Commit Graph

20477 Commits

Author SHA1 Message Date
Daniel Golle
5bd5be03bb uboot-mediatek: support classic uImage.FIT with internal images in imszb
The side-effect and main motivation is to also drop the FIT structure size
limit because with multiple device tree overlays it may easily grow beyond
the previous 4kB limit in the future.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 98e3f82c3f)
2023-07-13 12:05:28 +01:00
Chukun Pan
f7daeec3bd uboot-mediatek: add H3C Magic NX30 Pro support
The OEM uboot limit brush into 3rd-party firmware.
So add a custom uboot build to support openwrt.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 437e79ad6d)
2023-07-13 12:05:28 +01:00
Wenli Looi
23d6474e45 mediatek: add support for Netgear EX6250v2 series
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac
(Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work
currently as there is no driver.

Related: https://github.com/openwrt/openwrt/pull/5084

For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2.

Specifications:
* MT7629, 256 MiB RAM, 16 MiB SPI NOR
* MT7761N (2.4GHz) / MT7762N (5GHz) - no driver
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.
* After installation, perform a factory reset. Wait for the device to
  boot, then hold the reset button for 10 seconds. This is needed
  because sysupgrade in the stock firmware will attempt to preserve its
  configuration using sysupgrade.tgz.
  See https://github.com/openwrt/openwrt/pull/4182

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit 73de41898f)
2023-07-13 12:05:28 +01:00
Nick Hainke
f2a98977c4 wolfssl: update to 5.6.3
Release Notes:
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable

Refresh patch:
- 100-disable-hardening-check.patch

Backport patch:
- 001-fix-detection-of-cut-tool-in-configure.ac.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 0e83b5e6cc)
2023-07-08 15:43:59 +02:00
Zoltan HERPAI
4a79a94e37 mxs: rework image generation
Migrate to "new" image generation method. Device profiles will be generated
based on image/Makefile instead of profiles/ , which will also allow to
automatically build images for all supported devices via buildbot.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2023-07-06 17:04:13 +02:00
Christian Lamparter
894b2086fd ipq-wifi: fix upstream board-2.bin ZTE M289F snafu
The upstream board-2.bin file in the linux-firmware.git
repository for the QCA4019 contains a packed board-2.bin
for this device for both 2.4G and 5G wifis. This isn't
something that the ath10k driver supports.

Until this feature either gets implemented - which is
very unlikely -, or the upstream boardfile is mended
(both, the original submitter and ath10k-firmware
custodian have been notified). OpenWrt will go back
and use its own bespoke boardfile. This unfortunately
means that 2.4G and on some revisions the 5G WiFi is
not available in the initramfs image for this device.

Fixes: #12886
Reported-by: Christian Heuff <christian@heuff.at>
Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 75505c5ec7)
2023-07-04 22:11:08 +02:00
Felix Fietkau
a70d030fb3 mt76: update to the latest version
f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 816933bee6)
2023-07-04 06:22:07 +02:00
Hauke Mehrtens
f9fadb8de2 libnl-tiny: update to latest git HEAD
d433990 Make struct nla_policy and struct nlattr const

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 513bcfdf78)
2023-07-02 15:31:03 +02:00
Mathew McBride
c54ec81c99 linux-firmware: ibt-firmware: install sfi/ddc files for AX210 card
When using an Intel AX210 card, the Bluetooth hci interface failed
to start due to a missing "ibt-0041-0041.sfi" file.

Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0041-0041.sfi (-2)

A device specific configuration file (DDC) is also required:
Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
Bluetooth: hci0: Waiting for firmware download to complete
...
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562

Fixes: #8558
Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit fff6833d4c)
2023-07-02 15:31:03 +02:00
Mikhail Zhilkin
436ef37728 ramips: add support for Sercomm S1500 devices
This commit adds support for following wireless routers:
 - Beeline SmartBox PRO (Serсomm S1500 AWI)
 - WiFire S1500.NBN (Serсomm S1500 BUC)

This commit is based on this PR:
 - Link: https://github.com/openwrt/openwrt/pull/4770
 - Author: Maximilian Weinmann <x1@disroot.org>
The opening of this PR was agreed with author.

My changes:
- Sorting, minor changes and some movings between dts and dtsi
- Move leds to dts when possible
- Recipes for the factory image
- Update of the installation/recovery/return to stock guides
- Add reset GPIO for the pcie1

Common specification
--------------------
SoC:        MediaTek MT7621AT (880 MHz, 2 cores)
Switch:     MediaTek MT7530 (via SoC MT7621AT)
Wireless:   2.4 GHz, MT7602EN, b/g/n, 2x2
Wireless:   5 GHz, MT7612EN, a/n/ac, 2x2
Ethernet:   5 ports - 5×GbE (WAN, LAN1-4)
Mini PCIe:  via J2 on PCB, not soldered on the board
UART:       J4 -> GND[], TX, VCC(3.3V), RX
BootLoader: U-Boot SerComm/Mediatek

Beeline SmartBox PRO specification
----------------------------------
RAM (Nanya NT5CB128M16FP): 256 MiB
NAND-Flash (ESMT F59L2G81A): 256 MiB
USB ports: 2xUSB2.0
LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP)
Power: 12 VDC, 1.5 A
PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0
CSN: SG15********
MAC LAN: 94:4A:0C:**:**:**
Manufacturer's code: 0AWI0500QW1

WiFire S1500.NBN specification
------------------------------
RAM (Nanya NT5CC64M16GP): 128 MiB
NAND-Flash (ESMT F59L1G81MA): 128 MiB
USB ports: 1xUSB2.0
LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (RESET, WPS)
Power: 12 VDC, 1.0 A
PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0
CSN: MH16********
MAC WAN: E0:60:66:**:**:**
Manufacturer's code: 0BUC0500RW1

MAC address table (PRO)
-----------------------
use   address   source
LAN   *:23      factory 0x1000 (label)
WAN   *:24      factory $label +1
2g    *:23      factory $label
5g    *:25      factory $label +2

MAC addresses (NBN)
-------------------
use   address   source
LAN   *:0e      factory 0x1000
WAN   *:0f      LAN +1 (label)
2g    *:0f      LAN +1
5g    *:10      LAN +2

OEM easy installation
---------------------
1. Remove all dots from the factory image filename (except the dot
   before file extension)
2. Upload and update the firmware via the original web interface
3. Two options are possible after the reboot:
   a. OpenWrt - that's OK, the mission accomplished
   b. Stock firmware - install Stock firmware (to switch booflag from
      Sercomm0 to Sercomm1) and then OpenWrt factory image.

Return to Stock
---------------
1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2
   reboot
2. Install stock firmware via the web OEM firmware interface

Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery

Tested-by: Pavel Ivanov <pi635v@gmail.com>
Tested-by: Denis Myshaev <denis.myshaev@gmail.com>
Tested-by: Oleg Galeev <olegingaleev@gmail.com>
Tested-By: Ivan Pavlov <AuthorReflex@gmail.com>
Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit 2d6784a033)
2023-07-02 15:19:34 +02:00
Felix Fietkau
7be76a9735 mt76: fix download hash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit a3e173e00e)
2023-07-02 10:38:50 +02:00
Felix Fietkau
649d9e3590 mt76: update to the latest version
2c9c8ffe9d8c wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
3365c80f4202 wifi: mt76: connac: fix stats->tx_bytes calculation
b69d82130b47 wifi: mt76: connac: do not check WED status for non-mmio devices
1f9cd65b55d7 wifi: mt76: mt7921e: fix probe timeout after reboot
42dace9ce247 wifi: mt76: mt7921: Fix use-after-free in fw features query.
540adbb38205 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support
150e2d0ffc0c wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
5b7519be2bf6 wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE
40f6e433f747 wifi: mt76: mt76x02: remove WEP support
84ea1a24f5b5 mt76: mt7921: don't assume adequate headroom for SDIO headers
5c28e17f8c78 wifi: mt76: mt7996: fix header translation logic
2386cec860fa wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS support
748d4a2bfebd wifi: mt76: mt7615: enable BSS_CHANGED_MU_GROUPS support
458ad0af21be wifi: mt76: enable UNII-4 channel 177 support
7fb046011293 wifi: mt76: mt7915: fix background radar event being blocked
d2a77a9954bb wifi: mt76: mt7915: report tx retries/failed counts for non-WED path
f76b102b09ca wifi: mt76: mt7915: rework tx packets counting when WED is active
5637d9e37d9e wifi: mt76: mt7915: rework tx bytes counting when WED is active
34bdc7fcb4c0 wifi: mt76: report non-binding skb tx rate when WED is active
d71aa7b992a3 wifi: mt76: mt7915: drop return in mt7915_sta_statistics
251c363c3087 wifi: mt76: mt7996: drop return in mt7996_sta_statistics
150bb95cb153 wifi: mt76: mt7921: do not support one stream on secondary antenna only
d480c3281f21 wifi: mt76: mt7921: remove macro duplication in regs.h
18b1027e5b6e wifi: mt76: mt7915: move mib_stats structure in mt76.h
25ec4b91020e wifi: mt76: mt7996: rely on mib_stats shared definition
6541afa88b3b wifi: mt76: mt7921: rely on mib_stats shared definition
eeb60eb9a5a0 wifi: mt76: mt7915: add support for MT7981 [sync with upstream]
d5b7e6a3d735 wifi: mt76: mt7921e: report tx retries/failed counts in tx free event
f0f19cea6646 wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
edd8a830f6e3 wifi: mt76: add tx_nss histogram to ethtool stats
e48235308b3e wifi: mt76: mt7915: accumulate mu-mimo ofdma muru stats
a729242363d9 wifi: mt76: mt7921: fix non-PSC channel scan fail
8d52436ee0cd wifi: mt76: mt7921: Support temp sensor
d152c8688c14 wifi: mt76: mt7915: disable WFDMA Tx/Rx during SER recovery
d07785c344ac wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recovery
2a19784137f9 wifi: mt76: mt7921: make mt7921_mac_sta_poll static
da8e33a15e71 wifi: mt76: mt7915: fix command timeout in AP stop period
cc58d5c4a9c9 mt76: mt7996: rely on mt76_sta_stats in mt76_wcid
98a37c82a373 wifi: mt76: mt7921: get rid of MT7921_RESET_TIMEOUT marco
ece724cf562b wifi: mt76: mt7996: move radio ctrl commands to proper functions
527cbbc5ede7 wifi: mt76: connac: add support for dsp firmware download
44e323340637 wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command
63f0053df07a wifi: mt76: mt7996: enable VHT extended NSS BW feature
e1bb4ef7b2bb wifi: mt76: connac: add support to set ifs time by mcu command
080ca19cc686 wifi: mt76: mt7996: use correct phy for background radar event
2c163f1812a3 wifi: mt76: mt7996: fix WA event ring size
b511a437ace4 wifi: mt76: mt7996: add muru support
ece67c98dc1c wifi: mt76: mt7996: increase tx token size
7c2515d85117 wifi: mt76: mt7921e: fix init command fail with enabled device
30706095c566 wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_dev
b06ed10ee271 wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock
b59bdae339de wifi: mt76: mt7615: rely on shared sta_poll_list and sta_poll_lock
6da2e0e4ef54 wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lock
b19d3ad88e8b wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lock
595b033275a3 wifi: mt76: mt7915: move poll_list in mt76_wcid
16fcad171849 wifi: mt76: mt7603: rely on shared poll_list field
e19f84091d2e wifi: mt76: mt7615: rely on shared poll_list field
b87e4dad1e84 wifi: mt76: mt7996: rely on shared poll_list field
6d7950e258d0 wifi: mt76: mt7921: rely on shared poll_list field
f5c5eece5038 wifi: mt76: move ampdu_state in mt76_wcid
7e44467469fe mt76: connac: move more mt7921/mt7915 mac shared code in connac lib
39a70710ddcd wifi: mt76: move rate info in mt76_vif
0dc4326991df wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h
29cfabbb4b90 wifi: mt76: connac: add connac3 mac library
d60b401867f4 linux-firmware: update firmware for MT7922 WiFi device
9404601a6c97 linux-firmware: update firmware for MT7922 WiFi device
2f851902d6b1 linux-firmware: update firmware for MT7921 WiFi device
f36b921692b9 Revert "wifi: mt76: mt76x02: remove WEP support
c50be0b54cdd wifi: mt76: mt7915: fix capabilities in non-AP mode
d7d7479b00e9 wifi: mt7915: fix beaconing in mesh mode
1377f586c6f5 wifi: mt7915: move capability check to start_ap

