Triggered by the toolchain update to GCC 12 certain pragmas lead to
a build error as those are now unknown. As quick-fix add '-gnatwG',
which suppresses warnings on unrecognized pragmas.
Issue #4880.
Apparently we need to save the floating point arguments when entering
the linker in case "-fno-tree-vectorize" is at work. Otherwise this
registers get corrupted during jump slot relocation.
Fixes#4879
Eliminate the creation of 'Genode::String's before the linker has been
self relocated, because 'Genode::String's will call 'Genode::strlen' on
construction from C-Strings, which has now become a GOT relative call,
while the GOT contains only zeros before relocation -> page fault at
IP 0.
fixes#4867
related to #4827
error: 'void operator delete(void*, Genode::Deallocator&)' called on pointer returned from a mismatched allocation function [-Werror=mismatched-new-delete]
Issue #4827Fixes#4850
The new 'init_platform' function performs the platform-specific
component-local low-level initialization. It allows for the
differentiation between core and regular components as well as
kernel-dependent peculiarities.
This patch introduces a consistent notion of a 'Platform'. Within core,
the 'Platform' contains the kernel-specific initialization. Outside
core, the platform sets up the interplay with the parent component. In
all cases, the platform is constructed while running on the initial
stack.
Issue #4784
This patch ultimatedly removes format strings from Genode's base API.
Users of the former base/snprintf.h and base/console.h headers may
use the free-standing 'format' library hosted in the ports repository.
Fixes#2064Fixes#3869
The new 'Connection' constructor accepts the session label, affinity,
and args as constructor arguments. The session arguments are passed as a
'Genode::String'. This allows for side-stepping the need for rendering a
format string passed to 'Env::session'.
Issue #2064
The namespace draws a clear line between the base library and the core
component.
It is declared at the new core-local header <types.h>, which is expected
to be included by all code of the core component. It is thereby a
natural place for kernel-agnostic general types like commonly used C++
utilities.
Fixes#4777
Segment assignment stays valid for all sections following .dynamic,
which implies that .got and co also end up in the PT_DYNAMIC segment.
This is not intended. Therefore, we move the .dynamic section before
bss and assign bss to the rw PT_LOAD segment only.
fixes#4750
The leading newline in the _capture function confused _filecontent,
which resulted in empty port hashes.
Fixes regression introduced in 437fd21ba0
(issue #4725).
Information about PS/2 and PIT where moved to app/pci_decode in the
following commit.
pci_decode: report devices from ACPI info
We still provide an empty <devices> node as the file itself is used by
platform agnostic run scripts.
Some signal-heavy scenarios (e.g., libc_integration) produced the
following warning that hinted a data race on signal data in the context
object.
Warning: returning signal with num == 0
The cause was the use of Signal_context::local_submit() in the libc
introduced in
424ed1b79a libc: remove Reconstructible / use local_submit in kernel
in combination with a missing context-mutex aquisition resulting in a
data race on Signal_context::_curr_signal.
Issue #3923
This prevents errors like the following during parallel builds.
MERGE ld-hw.abi.so
/usr/local/genode/tool/21.05/bin/genode-arm-ld:symbol.map:0: syntax error in VERSION script
Try to allocate within constraint area first. In case the area is exhausted,
try allocation at other memory locations.
The motivation for this is to limit DMA allocations to 4GB (since some
devices require addresses below 4GB). On some platforms there is little
physical RAM in this area (<1GB) and the constrainted area exhausts. In
case an IOMMU is present, RAM at higher locations can still be mapped
below 4GB, which is done in the platform drivers.
issue #4665
With "grub2: update to newer grub2 2.06 version" a regression slipped in
which makes the ISO not bootable on real hardware. The commit reverts to
the previous behaviour, to load the GRUB2 modules after boot later one by
one in the ISO format case.
Fixes#4647
This commit fixes two issues with the timeout lib and the base-hw src recipe:
* Add source files of timeout lib to recipe content.
The files weren't copied to the depot until now. However, the archive
nonetheless built successfully because of the second issue that is described
below.
* Get rid of the usage of the BASE_DIR variable in the timeout lib.
The BASE_DIR variable always resolves to the repos/base directory even when
building in a depot. That said, the use of BASE_DIR in make-files that are
not part of the build system itself must be avoided. Instead, REP_DIR,
REP_INC_DIR, and $(call select_from_repositories, ...) should be used.
