This driver component provides support for using consumer NVMe storage
devices, i.e. it omits name space managment and will always use the
first name space, on Genode. For now it defaults to a reasonable low
configuration:
- 1 I/O queue (completion/submission tuple)
- 128 entries in the I/O queue
- 4096 as the only I/O transaction memory page size
Fixes#2747.
Our static okl4 system-integration configuration specifies a fixed RAM
range from 32 to 800 MiB, which must be satisfied by Qemu or strange
errors happen due to accesses beyond RAM. (Fixes current issues with
nic_router.run.)
Switch port I/O based PCI config space access to memory-mapped IO. The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.
The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.
The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.
Fixes#2547
When a pkg is missing, the user should create <arch>/pkg instead
of only the missing pkg. This way, all depending binaries are created in
one step. Otherwise the missing binaries are detected at the next time
the run script is executed. This patch relieves the user from iterating
manually.
This commit changes the semantic of run_boot_dir to link a core
binary with debug symbols only when the designated library is in place.
Follow-up fix refering to issues #2339 and #2700
The install_pxe_bootloader_to_run_dir procedure is required by the tftp
as well as the ipxe load script. Move it to a separate file which is
include by both.
- Use latest Muen version
- Sync VirtualBox Muen subject state
- Drop unneccessary subject IP patch
- Adapt Muen RUN_OPTs
- Update documentation
Note: the GPL 2017 toolchain is now required and as the debug output
format has changed the mulog-subject.py script must be updated on
autopilot instances.
The timestamp-based rules of make do not work well for the publish tool
because depot archives are often re-created with the same content but a
different modification time, in particular when creating archives via
'FORCE'. This way, those archives are re-published every time, which
becomes a time-consuming operation since all archives must be signed.
This patch filters the targets based on the content that is already
present in the public/ location. All existing archives are skipped.
Apply the approach to join the argument list 'args' to pass a single
list argument to _collect_from_depot. Actually, this story teaches me to
shy away from {*} because of its special semantics, which are
{*} makes each item in a list an individual argument of the current
command (https://wiki.tcl.tk/17158)
This is a direct follow up to "run: let import_from_depot accept list
variables", which broke calling import_from_depot with a number of
individual arguments.
Issue #2619
When doing something like this in a run script ...
lappend arg X
lappend arg Y
lappend arg Z
import_from_depot arg
... the internals of import_from_depot do not treat $arg as list but as one
string and interprets it as malformed depot path. We can handle this by
applying {*} to $arg inside the procedure.
Issue #2619
This patch changes the depot layout such that each archive is
represented as a directory that contains the versions of the archive as
subdirectories.
Issue #2610
The run tool now by default checks configurations with target-specific
XML schemata. Each component may define a config schema file in its
target.mk via the CONFIG_XSD variable. When the run tool has checked an
configuration of an init instance, it additionally goes through the
start nodes of the config. For each start node it checks whether there
is an XSD file that matches. If so, the run tool also checks the config
of the start node (if existant). This is done recursively. I.e., also
the child configs of a sub-init of a sub-init of the top-level init
receive a config check.
Issue #2600
In general, make the message conform to the according message of the
common build system. Adds instruction how to fix the missing/outdated
port.
Fixes#2573
If there is no debug/core-<kernel>.o library available, e.g., when
running a scenario in a fresh build directory where core is provided
via a depot package, the build_core_image step of the run tool was
canceled in the past, when trying to access the non-existing library.
This commit changes the semantic of build_core_image to link a core
binary with debug symbols only when the designated library is in place.
This fixup is related to issue #2339
* introduce new syscall (core-only) to create privileged threads
* take the privilege level of the thread into account
when doing a context switch
* map kernel segment as accessable for privileged code only
Ref #2091
* introduces central memory map for core/kernel
* on 32-bit platforms the kernel/core starts at 0x80000000
* on 64-bit platforms the kernel/core starts at 0xffffffc000000000
* mark kernel/core mappings as global ones (tagged TLB)
* move the exception vector to begin of core's binary,
thereby bootstrap knows from where to map it appropriately
* do not map boot modules into core anymore
* constrain core's virtual heap memory area
* differentiate in between user's and core's main thread's UTCB,
which now resides inside the kernel segment
Ref #2091
In the image.elf file, the very last boot module is followed
by arbitrary other core-local data. Since those boot modules are
exported as page-granular dataspace to the outside of core via core's
ROM service, we need to ensure that the last page is padded with zeros.
When building Genode on a Linux system running in a Xen Dom0, the 'xen'
run target can run a Genode scenario in a Xen DomU.
Usage: in build/x86_*/etc/build.conf, define:
RUN_OPT = --include boot_dir/$(KERNEL) --include image/iso --include power_on/xen --include log/xen --include power_off/xen
The Xen DomU runs in HVM mode and loads Genode from an ISO image. Serial
log output is printed to the console and graphical output is shown in an
SDL window.
