Reintroduce:
USB Attached SCSI devices might expose a bulk-only interface
as fall-back at interface 0 and alternate setting 0. This commit
allows for probing all alternate settings of the active interface
to be able to use such devices.
The configuration was extended so that in case the device interface
is known beforehand the driver can be configured accordingly.
Additionally:
Perform configuration reset upon sessions close in order to bring USB
device to a well defined state.
fixes#4494
The NOVA kernel and Genode's roottask core are configured to be runnable
with up to 64 CPUs (MAX_SUPPORTED_CPUS in core resp. NUM_CPU in kernel).
On machines with more CPUs a reset occurred. The commit checks for this
case, bootstraps the first 64 CPUs only, and sends all other CPUs to
sleep.
Also, the platform_info ROM size is increased to host information about
more than 32 CPUs.
Issue #4640
If `select_from_ports` is evaluated lazily, we might miss a port during
the dependency check. A way to prevent this is to use the `:=` operator.
Fixesgenodelabs/genode#4618
Implement the guest code in dedicated assembler source file, assemble
and link the binary to vmm_x86. The resulting guest-code binary
populates one page that is mapped to host the reset vector of the guest.
This approach simplifies future guest code adaption resp. extension,
e.g., to test rdmsr/wrmsr exiting.
Fixes#4638
plain_decorator_theme.tar is not linked to the app but must be generated
as side effect. Therefore, use CUSTOM_TARGET_DEPS to trigger the
generation.
Fixes#4637
This reverts commit 9a37ccfe29 except for the
new declarations in public headers (in order to not change any APIs again).
We revert the commit as we found that there are corner cases in which it
produces a bad UDP checksum. The bad UDP checksum was observed via Wireshark at
a TFTP server in a Sculpt 22.10 Debian 11 VM on the first request of fetching a
file with the TFTP client of the uboot on our iMX8 test board.
Ref #4636
According to OpenBSD's azalia driver some AMD HDAudio devices do not
play nice with MSIs although the capability is set. At least the
0x1457 device was tested and worked using GSIs only.
genodelabs/genode#4578
During initialization _handle_link_state may be called concurrently from EMT and
"nic_ep" (signal handler). Therefore, sent signal to "nic_ep" instead of calling
_handle_link_state from EMT thread.
issue #4632
Some DHCP clients (Debian VM in Sculpt) persistently store the last lease they
obtained and try to directly DHCP REQUEST it on a new startup whithout doing
DHCP DISCOVER beforehand. In case the NIC router doesn't know about the lease
anymore (timeout, new router instance), the router used to just ignore the DHCP
REQUEST. This led to significant delays in the network startup of the client
(delayed retries until give-up and DHCP DISCOVER). With this commit, the router
answers such packets with a DHCP NAK instead, causing the client to directly
switch to DHCP DISCOVER.
Fixes#4634
This patch removes the intermediate querying of the depot while the
installation of packages is in progress. This avoids misleading warning
messages and reduces superfluous file-system load during the
installation of large packages.
Issue #4631
On-demand initialization prevents read-write operations on BARs of
invalid devices at construction time, which may result in surprising
behavior later on, for example, when resetting X260 notebooks via ACPI
information.
These utilities simplify the control of clocks, resets, and power
domains from within the platform driver.
This is needed when driving a low-level device directly from the
platform driver, for example for driving the mbox mechanism to access
the system-control processor of the PinePhone.
This patch reflects both the pci_decode results and the platform
driver's aggregated device information in Sculpt's /report/drivers/ in
the form of pci_devices and devices files respectively.
The configured 'st_blksize' influences the sizing of the FILE buffer,
see '__swhatbuf()'. Increasing the blksize hint can lead to larger
'fread()' requests and in return to fewer roundtrips.
This commit updates the driver from version 6.6 to 7.1. In contrast
to the old driver the new one will now probe all available HDA devices
and will drive the first usable one, e.g.:
```
[init -> audio_drv] azalia0 [8086:160c]
[init -> audio_drv] :
[init -> audio_drv] azalia0: no supported codecs
[init -> audio_drv] azalia1 [8086:9ca0]
[init -> audio_drv] :
[init -> audio_drv] azalia1: codecs: Realtek ALC292
[init -> audio_drv] audio0 at azalia1
```
Fixes#4629.
Implemented as depicted in the OpenBSD driver, register description
found in 'AMD SB700/710/750 Register Reference Guide'
(43009_sb7xx_rrg_pub_1.00.pdf).
Issue #4629.
Instead of using a global value to enumerate the MSIs, use a function argument
instead. Whenever the process of PCI device reporting gets started again,
due to an initially too small report buffer, the MSI enumeration value is reset
again. Formerly, we wasted MSI numbers.