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 01885bc6a3)
(cherry picked from commit 86ebaef5d4)
2023-07-01 22:11:58 +02:00
Mikhail Zhilkin
7ff95775a2 mediatek: add support for Mercusys MR90X v1
This commit adds support for Mercusys MR90X(EU) v1 router.

Device specification
--------------------
SoC Type:   MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM:        MediaTek MT7986BLA (512MB)
Flash:      SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
Ethernet:   MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet:   1x2.5Gbe (WAN/LAN 2.5Gbps), 3xGbE (WAN/LAN 1Gbps, LAN1, LAN2)
WLAN 2g:    MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g:    MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs:       1 orange and 1 green status LEDs, 4 green gpio-controlled
            LEDs on ethernet ports
Button:     1 (Reset)
USB ports:  No
Power:      12 VDC, 2 A
Connector:  Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
            slots contain "seconduboot" (also U-Boot 2022.01-rc4)

Serial console (UART)
---------------------
                            V
+-------+-------+-------+-------+
| +3.3V |  GND  |  TX   |  RX   |
+---+---+-------+-------+-------+
    |
    +--- Don't connect

The R3 (TX line) and R6 (RX line) are absent on the PCB. You should
solder them or solder the jumpers.

Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot initramfs-kernel.bin
      bootm
4. Once inside OpenWrt, set / update env variables:
      fw_setenv baudrate 115200
      fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
      fw_setenv fdtcontroladdr 5ffc0e70
      fw_setenv ipaddr 192.168.1.1
      fw_setenv loadaddr 0x46000000
      fw_setenv mtdids "spi-nand0=spi-nand0"
      fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
      fw_setenv netmask 255.255.255.0
      fw_setenv serverip 192.168.1.2
      fw_setenv stderr serial@11002000
      fw_setenv stdin serial@11002000
      fw_setenv stdout serial@11002000
      fw_setenv tp_boot_idx 0
5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image

Installation (without UART)
---------------------------
1.  Login as root via SSH (router IP, port 20001, password - your web
    interface password)
2.  Open for editing /etc/hotplug.d/iface/65-iptv (e.g., using WinSCP and
    SSH settings from the p.1)
3.  Add a newline after "#!/bin/sh":
       telnetd -l /bin/login.sh
4.  Save "65-iptv" file
5.  Toggle "IPTV/VLAN Enable" checkbox in the router web interface and
    save
6.  Make sure that telnetd is running:
       netstat -ltunp | grep 23
7.  Login via telnet to router IP, port 23 (no username and password are
    required)
8  Upload OpenWrt "initramfs-kernel.bin" to the "/tmp" folder of the
    router (e.g., using WinSCP and SSH settings from the p.1)
9.  Stock busybox doesn't contain ubiupdatevol command. Hence, we need to
    download and upload the full version of busybox to the router. For
    example, from here:
    https://github.com/xerta555/Busybox-Binaries/raw/master/busybox-arm64
    Upload busybox-arm64 to the /tmp dir of the router and run:
    in the telnet shell:
       cd /tmp
       chmod a+x busybox-arm64
10. Check "initramfs-kernel.bin" size:
       du -h initramfs-kernel.bin
11. Delete old and create new "kernel" volume with appropriate size
    (greater than "initramfs-kernel.bin" size):
       ubirmvol /dev/ubi0 -N kernel
       ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB
12. Write OpenWrt "initramfs-kernel.bin" to the flash:
       ./busybox-arm64 ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin
13. u-boot-env can be empty so lets create it (or overwrite it if it
    already exists) with the necessary values:
       fw_setenv baudrate 115200
       fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
       fw_setenv fdtcontroladdr 5ffc0e70
       fw_setenv ipaddr 192.168.1.1
       fw_setenv loadaddr 0x46000000
       fw_setenv mtdids "spi-nand0=spi-nand0"
       fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
       fw_setenv netmask 255.255.255.0
       fw_setenv serverip 192.168.1.2
       fw_setenv stderr serial@11002000
       fw_setenv stdin serial@11002000
       fw_setenv stdout serial@11002000
       fw_setenv tp_boot_idx 0
14. Reboot to OpenWrt initramfs:
       reboot
15. Login as root via SSH (IP 192.168.1.1, port 22)
16. Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router
17. Run sysupgrade:
       sysupgrade -n /tmp/sysupgrade.bin

Recovery
--------
1. Press Reset button and power on the router
2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and
   upload the OEM firmware

Recovery (UART)
---------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot initramfs-kernel.bin
      bootm
4. Do what you need (restore partitions from a backup, install OpenWrt
   etc.)

Stock layout
------------
0x000000000000-0x000000200000 : "boot"
0x000000200000-0x000000300000 : "u-boot-env"
0x000000300000-0x000003500000 : "ubi0"
0x000003500000-0x000006700000 : "ubi1"
0x000006700000-0x000006f00000 : "userconfig"
0x000006f00000-0x000007300000 : "tp_data"

ubi0/ubi1 format
----------------
U-Boot at boot checks that all volumes are in place:
+-------------------------------+
| Volume Name: uboot   Vol ID: 0|
| Volume Name: kernel  Vol ID: 1|
| Volume Name: rootfs  Vol ID: 2|
+-------------------------------+

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| label   | 00:eb:xx:xx:xx:be | label     |
| LAN     | 00:eb:xx:xx:xx:be | label     |
| WAN     | 00:eb:xx:xx:xx:bf | label+1   |
| WLAN 2g | 00:eb:xx:xx:xx:be | label     |
| WLAN 5g | 00:eb:xx:xx:xx:bd | label-1   |
+---------+-------------------+-----------+
label MAC address was found in UBI partition "tp_data", file
"default-mac". OEM wireless eeprom is also there (file
"MT7986_EEPROM.bin").

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit e4fe3097ef)
[Fix merging conflict]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2023-07-01 15:16:17 +00:00
Andreas Böhler
023a8853c8 ipq4019: add support for ZTE MF287+ aka DreiNeo
The ZTE MF287+ is a LTE router used (exclusively?) by the network operator
"3". The MF287 (i.e. non-plus aka 3Neo) is also supported (the only
difference is the LTE modem)

Specifications
==============

SoC: IPQ4018
RAM: 256MiB
Flash: 8MiB SPI-NOR + 128MiB SPI-NAND
LAN: 4x GBit LAN
LTE: ZTE Cat12 (MF287+) / ZTE Cat6 (MF287)
WiFi: 802.11a/b/g/n/ac SoC-integrated

MAC addresses
=============

LAN: from config + 2
WiFi 1: from config
WiFi 2: from config + 1

Installation
============

Option 1 - TFTP
---------------

TFTP installation using UART is preferred. Disassemble the device and
connect serial. Put the initramfs image as openwrt.bin to your TFTP server
and configure a static IP of 192.168.1.100. Load the initramfs image by
typing:

  setenv serverip 192.168.1.100
  setenv ipaddr 192.168.1.1
  tftpboot 0x82000000 openwrt.bin
  bootm 0x82000000

From this intiramfs boot you can take a backup of the currently installed
partitions as no vendor firmware is available for download:

  ubiattach -m14
  cat /dev/ubi0_0 > /tmp/ubi0_0
  cat /dev/ubi0_1 > /tmp/ubi0_1

Copy the files /tmp/ubi0_0 and /tmp/ubi0_1 somewhere save.