The Xen DomU ist managed using the 'xl' command line tool and it is
possible to add configuration options in the 'xen_args' variable in a run
script. Common options are:
- disabling the graphical output:
append xen_args { sdl="0" }
- configuring a network device:
append xen_args { vif=\["model=e1000,mac=02:00:00:00:01:01,bridge=xenbr0"\] }
- configuring USB input devices:
append xen_args { usbdevice=\["mouse","keyboard"\] }
Note: the 'xl' tool requires super-user permissions and interactive
password input can be troublesome in combination with 'expect' and is not
practical for automatic tests. For this reason, the current implementation
assumes that no password input is needed when running 'sudo xl', which can
be achieved by creating a file '/etc/sudoers.d/xl' with the content
'user ALL=(root) NOPASSWD: /usr/sbin/xl'
(where 'user' is the Linux user name).
Fixes#2504
This patch enables one to supply a list of arguments to
'install_config'. The arguments appear concatenated in the resulting
config file. This is useful for embedding dynamically generated content
into an otherwise static configuration. For example, in the following
config, the 'pkg' attribute of the '<query>' config node is defined by
the return value of the 'query_pkg' function:
install_config {
<config>
...
<start name="depot_query">
...
<config>
<query pkg="genodelabs/pkg/} [query_pkg] {"/>
</config>
</start>
</config>}
- Update FatFS port from 0.07e to 0.13
- Multi-device support
- Basic test at run/fatfs
- Adaption of existing components
Note, ffat is now consistently renamed to fatfs.
Ref #2410
relocation is required, to avoid overlapping phdr in the elf binaries, but
sel4 will fail to boot if bender relocates the images at the end of physical
memory. Limit the physical relocation address to a fixed 256M value, so that
sel4 will work.
Issue #2451
The new version of the test exercises the combination of fs_report with
ram_fs and fs_rom as a more flexible alternative to report_rom.
It covers two corner cases that remained unaddressed by fs_rom and
ram_fs so far: First, the late installation of a ROM-update signal
handler at fs_rom right before the content of the file is modified.
Second, the case where the requested file is not present on the file
system at the creation time of the ROM session. Here, the ram_fs missed
to inform listeners for the compound directory about the later created
file.
The former use of 'arm_v7' as architecture was too unspecific. Depot
binary archives for Cortex-A8/A9 platforms should be generated for
the 'arm_v7a' architecture to define the required compile flags
(i.e., -march).
When building with multiple jobs, the 'Makefile' rule may be executed
before any of its sibling rules, which implicitly create the target
directory. In this case, the attempt to create the symlink for
'Makefile' fails and the 'build_bin_archive' aborts. Analogously to the
sibling rules, this fix creates the target directory as a side effect of
the 'Makefile' rule.
This patch makes the build step of the create tool conditional. If
merely creating api, src, pkg, or raw archives, the invocation of the
'build' tool can be skipped. Otherwise, the heap message for the 'build'
tool is displayed (because it is called w/o any arguments), which is
misleading to the user.
The depot tool did not consistently distinct libraries from regular
targets when handling binary archives. The binary archive of a regular
target is located at <user>/<bin>/<arch>/<name> whereas a library is
located at <user>/<bin>/<arch>/<api>/<name>.
Fixes#2438
This patch replaces the toy downloader (that merely copied files
locally, for testing) with the mechanics needed to download files from a
www server.
It also changes the use of GPG to use detached signatures.
Issue #2339
We do not have debug symbols in the bin/ binaries anymore. Thus, use the
debug/ binaries instead. We now have kernel specific binary names for
ld.lib.so and some others. Adapt, to this fact as well. For doing so
without unnecessary output, provide a new parameter "silent" at the
"kernel_specific_binary" procedure.
Ref #2398
Removes the following Fiasco.OC specific features:
* GDB extensions for Fiasco.OC
* i.MX53 support for Fiasco.OC
* Kernel debugger terminal driver
* Obsolete interface Native_pd
* Obsolete function of interface Native_cpu
Previously, the debugging version of the core image
(<build_dir>/var/run/<run_name>.core) was created by the run tool from
the common core object file
(<build_dir>/var/run/<run_name>/core-<kernel>.o). This object file,
however, was already stripped by the build system and thus didn't
contain debug info anymore. The build system also creates an unstripped
version in <build_dir>/debug/core-<kernel>.o, so we now use this one
for <build_dir>/var/run/<run_name>.core.
Ref #2254
This way, files copied from the depot are incorporated in addition to
the files explicitly specified as boot modules.
The patch also adds an automatic check for the validity of the XML
syntax of boot modules ending with '.config'.
Issue #2339
Run scripts can use the new 'import_from_depot' function to incorporate
archive content from the depot into a scenario. The function must be
called after the 'create_boot_directory' function and takes any number
of pkg, src, or raw archives as arguments. An archive is specified as
depot-relative path of the form <user>/<type>/name. Run scripts may
call 'import_from_depot' repeatedly.
An argument can refer to a specific version of an archive or just the
version-less archive name. In the latter case, the current version (as
defined by a corresponding archive recipe in the source tree) is used.
If a 'src' archive is specified, the run tool integrates the content of
the corrsponding binary archive into the scenario. The binary archives
are selected according the spec values as defined for the build directory.
As of now, only x86_32 and x86_64 are supported by the 'depot_spec'
function.
