Instead of fixing the missing dynamic facilities of the AHCI driver
backends for x86 and Exynos5, just avoid to create/destroy the backend
for every new connection, but always use one and the same object.
The AHCI drivers need to be re-written anyway, see issue #1352 for instance,
we can make it more robust for the dynamic case then.
Fixes#786Fixes#1133
This has to be used during shared object creation and destruction because global
lists are manipulated. We cannot use the 'Elf_object::lock' here because there
may be jump-slot relocations during object initialization.
Fixes#1350
When building Genode for VEA9X4 as micro-hypervisor protected by the ARM
TrustZone hardware we ran into limitations regarding our basic daily
testing routines. The most significant is that, when speaking about RAM
partitioning, the only available options are to configure the whole SRAM
to be secure and the whole DDR-RAM to be non-secure or vice versa. The
SRAM however provides only 32 MB which isn't enough for both a
representative non-secure guest OS or a secure Genode that is still
capable of passing our basic tests. This initiated our decision to
remove the VEA9X4 TrustZone-support.
Fixes#1351
On VEA9X4-TZ, the context-area overlaps with the virtual area of the
text, data and bss. However, we can't simply change the link address as
the core image (used physically respectively 1:1 mapped) needs to be in
this particular RAM-region as it is the only one that can be protected
against a VM. Thus I've moved the context area to a place where it
shouldn't disturb any HW-platform.
Fixes#1337
Declaring the SP804 0/1 module and its interrupt to be non-secure prevents the
secure Genode from receiving the interrupt and hence the timer driver in the
secure Genode doesn't work.
Fixes#1340
The commit uses a fixed kernel branch (r8), which fixes a caching bug
observable in the Genode host. The quirk detecting the circumstance in the
timer service is obsolete now and is removed.
Fixes#1338
The commit
- fixes the syscall bindings for using portal permissions
- revokes PT_CTRL permission after pager in core set local badge name
- revokes PT_CTRL permission after server entrypoint code set local badge name
Fixes#1335
This fix configures TTBRs and translation-table descriptors as if we would use
SMP although we don't to circumvent problems with UP-configurations.
This fix should be superseded later by full SMP support for the VEA9X4.
ref #1312
The HW-kernel, in contrast to other kernels, provides a direct reference
to the pager object with the fault signal that is send to the pager
activation. When accessing this reference directly we may fall into the
time span where the root parent-entrypoint of the faulter has alredy
dissolved the pager object from the pager entrypoint, but not yet
silenced the according signal context. To avoid this we issue an
additional 'lookup_and_lock' with the received pager object. This isn't
optimal as we don't need the potentially cost-intensive lookup but only the
synchronization.
Fixes#1311.
Fixes#1332.
- essential support for 7260 chipset and DMA fixes
- assign mvm->pm_ops at beginning of function iwl_op_mode_mvm_start.
iwl_mvm_mac_setup_register() uses mvm->pm_ops, but it is called
before this field is set to a valid value.
- disable call to function iwl_mvm_prepare_multicast.
This function leads to a pagefault, as it aspects a list of multicast
addresses, but the list is empty as it is not generated by this port.
On base-hw, each thread owns exactly one scheduling context for its
whole lifetime. However, introducing helping on IPC, a thread might get
executed on scheduling contexts that it doesn't own. Figuratively
spoken, the IPC-helping relation spans trees between threads. These
trees are identical to those of the IPC relation between threads. The
root of such a tree is executed on all scheduling contexts in the tree.
All other threads in the tree are not executed on any scheduling context
as long as they remain in this position. Consequently, the ready-state
of all scheduling contexts in an IPC-helping tree always equals the
state of the root context.
fix#1102
As soon as helping is used, a thread may also be in a blocking state when its
scheduling context is ready. Hence, the state designation SCHEDULED for an active
thread would be pretty misleading.
ref #1102
If the debug branch of the nova kernel is used, following messages are printed
by the kernel during vCPU setup phase:
[0] overmap attempt OBJ - tree - ...
Fixes#1324
The context of timer are now inserted correctly and the actual timer
triggering the exection of each context is always programmed if the
head of the timer list changes.
Fixes#1326.
The jiffies are only updated on each round of scheduling the runnable
tasks. We have to schedule the current task that executes the sleep
call to update the jiffies count and thereby preventing the task from
entering an endless loop when using a statement like
'while (!time_after(jiffies, now + timeout)) { msleep(1); }'.
Related to #1326.
