This patch simplifies the use of ccache with the build system. Up until
now, each developer had to set up the ccache hooks manually, adjust the
PATH variable, and customize the etc/tools.conf in each build directory.
With the patch, ccache can be enabled by un-commenting a single line in
the etc/build.conf file.
Fixes#4004
The Usb session allows for submitting packets even when the interface
in question is not yet enabled. Enabling an interface will configure
the udev members properly and is normally done implicitly during
processing of an 'ALT_SETTING' packet.
In case the interface was not enabled this leads to a page-fault in
the USB host-controller driver as 'ep' is NULL.
Fixes#3999.
This patch moves the bootstrap-link-address information from the
tool/run/boot_dir/hw file to board-specific property files that can be
accessed by using the board as key. This eliminates the need to
customize boot_dir/hw when hosting board-support in an external
repository.
Fixes#3998
The Vmm::Gic::Gicd_banked::Redistributor is used with Constructible, but
does not have a virtual destructor even though it has virtual methods.
This prompts clang to issue the following warning:
reconstructible.h:122:4: warning: destructor called on non-final
'Vmm::Gic::Gicd_banked::Redistributor' that has virtual functions
but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
Fix this by inheriting Genode::Interface.
Issue #3984
Even though the binary patching of ldso must be performed only once,
this postprocessing step was executed on each run because the
postprocess.tag rule is phony (the tag file is never created).
This patch removes this phony behavior by creating the tag file.
Issue #3974
The _crt0_start_stack label points to a memory location containing the
size of the bootstrap stack. On AArch64 this should be an 8 byte value,
but the code only only defines half of those using asm .long statement.
The other half is expected to be 0, which is true when using GNU as.
This is not the case when using clang's integrated as however. Since
_crt0_stack_size is defined inside .text section clang uses 0xd503201f
value (aarch64 nop instruction) to fill the extra 4 bytes.
Fix this minor incompatibility by explicitly defining both halfs of
this 8 byte quantity.
Fixes#3987
The _dispatch_pending_io_signals and _original_suspended_callback member
variables are not used anywhere in the code. This prompts clang to produce
a warning message about it. Remove both variables to fix it.
Issue #3985
The "unsigned Nitpicker::Gui_session::layer()" function returns
~0UL. This prompts clang to produce a warning about implicit unsigned
long to unsigned int conversion. Fix it by returning ~0U instead of
~0UL.
Issue #3985
GCC doesn't care, but clang complains if [[fallthrough]] is not followed
by a semicolon. Existing Genode code is also not consitent in this regard.
This patch adds the extra semicolons since it works in both GCC and
clang.
Issue #3985
No code in this class uses this private member variable. This prompts
clang to produce a warning message about it. Fix it by dropping the
variable.
Issue #3985
The class has final destructor, but is not itself final. This prompts
clang to produce the following warning message:
class with destructor marked 'final' cannot be inherited from [-Wfinal-dtor-non-final-class]
~Vfs_plugin() final { }
^
vfs_plugin.h:39:13: note: mark 'Libc::Vfs_plugin' as 'final' to silence this warning
Issue #3985
This static inline function is not used anywhere. GCC does not care,
but clang warns about this. Remove the function to allow the code to
compile cleanly with both clang and GCC.
Issue #3985
The code in Libc::Cloned_malloc_heap_range initializes its local_addr
member variable by calling Region_map::attach_at. This function can
throw Region_conflict exception. The handler for this exception uses the
local_addr to produce an error message. Such error log is IHMO
useless, or even incorrect since the value of local_addr is undefined
in such case.
Its also worth noting that clang 12 produces the following warning for
this code:
"cannot refer to a non-static member from the handler of a constructor
function try block"
Issue #3985
This private member variable is not used anywhere in the code. This
produces compilation warning when using clang instead of GCC. Drop the
unused variable.
Issue #3985
The State enum and _state private member variable are not used anywhere.
This produces an extra warning when building the code with clang instead
of GCC. Remove this dead code.
Issue #3985
When building the code with clang the following warning message is
prodiced:
"explicit instantiation of 'Scout::Browser_window' must occur in namespace 'Scout'
template class Browser_window<Genode::Pixel_rgb888>"
This happens for several different types. This patch fixes the problem
by instantiating all those templates using their explicit full name.