Once booted, transfer the sysupgrade image and run sysupgrade. You might
have to delete the stock volumes first:

  ubirmvol /dev/ubi0 -N ubi_rootfs
  ubirmvol /dev/ubi0 -N kernel

Option 2 - From stock firmware
------------------------------

The installation from stock requires an exploit first. The exploit consists
of a backup file that forces the firmware to download telnetd via TFTP from
192.168.0.22 and run it. Once exploited, you can connect via telnet and
login as admin:admin.

The exploit will be available at the device wiki page.

Once inside the stock firmware, you can transfer the -factory.bin file to
/tmp by using "scp" from the stock frmware or "tftp".

ZTE has blocked writing to the NAND. Fortunately, it's easy to allow write
access - you need to read from one file in /proc. Once done, you need to
erase the UBI partition and flash OpenWrt. Before performing the operation,
make sure that mtd13 is the partition labelled "rootfs" by calling
"cat /proc/mtd".

Complete commands:

  cd /tmp
  tftp -g -r factory.bin 192.168.0.22
  cat /proc/driver/sensor_id
  flash_erase /dev/mtd13 0 0
  dd if=/tmp/factory.bin of=/dev/mtdblock13 bs=131072

Afterwards, reboot your device and you should have a working OpenWrt
installation.

Restore Stock
=============

Option 1 - via UART
-------------------

Boot an OpenWrt initramfs image via TFTP as for the initial installation.
Transfer the two backed-up files to your box to /tmp.

Then, run the following commands - replace $kernel_length and $rootfs_size
by the size of ubi0_0 and ubi0_1 in bytes.

  ubiattach -m 14
  ubirmvol /dev/ubi0 -N kernel
  ubirmvol /dev/ubi0 -N rootfs
  ubirmvol /dev/ubi0 -N rootfs_data
  ubimkvol /dev/ubi0 -N kernel -s $kernel_length
  ubimkvol /dev/ubi0 -N ubi_rootfs -s $rootfs_size
  ubiupdatevol /dev/ubi0_0 /tmp/ubi0_0
  ubiupdatevol /dev/ubi0_1 /tmp/ubi0_1

Option 2 - from within OpenWrt
------------------------------

This option requires to flash an initramfs version first so that access
to the flash is possible. This can be achieved by sysupgrading to the
recovery.bin version and rebooting. Once rebooted, you are again in a
default OpenWrt installation, but no partition is mounted.

Follow the commands from Option 1 to flash back to stock.

LTE Modem
=========

The LTE modem is similar to other ZTE devices and controls some more LEDs
and battery management.

Configuring the connection using uqmi works properly, the modem
provides three serial ports and a QMI CDC ethernet interface.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
(cherry picked from commit f70ee53b08)
2023-07-01 15:31:56 +02:00
Jianhui Zhao
42c99789ac uboot-envtools: Add u-boot env config for GL-MT3000
This commit add u-boot env config for GL-MT3000, so
that we can use fw_printenv to print u-boot env and
use fw_setenv to set u-boot env in GL-MT3000.

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
(cherry picked from commit 6892603efa)
2023-07-01 11:49:25 +02:00
Hauke Mehrtens
123afce696 OpenWrt v23.05.0-rc2: revert to branch defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-06-28 00:08:33 +02:00
Hauke Mehrtens
55ae516f61 OpenWrt v23.05.0-rc2: adjust config defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-06-28 00:08:24 +02:00
Flole Systems
cd17d8df2a
filogic: add support for Netgear WAX220
Hardware
--------
SOC:   MediaTek MT7986
RAM:   1024MB DDR3
FLASH: 128MB SPI-NAND (Winbond)
WIFI:  Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH:   Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE
UART:  3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)

Installation
------------

1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect the TFTP server to the WAX220. Conect to the serial console,
   interrupt the autoboot process by pressing '0' when prompted.
3. Download & Boot the OpenWrt initramfs image.

   $ setenv ipaddr 192.168.2.1
   $ setenv serverip 192.168.2.2
   $ tftpboot openwrt.bin
   $ bootm

4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>

Signed-off-by: Flole Systems <flole@flole.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit 984786a2f7)
2023-06-26 13:20:39 +02:00
Hauke Mehrtens
106c83a1ea uhttpd: update to latest git HEAD
34a8a74 uhttpd/file: fix string out of buffer range on uh_defer_script

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7a6f6b8126)
2023-06-25 22:50:50 +02:00
Christian Marangi
02a37dee1b
odhcpd: bump to latest git HEAD
5211264 odhcpd: add support for dhcpv6_pd_min_len parameter
c6bff6f router: Add PREF64 (RFC 8781) support

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit acd9981b4e)
2023-06-24 19:09:52 +02:00
Christian Marangi
2cef1c3277
netfilter: fix typo in nf-socket and nf-tproxy kconfig
Fix a typo where the wrong KCONFIG was used and fix selecting the
correct kernel config option to use these packages.

Fixes: 4f443c885d ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 3ebebf08be)
2023-06-23 17:47:17 +02:00
David Bauer
e962f866b2 mac80211: always use mac80211 loss detection
ath10k does not report excessive loss in case of broken block-ack
sessions. The loss is communicated to the host-os, but ath10k does not
trigger a low-ack events by itself.

The mac80211 framework for loss detection however detects this
circumstance well in case of ath10k. So use it regardless of ath10k's
own loss detection mechanism.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit ed816f6ba8)
2023-06-23 00:23:58 +02:00
David Bauer
b6f2c58dd6 ath79: add support for Aruba AP-115
Hardware
========

CPU   Qualcomm Atheros QCA9558
RAM   256MB DDR2
FLASH 2x 16M SPI-NOR (Macronix MX25L12805D)
WIFI  Qualcomm Atheros QCA9558
      Atheros AR9590

Installation
============

1. Attach to the serial console of the AP-105.
   Interrupt autoboot and change the U-Boot env.

   $ setenv rb_openwrt "setenv ipaddr 192.168.1.1;
     setenv serverip 192.168.1.66;
     netget 0x80060000 ap115.bin; go 0x80060000"
   $ setenv fb_openwrt "bank 1;
     cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000"
   $ setenv bootcmd "run fb_openwrt"
   $ saveenv

2. Load the OpenWrt initramfs image on the device using TFTP.
   Place the initramfs image as "ap105.bin" in the TFTP server
   root directory, connect it to the AP and make the server reachable
   at 192.168.1.66/24.

   $ run rb_openwrt

3. Once OpenWrt booted, transfer the sysupgrade image to the device
   using scp and use sysupgrade to install the firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 1b467a902e)
2023-06-23 00:23:48 +02:00
Maximilian Weinmann
8a0746955d ramips: Add support for Beeline SmartBox TURBO+
This adds support for Beeline Smart Box TURBO+ (Serсomm S3 CQR) router.

Device specification
--------------------
SoC Type: MediaTek MT7621AT (880 MHz, 2 cores)
RAM (Nanya NT5CC64M16GP): 128 MiB
Flash (Macronix MX30LF1G18AC): 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615N): a/n/ac, 4x4
Ethernet: 5 ports - 5×GbE (WAN, LAN1-4)
USB ports: 1xUSB3.0
Buttons: 2 button (reset, wps)
LEDs: Red, Green, Blue
Zigbee (EFR32MG1B232GG): 3.0
Stock bootloader: U-Boot 1.1.3
Power: 12 VDC, 1.5 A

Installation (fw 2.0.9)
-----------------------
1.  Login to the web interface under SuperUser (root) credentials.
    Password: SDXXXXXXXXXX, where SDXXXXXXXXXX is serial number of the
    device written on the backplate stick.
2.  Navigate to Setting -> WAN. Add:
       Name - WAN1
       Connection Type - Static
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
    Save -> Apply. Set default: WAN1
3.  Enable SSH and HTTP on WAN. Setting -> Remote control. Add:
       Protocol - SSH
       Port - 22
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
       WAN Interface - WAN1
    Save ->Apply
    Add:
       Protocol - HTTP
       Port - 80
       IP Address - 172.16.0.1
       Netmask - 255.255.255.0
       WAN interface - WAN1
    Save -> Apply
4.  Set up your PC ethernet:
       Connection Type - Static
       IP Address - 172.16.0.2
       Netmask - 255.255.255.0
       Gateway - 172.16.0.1
5.  Connect PC using ethernet cable to the WAN port of the router
6.  Connect to the router using SSH shell under SuperUser account
7.  Make a mtd backup (optional, see related section)
8.  Change bootflag to Sercomm1 and reboot:
        printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
        reboot
9.  Login to the router web interface under admin account
10. Remove dots from the OpenWrt factory image filename
11. Update firmware via web using OpenWrt factory image

Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3

mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
      cd /tmp
      for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
      tftp -l mtd$i -p 172.16.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
      tftp -l mtd.md5 -p 171.16.0.2

Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery

MAC Addresses (fw 2.0.9)
------------------------
+-----+------------+---------+
| use | address    | example |
+-----+------------+---------+
| LAN | label      | *:e8    |
| WAN | label + 1  | *:e9    |
| 2g  | label + 4  | *:ec    |
| 5g  | label + 5  | *:ed    |
+-----+------------+---------+
The label MAC address was found in Factory 0x21000

Factory image format
--------------------
+---+-------------------+-------------+--------------------+
| # | Offset            | Size        | Description        |
+---+-------------------+-------------+--------------------+
| 1 | 0x0               | 0x200       | Tag Header Factory |
| 2 | 0x200             | 0x100       | Tag Header Kernel1 |
| 3 | 0x300             | 0x100       | Tag Header Kernel2 |
| 4 | 0x400             | SIZE_KERNEL | Kernel             |
| 5 | 0x400+SIZE_KERNEL | SIZE_ROOTFS | RootFS(UBI)        |
+---+-------------------+-------------+--------------------+

Co-authored-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
(cherry picked from commit 8fcfb21b16)
2023-06-17 12:59:37 +02:00
Jitao Lu
e9d2ff8045 openssl: passing cflags to configure
openssl sets additional cflags in its configuration script. We need to
make it aware of our custom cflags to avoid adding conflicting cflags.

