ExternalVendorCode/openofdm
1
0
Fork 0
mirror of https://github.com/jhshi/openofdm.git synced 2024-12-24 07:46:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
7622d7aaa0
openofdm/verilog/dot11_tb.v

528 lines
24 KiB
Coq
Raw Normal View History

Add conditional compiling framework
2022-05-13 11:24:41 +00:00
`include "openofdm_rx_pre_def.v"
verilog init
2017-04-03 16:52:03 +00:00
`timescale 1ns/1ps
module dot11_tb;
`include "common_params.v"
reg clock;
reg reset;
reg enable;
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
reg [10:0] rssi_half_db;
verilog init
2017-04-03 16:52:03 +00:00
reg[31:0] sample_in;
reg sample_in_strobe;
reg [15:0] clk_count;
reg signal_done;
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
wire pkt_header_valid;
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
wire pkt_header_valid_strobe;
verilog init
2017-04-03 16:52:03 +00:00
wire [7:0] byte_out;
wire byte_out_strobe;
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
wire [15:0] byte_count_total;
wire [15:0] byte_count;
wire [15:0] pkt_len_total;
wire [15:0] pkt_len;
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
// wire [63:0] word_out;
// wire word_out_strobe;
verilog init
2017-04-03 16:52:03 +00:00
reg set_stb;
reg [7:0] set_addr;
reg [31:0] set_data;
port dot11 to zynq
2019-12-10 13:09:31 +00:00
wire fcs_out_strobe, fcs_ok;
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
wire demod_is_ongoing;
wire receiver_rst;
wire sig_valid = (pkt_header_valid_strobe&pkt_header_valid);
port dot11 to zynq
2019-12-10 13:09:31 +00:00
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
integer addr;
verilog init
2017-04-03 16:52:03 +00:00
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
// file descriptors
integer sample_file_name_fd;
verilog init
2017-04-03 16:52:03 +00:00
integer bb_sample_fd;
integer power_trigger_fd;
integer short_preamble_detected_fd;
integer long_preamble_detected_fd;
integer sync_long_metric_fd;
integer sync_long_out_fd;
integer demod_out_fd;
provide demod_soft_bits and demod_soft_bits_pos signals out
2022-01-04 21:18:23 +00:00
integer demod_soft_bits_fd;
integer demod_soft_bits_pos_fd;
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
integer deinterleave_erase_out_fd;
verilog init
2017-04-03 16:52:03 +00:00
integer conv_out_fd;
integer descramble_out_fd;
integer signal_fd;
integer byte_out_fd;
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
// sync_short
integer mag_sq_fd;
integer mag_sq_avg_fd;
integer prod_fd;
integer prod_avg_fd;
integer phase_in_fd;
integer phase_out_fd;
integer delay_prod_avg_mag_fd;
// sync_long
integer sum_fd;
integer metric_fd;
integer phase_correction_fd;
integer next_phase_correction_fd;
integer fft_in_fd;
integer fft_out_fd;
// equalizer
integer new_lts_fd;
integer phase_offset_pilot_input_fd;
integer phase_offset_lts_input_fd;
integer phase_offset_pilot_fd;
integer phase_offset_pilot_sum_fd;
integer phase_offset_phase_out_fd;
integer rot_in_fd;
integer rot_out_fd;
integer equalizer_prod_fd;
integer equalizer_prod_scaled_fd;
integer equalizer_mag_sq_fd;
integer equalizer_out_fd;
verilog init
2017-04-03 16:52:03 +00:00
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
// ONLY allow 100(low FPGA), 200(high FPGA), 240(ultra_scal FPGA) and 400(test)
// do NOT turn on more than one of them
`define CLK_SPEED_100M
//`define CLK_SPEED_200M
//`define CLK_SPEED_240M
//`define CLK_SPEED_400M
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/iq_11n_mcs7_gi0_100B_ht_unsupport_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/iq_11n_mcs7_gi0_100B_wrong_ht_sig_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/iq_11n_mcs7_gi0_100B_wrong_sig_openwifi.txt"
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/iq_11n_mcs7_gi0_100B_openwifi.txt"
