116288 if=openwifi-xyz.img of=/dev/your_sdcard_dev
(To have correct count value, better to check the .img file actual situation by "fdisk -l img_filename")
@ -86,6 +86,7 @@ neptunesdr|Low cost Zynq 7020 + AD9361 board|**NO** need
- Config the **correct files in the BOOT partition** according to the **board you have** by operation on your computer:
- Copy files in **BOOT/openwifi/board_name** to the base directory of BOOT partition.
- Delete the **rootfs/root/kernel_modules** directory (if exist).
- Delete the **rootfs/root/etc/network/interfaces.new** directory (if exist).
- Insert the SD card to the board. Configure the board in SD booting mode. Connect antennas. Power on.
- Login to the board from your PC (PC Ethernet should have IP 192.168.10.1) with password **openwifi**.
```
@ -94,6 +95,7 @@ neptunesdr|Low cost Zynq 7020 + AD9361 board|**NO** need
- If not successful, check [known issue](doc/known_issue/notter.md)
- Then, run openwifi AP and the on board webserver
```
raspi-config --expand-rootfs (Only needed when your SD card > 16GB. Run and reboot)
./openwifi/setup_once.sh (Only need to run once for new board)
cd openwifi
./wgd.sh