Until now, the /config/system ROM was not handled by the sculpt manager
but solely managed by the user. Its main purpose was the ability to
reset or power-down the machine by manually modifying the 'state'
attribute. However, down the road, we'd like to enable the sculpt
manager to drive this state, e.g., to implement the multi-staged
loading of drivers, or to drive suspend-resume states.
The support such scenarios, the 'system' state has been moved from
/config/system to /config/managed/system.
* Add EHCI PCI quirk
* Add UHCI reset to UHCI quirk
* Apply all PCI quirks in order of the PCI bus numbering
otherwise the machine might stall
Ref genodelabs/genode#4578
Instead of allowing the client to set a caching attribute
in the io_mem() call of the device interface, which was
only used to decide in between of the memory being
write-combined or not, remove it from the API.
Instead use the information delivered by the devices ROM,
whether memory from a PCI BAR is prefetchable or not,
to decide whether it is mapped write-combined or not.
Ref genodelabs/genode#4578
Memory descriptors in PCI BARs have a prefetchable bit, which can
be used to optimize memory access when setting, e.g. write-combined
in page-table entries.
Ref genodelabs/genode#4578
The DHCP client used to always send packets with a size of 1024 regardless of
the size of the actual content, which was always significantly lower. 1024
bytes was simply a guess to provide enough space for all types of DHCP client
packets. As we know the exact size of each packet the DHCP client sends even
before packet creation, this commit makes use of the knowledge resulting in
much smaller packets sent by the DHCP client.
Fixes#4619
On some Cortex A9 platforms (Qemu 4.2.1 PBXA9), the IRQ status register is not
reliable. Sometimes, it indicates an IRQ too early, i.e., shortly before the
counter wraps. Therefore we have to accomplish wrap detection via counter
comparison only. We check whether the current counter value is higher than the
start counter value of the current timeout.
However, this implies that we have to take care to always read out the counter
before it hits the max timout value again. And, therefore, the max timeout
value has to be far away from the first value the counter has after wrapping.
Consequently, we propagate a max timeout value of half the max counter value.
Fixes#4209
An installed lighttpd HTTP server can now optionally be started to serve
the boot image with the follow run options.
--load-ipxe-lighttpd run lighttpd automatically (default: off)
--load-ipxe-lighttpd-port <port> TCP port to run lighttpd on (default: 8080)
* Remove wrapper for legacy x86 platform API
* Move PCI configuration space quirks to corresponding driver
(pc_usb_host_drv, pc_wifi_drv, pc_intel_fb_drv)
* Adapt driver test run-scripts to changed configuration
Ref genodelabs/genode#4578
Consumes the information about reserved memory region reports from
the devices ROM, and adds appropriated mappings to the corresponding
device PD.
Ref genodelabs/genode#4578
We need the information about reserved memory region reports
from the ACPI tables within the platform driver to pre-fill
IOMMU tables with the corresponding mappings. Therefore,
the pci_decode component now parses the information from the
ACPI ROM, and adds "reserved_memory" nodes to all related
devices in the devices report.
Ref genodelabs/genode#4578
In case of the GPU multiplexer, we need to delegate MMIO memory
to the framebuffer client in form of a managed dataspace. To be
able to attach a given Platform::Device::Mmio object to a region map
we need to access its capability.
Ref genodelabs/genode#4578
* Modernize routines, eliminate pointers, use constructibles, etc.
* Use absolute time instead of relative time consumption when
updating the scheduler
Ref genodelabs/genode#4151