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/dot11n_6.5mbps_98_5f_d3_c7_06_27_e8_de_27_90_6e_42_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/dot11n_52mbps_98_5f_d3_c7_06_27_e8_de_27_90_6e_42_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/radiated/dot11n_19.5mbps_openwifi.txt"
Add more test vectors into testing_inputs/simulated
2022-03-16 14:07:48 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/dot11n_58.5mbps_98_5f_d3_c7_06_27_e8_de_27_90_6e_42_openwifi.txt"
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/dot11n_65mbps_98_5f_d3_c7_06_27_e8_de_27_90_6e_42_openwifi.txt"
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/dot11a_48mbps_qos_data_e4_90_7e_15_2a_16_e8_de_27_90_6e_42_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/radiated/ack-ok-openwifi.txt"
Add a test vector fake-demod-0.txt that could cause fake demodulation
2022-03-15 14:53:36 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/conducted/fake-demod-0.txt"
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
Add more test vectors into testing_inputs/simulated
2022-03-16 14:07:48 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi1_aggr0_len14_pre100_post200_openwifi.txt"
`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi1_aggr0_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi1_aggr0_len4000_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi0_aggr0_len14_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi0_aggr0_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs7_gi0_aggr0_len4000_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi1_aggr0_len14_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi1_aggr0_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi1_aggr0_len4000_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi0_aggr0_len14_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi0_aggr0_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ht_mcs0_gi0_aggr0_len4000_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_54M_len14_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_54M_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_54M_len4000_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_6M_len14_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_6M_len1537_pre100_post200_openwifi.txt"
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/ag_6M_len4000_pre100_post200_openwifi.txt"
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`define NUM_SAMPLE 118560
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
//`define SAMPLE_FILE "../../../../../testing_inputs/simulated/openofdm_tx/PL_100Bytes/54Mbps.txt"
//`define NUM_SAMPLE 2048
verilog init
2017-04-03 16:52:03 +00:00
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
integer file_i, file_q, file_rssi_half_db, iq_sample_file;
verilog init
2017-04-03 16:52:03 +00:00
initial begin
fix dot11 port pinout
2017-04-21 17:42:09 +00:00
$dumpfile("dot11.vcd");
verilog init
2017-04-03 16:52:03 +00:00
$dumpvars;
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
sample_file_name_fd = $fopen("./sample_file_name.txt", "w");
$fwrite(sample_file_name_fd, "%s", `SAMPLE_FILE);
$fflush(sample_file_name_fd);
$fclose(sample_file_name_fd);
verilog init
2017-04-03 16:52:03 +00:00
clock = 0;
reset = 1;
enable = 0;
signal_done <= 0;
# 20 reset = 0;
enable = 1;
set_stb = 1;
# 20
// do not skip sample
set_addr = SR_SKIP_SAMPLE;
set_data = 0;
# 20 set_stb = 0;
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
end
verilog init
2017-04-03 16:52:03 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
integer file_open_trigger = 0;
always @(posedge clock) begin
file_open_trigger = file_open_trigger + 1;
if (file_open_trigger==1) begin
iq_sample_file = $fopen(`SAMPLE_FILE, "r");
verilog init
2017-04-03 16:52:03 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
bb_sample_fd = $fopen("./sample_in.txt", "w");
power_trigger_fd = $fopen("./power_trigger.txt", "w");
short_preamble_detected_fd = $fopen("./short_preamble_detected.txt", "w");
verilog init
2017-04-03 16:52:03 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