Fixes: #12866
Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
(cherry picked from commit 51f57e7c2d)
2023-06-17 12:55:29 +02:00
Álvaro Fernández Rojas
25f6252620 base-files: upgrade: nand: add JFFS2 cleanmarkers support
Some Broadcom MIPS devices require JFFS2 cleanmarkers to be present on the
kernel partition or the bootloader will identify the partition as corrupt and
won't boot the kernel.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 434df8df54)
2023-06-15 11:48:45 +02:00
Zoltan HERPAI
a11f2e6044 uboot-sifiveu: add bootloader package for SiFive Ux40 boards
Add new package for building bootloader for the SiFive U-series boards. Supported
boards at this stage are the HiFive Unleashed and HiFive Unmatched.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
(cherry picked from commit 91406797f9)
2023-06-14 09:22:08 +02:00
Zoltan HERPAI
cd650f1e91 openssl: add linux-riscv64 into the targets list
Add "linux-riscv64-openwrt" into openssl configurations to enable building
on riscv64.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
(cherry picked from commit a0840ecd53)
2023-06-14 09:22:08 +02:00
Zoltan HERPAI
08247ffeda opensbi: add package for RISC-V
OpenSBI is a form of a first-stage bootloader, which initializes
certain parts of an SoC and then passes on control to the second
stage bootloader i.e. an u-boot image.

We're introducing the package with release v1.2, which provides
SBI v0.3 and the SBI SRST extensions which helps to gracefully
reboot/shutdown various HiFive-U SoCs.

Tested on SiFive Unleashed and Unmatched boards.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
(cherry picked from commit 944b13b3ee)
2023-06-14 09:22:08 +02:00
Petr Štetiar
848759c236
uboot-armsr: add support for QEMU armv7/armv8
Add new package so we can use self-compiled bootloader during QEMU based
testing and development.

Backported fix[1] is needed for EFI boot from virtio devices.

1. https://patchwork.ozlabs.org/project/uboot/patch/20230424134946.v10.7.Ia5f5e39c882ac22b5f71c4d576941b34e868eeba@changeid/

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b8e3fa2d12)
2023-06-13 14:15:22 +02:00
Mathew McBride
e9ea571657
wolfssl: change armvirt reference to armsr
armvirt target has been renamed to armsr (Arm SystemReady).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit 203deef82c)
2023-06-13 14:14:33 +02:00
Mathew McBride
23a828f230
kernel: netdevices: change armvirt references to armsr
armvirt target has been renamed to armsr (Arm SystemReady)

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit c0bcfde58e)
2023-06-13 14:14:32 +02:00
Mathew McBride
4b48f8a3e7
grub2: change armvirt reference to armsr
The armvirt target has been renamed to armsr (Arm SystemReady),
so the GRUB configuration also needs to change.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit 4ce7d6c888)
2023-06-13 14:14:31 +02:00
Mathew McBride
963ce6990f
kernel: kmod-amazon-ena: move to top level netdevices
The Amazon ENA network devices are also used on the
AWS Arm (Graviton) instance types, so move it from
the x86-only module file to the top level netdevices.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit 3a7c8fd15e)
2023-06-13 14:14:28 +02:00
Luiz Angelo Daros de Luca
4d13a09ba0
kernel: modules: fix mdio-bus-mux description
Simple error during copy/paste

Fixes: 2dbeb60725 ("kernel: add mdio-bus-mux support")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(cherry picked from commit 1e4bc13eaa)
2023-06-13 14:14:23 +02:00
Mathew McBride
f48985861a
grub2: enable EFI for armvirt
This adds a separate package for EFI on Arm SystemReady
compatible machines. 32-bit Arm UEFI is supported as well.

It is very similar to x86-64 EFI setup, without the
need for BIOS backward compatibility and slightly
different default modules.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit 8f29b1573d)
2023-06-13 14:12:26 +02:00
Petr Štetiar
41af35cf6b
ipq807x: add initial support for prpl Foundation Haze board
Haze is prpl Foundation's reference board (WNC LVRP).

Board info:

 - IPQ8072A SoC
 - 2 GiB RAM
 - 4 GiB eMMC
 - 8MiB SPI NOR (MX25U6435F)

 - 3x 1GigE ports (QCA8075)
 - 1x 10GigE port (AQR113C)
 - 1x SFP cage

 - WiFi 6GHz 160MHz (QCN9074)
 - WiFi 5GHz 80+80MHz (QCN5054)
 - WiFi 2.4G (QCN5024)

 - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
 - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x USB 3.0 port
 - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1)
 - Reset and WPS buttons

Flashing instructions:

 1. From U-Boot boot OpenWrt using initramfs image:

    IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm

 2. In OpenWrt running from initramfs execute sysupgrade:

    root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin

Work in progress/known issues:

 * SFP feature not implemented/tested
 * M.2 feature not implemented/tested
 * Bluetooth feature not implemented/tested
 * 6GHz wireless should be working, but not tested
 * MAC address assigments for LAN interfaces

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 2e910039dd)
2023-06-12 22:10:29 +02:00
Petr Štetiar
7e6403a966
ipq-wifi: update to version 2023-06-03
Contains following updates:

 * ipq8074: update RegDB in new submitted BDF
 * Revert "ipq8074: update RegDB in new submitted BDF"
 * qcn9074: update RegDB in new submitted BDF
 * ipq8074: update RegDB in new submitted BDF
 * qca-wireless: ipq40xx: add BDFs for ZTE MF287+
 * Add BDFs for prpl Foundation Haze board

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit c2bb9f055b)
2023-06-12 22:10:28 +02:00
Antti Nykänen
793b9cddd2
ipq-wifi: bump to latest git HEAD
0f73d32 ipq8074: update RegDB in new submitted BDF
a4cd21f ipq8074: add Compex WPQ873 BDF
c888dd0 qca-wireless: ipq40xx: Add BDFs for Eero Cento
6388ba9 ipq8074: update regdb for Netgear SXK80 BDF
77775d2 ipq8074: add Netgear SXK80

Signed-off-by: Antti Nykänen <antti.nykanen@nokia.com>
(cherry picked from commit 86e7614e0d)
2023-06-12 22:10:27 +02:00
Petr Štetiar
03455e79d7
qca-nss-dp: fix oops in nss_dp_probe
Currently kernel crashes when of_phy_connect has issues:

 Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000308
 ...
 pc : phy_attached_print+0x28/0x1b0
 lr : phy_attached_info+0x14/0x20
 ...
 Call trace:
  phy_attached_print+0x28/0x1b0
  phy_attached_info+0x14/0x20
  nss_dp_adjust_link+0x544/0x6c4 [qca_nss_dp]

of_phy_connect returns either pointer or NULL, so can't be checked with
IS_ERR macro.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 38c7cf0e69)
2023-06-12 22:10:18 +02:00
Felix Fietkau
c6531042da
libubox: update to the latest version
b09b316aeaf6 blobmsg: add blobmsg_parse_attr function
eac92a4d5d82 blobmsg: add blobmsg_parse_array_attr
ef5e8e38bd38 usock: fix poll return code check
6fc29d1c4292 jshn.sh: Add pretty-printing to json_dump
5893cf78da40 blobmsg: Don't do at run-time what can be done at compile-time
362951a2d96e uloop: fix uloop_run_timeout
75a3b870cace uloop: add support for integrating with a different event loop

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit b6e0a24c49)
2023-06-12 22:10:18 +02:00
Felix Fietkau
bc6bf2a0d0
unetd: update to the latest version
412d03012f13 network: prevent adding endpoint routes for addresses on the network
faaf9cee6ef4 utils: fix ipv4 checksum issue
0e1c2fad3540 pex-msg: fix memory leak on fread fail in pex_msg_update_request_init
51be0ed659d0 host: fix crash parsing gateway when no endpoint is specified
ca17601dc24e wg-linux: add support for splitting netlink messages for allowed ips
7d3986b7a5a2 wg-linux: increase default messages size

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7b1e898336)
2023-06-12 22:10:17 +02:00
Robert Marko
7baa1573eb
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.

This introduces support for MBSSID and EMA, adds factory test mode and
some new HTT stats.

Tested-by: Francisco G Luna <frangonlun@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit acde5271a6)
2023-06-12 22:10:16 +02:00
Robert Marko
802e99a7fe
mac80211: backport EMA beacon support
Backport EMA beacon support from kernel 6.4.
It is required for MBSSID/EMA suport in ath11k that will follow.

Tested-by: Francisco G Luna <frangonlun@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 84b5735b4c)
2023-06-12 22:10:15 +02:00
Mathew McBride
b1114c1a7a
kernel: add mdio-bus-mux support
The MDIO bus multiplexing framework is used by some drivers
such as dwmac-sun8i.