Issue #2339
The <build-dir>/bin/ directory used to contain symbolic links to the
unstripped build results. However, since the upcoming depot tool
extracts the content of binary archives from bin/, the resulting
archives would contain overly large unstripped binaries, which is
undesired. On the other hand, always stripping the build results is not
a good option either because we rely of symbol information during
debugging.
This patch changes the installation of build results such that a new
'debug/' directory is populated besides the existing 'bin/' directory.
The debug directory contains symbolic links to the unstripped build
results whereas the bin directory contains stripped binaries that are
palatable for packaging (depot tool) and for assembling boot images (run
tool).
By installing the core object to bin/, we follow the same convention as
for regular binaries. This, in turn, enables us to ship core in a
regular binary archive. The patch also adjusts the run tool to pick up
the core object from bin/ for the final linking stage.
'unzip' can uncompress and load raw multiboot images and ELF files.
Usage together with the PXE bootloader ease life running the muen hypervisor
together with a Genode/x86_64 VM, where the raw boot image is typically quite
large.
Ref #2358
The information log file contains a list of all log files that are
expected to exist after the autopilot has finished its execution.
By using the '-i' option the default filename of 'autopilot.log'
can be overriden.
Debian has dropped mkisofs long time ago, hence hardcoding it prevents
Genode from being built on Debian easily. This patch makes the tool
configurable (defaulting to mkisofs). Building on Debian can then be
done by something like:
ISOTOOL=genisoimage make run/foobar
Fixes#2234Fixes#2235
An inline attribute mismatch in the gcc-4.9.2 source causes its
compilation to fail on modern gcc versions (verified with gcc 6.3.1,
but probably since gcc 5)
The patch is courtesy of the gcc-patches mailing list:
https://gcc.gnu.org/ml/gcc-patches/2015-08/msg00375.htmlFixes#2341
This enables to use append_if like the append command in the following
situation.
proc optional_binary {} {...}
append_if $optional config {
<start name="} [optional_binary] {">
...
}
We call curl a second time if the first check fails. This gives download
sites time to reconsider their response and helps, for example, to check
the qemu-usb port.
The input_filter is the successor of the input_merger. In addition to
merging input streams, the component applies several forms of input
transformations such as the application of keyboard layouts.
Issue #2264
Put the initialization of the cpu cores, setup of page-tables, enabling of
MMU and caches into a separate component that is only used to bootstrap
the kernel resp. core.
Ref #2092
Instead of implicitly asking for core's link address when linking
core within the run tool, deliver it explicitly to the build_core
routine. Thereby we gain the freedom to use the build_core tool for
different targets like core, and bootstrap.
Ref #2092
This test reproduces an issue of the VFS block file system when the
underlying block device has a coarser granularity than the block
requests issued by the VFS client. I.e., if the underlying block device
has a block size of 4K, writing a sequence of (non-4K-aligned) 512 blocks
that crosss a 4K boundary corrupts the data on the block device.
Issue #2262
Parse ``<env key="..." value=".."/>`` nodes from the config ROM and
populate a list at the 'genode_envp' and 'environ' symbols.
Test script at run/libc_getenv.
Fix#2236
In combination with run/image/uboot, run/boot_dir/foc expected a file link it
created itself to be a directory by trying to create another file link inside
it.
Ref #1987
This commit mostly removes the globally visible NR_OF_CPUS define
from the global makefile specifiers defined in the base-hw repository.
Whereever necessary it adds platform specific makefiles to the base
repository when they were missing.
Ref #2190
This patch make the ABI mechanism available to shared libraries other
than Genode's dynamic linker. It thereby allows us to introduce
intermediate ABIs at the granularity of shared libraries. This is useful
for slow-moving ABIs such as the libc's interface but it will also
become handy for the package management.
To implement the feature, the build system had to be streamlined a bit.
In particular, archive dependencies and shared-lib dependencies are now
handled separately, and the global list of 'SHARED_LIBS' is no more.
Now, the variable with the same name holds the per-target list of shared
libraries used by the target.
This commit adds support for testing multiple kernels within the same
build directory. In addition to the existing -p arguments, the new
version expects one or more -k arguments that denote the kernels to be
used for executing the specified run scripts.
Consequently, the autopilot executes the 3-dimensional matrix of
platforms x kernels x run scripts, e.g.,
autopilot --force -p x86_32 -k nova -k okl4 -k sel4 -k linux -r log
Issue #2190
This patch makes the benefit of the recently introduced unified Genode
ABI available to developers by enabling the use of multiple kernels from
within a single build directory. The create_builddir tool has gained a
new set of kernel-agnostic platform arguments such as x86_32, or panda.
Most build targets within directories are in principle compatible with
all kernels that support the selected hardware platform. To execute a
scenario via the run tool, one has to select the kernel to use by
setting the 'KERNEL' argument in the build configuration
(etc/build.conf). Alternatively, the 'KERNEL' can be specified as
command-line argument of the Genode build system, e.g.:
make run/log KERNEL=nova
This allows us to easily switch from one kernel to another without
rebuilding any Genode component except for the very few kernel-specific
ones.
The new version of the 'create_builddir' tool is still compatible with
the old version. The old kernel-specific build directories can still be
created. However, those variants will eventually be removed.