Ref genodelabs/genode#4628
Don't skip IRQ reporting if legacy IRQ/GSIs are not supported as the
device may support MSI/MSI-X exclusively.
The commit also enables reserved_memory reporting of devices without
IRQs.
Ref genodelabs/genode#4578
Until now, the /config/system ROM was not handled by the sculpt manager
but solely managed by the user. Its main purpose was the ability to
reset or power-down the machine by manually modifying the 'state'
attribute. However, down the road, we'd like to enable the sculpt
manager to drive this state, e.g., to implement the multi-staged
loading of drivers, or to drive suspend-resume states.
The support such scenarios, the 'system' state has been moved from
/config/system to /config/managed/system.
* Add EHCI PCI quirk
* Add UHCI reset to UHCI quirk
* Apply all PCI quirks in order of the PCI bus numbering
otherwise the machine might stall
Ref genodelabs/genode#4578
Instead of allowing the client to set a caching attribute
in the io_mem() call of the device interface, which was
only used to decide in between of the memory being
write-combined or not, remove it from the API.
Instead use the information delivered by the devices ROM,
whether memory from a PCI BAR is prefetchable or not,
to decide whether it is mapped write-combined or not.
Ref genodelabs/genode#4578
Memory descriptors in PCI BARs have a prefetchable bit, which can
be used to optimize memory access when setting, e.g. write-combined
in page-table entries.
Ref genodelabs/genode#4578
The DHCP client used to always send packets with a size of 1024 regardless of
the size of the actual content, which was always significantly lower. 1024
bytes was simply a guess to provide enough space for all types of DHCP client
packets. As we know the exact size of each packet the DHCP client sends even
before packet creation, this commit makes use of the knowledge resulting in
much smaller packets sent by the DHCP client.
Fixes#4619
On some Cortex A9 platforms (Qemu 4.2.1 PBXA9), the IRQ status register is not
reliable. Sometimes, it indicates an IRQ too early, i.e., shortly before the
counter wraps. Therefore we have to accomplish wrap detection via counter
comparison only. We check whether the current counter value is higher than the
start counter value of the current timeout.
However, this implies that we have to take care to always read out the counter
before it hits the max timout value again. And, therefore, the max timeout
value has to be far away from the first value the counter has after wrapping.
Consequently, we propagate a max timeout value of half the max counter value.
Fixes#4209
* Remove wrapper for legacy x86 platform API
* Move PCI configuration space quirks to corresponding driver
(pc_usb_host_drv, pc_wifi_drv, pc_intel_fb_drv)
* Adapt driver test run-scripts to changed configuration
Ref genodelabs/genode#4578
Consumes the information about reserved memory region reports from
the devices ROM, and adds appropriated mappings to the corresponding
device PD.
Ref genodelabs/genode#4578
We need the information about reserved memory region reports
from the ACPI tables within the platform driver to pre-fill
IOMMU tables with the corresponding mappings. Therefore,
the pci_decode component now parses the information from the
ACPI ROM, and adds "reserved_memory" nodes to all related
devices in the devices report.
Ref genodelabs/genode#4578
In case of the GPU multiplexer, we need to delegate MMIO memory
to the framebuffer client in form of a managed dataspace. To be
able to attach a given Platform::Device::Mmio object to a region map
we need to access its capability.
Ref genodelabs/genode#4578
* Modernize routines, eliminate pointers, use constructibles, etc.
* Use absolute time instead of relative time consumption when
updating the scheduler
Ref genodelabs/genode#4151
This commit fixes two issues with the timeout lib and the base-hw src recipe:
* Add source files of timeout lib to recipe content.
The files weren't copied to the depot until now. However, the archive
nonetheless built successfully because of the second issue that is described
below.
* Get rid of the usage of the BASE_DIR variable in the timeout lib.
The BASE_DIR variable always resolves to the repos/base directory even when
building in a depot. That said, the use of BASE_DIR in make-files that are
not part of the build system itself must be avoided. Instead, REP_DIR,
REP_INC_DIR, and $(call select_from_repositories, ...) should be used.
Ref #4209
This commit gets rid of the router-local wrapper of Genode's AVL string tree
and replaces it with Genode's new Dictionary structure. The Dictionary is now
used for managing domains and NIC clients. Due to this change, the formerly
necessary helper classes Domain_base and Nic_client_base could be removed as
well.
Ref #4610
When creating an Irq connection to a component (not core), e.g. a pin
driver, we typically need a to provide a session label in order to apply
a session policy and to distinguish multiple sessions from the same
component.
genodelabs/genode#4606
This is a follow-up commit for "menu_view: configurable alpha channel
and bg color", which simplifies the code. The '_no_alpha' surface is not
needed because the 'Gui_buffer' provides a 0x0 alpha surface when using
the opaque mode.