As this is a per-driver requirement, set it to be hidden in the menu.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit 2dbeb60725)
2023-06-12 22:10:11 +02:00
Christian Marangi
f3ec4a2790
restool: update source.codeaurora.org repository link
source.codeaurora.org project has been shut down and the nxp
repositories has been moved to github. Update the repository
link to the new location.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 0a1ee53235)
2023-06-11 18:57:01 +02:00
Christian Marangi
774ca0c0e9
ls-dpl: update source.codeaurora.org repository link
source.codeaurora.org project has been shut down and the nxp
repositories has been moved to github. Update the repository
link to the new location.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 52fd8d8ba3)
2023-06-11 18:56:52 +02:00
Daniel Golle
5f3c5848e3 uboot-mediatek: adapt BPi-R3 and BPi-R64 to new device tree overlay
Update bootloader environment for BPi-R3 and BPi-R64 to adapt to new
device tree overlay mechanism now that support for multiple device
tree overlays has been added.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit ec50d2d366)
2023-06-09 19:23:03 +01:00
Ivan Pavlov
e1d59497e9 openssl: update to 3.0.9
CVE-2023-2650 fix
Remove upstreamed patches

Major changes between OpenSSL 3.0.8 and OpenSSL 3.0.9 [30 May 2023]
 * Mitigate for very slow OBJ_obj2txt() performance with gigantic OBJECT IDENTIFIER sub-identities. (CVE-2023-2650)
 * Fixed buffer overread in AES-XTS decryption on ARM 64 bit platforms (CVE-2023-1255)
 * Fixed documentation of X509_VERIFY_PARAM_add0_policy() (CVE-2023-0466)
 * Fixed handling of invalid certificate policies in leaf certificates (CVE-2023-0465)
 * Limited the number of nodes created in a policy tree (CVE-2023-0464)

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
(cherry picked from commit 6348850f10)
2023-06-09 13:36:21 +02:00
Hauke Mehrtens
c78ba8a695 valgrind: update to 3.21.0
Release Notes:
https://valgrind.org/docs/manual/dist.news.html

This improves support for the memory allocator used in musl libc 1.2.2
and later which is currently used by OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d85013460d)
2023-06-09 13:25:34 +02:00
Tony Ambardar
436e477430 kselftests-bpf: add kernel BPF tests
Build and package kernel self-tests used for BPF testing, program and JIT
development. This package, together with the existing 'kmod-bpf-test', was
extensively used for past upstream Linux JIT submissions [1].

Currently this includes only 'test_verifier'; building 'test_progs' will
fail due to known endian limitations with bpftool skeletons.

[1]:https://lore.kernel.org/bpf/cover.1633392335.git.Tony.Ambardar@gmail.com

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit 3886ea9b87)
2023-06-09 13:20:44 +02:00
Tony Ambardar
081dfcfb0f base-files: enable BPF JIT kallsyms by default
Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf.

For privileged users, this exports addresses of JIT-compiled programs to
appear in /proc/kallsyms when present, allowing their use for debugging
and in traces.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit b3aaede2a7)
2023-06-09 13:20:05 +02:00
Tianling Shen
3b8564f9aa uboot-rockchip: add Orange Pi R1 Plus LTS support
Add support for the Xunlong Orange Pi R1 Plus LTS.
Manually generated of-platdata files to avoid swig dependency.

Tested-by: Volkan Yetik <no3iverson@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 37fed89166)
2023-06-09 13:15:19 +02:00
Tianling Shen
ecfcc47f0c uboot-rockchip: add Orange Pi R1 Plus support
Add support for the Xunlong Orange Pi R1 Plus.
Manually generated of-platdata files to avoid swig dependency.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 043f8a4f5e)
2023-06-09 13:15:19 +02:00
Tianling Shen
a48d0bdb77 openssl: fix uci config for built-in engines
Built-in engine configs are added in libopenssl-conf/install stage
already, postinst/add_engine_config is just duplicating them, and
due to the lack of `config` header it results a broken uci config:

> uci: Parse error (invalid command) at line 3, byte 0

```
config engine 'devcrypto'
        option enabled '1'
engine 'devcrypto'
        option enabled '1'
        option builtin '1'
```

Add `builtin` option in libopenssl-conf/install stage and remove
duplicate engine configuration in postinst/add_engine_config to
fix this issue.

Fixes: 0b70d55a64 ("openssl: make UCI config aware of built-in engines")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit a0d7193425)
2023-06-08 15:33:14 +02:00
Kevin Darbyshire-Bryant
b99b89da52 netfilter: fix typo in kmod-nft-dup-inet
Fix typo of 'family' in a7e9445975

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 191742eb8d)
2023-06-08 15:33:14 +02:00
Tomasz Maciej Nowak
1e4f9db138 ubnt-ledbar: depend on mediatek and ramips subtargets
It's only used on devices in mt7621 and mt7622 subtargets, so no reason
to compile it for others.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit e81298463e)
2023-06-08 15:33:14 +02:00
Felix Fietkau
bb03069691
netifd: update to the latest version
ec9dba721245 system-linux: fix memory leak in system_bridge_vlan_check

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 20ce21866e)
2023-06-07 09:11:31 +02:00
Hauke Mehrtens
3bdefae5f8
netifd: Fix PKG_MIRROR_HASH
Fix the PKG_MIRROR_HASH value for netifd.

Fixes: d2ecaaca34 ("netifd: update to version 2023-05-31")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 21f713d5ab)
2023-06-07 09:10:51 +02:00
Petr Štetiar
42976b1c97
netifd: update to version 2023-05-31
Contains following changes:

 * bridge: bridge_dump_info: add dumping of bridge attributes
 * bridge: make it more clear why the config was applied
 * cmake: fix build by reordering the cflags definitions
 * treewide: fix multiple compiler warnings

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit d2ecaaca34)
2023-06-07 09:10:17 +02:00
Hauke Mehrtens
5db2d6d009 OpenWrt v23.05.0-rc1: revert to branch defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-06-07 01:06:59 +02:00
Hauke Mehrtens
f29f876bfa OpenWrt v23.05.0-rc1: adjust config defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-06-07 01:06:48 +02:00
Linhui Liu
65b5b72cb7 selinux-policy: update to 1.2.5
30d503a uci jsonfilter: pipe and leak
e13cb64 rpcd leds
144781f jsonfilter, luci, ubus
1210762 rpcd and all agents get fd's leaked
ab9227c rpcd
2f99e0e luci rpcd
b43aaf3 rpcd (enable/disable services) luci peeraddr
f20f03e rpcd
7bc74f6 rpcd reads all subj state and luci-bwc leaks
9634b17 adds inotify perms to anon_inode
3d3c17c adds bare anon_inode (linux 5.15)
7104b20 dnsmasq and luci
0de2c66 luci,rpcd, ucode, wpad
14f5cf9 luci and ucode
e3ce84c rpcd, ucode and cgiio loose ends
96a2401 misc updates
9fe0490 initscript: remove redundant rules
71bd77e allow all init scripts to log to logd
f697331 sandbox: make ttydev handling more robust
a471877 simplify pty tty console access
f738984 sandbox: also remove TIOSCTI from all ttydevs

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
(cherry picked from commit 4c5a9da869)
2023-05-31 23:10:06 +02:00
Tianling Shen
14cbf041ea ca-certificates: Update to version 20230311
Update the ca-certificates and ca-bundle package from version 20211016 to
version 20230311.

Use TAR_OPTIONS instead of hacking Build/Prepare, refresh patches.

Debian change-log entry [1]:
|[...]
|[ Đoàn Trần Công Danh ]
|* ca-certificates: compat with non-GNU mktemp (closes: #1000847)
|
|[ Ilya Lipnitskiy ]
|* certdata2pem.py: use UTC time when checking cert validity
|
|[ Julien Cristau ]
|* Update Mozilla certificate authority bundle to version 2.60
|   The following certificate authorities were added (+):
|   + "Autoridad de Certificacion Firmaprofesional CIF A62634068"
|   + "Certainly Root E1"
|   + "Certainly Root R1"
|   + "D-TRUST BR Root CA 1 2020"
|   + "D-TRUST EV Root CA 1 2020"
|   + "DigiCert TLS ECC P384 Root G5"
|   + "DigiCert TLS RSA4096 Root G5"
|   + "E-Tugra Global Root CA ECC v3"
|   + "E-Tugra Global Root CA RSA v3"
|   + "HARICA TLS ECC Root CA 2021"
|   + "HARICA TLS RSA Root CA 2021"
|   + "HiPKI Root CA - G1"
|   + "ISRG Root X2"
|   + "Security Communication ECC RootCA1"
|   + "Security Communication RootCA3"
|   + "Telia Root CA v2"
|   + "TunTrust Root CA"
|   + "vTrus ECC Root CA"
|   + "vTrus Root CA"
|  The following certificate authorities were removed (-):
|  - "Cybertrust Global Root" (expired)
|  - "EC-ACC"
|  - "GlobalSign Root CA - R2" (expired)
|  - "Hellenic Academic and Research Institutions RootCA 2011"
|  - "Network Solutions Certificate Authority"
|  - "Staat der Nederlanden EV Root CA" (expired)
|* Drop trailing space from debconf template causing misformatting
|  (closes: #980821)
|
|[ Wataru Ashihara ]
|* Make certdata2pem.py compatible with cryptography >= 35 (closes: #1008244)
|[...]

[1]: https://metadata.ftp-master.debian.org/changelogs/main/c/ca-certificates/ca-certificates_20230311_changelog

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 7c83b6ac86)
2023-05-31 23:10:06 +02:00
Petr Štetiar
20295c071a pcre2: fix host compilation of libselinux by enabling PIC
libselinux-3.5 fails to compile in Fedora 38 container due to the
following:

 cc -O2 -I/openwrt/staging_dir/host/include -I/openwrt/staging_dir/hostpkg/include -I/openwrt/staging_dir/target-x86_64_musl/host/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=8 -I/openwrt/staging_dir/hostpkg/include -L/openwrt/staging_dir/host/lib -L/openwrt/staging_dir/hostpkg/lib -L/openwrt/staging_dir/target-x86_64_musl/host/lib -Wl,-rpath=/openwrt/staging_dir/hostpkg/lib -shared -o libselinux.so.1 avc.lo avc_internal.lo avc_sidtab.lo booleans.lo callbacks.lo canonicalize_context.lo checkAccess.lo check_context.lo checkreqprot.lo compute_av.lo compute_create.lo compute_member.lo compute_relabel.lo compute_user.lo context.lo deny_unknown.lo disable.lo enabled.lo fgetfilecon.lo freecon.lo freeconary.lo fsetfilecon.lo get_context_list.lo get_default_type.lo get_initial_context.lo getenforce.lo getfilecon.lo getpeercon.lo init.lo is_customizable_type.lo label.lo label_db.lo label_file.lo label_media.lo label_support.lo label_x.lo lgetfilecon.lo load_policy.lo lsetfilecon.lo mapping.lo matchmediacon.lo matchpathcon.lo policyvers.lo procattr.lo query_user_context.lo regex.lo reject_unknown.lo selinux_check_securetty_context.lo selinux_config.lo selinux_internal.lo selinux_restorecon.lo sestatus.lo setenforce.lo setexecfilecon.lo setfilecon.lo setrans_client.lo seusers.lo sha1.lo stringrep.lo validatetrans.lo -L/openwrt/staging_dir/hostpkg/lib -lpcre2-8 -lfts -ldl -Wl,-soname,libselinux.so.1,--version-script=libselinux.map,-z,defs,-z,relro
 /usr/bin/ld: /openwrt/staging_dir/hostpkg/lib/libpcre2-8.a(pcre2_compile.c.o): relocation R_X86_64_32S against symbol `_pcre2_ucd_stage1_8' can not be used when making a shared object; recompile with -fPIC
 /usr/bin/ld: failed to set dynamic section sizes: bad value

So lets fix it by enabling build of host static library with the
position independent code option enabled.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 12494f5b8a)
2023-05-31 23:10:06 +02:00
Michał Kwiatek
9c45c58c7c netfilter: add kmod-nft-dup-inet
Add kmod-nft-dup-inet package to allow packet duplication in ip/ip6/inet nftables family

Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
(cherry picked from commit a7e9445975)
2023-05-31 23:07:55 +02:00
Pawel Dembicki
6fc6ea4d3a package: layerscape: change loadaddr address
At this moment loadaddr in most layerscape boards are configured to
0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error:

Loading kernel from FIT Image at 81000000 ...

Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-5.15.112
Created: 2023-05-21 17:39:35 UTC
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x810000ec
Data Size: 7513944 Bytes = 7.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x80000000
Entry Point: 0x80000000
Hash algo: crc32
Hash value: 6fd69550
Hash algo: sha1
Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a
Verifying Hash Integrity ... crc32+ sha1+ OK
Loading fdt from FIT Image at 81000000 ...

Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob
Created: 2023-05-21 17:39:35 UTC
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x8172a98c
Data Size: 19794 Bytes = 19.3 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 59792ba3
Hash algo: sha1
Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x8172a98c
Uncompressing Kernel Image
ERROR: new format image overwritten - must RESET the board to recover
resetting ...

This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to
avoid overlapping for bigger images (like initramfs) too.

Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(cherry picked from commit 0822040671)
2023-05-29 14:17:52 +02:00
Chukun Pan
99c94c6696 uboot-mediatek: add Qihoo 360T7 support
The vendor uboot will verify firmware at boot.
So add a custom uboot build for this device.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit c51eb17730)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-29 13:04:14 +01:00
Chukun Pan
f588da89a3 arm-trusted-firmware-mediatek: add build for MT7981 DDR3
Add new build option BOARD_QFN/BOARD_BGA.
This option is only useful for MT7981 device.
MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 602cb4f325)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-29 13:04:14 +01:00
Alexander Couzens
5d0d04e238 mediatek: mt7981: add reserved memory to support pstore
Add reserved memory for pstore/ramoops to device tree used by Linux
as well as U-Boot.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3eb354f999)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-29 13:04:14 +01:00
Tony Ambardar
f54bea12b6 bpftools: update, split off bpftool and libbpf packages
My original bpftools package made "variant" builds of bpftool and libbpf
as a convenience, since both used the same local kernel sources with the
same versioning. This is no longer the case, since the commit below
switched to using an out-of-tree build mirror hosting repos for each.

Replace bpftools with separate bpftool and libbpf packages, each simplified
and correctly versioned. Also fix the broken libbpf ABI introduced in the
same commit. Existing build .config files are not impacted.

Fixes: 00cbf6f6ab ("bpftools: update to standalone bpftools + libbpf, use the latest version")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit afe1bf11f2)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-25 09:33:59 +01:00
Nick Hainke
d4b4926320 busybox: update to 1.36.1
Release Notes:
http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html

Refresh commands, run after busybox is first built once (nothing changed
compared to 1.36.0):

  cd package/utils/busybox/config/
  ../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1
  cd ..
  ./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in

Manual edits needed afterward:

* Config-defaults.in: OpenWrt config symbol IPV6 logic applied to
  BUSYBOX_DEFAULT_FEATURE_IPV6

* Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to
  BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec)

* Config-defaults.in: OpenWrt logic applied to
  BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917)

* Config-defaults.in: correct the default ports that get reset
  BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT    80
  BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT  23

* config/editors/Config.in: Add USE_GLIBC dependency to
  BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090)

* config/shell/Config.in: change at "Options common to all shells" the conditional symbol
  SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH
  (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html
  Apparently our script does not see the hidden option while
  prepending config options with "BUSYBOX_CONFIG_" which leads to a
  missed dependency when the options are later evaluated.)

* Edit a few Config.in files by adding quotes to sourced items in
  config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f)

Tested-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 3b76f6eee4)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:26:32 +01:00
Nick Hainke
ea9a7f1250 libxml2: update to 2.11.4
Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.4

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit c520d682f0)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:26:28 +01:00
Nick Hainke
f1fbf61fcf libcap: update to 2.69
Release Notes:
https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.iuvg7sbjg8pe

Fixes: CVE-2023-2602 CVE-2023-2603
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 78c45c1e59)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:26:24 +01:00
Nick Hainke
60b6220028 lldpd: update to 1.0.17
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.17

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 17fbbafdcb)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:26:19 +01:00
Pietro Ameruoso
22d7148689 mediatek: add support for Zyxel EX5601-T0 router
Zyxel EX5601-T0 specifics
--------------
The operator specific firmware running on the Zyxel branded
EX5601-T0 includes  U-Boot modifications affecting the OpenWrt
installation.

Partition Table
| dev  | size     | erasesize | name          |
| ---- | -------- | --------- | ------------- |
| mtd0 | 20000000 | 00040000  | "spi0.1"      |
| mtd1 | 00100000 | 00040000  | "BL2"         |
| mtd2 | 00080000 | 00040000  | "u-boot-env"  |
| mtd3 | 00200000 | 00040000  | "Factory"     |
| mtd4 | 001c0000 | 00040000  | "FIP"         |
| mtd5 | 00040000 | 00040000  | "zloader"     |
| mtd6 | 04000000 | 00040000  | "ubi"         |
| mtd7 | 04000000 | 00040000  | "ubi2"        |
| mtd8 | 15a80000 | 00040000  | "zyubi"       |

The router boots BL2 which than loads FIP (u-boot).
U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated.
Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked.
Too zloader checks that the firmware contains a particolar file called zyfwinfo.
Additional details regarding Zloader can be found here:
https://hack-gpon.github.io/zyxel/
https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914

Hardware
--------
SOC: MediaTek MT7986a
CPU: 4 core cortex-a53 (2000MHz)
RAM: 1GB DDR4
FLASH: 512MB SPI-NAND (Micron xxx)
WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4
ETH: MediaTek MT7531 Switch + SoC
3 x builtin 1G phy (lan1, lan2, lan3)
1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4)
1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan)
USB: 1 x USB 3.2 Enhanced SuperSpeed port
UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC)
VOIP: 2 FXS ports for analog phones

MAC Address Table
-----------------
eth0/lan    Factory 0x002a
eth1/wan    Factory 0x0024
wifi 2.4Ghz Factory 0x0004
wifi 5Ghz   Factory 0x0004 + 1

Serial console (UART)
---------------------
+-------+-------+-------+-------+-------+
| +3.3V |  RX   |  TX   |  KEY  |  GND  |
+---+---+-------+-------+-------+-------+
    |
    +--- Don't connect

Installation
------------
Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs.
The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities.

1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2):
- Attach a usb-ttl adapter to your computer and boot the router.
- While the router is booting at some point you will read the following: `Please press Enter to activate this console.`
- As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling).
- Most likely the router is still printing the boot log, leave it boot until it stops.
- If everything went ok you should have full root access "root@EX5601-T0:/#".
- Type the following command and press enter: "fw_setenv EngDebugFlag 0x1".
- Reboot the router.
- As soon as you read `Hit any key to stop autoboot:` press Enter.
- If everything went ok you should have the following prompt: "ZHAL>".
- You have successfully unlocked zloader access, this procedure must be done only once.

2. Check the current active partition:
- Boot the router and repeat the steps above to gain root access.
- Type the following command to check the current active image: "cat /proc/cmdline".
- If `rootubi=ubi` it means that the active partition is `mtd6`
- If `rootubi=ubi2` it means that the active partition is `mtd7`
- As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back.
- To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands:
atbt 1  # unlock write
atsw    # swap boot partition
atsr    # reboot the router
- After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2
- If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong.

3. Flashing:
- Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar.
Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes).
I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same:
https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh
- Add the zyfwinfo file into the sysupgrade tar.
- Enter via telnet or ssh into the router with admin credentials
- Enter the following commands to disable the firmware and model checks
"zycli fwidcheck off" and "zycli modelcheck off"
- Open the router web interface and in the update firmware page select the "restore default settings option"
- Select the sysupgrade file and click on upload.
- The router will flash and reboot itself into openwrt from UBI

4. Restoring and going back to Zyxel firmware.
- Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following:
atbt 1  # unlock write
atsw    # swap boot partition
atsr    # reboot the router
- You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt.

Working features
----------------
3 gbit lan ports
Wifi
Zyxel partitioning for coexistance with Zloader and dual boot.
WAN SFP port (only after exporting pins 57 and 10. gpiobase411)
leds
reset button
serial interface
usb port
lan ethernet 2.5 gbit port (autosense)
wan ethernet 2.5 gbit port (autosense)

Not working
----------------
voip (missing drivers or proper zyxel platform software)

Swapping the wan ethernet/sfp xor port
----------------
The way to swap the wan port between sfp and ethernet is the following:
export the pins 57 and 10.
Pin 57 is used to probe if an sfp is present.
If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value).
If pin 57 value is 1 it means that no sfp is inserted into the cage.
In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one.
After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too.
This is totally scriptable of course.