Instead of probing all device on the PCI bus just look for devices
matching PCI_CLASS_NETWORK_OTHER. This fixes issues with other devices
on the PCI bus, e.g. the GPU, when access their extended config space.
Related to #1326.
Setting explicit routes for Nitpicker's 'Framebuffer' and 'Input' sessionsi
avoids ambiguities if a Qt application provides these services, too.
Fixes#1316
With this patch, when calling 'setFocus()' on a QNitpickerViewWidget, the
Nitpicker view gets the input focus (provided that the parent Qt window
already had it).
Fixes#1314
Until now, the successful termination of the boot process was recognized
when 'expect' saw the first L4 bootstrapper output on serial line. On sytems
with initially shaky serial connection like Versatile Express, where the serial
line baudrate changes with the bootstrapper initialization, the first expected
line might be missing. Therefore, change the expected line to the first
Fiasco.OC kernel output.
This wasn't necessary before because we built an l4 library for
Pistachio and linked it against each application. With the new linker,
we compile the required files from within Genode and create a syscall
library that is only linked to ldso. If a program uses system calls
directly, for example, DDE kit's spinlock implementation, the required
symbols must be made globally accessible.
Fixes#1306
On the Versatile Express Cortex A9x4 platform the first memory region
0x0 - 0x4000000 is a hardware remapped memory area, containing flash
and DDR RAM copies and thus should not be added in addition to all
DDR RAM regions and the SRAM region.
In the init configuration one can configure the donation of CPU time via
'resource' tags that have the attribute 'name' set to "CPU" and the
attribute 'quantum' set to the percentage of CPU quota that init shall
donate. The pattern is the same as when donating RAM quota.
! <start name="test">
! <resource name="CPU" quantum="75"/>
! </start>
This would cause init to try donating 75% of its CPU quota to the child
"test". Init and core do not preserve CPU quota for their own
requirements by default as it is done with RAM quota.
The CPU quota that a process owns can be applied through the thread
constructor. The constructor has been enhanced by an argument that
indicates the percentage of the programs CPU quota that shall be granted
to the new thread. So 'Thread(33, "test")' would cause the backing CPU
session to try to grant 33% of the programs CPU quota to the thread
"test". By now, the CPU quota of a thread can't be altered after
construction. Constructing a thread with CPU quota 0 doesn't mean the
thread gets never scheduled but that the thread has no guaranty to receive
CPU time. Such threads have to live with excess CPU time.
Threads that already existed in the official repositories of Genode were
adapted in the way that they receive a quota of 0.
This commit also provides a run test 'cpu_quota' in base-hw (the only
kernel that applies the CPU-quota scheme currently). The test basically
runs three threads with different physical CPU quota. The threads simply
count for 30 seconds each and the test then checks wether the counter
values relate to the CPU-quota distribution.
fix#1275
Do not support the global construction from of objects from within a global
constructor of another object. This can happen if, for example, dlopen is called
from a global constructor. The construction will be post-boned until the current
constructor has finished.
On Arndale, the kernel timer resets to the initial value of the last
count-down and continues as soon as it reaches zero. We must check this
via the interrupt status when we read out the timer value and in case
return 0 instead of the real value.
fix#1299
The way this function is currently used in dde_linux expects this
function to return. Since there is dde_kit_panic it should better
be used in such a case the output should block.
Kernel::Processor was a confusing remnant from the old scheme where we had a
Processor_driver (now Genode::Cpu) and a Processor (now Kernel::Cpu).
This commit also updates the in-code documentation and the variable and
function naming accordingly.
fix#1274
The run test 'hw_info' prints the content of the basic ARMv7 identification and
feature registers in a pretty readable format. It is a kernel-internal test
because many of these registers are restricted to privilege level 1 or higher.
fix#1278
The new scheduler serves the orthogonal requirements of both
high-throughput-oriented scheduling contexts (shortly called fill in the
scheduler) and low-latency-oriented scheduling contexts (shortly called
claim in the scheduler). Thus it knows two scheduling modes. Every claim
owns a CPU-time-quota expressed as percentage of a super period
(currently 1 second) and a priority that is absolute as long as the
claim has quota left for the current super period. At the end of a super
period the quota of all claims gets refreshed. During a super period,
the claim mode is dominant as long as any active claim has quota left.
Every time this isn't the case, the scheduler switches to scheduling of
fills. Fills are scheduled in a simple round robin with identical time
slices. Order and time-slices of the fill scheduling are not affected by
the super period. Now on thread creation, two arguments, priority and
quota are needed. If quota is 0, the new thread participates in CPU
scheduling with a fill only. Otherwise he participates with both a
claim and a fill. This concept dovetails nicely with Genodes quota based
resource management as any process can grant subsets of its own
CPU-time and priorities to its child without knowing the global means of
CPU-time and priority.