Issue #3985
The Scout::Spacer constructor requires two arguments. The initialization
of the type in Launchpad_window declaration does not specify them. The
variable is however initialized a second time in class constructor. This is
most likely why GCC accepts this code. Clang on the other hand
complains about it.
Fix this by properly initializing both _spacer and _docview only once at
declaration time.
Issue #3985
The code fails to build with clang due to the following warning/error:
error: '_INCLUDE__NANO3D__SQRT_H_' is used as a header guard here,
followed by #define of a different macro [-Werror,-Wheader-guard]
Fix this by removing the extra underscore from this header guard
definition.
Issue #3985
The _device_specific_features() implements part of the Virtio_device
interface. Decorate it with override keyword to make this clear and
also satisfy clang which produces warning regarding this.
Issue #3984
Clang 11 produces the following warning when building port_allocator.cc:
port_allocator.cc:27:21: error: result of comparison of constant 65536 with
expression of type 'const Genode::uint16_t' (aka 'const unsigned short') is
always true [-Werror,-Wtautological-constant-out-of-range-compare]
(port.value < (unsigned)(Port_allocator::FIRST +
Basically the code compares Port::value (uint16_t) against a constant
65536 which is larger than UINT16_MAX (65535). This comparison will always
be true.
Issue #3984
According to clang there are two symbols which File_system can refer to:
1. namespace File_system from ram_fs/chunk.h.
2. Vfs::File_system class from vfs/file_system.h.
Make it clear we refer to the File_system namespace in this case.
Issue #3984
Clang 12 complains that Interface can both refer to Genode::Interface
and Net::Interface in this case. Explicitly state the code refers to
the latter.
Issue #3984
According to GNU as manual the syntax of this directive is:
.cfi_undefined register
The manual does not mention the register should be in parentheses.
This works in GNU as even when those are present, but unfortunately
clang integrated-as does not parse this correctly. Both GNU and
clang's integrated assembler work fine when the extra parentheses
are omitted.
Fixes#3986
The code in base-hw/src/bootstrap/platform.cc uses segment flags for
identification purposes. Based on this information the code decides
what to do with each segment. Unfortunately the linker script does
not actually ensure the flags for a specific named segment match
expectations. The code relies on implicit linker behaviour.
This implicit behaviour can vary between linkers. This breaks
arm_v7a base-hw builds linked with LLVM's lld linker. The segment
named "ro" ends up having writeable flag set when using LLD.
This patch ensures that all ELF segments in genode.ld have their
required perimssion flags set explicitly.
Fixes#3988
Clang is generally fine with Genode::List and compiles code using it
without emitting any warnings. There is however one exception. Clang
fails hard when building base-hw/src/core/kernel/object.cc.
This is due to a call to Genode::List::remove made from
Object_identity::invalidate function. The error message clang
produces is:
list.h:96:33: error: 'Genode::List<Kernel::Object_identity_reference>::Element::_next'
is not a member of class 'const Kernel::Object_identity'
_first = le->List::Element::_next;
~~~~~~~~~~~~~~~^
When we look at the declaration of the Kernel::Object class on which
the remove method is called. as expected it does inherit Genode::List:
using Object_identity_list
= Genode::List<Kernel::Object_identity>;
class Kernel::Object : private Object_identity_list
{
...
}
Given the error message we see that List::Element should be resolved to
Genode::List<Kernel::Object_identity>::Element, and not
Genode::List<Kernel::Object_identity_reference>::Element. But how does
clang manage to figure out we're talking about Object_identity_refecence
list here? Well, I admit I don't know the exact steps it takes to arrive
at this conclusion, but it is not entirely wrong. If we take a look at
what Kernel::Object_identity is we'll see:
class Kernel::Object_identity
: public Object_identity_list::Element,
public Kernel::Object_identity_reference_list
{
...