Leds description
------------
All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan).
To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools.
To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools.
Example:
Set lan5 led to fast blink on 2500/1000, slow blink on 10/100:
mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC

Set wan 2.5gbit led to constant on when wan is 2.5gbit:
mdio mdio-bus mmd 6:30 raw 0x0001 0x0080

Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it>
(cherry picked from commit 1c05388ab0)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:26:11 +01:00
Shiji Yang
635d5488c9 ath79: add support for D-Link DIR-859 A3
Specifications:
  SOC:      QCA9563 775 MHz + QCA9880
  Switch:   QCA8337N-AL3C
  RAM:      Winbond W9751G6KB-25 64 MiB
  Flash:    Winbond W25Q128FVSG 16 MiB
  WLAN:     Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3
  LAN:      LAN ports *4
  WAN:      WAN port *1
  Buttons:  reset *1 + wps *1
  LEDs: ethernet *5, power, wlan, wps

MAC Address:
  use      address               source1          source2
  label    40:9b:xx:xx:xx:3c     lan && wlan      u-boot,env@ethaddr
  lan      40:9b:xx:xx:xx:3c     devdata@0x3f     $label
  wan      40:9b:xx:xx:xx:3f     devdata@0x8f     $label + 3
  wlan2g   40:9b:xx:xx:xx:3c     devdata@0x5b     $label
  wlan5g   40:9b:xx:xx:xx:3e     devdata@0x76     $label + 2

Install via Web UI:
  Apply factory image in the stock firmware's Web UI.

Install via Emergency Room Mode:
  DIR-859 A1 will enter recovery mode when the system fails to boot
  or press reset button for about 10 seconds.

  First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1.
  Then we can open http://192.168.0.1 in the web browser to upload
  OpenWrt factory image or stock firmware. Some modern browsers may
  need to turn on compatibility mode.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit 0ffbef9317)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:25:56 +01:00
Shiji Yang
f0b2fdb82e ath79: improve support for D-Link DIR-8x9 A1 series
1. Remove unnecessary new lines in the dts.
2. Remove duplicate included file "gpio.h" in the device dts.
3. Add missing button labels "reset" and "wps".
4. Unify the format of the reg properties.
5. Add u-boot environment support.
6. Reduce spi clock frequency since the max value suggested by the
   chip datasheet is only 25 MHz.
7. Add seama header fixup for DIR-859 A1. Without this header fixup,
   u-boot checksum for kernel will fail after the first boot.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit e5d8739aa8)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:25:52 +01:00
Christian Lamparter
7613efde8e uml: exclude some /arch/x86 optimizations
The x86_64 UML target wants to include SSSE3 optimized
crypto code which lives under /arch/x86/crypto.

However, these are not built and this causes an error.
| ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing.
| make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 959563fb81)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:25:44 +01:00
Rafał Miłecki
6b9f405324 mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()
That was a workaround for OpenWrt generation of config files. This patch
was used to postpone returning from probe function until loading
firmware and calling register_wiphy().

All of that is not needed anymore thanks to the ieee80211 hotplug.d
script introduced in the commit 5f8f8a3661 ("base-files, mac80211,
broadcom-wl: wifi detection and configuration"). That takes care of
generating /etc/config/wireless entries even if wireless device appears
late in the booting process.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bd26266314)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-24 19:25:26 +01:00
Robert Marko
4a6847ce4e
kernel: qca-ssdk: backport support for building as kernel module
Currently, SSDK is rather special in the sense that its not being built as
a proper out of tree module at all but rather like a userspace application
and that involves a lot of make magic which unfortunately broke with make
version 4.4 and newer.

Luckily QCA finally added a way to build SSDK as an out of tree module
and it uses the kernel buildsystem which makes it compile with make 4.4
as well.
So lets backport the support for it and switch to using it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 957f1ee85e)
2023-05-23 23:52:58 +02:00
Christian Marangi
8192380288
OpenWrt v23.05: set branch defaults
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-05-21 15:30:04 +02:00
Christian Lamparter
8182c7edcb firmware: intel-microcode: update to 20230512
Debian changelog:

intel-microcode (3.20230512.1) unstable; urgency=medium

  * New upstream microcode datafile 20230512 (closes: #1036013)
    * Includes fixes or mitigations for an undisclosed security issue
    * New microcodes:
      sig 0x000906a4, pf_mask 0x40, 2022-10-12, rev 0x0004, size 115712
      sig 0x000b06e0, pf_mask 0x01, 2022-12-19, rev 0x0010, size 134144
    * Updated microcodes:
      sig 0x00050653, pf_mask 0x97, 2022-12-21, rev 0x1000171, size 36864
      sig 0x00050654, pf_mask 0xb7, 2022-12-21, rev 0x2006f05, size 44032
      sig 0x00050656, pf_mask 0xbf, 2022-12-21, rev 0x4003501, size 37888
      sig 0x00050657, pf_mask 0xbf, 2022-12-21, rev 0x5003501, size 37888
      sig 0x0005065b, pf_mask 0xbf, 2022-12-21, rev 0x7002601, size 29696
      sig 0x000606a6, pf_mask 0x87, 2022-12-28, rev 0xd000390, size 296960
      sig 0x000706e5, pf_mask 0x80, 2022-12-25, rev 0x00ba, size 113664
      sig 0x000806a1, pf_mask 0x10, 2023-01-13, rev 0x0033, size 34816
      sig 0x000806c1, pf_mask 0x80, 2022-12-28, rev 0x00aa, size 110592
      sig 0x000806c2, pf_mask 0xc2, 2022-12-28, rev 0x002a, size 97280
      sig 0x000806d1, pf_mask 0xc2, 2022-12-28, rev 0x0044, size 102400
      sig 0x000806e9, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472
      sig 0x000806e9, pf_mask 0x10, 2023-01-02, rev 0x00f2, size 105472
      sig 0x000806ea, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472
      sig 0x000806eb, pf_mask 0xd0, 2022-12-26, rev 0x00f2, size 105472
      sig 0x000806ec, pf_mask 0x94, 2022-12-26, rev 0x00f6, size 105472
      sig 0x000806f8, pf_mask 0x87, 2023-03-13, rev 0x2b000461, size 564224
      sig 0x000806f7, pf_mask 0x87, 2023-03-13, rev 0x2b000461
      sig 0x000806f6, pf_mask 0x87, 2023-03-13, rev 0x2b000461
      sig 0x000806f5, pf_mask 0x87, 2023-03-13, rev 0x2b000461
      sig 0x000806f4, pf_mask 0x87, 2023-03-13, rev 0x2b000461
      sig 0x000806f8, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1, size 595968
      sig 0x000806f6, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
      sig 0x000806f5, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
      sig 0x000806f4, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
      sig 0x000906a3, pf_mask 0x80, 2023-02-14, rev 0x042a, size 218112
      sig 0x000906a4, pf_mask 0x80, 2023-02-14, rev 0x042a
      sig 0x000906e9, pf_mask 0x2a, 2022-12-26, rev 0x00f2, size 108544
      sig 0x000906ea, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448
      sig 0x000906eb, pf_mask 0x02, 2022-12-26, rev 0x00f2, size 105472
      sig 0x000906ec, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448
      sig 0x000906ed, pf_mask 0x22, 2023-02-05, rev 0x00f8, size 104448
      sig 0x000a0652, pf_mask 0x20, 2022-12-27, rev 0x00f6, size 96256
      sig 0x000a0653, pf_mask 0x22, 2023-01-01, rev 0x00f6, size 97280
      sig 0x000a0655, pf_mask 0x22, 2022-12-26, rev 0x00f6, size 96256
      sig 0x000a0660, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 97280
      sig 0x000a0661, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 96256
      sig 0x000a0671, pf_mask 0x02, 2022-12-25, rev 0x0058, size 103424
      sig 0x000b0671, pf_mask 0x32, 2023-02-06, rev 0x0113, size 207872
      sig 0x000b06a2, pf_mask 0xc0, 2023-02-22, rev 0x4112, size 212992
      sig 0x000b06a3, pf_mask 0xc0, 2023-02-22, rev 0x4112
  * source: update symlinks to reflect id of the latest release, 20230512

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Tue, 16 May 2023 00:13:02 -0300

intel-microcode (3.20230214.1) unstable; urgency=medium

  * Non-maintainer upload.
  * New upstream microcode datafile 20230214
    - Includes Fixes for: (Closes: #1031334)
       - INTEL-SA-00700: CVE-2022-21216
       - INTEL-SA-00730: CVE-2022-33972
       - INTEL-SA-00738: CVE-2022-33196
       - INTEL-SA-00767: CVE-2022-38090
  * New Microcodes:
    sig 0x000806f4, pf_mask 0x10, 2022-12-19, rev 0x2c000170
    sig 0x000806f4, pf_mask 0x87, 2022-12-27, rev 0x2b000181
    sig 0x000806f5, pf_mask 0x10, 2022-12-19, rev 0x2c000170
    sig 0x000806f5, pf_mask 0x87, 2022-12-27, rev 0x2b000181
    sig 0x000806f6, pf_mask 0x10, 2022-12-19, rev 0x2c000170
    sig 0x000806f6, pf_mask 0x87, 2022-12-27, rev 0x2b000181
    sig 0x000806f7, pf_mask 0x87, 2022-12-27, rev 0x2b000181
    sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170
    sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170, size 600064
    sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181
    sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181, size 561152
    sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e
    sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e, size 212992
    sig 0x000b06a3, pf_mask 0xc0, 2022-12-08, rev 0x410e
  * Updated Microcodes:
    sig 0x00050653, pf_mask 0x97, 2022-08-30, rev 0x1000161, size 36864
    sig 0x00050656, pf_mask 0xbf, 2022-08-26, rev 0x4003303, size 37888
    sig 0x00050657, pf_mask 0xbf, 2022-08-26, rev 0x5003303, size 37888
    sig 0x0005065b, pf_mask 0xbf, 2022-08-26, rev 0x7002503, size 29696
    sig 0x000606a6, pf_mask 0x87, 2022-10-09, rev 0xd000389, size 296960
    sig 0x000606c1, pf_mask 0x10, 2022-09-23, rev 0x1000211, size 289792
    sig 0x000706a1, pf_mask 0x01, 2022-09-16, rev 0x003e, size 75776
    sig 0x000706a8, pf_mask 0x01, 2022-09-20, rev 0x0022, size 76800
    sig 0x000706e5, pf_mask 0x80, 2022-08-31, rev 0x00b8, size 113664
    sig 0x000806a1, pf_mask 0x10, 2022-09-07, rev 0x0032, size 34816
    sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c
    sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c, size 219136
    sig 0x00090675, pf_mask 0x07, 2023-01-04, rev 0x002c
    sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429
    sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429, size 218112
    sig 0x000906a4, pf_mask 0x80, 2023-01-11, rev 0x0429
    sig 0x000906c0, pf_mask 0x01, 2022-09-02, rev 0x24000024, size 20480
    sig 0x000a0671, pf_mask 0x02, 2022-08-31, rev 0x0057, size 103424
    sig 0x000b0671, pf_mask 0x32, 2022-12-19, rev 0x0112, size 207872
    sig 0x000b06f2, pf_mask 0x07, 2023-01-04, rev 0x002c
    sig 0x000b06f5, pf_mask 0x07, 2023-01-04, rev 0x002c