sync_long_metric_fd = $fopen("./sync_long_metric.txt", "w");
long_preamble_detected_fd = $fopen("./sync_long_frame_detected.txt", "w");
sync_long_out_fd = $fopen("./sync_long_out.txt", "w");
verilog init
2017-04-03 16:52:03 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
demod_out_fd = $fopen("./demod_out.txt", "w");
provide demod_soft_bits and demod_soft_bits_pos signals out
2022-01-04 21:18:23 +00:00
demod_soft_bits_fd = $fopen("./demod_soft_bits.txt", "w");
demod_soft_bits_pos_fd = $fopen("./demod_soft_bits_pos.txt", "w");
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
deinterleave_erase_out_fd = $fopen("./deinterleave_erase_out.txt", "w");
conv_out_fd = $fopen("./conv_out.txt", "w");
descramble_out_fd = $fopen("./descramble_out.txt", "w");
verilog init
2017-04-03 16:52:03 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
signal_fd = $fopen("./signal_out.txt", "w");
port dot11 to zynq
2019-12-10 13:09:31 +00:00
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
byte_out_fd = $fopen("./byte_out.txt", "w");
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
// sync_short
mag_sq_fd = $fopen("./mag_sq.txt", "w");
mag_sq_avg_fd = $fopen("./mag_sq_avg.txt", "w");
prod_fd = $fopen("./prod.txt", "w");
prod_avg_fd = $fopen("./prod_avg.txt", "w");
phase_in_fd = $fopen("./phase_in.txt", "w");
phase_out_fd = $fopen("./phase_out.txt", "w");
delay_prod_avg_mag_fd = $fopen("./delay_prod_avg_mag.txt", "w");
// sync_long
sum_fd = $fopen("./sum.txt", "w");
metric_fd = $fopen("./metric.txt", "w");
phase_correction_fd = $fopen("./phase_correction.txt", "w");
next_phase_correction_fd = $fopen("./next_phase_correction.txt", "w");
fft_in_fd = $fopen("./fft_in.txt", "w");
fft_out_fd = $fopen("./fft_out.txt", "w");
// equalizer
new_lts_fd = $fopen("./new_lts.txt", "w");
phase_offset_pilot_input_fd = $fopen("./phase_offset_pilot_input.txt", "w");
phase_offset_lts_input_fd = $fopen("./phase_offset_lts_input.txt", "w");
phase_offset_pilot_fd = $fopen("./phase_offset_pilot.txt", "w");
phase_offset_pilot_sum_fd = $fopen("./phase_offset_pilot_sum.txt", "w");
phase_offset_phase_out_fd = $fopen("./phase_offset_phase_out.txt", "w");
rot_in_fd = $fopen("./rot_in.txt", "w");
rot_out_fd = $fopen("./rot_out.txt", "w");
equalizer_prod_fd = $fopen("./equalizer_prod.txt", "w");
equalizer_prod_scaled_fd = $fopen("./equalizer_prod_scaled.txt", "w");
equalizer_mag_sq_fd = $fopen("./equalizer_mag_sq.txt", "w");
equalizer_out_fd = $fopen("./equalizer_out.txt", "w");
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
end
verilog init
2017-04-03 16:52:03 +00:00
end
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
always begin
`ifdef CLK_SPEED_100M
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
#5 clock = !clock;
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`elsif CLK_SPEED_200M
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
#2.5 clock = !clock;
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`elsif CLK_SPEED_240M
#2.0833333333 clock = !clock;
`elsif CLK_SPEED_400M
#1.25 clock = !clock;
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
`endif
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
end
verilog init
2017-04-03 16:52:03 +00:00
always @(posedge clock) begin
if (reset) begin
sample_in <= 0;
clk_count <= 0;
sample_in_strobe <= 0;
addr <= 0;
end else if (enable) begin
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`ifdef CLK_SPEED_100M
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
if (clk_count == 4) begin // for 100M; 100/20 = 5
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`elsif CLK_SPEED_200M
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
if (clk_count == 9) begin // for 200M; 200/20 = 10
Add more clock cases into dot11_tb.v
2022-01-28 11:17:16 +00:00
`elsif CLK_SPEED_240M
if (clk_count == 11) begin // for 200M; 240/20 = 12
`elsif CLK_SPEED_400M
if (clk_count == 19) begin // for 200M; 400/20 = 20