The commit also adds a run script that enables an automated unit test of the
scheduler implementation.
fix#1225
To serve the needs of the coming CPU scheduler, the double list needs
additional methods such as 'to_tail' and 'insert_head'.
The commit also adds a run script that enables an automated unit test
of the list implementation.
ref #1225
Kernel tests are done by replacing the implementation of an otherwise
empty function 'Kernel::test' that gets called once at the primary CPU
as soon as all kernel initialization is done. To achieve this, the test
binary that implements 'Kernel::test' must be linked against the core
lib and must then replace the core binary when composing the boot image.
The latter can be done conveniently in a run script by setting the new
argument 'core_type' of the function 'build_boot_image' to the falue
'test'. If no kernel test is needed the argument does not have to be
given - it is set to 'core' by default which results in a "normal"
Genode image.
ref #1225
Previously, Idle_thread inherited from Thread which caused an extra
processor_pool.h and processor_pool.cc and also made class models for
processor and scheduling more complex. However, this inheritance makes
not much sense anyway as an idle context doesn't trigger most of the code
in Thread.
ref #1225
The memory barrier prevents the compiler from changing the program order
of memory accesses in such a way that accesses to the guarded resource
get outside the guarded stage. As cmpxchg() defines the start of the
guarded stage it also represents an effective memory barrier.
On x86, the architecture ensures to not reorder writes with older reads,
writes to memory with other writes (except in cases that are not
relevant for our locks), or read/write instructions with I/O
instructions, locked instructions, and serializing instructions.
However on ARM, the architectural memory model allows not only that
memory accesses take local effect in another order as their program
order but also that different observers (components that can access
memory like data-busses, TLBs and branch predictors) observe these
effects each in another order. Thus, a correct program order isn't
sufficient for a correct observation order. An additional architectural
preservation of the memory barrier is needed to achieve this.
Fixes#692
GCC 4.7.4 and newer seems to optimize the lock-variable accesses more
radically, which uncovered the missing volatile qualifier and resulted
in:
Assertion "(int)locked >= 0" failed in file '.../okl4_x86/kernel/include/kernel/read_write_lock.h', line 151 (fn=f0104771)
--- "KD# assert" ---
Invalidating all branch predictors before switching the PD
fixes instability problems on Panda and has not much effect
on the performance of other boards. However, we neither know why
this is a fix nor wether it fixes the real cause of the problem.
fix#1294
Previously, the timer was used to remember the state of the time slices.
This was sufficient before priorities entered the scene as a thread always
received a fresh time slice when he was scheduled away. However, with
priorities this isn't always the case. A thread can be preempted by another
thread due to a higher priority. In this case the low-priority thread must
remember how much time he has consumed from its current time slice because
the timer gets re-programmed. Otherwise, if we have high-priority threads
that block and unblock with high frequency, the head of the next lower
priority would start with a fresh time slice all the time and is never
superseded.
fix#1287
Some SDL applications expect the SDL_image headers in include/SDL to be
reachable without the SDL/ prefix. This patch adds the corresponding
search path. Furthermore it enables support for XPM images.
Ported drivers list and extract all needed source files. This decouples
ports according to contrib sources and also enables us to revert lxip to
Linux version 3.9, while staying with 3.14 for usb.
Fixes#1285
The manpage to errno tells the following story:
The <errno.h> header file defines the integer variable errno, which is
set by system calls and some library functions in the event of an error
to indicate what went wrong. Its value is significant only when the
return value of the call indicated an error (i.e., -1 from most system
calls; -1 or NULL from most library functions); a function that
succeeds is allowed to change errno.
Valid error numbers are all nonzero; errno is never set to zero by any
system call or library function.
When the 'Mtd::FPU' flag is set during the registration of a
virtualization event handler, it must also be set whenever the event
handler returns.
Fixes#1283
This patch ensures that priority values passed as session arguments
are within the valid range of priorities. Without the clamping, a child
could specify a priority of a lower priority band than the one assigned
to the subsystem. Thanks to Johannes Schlatow for reporting this issue.
Fixes#1279
This is just a quick fix to calm down the buildbot - a revised
implementation is needed according to issue #1277. Further, the reason
for the increased test duration on several platforms must be
investigated.