Ref #4209
When creating an Irq connection to a component (not core), e.g. a pin
driver, we typically need a to provide a session label in order to apply
a session policy and to distinguish multiple sessions from the same
component.
genodelabs/genode#4606
The new 'Dictionary' provides an easy way to access objects using
strings as key. The 'String' received the 'operator >' to simplify the
organization of strings in an AVL tree.
The patch removes the former definition of the 'operator >' from the
platform driver because it would be ambigious now.
Fixes#4610
The `with_sub_node` method is renamed to `with_optional_sub_node` to
better reflect that the non-existence of a sub node with the desired type is
ignored.
At the same time, the new `with_sub_node` now takes a second functor that is
called when no sub node of the desired type exists.
genodelabs/genode#4600
The ld.lib.so stub library generated by base/lib/mk/ld.mk has no
purpose at runtime. On the contrary, it must not be integrated into the
boot image because its name collides with the kernel-specific dynamic
linker.
The build system automatically announces the names of shared libraries
as build artifacts. However, in rare cases, it is required to manually
define them. In particular, the 'ld' stub library plays no role at runtime
and should not be integrated into the boot image.
This patch adds a customization hook following the same pattern as used
for target.mk files, namely the BUILD_ARTIFACTS variable. If defined,
its value is taken as the list of boot artifacts generated by the
library-description file.
Issue #4368
This patch adds special handling for lib/<libname> arguments to the
build system, which supersedes the former LIB=<libname> mechanism.
Whereas the old mechanism was limited to a single library, the new
convention allows multiple library arguments, similar to regular
targets. The change brings the two immediate benefits.
First, the streamlining of library and target arguments allows for the
building of libraries via the 'build' command of the run tool.
Second, it alleviates the need for pseudo target.mk files for building
shared libraries that have no direct dependencies, in particular VFS
plugins.
Since this change eases the explicit creation of shared libraries
from run scripts, we may reconsider the automatic implicit building
of shared libraries driven by targets. E.g., while developing a Qt
application, a run script could import the Qt libraries from the
depot and combine those with the developed (fresh built) target without
triggering the build of the Qt libraries in the build directory.
When issueing 'make' without arguments, all targets are built. This
patch applies this behavior to libraries as well, thereby removing the
need for the base/src/lib/target.mk pseudo target as used by the CI
tools to build all libraries.
Note that target.mk files located under src/lib/ are no longer
reachable. Therefore, all run scripts that used to trigger the
build of a shared library via a pseudo target must be adapted.
E.g., 'build lib/vfs/tap' must be replaced by 'build lib/vfs_tap'.
With this patch, the LIB=<libname> option is no longer supported.
Fixes#4599
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
The link dissolve timeout is updated for every packet, which leads to
trigger_once() RPCs that only marginally change the scheduled timeout but
significantly slow down the packet throughput.
genodelabs/genode#4555
acpica and the Intel display driver tries to use the Intel Opregion
simultaneously on Genode, which is not supported nor wanted for IO_MEM region as
which it is handled.
Attempts to remove the access to the region was not successful, since some
SSDT table contains ACPI AML code which is executed regularly and read/write
the Opregion.
The patch adds support to read in a copy of the Intel Opregion done by the
acpi_drv component. The copy was sufficient to make the Intel display driver
working to find and lookup the Intel VBT (video bios table) information to
setup all connectors on a Fujitsu U7411 docking station.
Fixes#4531
Build description files that feature both an actual target and
CUSTOM_TARGET_DEPS happen to re-link the target each time whenever one
of the CUSTOM_TARGET_DEPS is phony, e.g., gems/src/app/menu_view/.
The re-linking of the actual target is of course not desired. By
triggering the creation of CUSTOM_TARGET_DEPS from 'all:' instead of
'$(TARGET)', the specified files do not implicitly become link
dependencies of the target.
Issue #3972
There is a race between the trace subject doing the buffer
initialization and the monitor trying to iterate the buffer entries. If
the monitor tries to iterate entries of an uninitialized buffer, it will
read the very first entry twice. The monitor should therefore only start
iteration when the buffer has been initialised.
genodelabs/genode#4513
After reverting unused ranges during allocator destruction
'_meta_data.free_empty_blocks' may lead to more unused ranges because
meta data blocks maybe freed where the meta data for the blocks is
managed by other meta data blocks. This leads to dangling allocation
warnings which are caused by meta data. Therefore, we call
'_revert_unused_ranges' and 'free_empty_blocks' until no more ranges
can be freed.
issue #4466
Compared to the bytewise memset, a wordwise memset (or even multi-word)
achieves a speedup of ~6.