The default file-system communication-buffer size of 128 KiB combined
with the clamping of requests to 1/4th the buffer size results in the
fragementation of read operations into 32 KiB chunks. This is overly
conservative and causes high context-switch overhead down the storage
stack (vfs server -> part_block -> block driver).
Related to #4613
With the increase of MAXPHYS, the rump kernel requests a contiguous
allocation of 2101248 bytes, which exceeds the allocator's block size of
2 MiB.
Error: backend allocator: Unable to allocate memory (size: 2101248 align: 12)
The patch avoids this corner case by increasing the allocator's block
size to 4 MiB.
Fixes#4613
The NIC router README claims that the 'dns_config_from' attribute in a DHCP
server configuration binds the propagated link state of all interfaces at the
domain of the server to the validity of the IP config of the domain that is
given through 'dns_config_from'.
However, this was not true. The router missed to implement this detail which
led to clients of such a DHCP server sending DHCP DISCOVER packets too early.
These early DHCP DISCOVER packets were dropped by the router potentially
causing a big delay until the client started a new attempt. Unnecessary long
network boot-up delays were observed with at least the lwip run script and
Sculpt on the PinePhone and could be tracked down to this former
inconsistency in the router.
This commit fixes the inconsistency.
Fixes#4612
This patch changes the access of pkg-archives files such that the file
read only once per pkg, not for each ROM module used by the package.
Issue #4611
By caching directory listings, the performance of depot_query is no
longer impeded by a massive amount of stat calls while searching for ROM
module locations.
Issue #4611
Upon closer inspection of real-world access patterns, it turns out that
the 'Stat_cache' and 'Cached_rom_query' are not as effective as hoped
for because cache hits are rare while querying pkg blueprints.
However, by increasing the initial size of the blueprint reporter from 4
KiB (default) to 64 KiB has a great effect. With the small default
report size, the querying of blueprints is repeated until the buffer
size suffices, incrementing the buffer size by 4 KiB in each iteration.
Issue #4611
The new 'Dictionary' provides an easy way to access objects using
strings as key. The 'String' received the 'operator >' to simplify the
organization of strings in an AVL tree.
The patch removes the former definition of the 'operator >' from the
platform driver because it would be ambigious now.
Fixes#4610
This patch avoids repetitive depot queries at the start of the Sculpt
system.
We don't need to trigger a query unconditionally whenever the
managed/deploy changes because the call of 'handle_deploy' triggers a
query when needed.
We don't need to trigger a query once the prepare step is completed
because the depot_query component is spawned at this point. The initial
blueprint produced by the depot_query component, in turn, triggers the
'handle_deploy' mechanics in the sculpt manager.
The constructor of the Sculpt manager's 'Main' does not need to call
'depot_deploy' because the prepare step - which is a precondition for
the deployment - cannot be completed at this point anyway.
Do not advance ring buffer positions when playing silence, additionally
to not send progress signals when playing silence. Silence implies
underrun in the client side - not progress.
issue #4609
In case a driver is waiting for data, is should only investigate 'pos'.
It should not advance the ring in any way until there is data available.
issue #4609
This patch consolidates the repetitive error handling across the RPC
functions, which take node handles or directory handles as arguments.
During this change, I noticed that directory handles - which are values
provided by the client - were not checked for their type before being
used. A misbehaving client may open a file, manually construct a
directory handle using the number of the file handle, and invoke a
directory operation at lx_fs, which would then wrongly access a file
node as directory node.
This patch solves this issue by introducing two distinct methods
_with_open_node and _with_open_dir_node, which perform the respective
safety checks.
Fixes#4608
Creating and destructing an interface was not considered a change of its real
link state as defined in the description of the <report link_state_triggers="">
config attribute in the router's README. In case of Uplink sessions this is
obviously a problem as they communicate their real link state through session
lifetime. But also in case of NIC sessions it's a possible to create an
interface that is immediately "up" after creation or destruct an interface
without its link state going "down" beforehand.
Taking into account also the practical application of the
<report link_state_triggers=""> attribute, reporting only on destruction and
construction of interfaces that are "up" seems shorthanded. This is because a
report-receiver most likely needs to be able to synchronize the lifetime of
the objects that keep track of the link states with the lifetime of the
corresponding sessions.
That said, with this commit, the router triggers a report update on each
session construction/destruction when <report link_state_triggers=""> is
set.
Fixes#4462
The NIC router used to generate reports triggered by IP config changes or link
state changes synchonously, i.e., inline with the activation context that
caused the change. This has two disadvantages. First, it can lead to an
excessive number of report updates in situations with quick bursts of
triggering changes. In such situations it is preferable to collect the changes
and reflect them with only one final report update.