The alias is rather Linux-specific and also prevents particularly
tailored jiffies implementations. For the existing dde_linux ports (usb
and lxip) we just define jiffies to be dde_kit_timer_ticks with a
preprocessor macro.
The menu view generates a simple dialog of widgets and reports the
hovered element. It is meant to be embedded into applications that
require simple GUIs but don't want to deal with the pecularities of
a full-blown widget set.
The new 'session_control' function can be used to perform operations on
the global view stack that span one or multiple sessions, e.g., bringing
all views of specific sessions to the front, or hiding them.
If the Rom_session::update function returns false, the ROM dataspace may
have been physically destructed (and core has removed all mappings).
In this case, we have to omit the detach operation in the destructor
of 'Attached_dataspace' to avoid detaching the same region twice.
The headers 'texture_rgb565.h' and 'texture_rgb888' contain
template specializations needed for using the 'Texture::rgba' function
for the respective pixel formats. The specializations were formerly
contained in application-local code.
This patch add an optional alpha argument to the constructor, which may
be passed to a pixel type representing an alpha channel. Furthermore,
a new overload of the mix function has been added to accommodate use
cases where one texture is applied to both a pixel surface and an alpha
channel.
When X-ray mode is active, nitpicker filters motion events that are not
referring to the currently focused domain. However, domains configured
as xray="no" (such as a panel) need to obtain motion events regardless
of the xray mode. This patch relaxes the motion-event filtering to
accommodate such clients.
The buffer offset was wrongly accounted for. The miscalculation went
unnoticed until now because the buffer offset was apparently never used
in combination with alpha-channels.
If a domain is configured as xray="no", we want to let the views of the
domain respond to input events like in flat mode, even if xray mode is
active. Normally, the input mask of views with an alpha channel is
disregarded in X-ray mode. However, for non-ray views, the input mask
should always be considered.
The 'Signal_rpc_member' takes care about dissolving its signal context
from the receiver. So we don't need to manually perform this operation
in the session destructor.
With this patch, the VESA driver chooses the video mode with the highest
resolution from the list of available modes if no resolution is
explicitly configured.
Fixes#1263.
* use seoul branch containing vbios emulator
* report the memory model in the VBE mode info as otherwise the
Genode framebuffer driver will ignore this mode
Fixes#1261
It turned out that the controller configuration can change during the self
tests, so now it is read before running the tests and restored afterwards.
Fixes#1260.
This component merges the input events of multiple sources.
Example configuration:
<start name="input_merger">
<resource name="RAM" quantum="1M" />
<provides>
<service name="Input" />
</provides>
<config>
<input label="ps2" />
<input label="usb_hid" />
</config>
<route>
<service name="Input">
<if-arg key="label" value="ps2" /> <child name="ps2_drv" />
</service>
<service name="Input">
<if-arg key="label" value="usb_hid" /> <child name="usb_drv" />
</service>
<any-service> <parent /> <any-child /> </any-service>
</route>
</start>
For each 'input' config node, the component opens an 'Input' session with the
configured label. This label is then evaluated by 'init' to route the session
request to a specific input source component.
Fixes#1259.
* When flushing the data and unified cache on ARM, clean and invalidate
instead of just cleaning the corresponding cache lines
* After zero-ing a freshly constructed dataspace in core, invalidate
corresponding cache lines from the instruction cache
The backend allocator for the slab is a sliced heap, which hands out
allocations with page-size granularity (4096 bytes). Therefore, the
slab-block size should also be about a multiple of the page size minus
some bytes of overhead.
Additional adjustments:
- The slab-block size and the default quota-upgrade amount for SIGNAL
sessions depends on the platform bit width now.
- The signal test also stresses the case of many managed context in one
session including creation and destruction of the used signal receiver
in repeated rounds.
- correctly catch and report non-existing root directories
- remove *all* leading slashes from root-directory attributes and
sanitize empty declarations to current working directory
The weak implementation was added for quite special purposes years ago
and is no longer needed. On the other hand, the weak attribute does not
help if the implementation ends up in a shared library, which first
resolves symbols locally before asking ldso (that includes the acutal
thread library) *shiver*
The original git:// URL produced the following error:
Cloning into 'jbig2dec'...
fatal: remote error: access denied or repository not exported: /jbig2dec.git
Before the pointer handling was removed from the nitpicker server, the
pointer was always the first view, which was skipped in the find_view
function. However, since we support pointer-less operation by now, we
have to consider all views starting with the top-most one.
The port was succesfully tested a echo test and lighttpd. DHCP over
OpenVPN is not tested and probably will not work out of the box.