}
Where as one can guess Object_identity_reference_list is defined as:
using Object_identity_reference_list
= Genode::List<Object_identity_reference>;
Long story short Kernel::Object has Genode::List of both Kernel::Object_identity
and Kernel::Object_identity_reference in its inheritance chain and clang
is not really sure to which of those the code refers to in
Genode::List::remove method by using List::Element::.
The fix for this is relatively simple, explicitly state the full type of
the base class the code intends to refer to. Replacing List::Element,
with List<LT>::Element makes the code buildable with both clang and GCC.
Fixes#3990
If a fd is opened in append mode and just is to be used (so never written by
the parent component) for the to be forked child, the seek state was not
pointing to the end of the file. The wrong seek value then was used in
File_descriptor_allocator::generate_info().
Issue #3991
The fds in O_APPEND state may have changed by the child. The local seek
state needs to be valid/current for the next to be forked child, which seek
state is set by File_descriptor_allocator::generate_info().
Issue #3991
Avoid use of REP_DIR in *.mk files to simplify the use of these files as
templates for a board hosted in a separate repository.
Use REP_INC_DIR for searching headers, thereby considering headers
hosted in an external repository.
Issue #3168
This trace policy can be used as a fault-injection mechanism.
Once installed, the next time the traced thread passes a trace point
(e.g., RPC call, RPC request, ...), the policy produces a divide-by-zero
exception.
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
The new helper function returns a boolean value analoque to 'have_spec' if the
BOARD variable corresponds to the given value. It shall replace [have_spec <board>]
declarations in run-scripts.
Ref #3971
In order to perform a smooth transition from NIC drivers that act only as NIC
session clients to NIC drivers that act only as Uplink session clients, this
commit introduces an intermediate state in which all NIC drivers support both
modes. That said, a NIC drivers mode is now statically determined through a new
optional 'mode' attribute in the drivers <config> tag that can be set to either
'nic_server' (default value) or 'uplink_client'. Reconfiguring this attribute
at a driver doesn't have any effects. Whithout this attribute being set, all
NIC drivers will behave the same as they did before the commit. When set to
'uplink_client', however, instead of providing a Nic service, they request
an Uplink session whenever their network interface becomes "UP" and close the
session whenever their network interface becomes "DOWN".
Ref #3961
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Adds new Uplink session interface, the corresponding client side (Client,
Connection), and the corresponding API archives. An Uplink session is almost
the same as a NIC session with the difference that the roles of the end points
are swapped. An Uplink client is the one that provides a network interface
(for instance, a NIC driver) whereas an Uplink server is the one that uses
that network interface (for instance, a networking stack).
Therefore, in contrast to the NIC session, MAC address and link state come from
the Uplink client. The link state is reflected through the lifetime of an
Uplink session: The client requests the session only when the link state is
"UP" and closes it whenever the link state becomes "DOWN" again. The MAC
address is transmitted from the Uplink client to the Uplink server as an
argument of the session request.
Ref #3961
* Adds documentation how to prepare and finalize a Linux for running the
scenario ontop of it
* Adds consideration of env variable 'ON_LINUX_WITH_DST_IP' that, if set,
adapts the run script to running on Linux with the given ping destination IP
Ref #3961
This patch relaxes the need to specify the rom content of all pkg dependencies
in each runtime file. Whenever a dependency features a runtime file, the
contained <content> <rom/> ... </content> nodes are implicitely included.
Fixes#3981
- depending on available PCI power cap power off and on
- save and restore PCI bars if required
- reset PCI devices after power on if supported
Fixes#3963
using Register_set && Register. It is derived from Genode::Mmio, however uses
as backend the Config_access implementation which is still used widely in
the platform driver.
Issue #3963
Replace explicit usage of bus, device, function arguments to methods or
variables all over the code by a single data type. It eases the reading of and
shorten the code.
Issue #3963
The keys, mute, touchpad toggle (Fn-F4) and rfkill may be reported by some
Fujitsu machines via the ACPI FUJ02E3 ACPI device. With this commit limited
support to detect the 3 keys are added and will be reported as Genode report.
This patch complements the commit "nitpicker: defer hover changed while
dragging" with fixes of the window layouter and motif decorator.
- Handling of empty pointer model (after unhovering a decoration)
instead of not updating it.