Note that the commit removes the 'ports-foc' repository from the
generated 'build.conf' files. As this is only meaningful for 'foc',
I did not want to include it in the list of regular repositories (as
visible in a 'x86_32' build directory). Hence, the repository must
now be manually added in order to use L4Linux.
Issue #2190
This patch removes possible ambiguities with respect to the naming of
kernel-dependent binaries and libraries. It also removes the use of
kernel-specific global side effects from the build system. The reach of
kernel-specific peculiarities has thereby become limited to the actual
users of the respective 'syscall-<kernel>' libraries.
Kernel-specific build artifacts are no longer generated at magic places
within the build directory (like okl4's includes, or the L4 build
directories of L4/Fiasco and Fiasco.OC, or the build directories of
various kernels). Instead, such artifacts have been largely moved to the
libcache. E.g., the former '<build-dir>/l4/' build directory for the L4
build system resides at '<build-dir>/var/libcache/syscall-foc/build/'.
This way, the location is unique to the kernel. Note that various tools
are still generated somewhat arbitrarily under '<build-dir>/tool/' as
there is no proper formalism for building host tools yet.
As the result of this work, it has become possible to use a joint Genode
build directory that is usable with all kernels of a given hardware
platform. E.g., on x86_32, one can now seamlessly switch between linux,
nova, sel4, okl4, fiasco, foc, and pistachio without rebuilding any
components except for core, the kernel, the dynamic linker, and the timer
driver. At the current stage, such a build directory must still be
created manually. A change of the 'create_builddir' tool will follow to
make this feature easily available.
This patch also simplifies various 'run/boot_dir' plugins by removing
the option for an externally hosted kernel. This option remained unused
for many years now.
Issue #2190
This patch decouples the kernel-specific implementation of the dynamic
linker from its kernel-agnostic binary interface. The name of the
kernel-specific dynamic linker binary now corresponds to the kernel,
e.g., 'ld-linux.lib.so' or 'ld-nova.lib.so'. Applications are no longer
linked directly against a concrete instance of the dynamic linker but
against a shallow stub called 'ld.lib.so'. This stub contains nothing
but the symbols provided by the dynamic linker. It thereby represents
the Genode ABI.
At system-integration time, the kernel-specific run/boot_dir back ends
integrate the matching the kernel-specific variant of the dynamic linker
as 'ld.lib.so' into the boot image.
The ABI symbol file for the dynamic linker is located at
'base/lib/symbols/ld'. It contains the joint ABI of all supported
architectures. The new utility 'tool/abi_symbols' eases the creation of
such an ABI symbol file for a given shared library. Its result should be
manually inspected and edited as needed.
The patch removes the 'syscall' library from 'base_libs.mk' to avoid
polluting the kernel-agnostic ABI with kernel-specific interfaces.
Issue #2190
Issue #2195
Prepared for internal test machine, which has 8 logical cores.
6 Win7 64bit VMs are started, each having 2 vCPUs, using the same image and
different overlays. Changes to the VM are written to the overlays of ram_fs
and dropped after the test.
lCPU 0 : Genode base system and drivers
lCPU 1-2: VM1 2 vCPUs
lCPU 2-3: VM2 "
lCPU 3-4: VM3 "
lCPU 4-5: VM4 "
lCPU 5-6: VM5 "
lCPU 6-7: VM6 "
Fixes#2143
Instead of solving the problem to deliver ROM modules to core while booting
differently for the several kernels (multi-boot, elfweaver, core re-linking),
this commit unifies the approaches. It always builds core as a library, and
after all binaries are built from a run-script, the run-tool will link an
ELF image out of the core-library and all boot modules. Thereby, core can
access its ROM modules directly.
This approach now works for all kernels except Linux.
With this solution, there is no [build_dir]/bin/core binary available anymore.
For debugging purposes you will find a core binary without boot modules, but
with debug symbols under [run_dir].core.
Fix#2095
base generic code:
* Remove unused verbosity code from mmio framework
* Remove escape sequence end heuristic from LOG
* replace Core_console with Core_log (no format specifiers)
* move test/printf to test/log
* remove `printf()` tests from the log test
* check for exact match of the log test output
base-fiasco:
* remove unused Fiasco::print_l4_threadid function
base-nova:
* remove unused hexdump utility from core
base-hw:
* remove unused Kernel::Thread::_print_* debug utilities
* always print resource summary of core during startup
* remove Kernel::Ipc_node::pd_label (not used anymore)
base*:
* Turn `printf`,`PWRN`, etc. calls into their log equivalents
Ref #1987Fix#2119
* Remove 'test' routine from kernel/core
* Move 'cpu_scheduler' and 'double_list' test to user-land
* Remove 'hw_info' target at all (can be recycled in a topic branch)
When run with the '--autopilot' run option, the 'usb_hid.run' script tests
the input events generated by a 'Pro Micro' microcontroller board. Setup
instructions for the Pro Micro can be found in the run script.
Fixes#2087
A run script to demonstrate the combination of the cpu_sampler, fs_log,
ram_fs and noux components for saving the sampled data in files and
accessing these in a Noux environment. When the script is run by the
autopilot, it will check if one of the generated sample data files
contains the correct instruction pointer. When the script is run
interactively, the generated files can be accessed from a Noux Bash shell.
