ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 10:39:04 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ath79: add support for D-Link DIR-859 A3

Browse Source 
Specifications:
  SOC:      QCA9563 775 MHz + QCA9880
  Switch:   QCA8337N-AL3C
  RAM:      Winbond W9751G6KB-25 64 MiB
  Flash:    Winbond W25Q128FVSG 16 MiB
  WLAN:     Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3
  LAN:      LAN ports *4
  WAN:      WAN port *1
  Buttons:  reset *1 + wps *1
  LEDs: ethernet *5, power, wlan, wps

MAC Address:
  use      address               source1          source2
  label    40:9b:xx:xx:xx:3c     lan && wlan      u-boot,env@ethaddr
  lan      40:9b:xx:xx:xx:3c     devdata@0x3f     $label
  wan      40:9b:xx:xx:xx:3f     devdata@0x8f     $label + 3
  wlan2g   40:9b:xx:xx:xx:3c     devdata@0x5b     $label
  wlan5g   40:9b:xx:xx:xx:3e     devdata@0x76     $label + 2

Install via Web UI:
  Apply factory image in the stock firmware's Web UI.

Install via Emergency Room Mode:
  DIR-859 A1 will enter recovery mode when the system fails to boot
  or press reset button for about 10 seconds.

  First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1.
  Then we can open http://192.168.0.1 in the web browser to upload
  OpenWrt factory image or stock firmware. Some modern browsers may
  need to turn on compatibility mode.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit 0ffbef9317)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Shiji Yang 2023-05-05 01:50:36 +00:00 committed by Daniel Golle
parent f0b2fdb82e
commit 635d5488c9
7 changed files with 88 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
package/boot/uboot-envtools/files/ath79
View File

@ -28,6 +28,7 @@ arduino,yun|\
buffalo,bhr-4grv2|\
devolo,magic-2-wifi|\
dlink,dir-859-a1|\
dlink,dir-859-a3|\
dlink,dir-869-a1|\
engenius,eap1200h|\
engenius,eap1750h|\

64
target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts Normal file
View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_dlink_dir-8x9-a1.dtsi"
#include <dt-bindings/leds/common.h>
/ {
compatible = "dlink,dir-859-a3", "qca,qca9563";
model = "D-Link DIR-859 A3";
aliases {
label-mac-device = &wmac;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WPS;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
};
&ath10k {
nvmem-cells = <&calibration_ath10k>, <&macaddr_bdcfg_ethaddr 2>;
nvmem-cell-names = "calibration", "mac-address";
};
&bdcfg {
macaddr_bdcfg_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
&wmac {
nvmem-cells = <&calibration_ath9k>, <&macaddr_bdcfg_ethaddr 0>;
nvmem-cell-names = "calibration", "mac-address";
};

4
target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
View File

@ -28,7 +28,7 @@
&pcie {
status = "okay";
wifi@0,0 {
ath10k: wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
@ -56,7 +56,7 @@
read-only;
};
partition@40000 {
bdcfg: partition@40000 {
compatible = "u-boot,env";
label = "bdcfg";
reg = <0x040000 0x010000>;

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -234,6 +234,9 @@ dlink,dap-1365-a1)
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20"
;;
dlink,dir-859-a3)
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x20"
;;
engenius,ens202ext-v1|\
engenius,enstationac-v1)
ucidef_set_rssimon "wlan0" "200000" "1"

5
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -291,6 +291,7 @@ ath79_setup_interfaces()
dlink,dir-842-c2|\
dlink,dir-842-c3|\
dlink,dir-859-a1|\
dlink,dir-859-a3|\
dlink,dir-869-a1|\
engenius,epg5000|\
engenius,esr1200|\
@ -661,6 +662,10 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "devdata" 0xc9)
wan_mac=$(mtd_get_mac_text "devdata" 0x79)
;;
dlink,dir-859-a3)
lan_mac=$(get_mac_label)
wan_mac=$(macaddr_add "$lan_mac" 3)
;;
qihoo,c301|\
wd,mynet-n600|\
wd,mynet-n750)

1
target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
View File

@ -23,6 +23,7 @@ dlink,dap-3662-a1)
;;
dlink,dir-629-a1|\
dlink,dir-859-a1|\
dlink,dir-859-a3|\
dlink,dir-869-a1|\
qihoo,c301)
fix_seama_header

14
target/linux/ath79/image/generic.mk
View File

@ -1143,18 +1143,28 @@ define Device/dlink_dir-842-c3
endef
TARGET_DEVICES += dlink_dir-842-c3
define Device/dlink_dir-859-a1
define Device/dlink_dir-859-ax
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-859
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
endef
define Device/dlink_dir-859-a1
$(Device/dlink_dir-859-ax)
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-859-a1
define Device/dlink_dir-859-a3
$(Device/dlink_dir-859-ax)
DEVICE_VARIANT := A3
endef
TARGET_DEVICES += dlink_dir-859-a3
define Device/dlink_dir-869-a1
$(Device/seama)
SOC := qca9563