mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
mediatek: add support for Netgear EX6250v2 series
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac
(Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work
currently as there is no driver.
Related: https://github.com/openwrt/openwrt/pull/5084
For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2.
Specifications:
* MT7629, 256 MiB RAM, 16 MiB SPI NOR
* MT7761N (2.4GHz) / MT7762N (5GHz) - no driver
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
* After installation, perform a factory reset. Wait for the device to
boot, then hold the reset button for 10 seconds. This is needed
because sysupgrade in the stock firmware will attempt to preserve its
configuration using sysupgrade.tgz.
See https://github.com/openwrt/openwrt/pull/4182
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit 73de41898f)
This commit is contained in:
Wenli Looi
Daniel Golle
parent
977ee439d7
commit
23d6474e45
@ -12,7 +12,8 @@ touch /etc/config/ubootenv
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
iptime,a6004mx)
|
||||
iptime,a6004mx|\
|
||||
netgear,ex6250-v2)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000"
|
||||
;;
|
||||
esac
|
||||
|
||||
238
target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts
Normal file
238
target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts
Normal file
@ -0,0 +1,238 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7629.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear EX6250 v2";
|
||||
compatible = "netgear,ex6250-v2", "mediatek,mt7629";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-override = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&pio 60 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&pio 58 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
ap_mode {
|
||||
label = "ap_mode";
|
||||
gpios = <&pio 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
};
|
||||
|
||||
extender_mode {
|
||||
label = "extender_mode";
|
||||
gpios = <&pio 53 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&pio 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&pio 61 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_green {
|
||||
label = "green:client";
|
||||
gpios = <&pio 59 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_red {
|
||||
label = "red:client";
|
||||
gpios = <&pio 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_green {
|
||||
label = "green:router";
|
||||
gpios = <&pio 55 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_red {
|
||||
label = "red:router";
|
||||
gpios = <&pio 56 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps_green {
|
||||
label = "green:wps";
|
||||
gpios = <&pio 57 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
eth_green {
|
||||
label = "green:eth";
|
||||
gpios = <&pio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
eth_yellow {
|
||||
label = "yellow:eth";
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_pins>;
|
||||
pinctrl-1 = <&ephy_leds_pins>;
|
||||
status = "okay";
|
||||
|
||||
mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x60000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "Config";
|
||||
reg = <0x60000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
label = "Factory";
|
||||
reg = <0x70000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "firmware";
|
||||
reg = <0x80000 0xcd0000>;
|
||||
compatible = "denx,fit";
|
||||
};
|
||||
|
||||
partition@d50000 {
|
||||
label = "CFG";
|
||||
reg = <0xd50000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@dd0000 {
|
||||
label = "RAE";
|
||||
reg = <0xdd0000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "POT";
|
||||
reg = <0xfd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "LOG";
|
||||
reg = <0xfe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
eth_pins: eth-pins {
|
||||
mux {
|
||||
function = "eth";
|
||||
groups = "mdc_mdio";
|
||||
};
|
||||
};
|
||||
|
||||
ephy_leds_pins: ephy-leds-pins {
|
||||
mux {
|
||||
function = "led";
|
||||
groups = "ephy_leds";
|
||||
};
|
||||
};
|
||||
|
||||
qspi_pins: qspi-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "spi_nor";
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart0_txd_rxd" ;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog_pins: watchdog-pins {
|
||||
mux {
|
||||
function = "watchdog";
|
||||
groups = "watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&watchdog_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -22,3 +22,29 @@ define Device/iptime_a6004mx
|
||||
IMAGE/recovery.bin := append-kernel | pad-to 128k | append-ubi | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += iptime_a6004mx
|
||||
|
||||
define Device/netgear_ex6250-v2
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := EX6250
|
||||
DEVICE_VARIANT := v2
|
||||
DEVICE_ALT0_VENDOR := NETGEAR
|
||||
DEVICE_ALT0_MODEL := EX6400
|
||||
DEVICE_ALT0_VARIANT := v3
|
||||
DEVICE_ALT1_VENDOR := NETGEAR
|
||||
DEVICE_ALT1_MODEL := EX6410
|
||||
DEVICE_ALT1_VARIANT := v2
|
||||
DEVICE_ALT2_VENDOR := NETGEAR
|
||||
DEVICE_ALT2_MODEL := EX6470
|
||||
DEVICE_DTS := mt7629-netgear-ex6250-v2
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
NETGEAR_ENC_MODEL := EX6250v2
|
||||
NETGEAR_ENC_REGION := US
|
||||
NETGEAR_ENC_HW_ID_LIST := 1010000003630000_NETGEAR;1010000003540000_NETGEAR
|
||||
NETGEAR_ENC_MODEL_LIST := EX6250v2;EX6400v3;EX6470;EX6410v2
|
||||
IMAGE_SIZE := 13120k
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-to 128k | append-rootfs | \
|
||||
pad-rootfs | check-size | netgear-encrypted-factory
|
||||
endef
|
||||
TARGET_DEVICES += netgear_ex6250-v2
|
||||
|
||||
@ -9,6 +9,10 @@ case $board in
|
||||
iptime,a6004mx)
|
||||
ucidef_set_led_netdev "wan" "WAN" "orange:wan" "eth1"
|
||||
;;
|
||||
netgear,ex6250-v2)
|
||||
ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "eth0" "tx rx"
|
||||
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "eth0" "link"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
@ -16,6 +16,9 @@ mediatek_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
|
||||
;;
|
||||
netgear,ex6250-v2)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
@ -24,7 +27,15 @@ mediatek_setup_macs()
|
||||
local board="$1"
|
||||
|
||||
case $board in
|
||||
netgear,ex6250-v2)
|
||||
lan_mac=$(mtd_get_mac_ascii Config mac)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
|
||||
Loading…
Reference in New Issue
Block a user