Fixes#2078
The '--autopilot' option makes it possible for a run script to detect if
it is being executed by the autopilot by
if { [get_cmd_switch --autopilot] } { ... }
In that case, the run script could do an automated test, whereas the
test could be interactive when run without this option.
Fixes#2076
The new parameter specifies the additional timeout duration in seconds
which is incurred by AMT log processing, e.g. time spent waiting for the
system to boot.
Use a seperate handle at each session.
Use SEEK_TAIL to append messages to files.
Increase packet buffer.
Refactor to component framework.
Fixes#1777
Issue #2060
This patch revives our ds_ownership test from 2012, which just revealed
a regression in core where the dataspace-free operation of the RAM
service would unconditionally destroy dataspace objects from foreign
sessions. The patch fixes the bug and adds an updated version of the
test to the autopilot.
Fixes#2065
The main feature for this version upgrade is the use of the instruction
emulator (IEM) to speed up execution and less often the slow recompiler.
issue #2059
- disable iommu
- increase root_cnode further for native boot
- support vesa driver on native hardware
- don't mask edge triggered ioapic irqs
- increase various allocators to get noux_tool_chain_* booting natively
Issue #2044
- adjust syscall bindings to support -fPIC
- read serial i/o ports from BIOS data area
- use autoconf.h provided by sel4
-- to avoid ambiguity between sel4 kernel and user libraries
-- remove manual set defines
- remove debug messages
- increase user virtual area to 3GB
Issue #1720
Issue #2044
When running the same kernel in a VM as on the host system and the
kernel boot message from the VM appears on the log output, the run tool
assumes that the host machine has rebooted unexpectedly. With this
commit, an unexpected reboot is assumed only if the kernel boot message
appears at the beginning of a line. On base-hw, we enforce a line feed
at the beginning of the boot message as the SPIKE emulator log starts
with the first message of the kernel lacking a line feed.
Fixes#2041
This patch equips the build system with the feature of building an
individual library with its dependencies by specifying the library
as 'LIB' argument. E.g., 'make LIB=libc' builds the libc.
This is a generalisation approach of the hw_zynq target. As the boards
typically use UART1 instead of UART0 (used by qemu), we have to
distinguish between those. Moreover, in general hw_zynq does not imply
zynq_qemu anymore, so that the support of particular boards can be
placed in third-party or community repositories (e.g. Genode world).
Fixes#1926
If ports need preparation in order to execute a run script, use the
knowledge about the actual genode directory to suggest a command to the
user that can be directly copied to the command line.
Previously, ports that were needed for a scenario and that were not
prepared or outdated, triggered one assertion each during the second
build stage. The commit slots a mechanism in ahead that gathers all
these ports during the first build stage and reports them in form of a
list before the second build stage is entered. This list can be used
directly as argument for tool/ports/prepare_port to prepare respectively
update the ports. If, however, this mechanism is not available, for
example because a target is build without the first build stage, the old
assertion still prevents the target from running into troubles with a
missing port.
Fixes#1872
To raise readability when preparing multiple ports in parallel we prefix
also the git clone output with the port name dark-yellow-coloured. To
achieve this we sed the git output. In sed \x1b[ resolves to an escape
sequence and \033[, that we use normally, doesn't. The echo command, at
the other hand, resolves both to an escape sequence. Thus we use the
sed-compatible version in general. This commit inhibits the progress
output of git clone as it can't be redirected to sed.
Ref #1872
The tool/prepare_port tool is now able to handle a list of ports that
shall be prepared. Additionally, one may state the number of ports that
shall be prepared in parallel at a max by using the -j parameter. If -j
is not set by the user, the tool acts as with -j1. The previous
implementation of the tool that prepares only a single port was moved to
tool/ports/mk/prepare_single_port.mk and acts as back end to the new
prepare_port tool. The interface of the new prepare_port tool is
backwards compatible. When called for one port only, the behavior is the
same as when calling tool/ports/mk/prepare_single_port.mk directly.
Removes "usage" rule from prepare_single_port.mk. Removes shebang line
from prepare_single_port.mk.
Ref #1872
Enable the ACPI functionality in the platform_drv on hw_x86_64_muen and
provide a simple generated XML report as ROM session in order to make
the PCI configuration space available.
This is a requirement to implement support for MSI on hw_x86_64_muen.
Enable automatic build of Muen system image by adding the image/muen run
script to RUN_OPT. Also specify --image-muen parameters with explanatory
comments.
Note: The ISO image is not built by default anymore.
The script takes the following RUN_OPT parameters:
--image-muen-external-build Muen system is built automatically or externally
--image-muen-system Muen system policy
--image-muen-components Muen system components
--image-muen-hardware Muen hardware platform
--image-muen-gnat-path Path to GNAT toolchain
--image-muen-spark-path Path to SPARK toolchain
This enables installation of the bootloader image without wiping the
partition table which is needed at least for the tz_vmm tutorial with
hw_usb_armory.
Ref #1497
Causes trouble if a gz image is loaded via grub and later used as initrd for a
Linux VM (e.g. with Seoul VMM)
Discovered during Turmvilla scenario #1552 and issue #1733.