Second, synchronous reporting may happen while the router is in a state that
leads to an incorrect report (e.g. during reconfiguration). To prevent this
from happening, the router so far explicitely switched off reporting when
entering incoherent states and back on when leaving them. However, this
solution is error-prone as the exclusion windows must be maintained manually.
Both issues can be solved by not directly generating a report when necessary
but instead submitting a signal and letting the signal handler do the work in
a dedicated activation context.
Ref #4462
This patch splits the querying of the number of directory entries from
the directory's 'status' information. Subsuming the number of directory
entries as part of the status makes 'stat' calls too costly for some
file systems that need to read a directory for determining the number of
entries. So when stat'ing the entries of one directory that contains sub
directories, all entries of each sub directory are visited.
Thanks to Cedric Degea for pointing out this performance bottleneck!
With this change, the 'status' function returns a 'Status::size' value
of 0 when called for a directory handle.
Fixes#4603
This patch splits the former DEPOT=omit option into two variants.
The new 'list' option behaves like the former 'omit' option, skipping
the creation of the tar archive from the depot content referenced by the
deploy configuration but showing a list of depot archives that need to
be published for the deployment.
When specifying 'omit' in th new version, the local depot is not queried
for the packages referenced in the deploy configuration. So the
deployment can refer to packaged hosted only remotely.
Fixes#4605
Tracing must be inhibited in attach/detach as RPC trace points may
trigger attachment of trace dataspaces, which would result in nested
mutex acquisition.
This prevents errors in test-trace_logger like follows.
[init -> depot_autopilot] 0.140 [init -> dynamic_rom] Error: deadlock ahead, mutex=0x500e6f00, return ip=0x50053ed7
Fixes#4607
The DHCP client of the NIC router used to end up in an uncaught exception if
an IP address in the DNS server option of a DHCP ACK was invalid. This commit
makes the 'Dns_server' constructor (where the exception originated from)
private and instead introduces a public lambda method 'construct' that calls
one lambda argument on success and another on failure. This is also in line
with the most recent changes to the 'find_by_*' methods of other classes in
the NIC router and contributes to the goal of reducing expensive exception
handling.
Fixes#4465
The Interface class of the router is an abstraction for NIC client sessions,
NIC server sessions, and Uplink sessions. Nonetheless, Interface generally used
to use the packet stream types of the Nic namespace and it worked because the
Uplink packet stream types are factually the same (the are typedef'd from the
same base type templates with the same parameters).
The initial intention of this issue was to remove dependency on the diverse
packet stream stream types from Interface. However, this turned out to be more
tricky than thought. The Interface class calls function templates on the packet
stream types, making a generic virtual interface impossible. And moving the
calling code to the session classes as well would produce a lot of redundancy.
Therefore, this commit removes only the use of the Nic namespace in the
interface.* files by typedef'ing the packet stream types from the generic
Genode type templates with the same parameters as in Nic and Uplink.
Fixes#4385
The libc kernel used to silently go on if one of the files given through
stdin/stdout/stderr or <fd path=""> was missing (with possibly vital
functionality for the component not working). A pointer to the presumably
simple configuration issue of the underlying scenario was not given to the
user.
With this commit, the libc kernel prints a descriptive warning before
proceeding with the invalid file descriptor
Fixes#4218
The libc kernel used to end up in an uncaught exception if one of the
directories in the paths given through stdin/stdout/stderr or <fd path=""> was
missing. The resulting error didn't point the user to the presumably simple
configuration issue of his scenario in any way and killed the affected
component.
With this commit, the libc kernel prints a descriptive warning instead and
simply continues to run the component with the corresponding file descriptor
missing. At least in case of stdin/stdout/stderr, the libc deals gracefully
with this approach.
Ref #4218
If provided with a config that does not include a `<static>` or
`<common_routes>` node, depot_deploy exits due to a `Nonexistent_sub_node`
exception. Instead, we should output a more useful warning.
Fixesgenodelabs/genode#4600
The `with_sub_node` method is renamed to `with_optional_sub_node` to
better reflect that the non-existence of a sub node with the desired type is
ignored.
At the same time, the new `with_sub_node` now takes a second functor that is
called when no sub node of the desired type exists.
genodelabs/genode#4600
This patch refines the rules for generating a base-hw src archive
for a given board by enumerating the content of the lib/mk/spec/*
directories instead of including entire directories. This avoids
the inclusion of lib.mk files found in SoC-specific repositories
(like genode-allwinner) in the kernel source archives.
When building a binary archive from such a src archive with the changes
of issue #4599, the build system would otherwise try (and fail) to build
the libraries for the accidentally included lib.mk files.