 -- Tobias Frost <tobi@debian.org>  Sun, 12 Mar 2023 18:16:50 +0100

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-21 14:25:52 +02:00
Philip Prindeville
3b2337b467 kernel: disable IGD (video DRM) support
IGD is only useful when accelerating a VM guest that wants to direct
render to memory in the host's framebuffer, but since OpenWrt
typically runs on headless hardware, this serves no purpose.

Also build vfio with VFIO_NOIOMMU undefined (to get all of the code
enabled), but allow it to be enabled via boot-time modparams
settings (or at run-time via sysfs writes to
"/sys/module/vfio/parameters/enable_unsafe_noiommu_mode".

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-05-21 14:25:52 +02:00
Nozomi Miyamori
d728d05c6c dropbear: add ForceCommand uci option
adds ForceCommand option. If the command is specified,
it forces users to execute the command when they log in.

Signed-off-by: Nozomi Miyamori <inspc43313@yahoo.co.jp>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 23:24:50 +02:00
Christian Lamparter
857345496b tfa-layerscape: fix fiptool's build
A missing '\' caused the remaining parameters not to be passed to make.

This fixes the following error:

| gcc -c [...] fiptool.c -o fiptool.o
| In file included from fiptool.h:16,
|                 from fiptool.c:19:
|fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
|   19 | # include <openssl/sha.h>
|      |           ^~~~~~~~~~~~~~~
|compilation terminated.
|make[3]: *** [Makefile:58: fiptool.o] Error 1

as the HOST_CFLAGS are no longer passed.

then, HOST_CFLAGS is specified as a command argument, this
is a specific problem of our built since appending these
needs the override directive.

Fixes: df28bfe03247 ("tfa-layerscape: Change to github and use the latest tag")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 23:20:48 +02:00
Nick Hainke
aa28e91404 nettle: update to 3.9
Changelog:
26cd0222fd/NEWS

Refresh patch:
- 100-portability.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-05-20 21:02:18 +02:00
Wojciech Dubowik
5e91b4507c tfa-layerscape: Change to github and use the latest tag
The default location of tfa-layerscape has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.

v2:
* restored ls1021a-afrdm board
* added platform defines to fiptool so ls-ddr-phy can be built

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Wojciech Dubowik
f6eae517ae ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ppfe-firmware has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.

Tested on:
  * NXP FRWY-LS1012A

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Wojciech Dubowik
6b5496aef1 fman-ucode: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of fman-ucode has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.

Tested on:
  * NXP LS1046A-RDB

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Wojciech Dubowik
69c430aa2c uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of uboot-layerscape has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.

Tested on:
  * NXP FRWY-LS1012A
  * NXP LS1028A-RDB
  * NXP LS1046A-RDB

V2: Remove ls1028ardb specifix fixups not needed with new uboot

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Wojciech Dubowik
2afabe6779 ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ls-rcw has been changed from codeuaurora
to github. The reason is that the old codeaurora source no longer
resolves. Also use the latest tag for Layerscape Linux Development
POC from NXP.

Tested on:
  * NXP FRWY-LS1012A
  * NXP LS1046A-RDB

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE, Mention that previous codeaurora source is
no longer available)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Tiago Gaspar
3f99b2b3f7 kernel: net: add support for kernel tls
Add ktls (Kernel TLS) kmods to enable TLS support
in kernel (allowing TLS offload when the network
card supports it)

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
(added disabled symbols)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:19:14 +02:00
Linhui Liu
c0ef48814e pcre2: switch to Github Releases and bump to 10.42
The mirror at SourceForge is an unofficial mirror and no longer maintained.

ChangeLogs:
https://github.com/PCRE2Project/pcre2/blob/pcre2-10.42/ChangeLog

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
2023-05-20 13:20:53 +08:00
Hauke Mehrtens
3a935f7ea9 util-linux: Use SYS_getrandom in randutils.c
The getrandom syscall is not hanging at bootup any more if there is
not enough entropy. This was fixed upstream in 2018 in commit:
a9cf659e05

This OpenWrt patch is not needed any more.
This reverts commit e64463ebde ("util-linux: avoid using the getrandom syscall")

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-05-19 22:43:45 +02:00
Hauke Mehrtens
2f11a89140 util-linux: Fix taskset conflict with busybox
This fixes the following error:
 * check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset
	But that file is already provided by package  * busybox
 * opkg_install_cmd: Cannot install package taskset.

Fixes: 3c3d797c4d ("busybox: enable taskset by default")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-05-19 22:42:31 +02:00
Nick Hainke
f73d011810 libjson-c: import patch to fix compilation on macos
Fixes errors in the form of:
  /Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
  const char *json_util_get_last_err()
                                    ^
                                     void
  1 error generated.
  ninja: build stopped: subcommand failed.

Reported-by: Paul Spooren <mail@aparcar.org>
Suggested-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-05-19 13:43:18 +02:00
Nick Hainke
f18cb0ba63 f2fs-tools: update to 1.16.0
Remove upstramed patches:
- 100-configure.ac-fix-AC_ARG_WITH.patch
- 101-configure.ac-fix-cross-compilation.patch

Remove deprecated f2fstat tool:
https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=77bf7ed29f1dd1341079913f3b36fc62f812c4f5

Changelog:
06c027a f2fs-tools: upgrade version 1.16.0
542cc57 fsck.f2fs: fix sanity check logic for cp_payload
a7df89e mkfs.f2fs: remove indentation
c82985a fsck.f2fs: don't call report_zone on normal partition
0ac168e f2fs-tools: relax zone size of power of 2
641be32 mkfs.f2fs: trim all the devices except the first one
3835fef f2fs-tools: fix # of total segments
5b08ca9 f2fs_io: support AES_256_HCTR2
ae3301c f2fs_io: Fix out of tree builds
ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount()
77bf7ed f2fs-tools: Remove deprecated f2fstat
fb6575e Remove sg_write_buffer
1bb669e fsck.f2fs: avoid uncessary recalculation
ccd2361 fsck.f2fs: fix potential overflow of copying i_name
cd6b133 fsck.f2fs: add parentheses for SB_MASK
399600a dump.f2fs: remove unavailable option -g
3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly
907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE
9ff70fb f2fs-tools: give less overprovisioning space
844f821 f2fs-tools: set host-aware zoned device similar to host-managed one
88ac76d fsck.f2fs: fix missing to assign c.zoned_model
8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors
2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop
465159f fsck.f2fs: export valid image size
3486b62 mkfs.f2fs: update allocation policy for ro feature
bdd51e5 fsck.f2fs: fix __end_block_addr()
5a5e419 Always use sparse/sparse.h when building for Android
19f77c6 f2fs-tools: fix build error on lz4-1.9.4
986c1f1 Fix format strings in log messages
0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check
9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing
6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE
f09c2b7 f2fs_io: support triggering filesystem GC via ioctl
32e7d27 configure.ac: fix cross compilation
65fe94e configure.ac: fix AC_ARG_WITH
6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block
c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers
5317d18 Improve compile-time type checking for f2fs_report_zone()
92e2e52 Fix f2fs_report_zone()
648a491 Fix the struct f2fs_dentry_block definition
c964547 resize.f2fs: add option to manually specify new overprovision
a741438 fsck.f2fs: drop compression bit if inline_data is set
406b1c9 f2fs-tools: fix cannot get bdev information
9d0cb9e f2fs_io: add dsync option for write
a7b8b46 tools: fix file too large causing overflow
bddca6f dump.f2fs: add -I nid to dump inode by scan full disk
ebc3879 android_config: add time headers
c1144bf Check fallthrough in mount.h for Mac
bcb9929 avoid unnecessary function
7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic.
274abbb Remove unnecessary config.h
8c97ab3 libzone: remove duplicate header
adcec10 Support zoned device if libc exists
efc2bc7 mkfs.f2fs: fix typo
3034a41 mkfs.f2fs: split unused parameter
dd8d8e5 f2fs-tools: do not use SG_IO in Android
4f216e6 f2fs-tools: move android_config before defining them
48c5dbb f2fscrypt: adjust config file first
4b55459 android_config: add missing uuid library

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-05-19 12:07:14 +02:00
Hauke Mehrtens
a665c8e5bd util-linux: Fix build on powerpc and arc
This fixes the build of util-linux on powerpc and arc. Both CPU
architectures were not supported here in addition to the missing MIPS
support.

Fixes: 628a410ed1 ("util-linux: update to 2.39")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-05-19 11:56:45 +02:00
John Audia
b2c0d9d01f kernel: other: adjust paths for new location
This upstream commit[1] moves drivers/bus/mhi/core/ to
drivers/bus/mhi/host/ so we need to correct for that here.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=9fbf10148f31a63b6d8c2b0e56cb97eb173d600b

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-05-18 18:22:26 +02:00