To make the creation of a bootstrap medium for most ARM platforms more
comfortable this tool shall bundle all the different U-Boot source
states, patches, and MMC preparation rules that we gathered over the
year for that purpose. As input, the tool merely needs the targeted
platform (analogous to the platform parameter of 'create_builddir'). By
now, 'hw_wand_quad' is the only supported platform. Further platforms
can be added successively. As output, the tool creates a head image file
of small size (8MiB) that can be copied (dd) with offset 0 to the MMC.
Fixes#1730
This makes use of the iPXE sanboot command [1] which downloads and
boots an ISO image directly via HTTP. Therefore, your RUN_OPT needs
both
--include image/iso and
--include load/ipxe
NOTE: The webserver serving the ISO image must support ranged requests,
see [2].
[1] - http://ipxe.org/cmd/sanboot
[2] - http://forum.ipxe.org/showthread.php?tid=7295&pid=10482#pid10482
iPXE is an open source network boot firmware which supports booting from
a web server via HTTP [1].
The following two parameters can be used to specify the iPXE/HTTP setup:
--load-ipxe-base-dir
This parameter specifies the base directory of the HTTP server from
which the target machine downloads the files.
--load-ipxe-boot-dir
The directory relative to iPXE base dir which contains the iPXE
chainload configuration and all necessary files.
The target machine is expected to request the following iPXE
configuration via HTTP:
http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg
This can be achieved by building iPXE with the following embedded
script:
#!ipxe
dhcp
chain http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg
See also [2] for additional information.
[1] - http://ipxe.org/
[2] - http://ipxe.org/howto/chainloading#breaking_the_loop_with_an_embedded_scriptFixes#1708
The commit consumes the argument of a unsupported printf command.
Without the commit - a subsequent command uses the argument of the preceding
command, which may cause memory corruption or page faults for sequences using
string commands, e.g.
Genode::printf("%#x %s\n", 0x20, "Test");
'#' is not supported by Genode::printf. In this scenario a pagefault at
address 0x20 is caused.
Fixes#1701
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:
repos/base/include/spec
repos/base/mk/spec
repos/base/lib/mk/spec
repos/base/src/core/spec
...
Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.
Fix#1673
The plugin works just like the netio plugin and uses the following
parameters
--power-off-energenie-host network address of device
--power-off-energenie-password password for device
--power-off-energenie-port target port of device
The run plugin is not generic and works for NETIO4/NETIO230 powerplugs
only. Further, this opens the path for other vendor-specific powerplug
plugins.
Note, the plugin parameter for the addressed powerplug was renamed to
--power-on-netio-host resp.
--power-off-netio-host
The hw_x86_64_muen platform is a x86/64 base-hw kernel which runs as
isolated subject (guest) on the Muen Separation Kernel (SK) [1].
The platform is implemented as an extension to hw_x86_64 replacing the
PIC and timer drivers with paravirtualized variants. The skeleton
contains a dummy PIC and timer implementation for now.
[1] - http://muen.sk
If a requested report already exists the request is denied with
Invalid_args.
Further, I dusted the report_rom test and added it to the
autopilot list.
If a user has e.g. /tftpboot/x86 as directory and configures
base_dir=/tftboot and offset_dir=/x86, this leads to bad behavior
as the load module creates a symlink
/tftpboot/x86/<builddir> -> <absolut_builddir>
in this case instead of the desired
/tftpboot/x86 -> <absolut_builddir>
Furthermore, the module works on
/tftpboot/x86/config-00-00-00-00-00-00
and
/tftpboot/x86/<builddir>/config-00-00-00-00-00-00
afterwards, which looks bad too. As there is no warning at all, this can
be hard to debug. The commit adds an appropriate check with error message and
exit -1 on an existing directory.
Fixes#1630
If just one multiboot kernel module was loaded after bender, the
relocation was skipped before. This resulted in a corrupt binary image
on ELF loading if the regions of the boot module and the final program
overlap. Now, all modules are copied below 2 GiB (and out of the way)
before ELF loading.
Fixes#1624
Bender upstream issue is TUD-OS/morbo#4
The base-hw kernel on x86_64 currently assumes 254 MiB of RAM. The RAM
region is subtracted from the I/O mem allocator and therefore this range
is not available for device I/O.
If qemu is started with -m 128, the region for (emulated) PCI config
space access lies within this region and I/O mem allocation in the
pci_drv will fail. Giving qemu more RAM moves the PCI config space out
of the 254 MiB region, making the run/libc_ffat scenario with acpi work.
This repository is superseded by the 'dde_bsd' repository. Though
OSSv4 served us well, its future is uncertain and having active
upstream development is preferable. In addition the ported Intel
HD Audio driver did not work on any Thinpad model newer than T60.
Issue #1498.
These audio drivers enable support for Intel HD Audio (Azalia) and
Ensoniq AudioPCI (ES1370) compatible soundcards. They are ported
from OpenBSD 5.7.
Fixes#1498.
Physical CPU quota was previously given to a thread on construction only
by directly specifying a percentage of the quota of the according CPU
session. Now, a new thread is given a weighting that can be any value.
The physical counter-value of such a weighting depends on the weightings
of the other threads at the CPU session. Thus, the physical quota of all
threads of a CPU session must be updated when a weighting is added or
removed. This is each time the session creates or destroys a thread.