On Zynq-7000/Cortex-A9:
317 MiB/s -> 2040 MiB/s
On base-linux x86_64:
3580 MiB/s -> 23700 MiB/s
genodelabs/genode#4456
Preloading a few cache lines ahead brings a significant speedup in
memcpy throughput. Note, the particular (optimal) value was empirically
determined on a Cortex-A9 (Zynq-7000) SoC @ 666Mhz. It is best combined
with L2 prefetching enabled (including double linefills and prefetch
offset 7). Yet, even without L2 prefetching this seems to be the sweet
spot.
genodelabs/genode#4456
The implementation is not in use any more. Furthermore, on typical ARM
cores such as the Cortex-A9, the cached read appears to be the
bottleneck rather than instruction density. On a Zynq-7000 SoC, the vfp
implementation performed significantly worse than the standard load/store
multiple implementation with preloading.
genodelabs/genode#4456
This patch makes the trace-subject state as reflected to the trace
monitor more accurate.
Until now, a subject could be in UNTRACED or TRACED state. In reality,
however, there exists an intermediate state after the trace monitor
called 'trace' for the subject but before the subject locally activated
the tracing (done when passing a trace point). This intermediate state
was reflected as UNTRACED. Consequently, threads that never pass a trace
point (e.g., just waiting for I/O) would remain to appear as UNTRACED
even after enabling its tracing by the trace monitor. This is confusing.
This patch replaces the former UNTRACED and TRACED states by three
distinct states:
UNATTACHED prior any call of 'trace'
ATTACHED after a trace monitor called 'trace'
but before the tracing is active
TRACE tracing is active
Fixes#4447
The new macros GENODE_TRACE_TSC and GENODE_TRACE_TSC_NAMED complement
the existing GENODE_LOG_TSC and GENODE_LOG_TSC_NAMED macros to simplify
TSC measurements at a low overhead of the trace mechanism.
Split the trace buffer into two partitions in order to prevent overwriting
of entries when the consumer is too slow. See file comment in buffer.h.
genodelabs/genode#4434
This commit simplifies the current implementation by overloading the
length field with a padding indicator in addition to the zero-length
head entry. This simplifies the iteration semantics as it eliminates
the need for determining whether a zero-length entries is the actual
head of the buffer or a padding at the buffer end.
genodelabs/genode#4434
When committing a new entry, the buffer wrapped if the last entry fit
perfectly into the buffer. Otherwise, the length field of the next entry
was set to 0 to mark the new head. Yet, if there was still some padding but not
enough to hold the length field of another entry, we ended up with a
headless buffer.
genodelabs/genode#4430
Since the head of the buffer is marked by a zero-length entry, we must
only write the length field if a new head was set. Otherwise, the
consumer might already read the new entry and not find the new head as a stop
condition.
genodelabs/genode#4430
* Switch from the legacy usb_host driver to the new PC version
in recipes and automated tests
* Update documentation snippets
* Remove outdated, unused usb_rndis run-script
Fixgenodelabs/genode#4416
XML allows attribute values like <node attr="\"/>. The XML parser
wrongly reflects this case as 'Invalid_syntax'. This behavior stems from
the implicit use of the 'end_of_quote' function, which considers the
sequence of '\"' as a quoted '"' rather than the end of a quoted string.
The patch solves this problem by making the 'end_of_quote' part of
the tokenizer's scanner policy.
The patch removes the 'end_of_quote' function from 'util/string.h'
because it is not universal, and to avoid the ambiguity with
'SCANNER_POLICY::end_of_quote'.
Fixes#4431
When a PD owns the right to ask for a RAM dataspace's `dma_addr` it is
concurrently constrained to use allocations of a specific physical RAM area.
This commit further limits this area by removing RAM page frame zero.
Otherwise the return value of `dma_addr` for such a dataspace would be
erroneously interpreted as a fault, because zero is currently the error
return value of `dma_addr`.
Fixgenodelabs/genode#4428
This patch cuts the superfluous dependency of abi.so files from the
library dependencies of the corresponding lib.so file. ABIs depend
only on symbol files.
Prior this patch, the second step of the following sequence would
wrongly re-build the abi.so file.
arm_v6$ make init
arm_v6$ make init KERNEL=hw
As the KERNEL argument does not affect the ABI, the abi.so should
better not be created twice.
Issue #4408
Genode linker does not support .gnu.hash tables so they will never be
used. Tell the linker not to bother producing them. This should reduce
the size of Genode ELF files a tiny bit without loosing anything
important in the process.
