The official way to obtain DMA addresses for RAM dataspaces is
the RPC function 'Pd_session::dma_addr' now. User-level device drivers
should not call this function directly but use the 'Platform_session'
interface of the platform driver instead.
Fixes#2243
To make room for the re-newed usb_host_drv basing on Linux 5.14 and
the re-newed lx_kit/lx_emul we have to move the depot recipe and
consistently name the old drivers with a legacy_ prefix.
Ref genodelabs/genode#4416
This patch removes the implicit build of ld-$(KERNEL) by the generic
ld.mk file because the kernel-specific dynamic linker is unreachable
when building a regular binary archive.
Issue #4320
When 'KERNEL' is specified, let the generic (pseudo) target of
lib/mk/ld.mk trigger the build of the actual dynamic linker named after
the used kernel. This way, we become able to remove the magic
linker-build step from the boot-image stage of the run tool.
Issue #4320
This patch applies the existing "privatization" of transitive
shared-library dependencies from static lib dependencies to shared lib
dependencies. It thereby improves the consistency of binaries created in
a regular build directory with binaries created in depot archives.
Issue #4408
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
* renamed rpi pic to Bcm2835_pic
* renamed rpi3 pic to Bcm2837_pic
* added bcm2837 control for setting prescaler value (to fix timer_accuracy)
* changed handling of all interrupts for rpi3 by cascading to bcm2835 pic
* rpi3 irq controller base address made consistent with rpi
* added usb controller memory region for pic on rpi3 (for SOF interrupts)
Ref #3415
When used by the 'Allocator_avl' the slab allocator's backing store is
dynamically disabled and re-enabled while adding/freeing ranges.
However, during those operations, slab entries can be freed. This,
in turn, can result in the release of a slab block (when the freed slab
entry happens to be the last entry of the block). In this corner case,
'Slab::_release_backing_store' operation has no effect because no
backing-store allocator is set. As a result, the block is no longer
referenced but not physically freed.
The patch fixes the problem by skipping '_free_curr_sb' whenever
no backing store is defined. So the completely empty block remains
in the working set.
Thanks to Peter for reporting and fixing this issue!
Fixes#4367
Fix some trivial cases where the signedness of the constant value does
not match the signedness of type the code expects to see. GCC can be
asked to warn about those by passing Wsign-covnersion flag.
Issue #4354
As far as I can tell this is not raised by any released GCC versions.
Clang 13 on the other hand warns about it due to implicit-int-conversion
warning which is automatically enabled together with Wconversion. The
problem is relatively simple, shifting access_t value does not always
produce result which is also of access_t type. For example, if access_t
is uint16_t, shifting it will produce integer result. This can be
observed even with GCC. Building the following C++ example will fail:
#include <type_traits>
#include <stdint.h>
int test() {
uint16_t a = 0xabcd;
static_assert(std::is_same_v<decltype(a<<1), uint16_t>);
return 0;
}
Changing uint16_t in the static_assert to int, will allow the code to
build.
Make such int to access_t implicit conversion explicit to allow the code
to be compiled with both GCC and clang.
Issue #4354
This patch improves the robustness of the CPU-affinity handling.
- The types in base/affinity.h received the accessors
'Location::within(space)' and 'Affinity::valid', which alleviates
the fiddling with coordinates when sanity checking the values,
in init or core.
- The 'Affinity::Location::valid' method got removed because its
meaning was too vague. For sanity checks of affinity configurations,
the new 'within' method is approriate. In cases where only the x,y
values are used for selecting a physical CPU (during thread creation),
the validity check (width*height > 0) was not meaningful anyway.
- The 'Affinity::Location::from_xml' requires a 'Affinity::Space'
as argument because a location always relates to the bounds of
a specific space. This function now implements the selection of
whole rows or columns, which has previously a feature of the
sandbox library only.
- Whenever the sandbox library (init) encounters an invalid affinity
configuration, it prints a warning message as a diagnostic aid.
- A new 'Affinity::unrestricted' function constructs an affinity that
covers the whole affinity space. The named functions clarifies
the meaning over the previous use of the default constructor.
- Core's CPU service denies session requests with an invalid
affinity parameter. Previously, it would fall back to an
unrestricted affinity.
Issue #4300
Instead of using a bitfield for storing rwx and skip boolean value,
take a boolean instead. This fixes a note giv]en by GCC 9.1 about
changes semantics of bitfields given as parameter by value on ARM.
Ref #4344
The requested guest-physical memory range may comprise multiple attached
dataspace regions, which must all be detached. This is not required for
the current vbox5 implementation, but for vbox6 as the current API
suggests these semantics.
This commit can be seen as intermediate fix as a real fix should change
the API to prevent long-running detach loops in core that may lock out
requests by other components.
* Only give managing_system permission when all parent nodes of the
corresponding component agree in doing so.
* Move the physical memory constrains heuristic from sandbox library to core
Fix#4335
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
This patch replaces the 'Ram_allocator::alloc' RPC function by a
'try_alloc' function, which reflects errors as 'Attempt' return value
instead of an exception.
Issue #4322
Issue #3612
The new 'update_list_model_from_xml' function template simplifies the
use of the list model utility by alleviating the need for implementing a
custom policy class for each model. Instead, the transformation is done
using a few lambda functions given directly as arguments.
Issue #4317
Always instantiating a network device with id `net0`, removes the need to call
append_qemu_nic_args in run scripts unless we want to add forwarding
rules.
genodelabs/genode#4311
Allow specifying additional qemu arguments for externally supported boards
(e.g. zynq_qemu) by adding a `qemu_args` file in the board-property directory.
The syntax of the qemu_args file is as follows:
- Arguments can appear in a single line or in multiple lines as the
lines will be appended (separated by a whitespace) to the global
qemu_args variable.
- If the line is prepended with a `foobar:` expression. The arguments
are only added if the foobar spec is present.
Note, that a `-m` argument specified in the qemu_args file will
override the arguments provided by the run scripts.
genodelabs/genode#4311