Therefore, the ip address etc. need to be specified manually.
For now, only ethernet bridging (using a TAP device) is supported.
Fixes#1235.
This commit adds a port the jitterentropy library to Genode. As
backend on x86_{32,64} 'rdtsc' is used and on ARMv{6,7} the
performance-counter.
Fixes#1239.
These file systems are provided on-demand by loading a shared library
when the fstab node is traversed. By convention this library is named
after the file system it provides. For example a file system that
provides a 'random' file system node is called 'vfs_random.lib.so'. It
is still possible to give the the node another name in the vfs. The
following code snippts illustrates this matter:
! [...]
! <config>
! <libc>
! <vfs>
! <dir name="dev"> <jitterentropy name="random"/> </dir>
! </vfs>
! </libc>
! </config>
! [...]
Here the jitterentropy file system, implemented in
'vfs_jitterentropy.lib.so' provides a file system node named 'random'
in the 'dev' directory. When traversing the vfs section the libc will
try to load 'vfs_jitterentropy.lib.so' but programs may access the
file system only via '/dev/random'.
Fixes#1240.
This patch fixes a potential race condition that could happen if a
client connects to nitpicker before the signal for the import of the
initial configuration was delivered. In this case, nitpicker would be
unable to assign a domain to the session (because this information comes
from the configuration), rendering subsequent calls to 'mode' invalid.
The patch solves this problem by manually calling the signal handler
for importing the configuration.
This provides bootable disk images for x86 platforms via
! RUN_OPT="--target disk"
The resulting disk image contains one ext2 partition with binaries from
the GRUB2 boot loader and the run scenario. The default disk size fits
all binaries, but is configurable via
! --disk-size <size in MiB>
in RUN_OPT.
The feature depends on an grub2-head.img, which is part of the commit,
but may also be generated by executing tool/create_grub2. The script
generates a disk image prepared for one partition, which contains files
for GRUB2. All image preparation steps that need superuser privileges
are conducted by this script.
The final step of writing the entire image to a disk must be executed
later by
sudo dd if=<image file> of=<device> bs=8M conv=fsync
Fixes#1203.
After modifying mode transition for branch prediction tz_vmm wasn't
working anymore on hw_imx53_tz but the modifications had nothing to do
with the VM code. However, the amount of instructions in the MT before the
VM exception-vector changed. So I tried stuffing the last working version with
NOPs and found that tz_vmm worked for some NOP amounts and for others not.
Thus, I increased the alignment of the VM exception-vector from 16 bytes to 32
bytes, é voila, its working with any amount of NOPs as well as with branch
prediction commits.
ref #474
Previously, we did the protection-domain switches without a transitional
translation table that contains only global mappings. This was fine as long
as the CPU did no speculative memory accesses. However, to enabling branch
prediction triggers such accesses. Thus, if we don't want to invalidate
predictors on every context switch, we need to switch more carefully.
ref #474
The console included nitpicker_view headers, which were not used. The
headers vanished with the recent nitpicker API change, which broke the
build of seoul.
This patch reimplements the nit_fb server using the server API and
thereby enables the dynamic resizing the of the framebuffer.
Note that the new implementation does not feature the ability to perform
a periodic refresh via the 'refresh_rate' configuration argument. This
feature was removed because the refresh policy can (and should) always
be implemented on the client side.
The QPluginWidget used to be a QNitpickerViewWidget but the new loader
interface does no longer hand out a view capability. So we need to
decouple both classes. This patch moves the view-geometry calculation to
a separate class to make it easier reusable, in particular for the
QPluginWidget.
The window manager provides a nitpicker session interface. In contrast
to the nitpicker server, which leaves the view layout up to the client,
the window manager organizes the views on screen according to a policy
provided by a window layouter. Furthermore, it equips views with window
decorations as provided by a window decorator. Both layouter and
decorator are independent programs.
This patch adds support for the consecutive re-dimensioning the virtual
framebuffer. When changing the buffer size, the session gets upgraded by
the missing portion of the quota instead of donating the whole size of
the new buffer each time.
This patch introduces a way to tweak the coordinate systems per
domain. The 'origin' attribute denotes the origin of the coordinate
system. Valid values are "top_left", "top_right", "bottom_left",
"bottom_right", and "pointer". Furthermore, the screen dimensions as
reported to the nitpicker client can be tweaked per domain using the
'width' and 'height' attributes. If the specified value is positive,
it is taken as literal boundary. If the value is negative, the size
if deducted by the specified amount from the physical screen area.