Fixes#4423
This does not affect default Genode builds as far as I can tell. There
is always at least one global static CTOR which seems to be coming from
one of the GCC runtime libs bundled in the toolchain. The problem became
visible for me only after I've replated GCC runtime with LLVM based
one. In such setup I often see binaries that do not have any static ctors.
Such binaries end up crashing Genode ld.lib.so.
Make sure the code does handle empty constructors array.
Fixes#4422
The official way to obtain DMA addresses for RAM dataspaces is
the RPC function 'Pd_session::dma_addr' now. User-level device drivers
should not call this function directly but use the 'Platform_session'
interface of the platform driver instead.
Fixes#2243
To make room for the re-newed usb_host_drv basing on Linux 5.14 and
the re-newed lx_kit/lx_emul we have to move the depot recipe and
consistently name the old drivers with a legacy_ prefix.
Ref genodelabs/genode#4416
This patch removes the implicit build of ld-$(KERNEL) by the generic
ld.mk file because the kernel-specific dynamic linker is unreachable
when building a regular binary archive.
Issue #4320
When 'KERNEL' is specified, let the generic (pseudo) target of
lib/mk/ld.mk trigger the build of the actual dynamic linker named after
the used kernel. This way, we become able to remove the magic
linker-build step from the boot-image stage of the run tool.
Issue #4320
This patch applies the existing "privatization" of transitive
shared-library dependencies from static lib dependencies to shared lib
dependencies. It thereby improves the consistency of binaries created in
a regular build directory with binaries created in depot archives.
Issue #4408
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
* renamed rpi pic to Bcm2835_pic
* renamed rpi3 pic to Bcm2837_pic
* added bcm2837 control for setting prescaler value (to fix timer_accuracy)
* changed handling of all interrupts for rpi3 by cascading to bcm2835 pic
* rpi3 irq controller base address made consistent with rpi
* added usb controller memory region for pic on rpi3 (for SOF interrupts)
Ref #3415
When used by the 'Allocator_avl' the slab allocator's backing store is
dynamically disabled and re-enabled while adding/freeing ranges.
However, during those operations, slab entries can be freed. This,
in turn, can result in the release of a slab block (when the freed slab
entry happens to be the last entry of the block). In this corner case,
'Slab::_release_backing_store' operation has no effect because no
backing-store allocator is set. As a result, the block is no longer
referenced but not physically freed.
The patch fixes the problem by skipping '_free_curr_sb' whenever
no backing store is defined. So the completely empty block remains
in the working set.
Thanks to Peter for reporting and fixing this issue!
Fixes#4367
Fix some trivial cases where the signedness of the constant value does
not match the signedness of type the code expects to see. GCC can be
asked to warn about those by passing Wsign-covnersion flag.
Issue #4354
As far as I can tell this is not raised by any released GCC versions.
Clang 13 on the other hand warns about it due to implicit-int-conversion
warning which is automatically enabled together with Wconversion. The
problem is relatively simple, shifting access_t value does not always
produce result which is also of access_t type. For example, if access_t
is uint16_t, shifting it will produce integer result. This can be
observed even with GCC. Building the following C++ example will fail:
#include <type_traits>
#include <stdint.h>
int test() {
uint16_t a = 0xabcd;
static_assert(std::is_same_v<decltype(a<<1), uint16_t>);
return 0;
}
Changing uint16_t in the static_assert to int, will allow the code to
build.
Make such int to access_t implicit conversion explicit to allow the code
to be compiled with both GCC and clang.
Issue #4354
This patch improves the robustness of the CPU-affinity handling.
- The types in base/affinity.h received the accessors
'Location::within(space)' and 'Affinity::valid', which alleviates
the fiddling with coordinates when sanity checking the values,
in init or core.
- The 'Affinity::Location::valid' method got removed because its
meaning was too vague. For sanity checks of affinity configurations,
the new 'within' method is approriate. In cases where only the x,y
values are used for selecting a physical CPU (during thread creation),
the validity check (width*height > 0) was not meaningful anyway.
- The 'Affinity::Location::from_xml' requires a 'Affinity::Space'
as argument because a location always relates to the bounds of
a specific space. This function now implements the selection of
whole rows or columns, which has previously a feature of the
sandbox library only.
- Whenever the sandbox library (init) encounters an invalid affinity
configuration, it prints a warning message as a diagnostic aid.
- A new 'Affinity::unrestricted' function constructs an affinity that
covers the whole affinity space. The named functions clarifies
the meaning over the previous use of the default constructor.
- Core's CPU service denies session requests with an invalid
affinity parameter. Previously, it would fall back to an
unrestricted affinity.
Issue #4300