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
`endif
verilog init
2017-04-03 16:52:03 +00:00
sample_in_strobe <= 1;
extend support to zcu102/Zynq MPSoC ultra_scale
2020-04-27 13:46:16 +00:00
//$fscanf(iq_sample_file, "%d %d %d", file_i, file_q, file_rssi_half_db);
$fscanf(iq_sample_file, "%d %d", file_i, file_q);
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
sample_in[15:0] <= file_q;
sample_in[31:16]<= file_i;
extend support to zcu102/Zynq MPSoC ultra_scale
2020-04-27 13:46:16 +00:00
//rssi_half_db <= file_rssi_half_db;
rssi_half_db <= 0;
verilog init
2017-04-03 16:52:03 +00:00
addr <= addr + 1;
clk_count <= 0;
end else begin
sample_in_strobe <= 0;
clk_count <= clk_count + 1;
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if (dot11_inst.legacy_sig_stb) begin
verilog init
2017-04-03 16:52:03 +00:00
end
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
//if (sample_in_strobe && power_trigger) begin
if (sample_in_strobe) begin
verilog init
2017-04-03 16:52:03 +00:00
$fwrite(bb_sample_fd, "%d %d %d\n", $time/2, $signed(sample_in[31:16]), $signed(sample_in[15:0]));
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
$fwrite(power_trigger_fd, "%d %d\n", $time/2, dot11_inst.power_trigger);
$fwrite(short_preamble_detected_fd, "%d %d\n", $time/2, dot11_inst.short_preamble_detected);
verilog init
2017-04-03 16:52:03 +00:00
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
$fwrite(long_preamble_detected_fd, "%d %d\n", $time/2, dot11_inst.long_preamble_detected);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(bb_sample_fd);
$fflush(power_trigger_fd);
$fflush(short_preamble_detected_fd);
$fflush(long_preamble_detected_fd);
if ((addr % 100) == 0) begin
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
$display("%d", addr);
verilog init
2017-04-03 16:52:03 +00:00
end
if (addr == `NUM_SAMPLE) begin
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
$fclose(iq_sample_file);
$fclose(bb_sample_fd);
$fclose(power_trigger_fd);
$fclose(short_preamble_detected_fd);
$fclose(sync_long_metric_fd);
$fclose(long_preamble_detected_fd);
$fclose(sync_long_out_fd);
$fclose(equalizer_out_fd);
$fclose(demod_out_fd);
provide demod_soft_bits and demod_soft_bits_pos signals out
2022-01-04 21:18:23 +00:00
$fclose(demod_soft_bits_fd);
$fclose(demod_soft_bits_pos_fd);
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
$fclose(deinterleave_erase_out_fd);
$fclose(conv_out_fd);
$fclose(descramble_out_fd);
$fclose(signal_fd);
$fclose(byte_out_fd);
verilog init
2017-04-03 16:52:03 +00:00
$finish;
end
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if (dot11_inst.sync_long_inst.metric_stb) begin
$fwrite(sync_long_metric_fd, "%d %d\n", $time/2, dot11_inst.sync_long_inst.metric);
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
$fflush(sync_long_metric_fd);
verilog init
2017-04-03 16:52:03 +00:00
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if (dot11_inst.sync_long_inst.sample_out_strobe) begin
$fwrite(sync_long_out_fd, "%d %d\n", $signed(dot11_inst.sync_long_inst.sample_out[31:16]), $signed(dot11_inst.sync_long_inst.sample_out[15:0]));
verilog init
2017-04-03 16:52:03 +00:00
$fflush(sync_long_out_fd);
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
// if (dot11_inst.equalizer_inst.sample_out_strobe) begin
// $fwrite(equalizer_out_fd, "%d %d\n", $signed(dot11_inst.equalizer_inst.sample_out[31:16]), $signed(dot11_inst.equalizer_inst.sample_out[15:0]));
// $fflush(equalizer_out_fd);
// end
verilog init
2017-04-03 16:52:03 +00:00
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if (dot11_inst.legacy_sig_stb) begin
verilog init
2017-04-03 16:52:03 +00:00
signal_done <= 1;
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
$fwrite(signal_fd, "%04b %b %012b %b %06b", dot11_inst.legacy_rate, dot11_inst.legacy_sig_rsvd, dot11_inst.legacy_len, dot11_inst.legacy_sig_parity, dot11_inst.legacy_sig_tail);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(signal_fd);