- Re-applying the hover model to the window layout when leaving the
drag state. This addresses the corner case that the hover model
changed during the drag operation (which is rightfully not handled
while dragging).
- Letting the window layouter enter the drag state only if a dragged
window is defined.
Issue #3973
When holding at least one key or button, the hovering should never
change. In the previous version, this invariant was not enforced,
but the symptoms for eventual inconsistencies were masked by two
checkes: one when generating the hover report, and one when submitting
the leave event. This patch enforces the invariant by suppressing any
change of 'User_state::_hovered' while in dragged state.
Fixes#3973
When idle, the decorator still consumes a bit of CPU time when triggered
by the GUI session's sync signal. This patch installs the sync handler
each time the decorator goes idle.
During position scaling use the location width/height which is the permitted
dimension within the child space, instead of using the whole possible
child space. (Fixup for "init: scale affinity location" Issue #1412)
Thanks to the report by Peter.
* Introduce 'use_arp' configuration flag at the NIC router in order to disable
requesting IP-to-MAC address resolutions via ARP for domains.
* Add automated run/nic_router_disable_arp test to the autopilot that tests
the effect of the new flag
* Document the new flag and the new test in the NIC router README
Fixes#3935
Thise driver supports USB LTE modems for Huawais' ME906s through MBIM
and provides a traditional Nic session. The "control" interface is a
Terminal session, which can be used via libmbim/mbimcli.
issue #3822
This commit restores the diag feature for selecting diagnostic output of
services provided by core. This feature became unavailable with commit
"base: remove dependency from deprecated APIs", which hard-wired the
diag flag for core services to false.
To control this feature, three possible policies can be expressed in a
routing target of init's configuration:
* Forcing silence by specifying 'diag="no"'
* Enabling diagnostics by specifying 'diag="yes"'
* Forwarding the preference of the client by omitting the 'diag'
attribute
Fixes#3962
- Vendor devices add addtional data to the config descriptor, read and
added to the usb session
- allow '0' configuration within the usb session
issue #3822
The usb_hid driver does not need to distinguish between
normal memory and DMA capable memory, since all requests are routed via the
USB raw session to the usb host driver. The default Malloc implementation
implements this distinction, however exposes restrictions on the size of
allocations. As seen now by several USB HID devices, the size of device
driver allocations depend on read out hardware features and can be
larger than we support with our specialized default Malloc implementation.
Since we don't need this functionality, switching to an well
tested allocator (Heap) which can cope with varying sizes of allocation,
we can mitigate the size restriction.
Fixes#3953
* The NIC router now considers, memorizes, and, if configured, reports
multiple DHCP option 6 entries from DHCP replies that it received as DHCP
client
* A DHCP server at the NIC router can now be configured statically with
multiple DNS server addresses to propagate
* The 'dns_server_from' attribute of the DHCP server of the NIC router now
supports the forwarding of multiple DNS server addresses
* The automated run/nic_router_dhcp test tests all the above mentioned new
functionality and reconfiguring it at runtime. The test was added to the
autopilot.
* All run scripts were adapted to fit the new NIC router configuration
interface
Fixes#3952
When reconfiguring the NIC router modifies the information that DHCP clients
received through a DHCP server of the NIC router, the link state of the
correspodning interface has to do a "down-up" sequence. This provides a signal
to the DHCP clients to redo DHCP, receive the new information and update
accordingly.
Fixes#3931
* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
* Introduce sculpt-[board] specific package
* Move rtc driver into managed drivers sub-system
* Name nic_drv in a generic fashion in sculpt_manager
* Copy over pc-specific config files only when building for PC
Ref #3958
Originally the outgoing buffer was flush when the terminal was
detached. Since we cannot do that at this point, make the flushing
part of the common cleanup procedure.
Issue #3682.
Rather than calling 'ssh_disconnect' from within the Terminal session,
flag the detached terminal in the session and let the event loop do the
cleanup. Otherwise it might happen that the 'ep' (handling the Terminal
session) as well as the 'pthread.0' (executing the ssh event loop) end
up both triggering the cleanup concurrently.
Issue #3682.