This patch introduces a mandatory layer attribute to domains. The layer
ordering is superimposed on the stacking order of the views. The
top-most layer can be assigned to a pointer-managing client. An example
for such a pointer is located at os/src/app/pointer. It replaces the
formerly built-in nitpicker mouse cursor.
The new layering mechanism replaces the former "stay-top" session
argument. So the Nitpicker::Connection no longer takes the stay-top flag
as the first argument.
A session can be explicitly configured to present its views in a
completely opaque way when the X-ray mode is active as opposed to the
default where each view gets tinted and surrounded by a frame. This
is useful for decorator views, which look overly busy otherwise.
This patch introduces the notion of a "domain" to the nitpicker
configuration concept. Session policies always refer to a domain where
multiple session policies can refer to the same domain. Thereby a domain
provides a way to express the grouping of sessions. This is useful for
applications that open multiple nitpicker sessions (such as Qt5 apps that
use one nitpicker session per window, menu, etc.). We want to assign all
those sessions to a single domain.
The configuration looks as follows:
<config>
...
<domain name="default" color="#ffffff"/>
<policy label="" domain="default"/>
...
</config>
This patch changes nitpicker's session interface to use session-local
view handles instead of view capabilities. This enables the batching
of multiple view operations into one atomic update.
This patch introduces a focus-management facility to the nitpicker
session interface. As a side effect of this change, we remove the notion
of a "focused view". There can only be a "focused session". This makes
sense because input is directed to sessions, not views.
Issue #1168
This patch changes nitpicker's way of redrawing. Originally, redraw
operations were triggered immediately by the RPC functions invoked by
clients. In the presence of clients that invoked a large number of those
functions, the server could become overloaded with processing redraw
operations. The new version performs redraw operations out of band with
the RPC functions. Similar to the design of the DOpE GUI server, redraw
operations are processed periodically. The RPC functions merely modify
meta data and track the dirty areas that need to be updated.
Consequently, nitpicker's RPC functions become light-weight operations.
As a nice collateral effect of this patch, nitpicker's internal
structure could be simplified because the drawing backend is no longer
needed by the code that dispatches the RPC interface.
So far, the lifetime-management utilities 'Weak_ptr' and 'Locked_ptr'
had been preserved for core-internal use only. However, the utilities
are handy for many use cases outside of core where object lifetimes
must be managed. So we promote them to the public API.
The new Rom_session::update function can be used to request the update of
an existing ROM dataspace. If the new data fits into the existing
dataspace, a subsequent call of 'dataspace' can be omitted. This way,
ROM dataspace updates don't suffer from page-fault-handling costs that
would occur when replacing the dataspace with each update.
When calling 'sub_node' on a node with no sub nodes, the Xml_node would
interpret the characters after the current node while searching for sub
nodes. The patch adds a sanity check that lets the 'sub_node' function
throw an exception when called on a node with no sub nodes.
This patch makes the handling of constructor arguments consistent among
the Volatile_object and Lazy_volatile_object classes. Arguments are
always forwarded. Otherwise, passing a reference as argument would result
in an unwanted copy of the passed object.
Some session interfaces use session-local handles for referring to
server-side objects, e.g., a file-system session hands out file handles
to the client. The new 'Handle_registry' class template can be used to
associate numeric handles with objects on the server side and thereby
simplifies the implementation of such servers.
This patch enables the debugging on services that rely on dynamic
session upgrades. For example, nitpicker expects its clients to donate
RAM quota that matches the size of the virtual framebuffer, which might
change during the lifetime of a nitpicker session.
* repos/ports/include/vmm
- add support to specify cpu location during vCPU construction
* seoul
- update to latest seoul branch supporting smp
- adjust to vmm interface changes
- vCPUs will be put in a round robin fashion on the available host CPUs,
beginning with the next CPU after the default (boot) CPU
- number of vCPUs can be specified in run script
* virtualbox
- adjust to vmm interface changes
- uses still one vCPU, placed on default (boot) CPU
Fixes#1212
This reverts commit edc03489b3.
Since commit
"timer: nova specific version of the service"
a nova specific timer is used and this quirk is not necessary anymore.
Issue #1211
When a page fault cannot be resolved, the GDB monitor can get a hint about
which thread faulted by evaluating the thread state object returned by
'Cpu_session::state()'. Unfortunately, with the current implementation,
the signal which informs GDB monitor about the page fault is sent before
the thread state object of the faulted thread has been updated, so it
can happen that the faulted thread cannot be determined immediately
after receiving the signal.
