mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
ath79: add support for Aruba AP-115
Hardware
========
CPU Qualcomm Atheros QCA9558
RAM 256MB DDR2
FLASH 2x 16M SPI-NOR (Macronix MX25L12805D)
WIFI Qualcomm Atheros QCA9558
Atheros AR9590
Installation
============
1. Attach to the serial console of the AP-105.
Interrupt autoboot and change the U-Boot env.
$ setenv rb_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66;
netget 0x80060000 ap115.bin; go 0x80060000"
$ setenv fb_openwrt "bank 1;
cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000"
$ setenv bootcmd "run fb_openwrt"
$ saveenv
2. Load the OpenWrt initramfs image on the device using TFTP.
Place the initramfs image as "ap105.bin" in the TFTP server
root directory, connect it to the AP and make the server reachable
at 192.168.1.66/24.
$ run rb_openwrt
3. Once OpenWrt booted, transfer the sysupgrade image to the device
using scp and use sysupgrade to install the firmware.
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
df8e4b6c2e
commit
1b467a902e
@ -93,6 +93,7 @@ zyxel,nbg6616)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
aruba,ap-105|\
|
||||
aruba,ap-115|\
|
||||
aruba,ap-175|\
|
||||
dongwon,dw02-412h-64m|\
|
||||
dongwon,dw02-412h-128m|\
|
||||
|
||||
239
target/linux/ath79/dts/qca9558_aruba_ap-115.dts
Normal file
239
target/linux/ath79/dts/qca9558_aruba_ap-115.dts
Normal file
@ -0,0 +1,239 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca955x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "aruba,ap-115", "qca,qca9558";
|
||||
model = "Aruba AP-115";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,9600n8";
|
||||
};
|
||||
|
||||
/**
|
||||
* Currently unused GPIOs in OpenWrt:
|
||||
*
|
||||
* TPM-CLK: 19
|
||||
* TPM-IO: 20
|
||||
* ETH-PHY-Interrupt: 11
|
||||
* Power-DC: 22
|
||||
* Power-PoE: 23
|
||||
* Power-PoE-8023af: 17
|
||||
*/
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power-green {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power-red {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
radio-24-green {
|
||||
label = "green:radio-24";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
radio-24-amber {
|
||||
label = "amber:radio-24";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
radio-5-green {
|
||||
label = "green:radio-5";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
radio-5-amber {
|
||||
label = "amber:radio-5";
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_usb_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
ath9k: wifi@0,0 {
|
||||
compatible = "pci168c,0033";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
qca,no-eeprom;
|
||||
|
||||
nvmem-cells = <&macaddr_oemdata_1d>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
/**
|
||||
* Ugly hack ahead!
|
||||
*
|
||||
* GPIO05: Bank1-CS / Bank2-CLK
|
||||
* GPIO14: Bank1-CLK / Bank2-CS
|
||||
*
|
||||
* We can not support this with OpenWrt, as this
|
||||
* would require us to influence the pinmux based on the CS.
|
||||
*
|
||||
* We force-select Bank 1. Remember to blame Aruba for that.
|
||||
*/
|
||||
cs0_pin5: spi-cs0-pin5 {
|
||||
pinctrl-single,bits = <0x4 0x900 0xff00>;
|
||||
};
|
||||
|
||||
clk_pin14: spi-cs1-pin14 {
|
||||
pinctrl-single,bits = <0xc 0x0a0000 0xff0000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cs0_pin5 &clk_pin14>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@1 {
|
||||
label = "flash-full";
|
||||
reg = <0x0 0x1000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* Here be dragons */
|
||||
|
||||
partition@100000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x100000 0xe00000>;
|
||||
};
|
||||
|
||||
oemdata: partition@fe0000 {
|
||||
label = "oemdata";
|
||||
reg = <0xfe0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xff0000 0x10000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
qca,no-eeprom;
|
||||
nvmem-cells = <&macaddr_oemdata_1d>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
|
||||
reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <10000>;
|
||||
|
||||
eee-broken-100tx;
|
||||
eee-broken-1000t;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_oemdata_1d>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
pll-data = <0xa6000000 0xa0000101 0xa0001313>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
ge0-sgmii = <0>;
|
||||
txen-delay = <3>;
|
||||
txd-delay = <3>;
|
||||
rxdv-delay = <3>;
|
||||
rxd-delay = <3>;
|
||||
rgmii-enabled = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&oemdata {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_oemdata_1d: macaddr@1d {
|
||||
reg = <0x1d 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
@ -12,6 +12,9 @@ case "$FIRMWARE" in
|
||||
8dev,lima)
|
||||
caldata_extract "art" 0x1000 0x800
|
||||
;;
|
||||
aruba,ap-115)
|
||||
caldata_extract "oemdata" 0x1000 0x440
|
||||
;;
|
||||
asus,pl-ac56|\
|
||||
asus,rp-ac51|\
|
||||
asus,rp-ac66)
|
||||
@ -79,6 +82,9 @@ case "$FIRMWARE" in
|
||||
;;
|
||||
"ath9k-eeprom-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
aruba,ap-115)
|
||||
caldata_extract "oemdata" 0x5000 0x440
|
||||
;;
|
||||
avm,fritz300e)
|
||||
caldata_extract_reverse "urloader" 0x1541 0x440
|
||||
;;
|
||||
|
||||
@ -413,6 +413,21 @@ define Device/aruba_ap-105
|
||||
endef
|
||||
TARGET_DEVICES += aruba_ap-105
|
||||
|
||||
define Device/aruba_ap-115
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := Aruba
|
||||
DEVICE_MODEL := AP-115
|
||||
IMAGE_SIZE := 16000k
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
LOADER_TYPE := bin
|
||||
LOADER_FLASH_OFFS := 0x102000
|
||||
COMPILE := loader-$(1).bin
|
||||
COMPILE/loader-$(1).bin := loader-okli-compile
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
||||
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel
|
||||
endef
|
||||
TARGET_DEVICES += aruba_ap-115
|
||||
|
||||
define Device/aruba_ap-175
|
||||
SOC := ar7161
|
||||
DEVICE_VENDOR := Aruba
|
||||
|
||||
Loading…
Reference in New Issue
Block a user