In case of arm_v7a Kernel::call64 the syscall will use both r0 and r1 as
output registers. Unfortunately the inline asm does not reflect this and
only r0 is explicitly specified as output. GCC manages to produce output
which we'd like to see. Clang on the other hand takes adventage of the fact
r1 should not be touched by swi and produces fewer instructions which do
what the code describes, but not what we actually want.
Basically the code which we want and is generated by GCC is:
svc 0
mov r2, r0
mov r0, r1
mov r1, r2
bx lr
Clang on the other hand generates correct assembly given the code, but
incorrect given what the function is supposed to do:
svc 0
mov r1, r0
mov r0, #0
bx lr
Both GCC and clang generate the same, expected assembly output when r1
is marked as output register from the inline asm swi call.
Fixes#3951
Clang correctly asserts this private member variable is not used
anywhere in the code. I'm not sure what the intention of the code is,
might be this is a part of some unfinished feature. This patch just does
the minimum amount of work to allow the code to build with clang. If
required I can also drop the parent_levels constructor argument and
clean up the call sites.
Issue #3950
The msg argument in Genode::Rpc_dispatcher::_read_arg is not used. GCC
does not care about this, but clang does and prints a warning regaring
this. Silence it by removing unused argument name.
fixup! base: Silence unused arg warning in rpc_server.h
The CBE repository contained a lot of Genode-specific code despite the fact
that the CBE core logic is not bound to Genode in any way. Therefore the
Genode-specific CBE code is moved to the 'gems' repository to form part of
Genode mainline. The remaining CBE code becomes a port in Genode instead of
being invoked as sub-repository.
The commit combines the following work steps:
* add all files removed from CBE repository
* add CBE port files
* make all CBE libs and targets build again
* make all CBE run scripts succeed again
* make all CBE recipes build again
* make CBE autopilot succeed again
* let CBE autopilot use 'libsparcrypto' contrib dir and Genode build dir
instead of '.ci' dir in CBE contrib dir (remove '.ci' dir from CBE repo)
* let CBE autopilot always check for all ports
* make CBE autopilot directly executable
* fix license headers in all Genode CBE files
* remove unused VFS replay component
* remove unused CBE test
* remove unused external crypto
* remove unused files in run dir
* remove unused external trust anchor
* add cbe_tester test to autopilot list
* get rid of directories 'include/cbe_*' and 'include/utils'
Fixes#3937
The control area is constructed during session creation and the caller can
handle the Out_of_* exception by increasing the quota by the next attempt.
Fixes#3917
Log a warning when the lwIP VFS plugin queues a read while waiting
for an interface to become ready. By comparision the Lxip plugin
has the same behavior but a more verbose initialization process.
Fix#3920
Account for the situation where the driver is started while the HP
is already plugged in and configure the mixer accordingly.
Thanks to Peter for the patch.
Issue #3929.
Due to what seems like a copy-and-paste error, the wrong union member
was used to compare the label. Fortunately, as both structs have the
same memory layout that did not result in any issue.
Issue #3929.
Originally, the kernel code should have been executed within the
context of the main task like it is done in dde_linux. The initial
port of the HDA driver, however, did not required doing so and the
session called code directly.
When using USB device, that is no longer possible as we have to
suspend the execution during the execution of the kernel code. So
we pass in the audio data and schedule the kernel.
Fixes#3929.
This becomes necessary in case of the USB audio driver where we have
to wait for and query the function first.
That being said, alternatively we could also announce the session but
ignore any request until there is a device we can use.
Issue #3929.
With this commit the timer back-end uses the timeout framework to
schedule any occuring timeouts and for providing the current time.
For now there is only one timeout, the unsolicited azlia codec event
and therefore the timeout queue consists of solely one timeout object.
In addition a timer session is used for implementing 'delay()' where
we have to block until the delay is completed.
Issue #3929.
For historical reason the 'strlcpy' implemention was directly pull in
into the emulation environment. There is, however, no reason not to
use the contrib sources in the usual fashion.
Issue #3929.
Instead of the generic name, call the PCI driver 'pci_audio_drv'.
This is preliminary clean-up work before introducing the USB audio
driver.
Issue #3929.