With this commit, the thread state gets updated before the signal is sent.
At least on base-nova it can also happen that the thread state is not
accessible yet after receiving the page fault notification. For this
reason, GDB monitor needs to retry its query until the state is
accessible.
Fixes#1206.
The build config for core is now provided through libraries to enable
implicit config composition through specifiers and thereby avoid
consideration of inappropriate targets.
fix#1199
The count value can be used to batch timeouts. I.e., if a periodic
timeout triggered multiple times before the timer had a chance to
process them, the count corresponds to the number of passed periods.
A subject that inherits from Processor_client not necessarily has the need for
doing a processor-global TLB flush (e.g. VMs). At the other hand the Thread
class (as representation of the only source of TLB flushes) is already one of
the largest classes in base-hw because it provides all the syscall backends
and should therefore not accumulate other aspects without a functional reason.
Hence, I decided to move the aspect of synchronizing a TLB flush over all
processors to a dedicated class named Processor_domain_update.
Additionally a singleton of Processor_domain_update_list is used to enable
each processor to see all update-domain requests that are currently pending.
fix#1174
and add xml configuration option to switch it on if required. Avoids trouble
on Windows 7 guest where IRQ injected by VMMDev PCI device is not delivered.
If ioapic is required and Windows guest addition "hangs", look in file
DevPCI.cpp, function pciSetIrqInternal, variable fIsApicEnabled. If
config[0xde] == 0xbe
config[0xad] == 0xef
it works. "Deadbeaf" seems to/should be set in ACPI file vbox.dsl. Happens for
unknown reason not on Genode/Nova.
Fixes#1188
Commit 6a3368ee that refactored the mode transition assembler path, and
high-level entry point, fundamentally broke that part for the TrustZone VMs.
Instead of jumping to the appropriated address, the instruction value at that
point where used as target address.
Moreover, the TrustZone part of the mode transition page was not included into
the boundary check.
Ref #1182
On ARM it's relevant to not only distinguish between ordinary cached memory
and write-combined one, but also having non-cached memory too. To insert the
appropriated page table entries e.g.: in the base-hw kernel, we need to preserve
the information about the kind of memory from allocation until the pager
resolves a page fault. Therefore, this commit introduces a new Cache_attribute
type, and replaces the write_combined boolean with the new type where necessary.
Depending on 'src_w' and 'dst_w', different lines of a block to copy may be
32-bit aligned or not, so the alignment of each line needs to get checked.
Fixes#1111.
Don't define assembler constants inside macros, thereby calling the
corresponding macros isn't needed anymore. To prevent having to much
constants included in files where they aren't needed, split macros.s
file into a generic mode_transition.s part, and globally used macros.s.
Fix#1180
Previously this was not done before Thread_base::start(..) in
base-hw as it was not needed to have a valid cap that early. However,
when changing the affinity of a thread we need the cap to be valid
before Thread_base::start(..).
fix#1151
By now the scheduling timer was only refreshed for a new scheduling timeout
when the choosen scheduling context has changed. But we want it to be refreshed
also when the scheduled context yields without an effect to the schedulers
choice (this is the case e.g. when the idle thread gets a scheduling timeout
or a thread yields without any competitor in its priority band).
ref #1151
By using &&, we prevent the accidental copying of deallocator instances,
passed to the destroy function. We always want to take the deallocator
as reference or pointer.
For the correct integration of a QPluginWidget in a parent QWidget, with
this commit the parent QWidget's Nitpicker view is made the parent view of
the plugin's Nitpicker view.
Fixes#1173.
This commit adds a 'parent_view()' function to the loader session, which
allows to set the parent view of the subsystem's Nitpicker view.
If the function is to be used, this must get done before calling
'start()'.
Fixes#1172.
In file
src/VBox/Additions/WINNT/SharedFolders/driver/file.c
the function
static int vbsfTransferCommon(VBSFTRANSFERCTX *pCtx)
in the
VbglR0CanUsePhysPageList()
branch does not correctly evaluate the read or written bytes from
the VMM. It ever assumes that whole pages are read/written.
Workaround the bug in the Windows guest additions of Vbox until fixed
upstream by filling up the read/write buffer completely within the VMM code
of Vbox.
Fixes#1176
Genode::strncpy() enures the destination string is null terminated by
writing a null-byte. In this case, the null-bytes always overwrote the
last character of the output byte stream.
Ensures that the Exynos5 CPU is clocked equally no matter how the kernel
initialized it. This makes the result of this time critical test more
comparable.
fix#1162
Now that it is possible to resize the stack of the Genode main thread, it
is not necessary anymore to create a new Genode thread as Qt main thread.