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if ((dot11_inst.state == S_MPDU_DELIM || dot11_inst.state == S_DECODE_DATA || dot11_inst.state == S_MPDU_PAD) && dot11_inst.ofdm_decoder_inst.demod_out_strobe) begin
$fwrite(demod_out_fd, "%b %b %b %b %b %b\n",dot11_inst.ofdm_decoder_inst.demod_out[0],dot11_inst.ofdm_decoder_inst.demod_out[1],dot11_inst.ofdm_decoder_inst.demod_out[2],dot11_inst.ofdm_decoder_inst.demod_out[3],dot11_inst.ofdm_decoder_inst.demod_out[4],dot11_inst.ofdm_decoder_inst.demod_out[5]);
$fwrite(demod_soft_bits_fd, "%b %b %b %b %b %b\n",dot11_inst.ofdm_decoder_inst.demod_soft_bits[0],dot11_inst.ofdm_decoder_inst.demod_soft_bits[1],dot11_inst.ofdm_decoder_inst.demod_soft_bits[2],dot11_inst.ofdm_decoder_inst.demod_soft_bits[3],dot11_inst.ofdm_decoder_inst.demod_soft_bits[4],dot11_inst.ofdm_decoder_inst.demod_soft_bits[5]);
$fwrite(demod_soft_bits_pos_fd, "%b %b %b %b\n",dot11_inst.ofdm_decoder_inst.demod_soft_bits_pos[0],dot11_inst.ofdm_decoder_inst.demod_soft_bits_pos[1],dot11_inst.ofdm_decoder_inst.demod_soft_bits_pos[2],dot11_inst.ofdm_decoder_inst.demod_soft_bits_pos[3]);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(demod_out_fd);
provide demod_soft_bits and demod_soft_bits_pos signals out
2022-01-04 21:18:23 +00:00
$fflush(demod_soft_bits_fd);
$fflush(demod_soft_bits_pos_fd);
verilog init
2017-04-03 16:52:03 +00:00
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if ((dot11_inst.state == S_MPDU_DELIM || dot11_inst.state == S_DECODE_DATA || dot11_inst.state == S_MPDU_PAD) && dot11_inst.deinterleave_erase_out_strobe) begin
$fwrite(deinterleave_erase_out_fd, "%b %b %b %b %b %b %b %b\n", dot11_inst.deinterleave_erase_out[0], dot11_inst.deinterleave_erase_out[1], dot11_inst.deinterleave_erase_out[2], dot11_inst.deinterleave_erase_out[3], dot11_inst.deinterleave_erase_out[4], dot11_inst.deinterleave_erase_out[5], dot11_inst.deinterleave_erase_out[6], dot11_inst.deinterleave_erase_out[7]);
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
$fflush(deinterleave_erase_out_fd);
verilog init
2017-04-03 16:52:03 +00:00
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if ((dot11_inst.state == S_MPDU_DELIM || dot11_inst.state == S_DECODE_DATA || dot11_inst.state == S_MPDU_PAD) && dot11_inst.conv_decoder_out_stb) begin
$fwrite(conv_out_fd, "%b\n", dot11_inst.conv_decoder_out);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(conv_out_fd);
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if ((dot11_inst.state == S_MPDU_DELIM || dot11_inst.state == S_DECODE_DATA || dot11_inst.state == S_MPDU_PAD) && dot11_inst.descramble_out_strobe) begin
$fwrite(descramble_out_fd, "%b\n", dot11_inst.descramble_out);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(descramble_out_fd);
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
if ((dot11_inst.state == S_MPDU_DELIM || dot11_inst.state == S_DECODE_DATA || dot11_inst.state == S_MPDU_PAD) && dot11_inst.byte_out_strobe) begin
$fwrite(byte_out_fd, "%02x\n", dot11_inst.byte_out);
verilog init
2017-04-03 16:52:03 +00:00
$fflush(byte_out_fd);
end
Move all signal logging to dot11_tb.v
2022-05-16 07:33:19 +00:00
// sync_short
if (dot11_inst.sync_short_inst.mag_sq_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(mag_sq_fd, "%d\n", dot11_inst.sync_short_inst.mag_sq);
$fflush(mag_sq_fd);
end
if (dot11_inst.sync_short_inst.mag_sq_avg_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(mag_sq_avg_fd, "%d\n", dot11_inst.sync_short_inst.mag_sq_avg);
$fflush(mag_sq_avg_fd);
end
if (dot11_inst.sync_short_inst.prod_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(prod_fd, "%d %d\n", dot11_inst.sync_short_inst.prod[63:32], dot11_inst.sync_short_inst.prod[31:0]);
$fflush(prod_fd);
end
if (dot11_inst.sync_short_inst.prod_avg_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(prod_avg_fd, "%d %d\n", dot11_inst.sync_short_inst.prod_avg[63:32], dot11_inst.sync_short_inst.prod_avg[31:0]);