This commit also adapts the "cpu_quota" test in base-hw accordingly.
Ref #1464
This patch improves the C++ parser to accommodate the tools for
generating the functional specification from source code:
* Added support for class definitions prefixed with a
namespace as promoted by Genode's coding style.
* Improves robustness of the parsing of function arguments by
considering nameless arguments in function declarations, default
values, varargs.
* Consider const qualfiers in return types.
* Added support for the override, constexpr keywords.
* Parsing of overloaded operators.
* Improved handling of type definitions.
* Added parsing of template arguments.
* Handling of template constructors.
The port uses the Cortex-A9 private timer for the kernel and an EPIT as
user timer. It was successfully tested on the Wandboard Quad and the CuBox-i
with the signal test. It lacks L2-cache and Trustzone support by now.
Thanks to Praveen Srinivas (IIT Madras, India) and Nikolay Golikov (Ksys Labs
LLC, Russia). This work is partially based on their contributions.
Fix#1467
The boot modules assembled by the generated boot_modules.s file is
accessed from core using struct Bm_header. Unfortunately the assembler
.long directive is synonym to .int [1] and thus has the same size as the
C++ int type and *not* long. Use the matching assembly type .quad in
boot_modules.s when generating the file for 64-bit platforms such as
x86_64.
[1] - https://sourceware.org/binutils/docs/as/Long.html
This patch contains the initial code needed to build and bootstrap the
base-hw kernel on x86 64-bit platforms. It gets stuck earlier
because the binary contains 64-bit instructions, but it is started in
32-bit mode. The initial setup of page tables and switch to long mode is
still missing from the crt0 code.
On each execution the output buffer is overriden when run_genode_until
is executed multiple times. Run scripts, that depend on extracting
information after several execution steps, e.g. noux_net_netcat, will
fail to do so. Therefore, we append the newly captured log output to
the old output buffer.
Issue #1327.
The 'check_port_source' checks whether all remote sources defined for a given
port are currently available. It returns zero, when all remote resources are
available.
Fix#1430
The mkfs.ext2 heuristics select the "small" ext2 usage type, which does
not fit well with GiB-sized pen drives. For example, the block size is
just 1024 bytes compared to 4096 for "default". Therefore, we enforce
the default usage type as this fits our use case of dumping the image to
USB sticks better.
The USB Armory is almost the same as the i.MX53-QSB but it uses only
one of the two RAM banks available in i.MX53. Furthermore we use the USB
Armory only with Trustzone enabled.
Ref #1422
* enables world-switch using ARM virtualization extensions
* split TrustZone and virtualization extensions hardly from platforms,
where it is not used
* extend 'Vm_session' interface to enable configuration of guest-physical memory
* introduce VM destruction syscall
* add virtual machine monitor for hw_arndale that emulates a simplified version
of ARM's Versatile Express Cortex A15 board for a Linux guest OS
Fixes#1405
While booting up, some devices send garbage over the serial connection.
This can result in an unexpected EOF event within expect(1). A filter
program may be specified with '--log-serial-filter' to circumvent this
problem. Then, the output of the serial program is piped through
the filter, which may sanitize the character stream.
Fixes#1395.
and move it close to run_genode_until implementation.
Somehow the "match_max -d" gets ignored if it is to far away and some
our run scripts fails because the buffer contains not all information
(seen for affinity.run on a 8 core machine)
This is needed at least by rump_ext2.run as it uses the perf-counter
in the jitterentropy-lib. On other platforms the perf-counter gets enabled
by the kernel by default. However, on HW, we keep the specifier to allow users
to disable it easily (e.g. for security reasons).
Ref #1393
The patch supports both, a download-specific UNZIP_OPT(download) and a
general UNZIP_OPT that can be defined across downloads.
UNZIP_OPT(download) overrides UNZIP_OPT.
Note, the `--strip-components=1` argument is not required for unzip.
Issue #1357
tool/ports/shortcut
create symbolic link from 'contrib/<port-name>-<hash>' to
contrib/<port-name>
tool/ports/current
print current contrib directory of port
Fixes#1345.
When building Genode for VEA9X4 as micro-hypervisor protected by the ARM
TrustZone hardware we ran into limitations regarding our basic daily
testing routines. The most significant is that, when speaking about RAM
partitioning, the only available options are to configure the whole SRAM
to be secure and the whole DDR-RAM to be non-secure or vice versa. The
SRAM however provides only 32 MB which isn't enough for both a
representative non-secure guest OS or a secure Genode that is still
capable of passing our basic tests. This initiated our decision to
remove the VEA9X4 TrustZone-support.
Fixes#1351
Some downloads are available via HTTPS only, but wget < 3.14 does not
support server-name identification, which is used by some sites. So, we
disable certificate checking in wget and check the validity of the
download via SIG or SHA.
Fixes#1334.
Due to commit "run: relax IP power plug recognition + serial EOF",
when piping the serial command through 'tr', some characters might
get buffered, thereby preventing some run scripts to finish correctly.
This commit removes the 'tr' hack. Instead, to circumvent the 'expect'
problem, which kills under special conditions spawned childs used to
obtain serial line content, whenever EOF of the serial command is
recognized during the boot phase, the child process gets re-spawned.