Fixes#1134.
This patch changes both the Input::Session interface and the skeleton
for the server-side implementation of this interface
('input/component.h').
The Input::Session interface offers a new 'sigh' function, which can be
called be the client to register a signal handler. The signal handler
gets notified on the arrival of new input. This alleviates the need to
poll for input events at the client side.
The server-side skeleton for implementing input services underwent a
redesign to make it more modular and robust. I.e., there are no
global functions needed at the server side and the event-queue
enable/disable mechanism is implemented at a central place (in the root
component) rather than inside each driver.
Fixes#46
Fixes an alignment problem introduced by commit "hw: map core on demand"
where physical address alignment wasn't checked anymore, when inserting
a section within the first-level table of ARM's short translation table
format.
Many thanks to Christian Prochaska for helping to debug the problem.
In case the storage-entry point dispatches more then one packet, wait for the
previous command to finish before setting a new request. This has to be done
because the 'queuecommand' does actually *not* queue things, but can only handle
one request at the time.
Fix#1143
On ARM, when machine instructions get written into the data cache
(for example by a JIT compiler), one needs to make sure that the
instructions get written out to memory and read from memory into
the instruction cache before they get executed. This functionality
is usually provided by a kernel syscall and this patch adds a generic
interface for Genode applications to use it.
Fixes#1153.
The 'rump_cgd' server provides block level encryption for a block
session by employing the 'cgd(4)' device provided by the rumpkernel.
'rump_cgd' uses a Block_session to get access to an existing block
device and provides another Block_session to its clients. Each block
written or read by the client is transperently encrypted or decrypted
by the server.
For now 'rump_cgd' may only _configure_ a 'cgd' device but is unable
to generate a configuration. The used cipher is hardcoded to
_aes-cbc_ with a keysize of 256 bit. Furthermore the server is able to
serve one client only.
To ease the usage, its interface is modelled after the interface of
'cgdconfig(8)'. As implications thereof the key must have the same
format as used by 'cgdconfig'. That means the key is a base 64 encoded
string in which the first 4 bytes denote the actual length of the key
in bits (these 4 bytes are stored in big endian order).
Preparing a raw (e.g. without partition table) encrypted Ext2 disk
image is done by executing 'tool/rump':
! dd if=/dev/urandom of=/path/to/disk_image
! rump -c /path/to/disk_image # key is printed to stdout
! rump -c -k <key> -F ext2fs /path/to/disk_image
To use this disk image the following config snippet can be used:
! <start name="rump_cgd">
! <resource name="RAM" quantum="8M" />
! <provides><service name="Block"/></provides>
! <config action="configure">
! <params>
! <method>key</method>}
! <key>AAABAJhpB2Y2UvVjkFdlP4m44449Pi3A/uW211mkanSulJo8</key>
! </params>
! </config>
! <route>
! <service name="Block"> <child name="ahci"/> </service>
! <any-service> <parent/> <any-child/> </any-service>
! </route>
! </start>
the Block service provided by rump_cgd may be used by a file system
server in return:
! <start name="rump_fs">
! <resource name="RAM" quantum="16M"/>
! <provides><service name="File_system"/></provides>
! <config fs="ext2fs">
! <policy label="" root="/" writeable="yes"/>
! </config>
! <route>
! <service name="Block"> <child name="rump_cgd"/> </service>
! <any-service> <parent/> <any-child/> </any-service>
! </route>
! </start>
Since 'tool/rump' just utilizes the rumpkernel running on the host
system to do its duty there is a script called 'tool/cgdconf' that
extracts the key from a 'cgdconfig(8)' generated configuration file
and also is able to generade such a file from a given key. Thereby
the interoperabilty between 'rump_cgd' and the general rumpkernel
based tools is secured.
On ARM in one way or another 'string.h' prototypes will be used. Move
the definitions from rump_fs to the rump library because it is needed
by all rump based servers running on ARM.
Issue #1141.
The new 'select_from_ports' function allows a target description file to
query the path to an installed port. All ports are stored in a central
location specified as CONTRIB_DIR. By default, CONTRIB_DIR is defined
as '<genode-dir>/contrib'. Ports of 3rd-party source code are managed
using the tools at '<genode-dir>/tool/ports/'.
Issue #1082
This patch changes the top-level directory layout as a preparatory
step for improving the tools for managing 3rd-party source codes.
The rationale is described in the issue referenced below.
Issue #1082