$fflush(prod_avg_fd);
end
if (dot11_inst.sync_short_inst.phase_in_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(phase_in_fd, "%d %d\n", dot11_inst.sync_short_inst.phase_in_i, dot11_inst.sync_short_inst.phase_in_q);
$fflush(phase_in_fd);
end
if (dot11_inst.sync_short_inst.phase_out_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(phase_out_fd, "%d\n", $signed(dot11_inst.sync_short_inst.phase_out));
$fflush(phase_out_fd);
end
if (dot11_inst.sync_short_inst.delay_prod_avg_mag_stb && dot11_inst.sync_short_inst.enable && ~dot11_inst.sync_short_inst.reset) begin
$fwrite(delay_prod_avg_mag_fd, "%d\n", dot11_inst.sync_short_inst.delay_prod_avg_mag);
$fflush(delay_prod_avg_mag_fd);
end
// sync_long
if (dot11_inst.sync_long_inst.sum_stb && dot11_inst.sync_long_inst.enable && ~dot11_inst.sync_long_inst.reset) begin
$fwrite(sum_fd, "%d %d\n", dot11_inst.sync_long_inst.sum_i, dot11_inst.sync_long_inst.sum_q);
$fflush(sum_fd);
end
if (dot11_inst.sync_long_inst.metric_stb && dot11_inst.sync_long_inst.enable && ~dot11_inst.sync_long_inst.reset) begin
$fwrite(metric_fd, "%d\n", dot11_inst.sync_long_inst.metric);
$fflush(metric_fd);
end
if (dot11_inst.sync_long_inst.raw_stb && dot11_inst.sync_long_inst.enable && ~dot11_inst.sync_long_inst.reset) begin
$fwrite(phase_correction_fd, "%d\n", dot11_inst.sync_long_inst.phase_correction);
$fflush(phase_correction_fd);
$fwrite(next_phase_correction_fd, "%d\n", dot11_inst.sync_long_inst.next_phase_correction);
$fflush(next_phase_correction_fd);
end
if (dot11_inst.sync_long_inst.fft_in_stb && dot11_inst.sync_long_inst.enable && ~dot11_inst.sync_long_inst.reset) begin
$fwrite(fft_in_fd, "%d %d\n", dot11_inst.sync_long_inst.fft_in_re, dot11_inst.sync_long_inst.fft_in_im);
$fflush(fft_in_fd);
end
if (dot11_inst.sync_long_inst.fft_valid && dot11_inst.sync_long_inst.enable && ~dot11_inst.sync_long_inst.reset) begin
$fwrite(fft_out_fd, "%d %d\n", $signed(dot11_inst.sync_long_inst.fft_out_re[22:7]), $signed(dot11_inst.sync_long_inst.fft_out_im[22:7]));
$fflush(fft_out_fd);
end
// equalizer
if ((dot11_inst.equalizer_inst.num_ofdm_sym == 1 || (dot11_inst.equalizer_inst.pkt_ht==1 && dot11_inst.equalizer_inst.num_ofdm_sym==5)) && dot11_inst.equalizer_inst.state == dot11_inst.equalizer_inst.S_CALC_FREQ_OFFSET && dot11_inst.equalizer_inst.sample_in_strobe_dly == 1 && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(new_lts_fd, "%d %d\n", dot11_inst.equalizer_inst.lts_i_out, dot11_inst.equalizer_inst.lts_q_out);
$fflush(new_lts_fd);
end
if (dot11_inst.equalizer_inst.pilot_in_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(phase_offset_pilot_input_fd, "%d %d\n", dot11_inst.equalizer_inst.input_i, dot11_inst.equalizer_inst.input_q);
$fflush(phase_offset_pilot_input_fd);
$fwrite(phase_offset_lts_input_fd, "%d %d\n", dot11_inst.equalizer_inst.lts_i_out, dot11_inst.equalizer_inst.lts_q_out);
$fflush(phase_offset_lts_input_fd);
end
if (dot11_inst.equalizer_inst.pilot_out_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(phase_offset_pilot_fd, "%d %d\n", dot11_inst.equalizer_inst.pilot_i, dot11_inst.equalizer_inst.pilot_q);
$fflush(phase_offset_pilot_fd);
end
if (dot11_inst.equalizer_inst.phase_in_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(phase_offset_pilot_sum_fd, "%d %d\n", dot11_inst.equalizer_inst.pilot_sum_i, dot11_inst.equalizer_inst.pilot_sum_q);
$fflush(phase_offset_pilot_sum_fd);
end
if (dot11_inst.equalizer_inst.phase_out_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(phase_offset_phase_out_fd, "%d\n", $signed(dot11_inst.equalizer_inst.phase_out));
$fflush(phase_offset_phase_out_fd);
end
if (dot11_inst.equalizer_inst.rot_in_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(rot_in_fd, "%d %d %d\n", $signed(dot11_inst.equalizer_inst.buf_i_out), $signed(dot11_inst.equalizer_inst.buf_q_out), $signed(dot11_inst.equalizer_inst.sym_phase));
$fflush(rot_in_fd);
end