* To communicate with IP power plug devices from Koukaam, to remote
control power supply of test boards, don't parse minor versions, but
support different IP power plugs
* TCL's expect may report an EOF when reading from the spawned serial
terminal, especially when using 'socat' to stream serial over TCP/IP,
although the spawned child is still running and delivering content.
This problem is clearly not dependent on the characters send, but
possibly due to strange pipe signals. When piping the serial output
through 'tr' the problem vanishs.
The older SOAP EOI protocol is not supported with AMT version 9+. By default
the wsman tool will be used if installed.
RUN_OPT examples to enforce amtool or wsman:
--target amt --amt-tool wsman
--target amt --amt-tool amttool
Fixes#1251
Until now, the rumpkernel based tools were installed with all symbols
included. This accounts for about 200MiB used space on 64Bit system.
Stripping the binaries prior to installation brings the space
requirements down to 20MiB.
Fixes#1245.
The clean rule is used to delete already built binaries as well as to
clean-up any left-overs from previous build attempts. If there was
no previous attempt just return true to prevent make from complaining.
Fixes#1245.
This provides bootable disk images for x86 platforms via
! RUN_OPT="--target disk"
The resulting disk image contains one ext2 partition with binaries from
the GRUB2 boot loader and the run scenario. The default disk size fits
all binaries, but is configurable via
! --disk-size <size in MiB>
in RUN_OPT.
The feature depends on an grub2-head.img, which is part of the commit,
but may also be generated by executing tool/create_grub2. The script
generates a disk image prepared for one partition, which contains files
for GRUB2. All image preparation steps that need superuser privileges
are conducted by this script.
The final step of writing the entire image to a disk must be executed
later by
sudo dd if=<image file> of=<device> bs=8M conv=fsync
Fixes#1203.
The build config for core is now provided through libraries to enable
implicit config composition through specifiers and thereby avoid
consideration of inappropriate targets.
fix#1199
Until now, the HW platform support for the TrustZone features of the
i.MX53 boards could only be used, when adding a "trustzone" SPEC variable
manually. This commit adds a create_builddir target for HW i.MX53 with
TrustZone features enabled, fo convenience reasons.
- Log elapsed time per test in summary
- Command-line switch `--time-stamp` prefixes log output lines with
current time stamp (requires ts utility from Debian package _moreutils_)
Fixes#1156.
By adding: "--target jtag \
--jtag-debugger <debugger configuration> \
--jtag-board <board configuration>" to the RUN_OPTs
this commits enables the run-tool to load and execute an ELF image
via JTAG to the target platform.
Fixes#1191
Using 'upvar' instead of 'global' in the 'append_if' and 'lappend_if'
functions makes it possible to use these functions with local variables
of the calling function.
Fixes#1137.
The rumpkernel based tools are intended to be used by executing
'tool/rump'. Since it covers the most common use cases for these
tools, this script is comparatively extensive, hence giving a short
tutorial seems reasonable:
* Format a disk image with Ext2:
To format a disk image with the Ext2 file system, first prepare the
actual image by executing dd:
! dd if=/dev/zero of=/path/to/disk_image bs=1M count=128
Second, use 'tool/rump' to format the disk image:
! rump -f -F ext2fs /path/to/disk_image
Afterwards the just created file system may be populated with the
content of another directory by executing
! rump -F ext2fs -p /path/to/another_dir /path/to/disk_image
The content of the file system image can be listed by executing
! rump -F ext2fs -l /path/to/disk_image
* Create a encrypted disk image:
Creating a cryptographic disk image based on cgd(4) is done by
executing the following command:
! rump -c /path/to/disk_image
This will generate a key that may be used to decrypt the image
later on. Since this command will _only_ generate a key and NOT
initialize the disk image, it is highly advised to prepare the disk
image by using '/dev/urandom' instead of '/dev/zero' (only new blocks
that will be written to the disk image are encrypted). In addition
while generating the key a temporary configuration file will be
created. Although this file has proper permissions, it may leak the
generated key if it is created on persistent storage. To specify a more
secure directory the '-t' option should be used:
! rump -c -t /path/to/secure/directory /path/to/disk_image
Decrypting the disk image requires the key generated in the previous
step:
! rump -c -k <key> /path/to/disk_image
For now this key has to specified as command line argument. This is
an issue if the shell, which is used, is maintaing a history of
executed commands.
For completness sake let us put all examples together by creating a
encrypted Ext2 image that will contain all files of Genode's _demo_
scenario:
! dd if=/dev/urandom of=/tmp/demo.img bs=1M count=16
! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs /tmp/demo.img > \
! /ramfs/key # key is printed out to stdout
! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs -k <key> \
! -p $(BUILD_DIR)/var/run/demo /tmp/demo.img
To check if the image was populated succesfully, execute the
following:
! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs -k <key> -l \
! /tmp/demo.img
The rumpkernel tools are used within the Genode OS Framework tool chain
for preparing and populating disk images as well as creating cgd(4)
based cryptographic disk devices.
Execute 'tool/tool_chain_rump build' to build the tools and afterwards
'tool/tool_chain_rump install' to install the binaries. The default
install location is _/usr/local/genode-rump_.