if (dot11_inst.equalizer_inst.rot_out_stb && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(rot_out_fd, "%d %d\n", dot11_inst.equalizer_inst.rot_i, dot11_inst.equalizer_inst.rot_q);
$fflush(rot_out_fd);
end
if (dot11_inst.equalizer_inst.prod_out_strobe && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(equalizer_prod_fd, "%d %d\n", $signed(dot11_inst.equalizer_inst.prod_i), $signed(dot11_inst.equalizer_inst.prod_q));
$fflush(equalizer_prod_fd);
$fwrite(equalizer_prod_scaled_fd, "%d %d\n", $signed(dot11_inst.equalizer_inst.prod_i_scaled), $signed(dot11_inst.equalizer_inst.prod_q_scaled));
$fflush(equalizer_prod_scaled_fd);
$fwrite(equalizer_mag_sq_fd, "%d\n", dot11_inst.equalizer_inst.mag_sq);
$fflush(equalizer_mag_sq_fd);
end
if (dot11_inst.equalizer_inst.sample_out_strobe && dot11_inst.equalizer_inst.enable && ~dot11_inst.equalizer_inst.reset) begin
$fwrite(equalizer_out_fd, "%d %d\n", $signed(dot11_inst.equalizer_inst.sample_out[31:16]), $signed(dot11_inst.equalizer_inst.sample_out[15:0]));
$fflush(equalizer_out_fd);
end
verilog init
2017-04-03 16:52:03 +00:00
end
end
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
signal_watchdog signal_watchdog_inst (
.clk(clock),
.rstn(~reset),
.enable(~demod_is_ongoing),
.i_data(sample_in[31:16]),
.q_data(sample_in[15:0]),
.iq_valid(sample_in_strobe),
.signal_len(pkt_len),
.sig_valid(sig_valid),
Disable signal watch dog for normal simulation in the tb
2022-05-16 07:51:30 +00:00
.max_signal_len_th(16'hFFFF),
.dc_running_sum_th(65),
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
.receiver_rst(receiver_rst)
);
verilog init
2017-04-03 16:52:03 +00:00
dot11 dot11_inst (
.clock(clock),
.enable(enable),
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
.reset(reset|receiver_rst),
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
port dot11 to zynq
2019-12-10 13:09:31 +00:00
//.set_stb(set_stb),
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
//.set_addr(set_addr),
port dot11 to zynq
2019-12-10 13:09:31 +00:00
//.set_data(set_data),
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
.power_thres(11'd0),
port dot11 to zynq
2019-12-10 13:09:31 +00:00
.min_plateau(32'd100),
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
.rssi_half_db(rssi_half_db),
.sample_in(sample_in),
.sample_in_strobe(sample_in_strobe),
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
.soft_decoding(1'b1),
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
Add signal_watchdog module to prevent fake demod in early phase: 1. If strong DC or low frequency sing wave like signal (suspect it is generated by ad9361 during some self-calibration like operation), put the receiver into reset 2. If the signal/header is valid, but the packet length is abnormal (signal_len<14 || signal_len>max_signal_len_th), reset the receiver
2022-03-15 15:03:40 +00:00
.demod_is_ongoing(demod_is_ongoing),
.pkt_header_valid(pkt_header_valid),
output information for openwifi side channel feature: capture timestamp, frequency offset, channel state information and equalizer constellation to Linux
2020-10-08 08:06:03 +00:00
.pkt_header_valid_strobe(pkt_header_valid_strobe),
Connect pkt_len from dot11 to signal watch dog in the tb
2022-05-16 07:51:01 +00:00
.pkt_len(pkt_len)
verilog init
2017-04-03 16:52:03 +00:00
);
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
/*
necessary bug fixes and improvements for openwifi
2019-12-10 12:31:16 +00:00
byte_to_word_fcs_sn_insert byte_to_word_fcs_sn_insert_inst (
.clk(clock),
.rstn((~reset)&(~pkt_header_valid_strobe)),
.byte_in(byte_out),
.byte_in_strobe(byte_out_strobe),
.byte_count(byte_count),
.num_byte(pkt_len),
.fcs_in_strobe(fcs_out_strobe),
.fcs_ok(fcs_ok),
.rx_pkt_sn_plus_one(0),
.word_out(word_out),
.word_out_strobe(word_out_strobe)
);
make the code more testbench friendly
2020-09-02 19:59:37 +00:00
*/
verilog init
2017-04-03 16:52:03 +00:00
endmodule
Reference in New Issue Copy Permalink