Builds vector tilesets \[la]https://www.mapbox.com/developers/vector-tiles/\[ra] from large (or small) collections of GeoJSON \[la]http://geojson.org/\[ra] or Geobuf \[la]https://github.com/mapbox/geobuf\[ra] features,
\fB\fC\-e\fR\fIdirectory\fP or \fB\fC\-\-output\-to\-directory\fR=\fIdirectory\fP: Write tiles to the specified \fIdirectory\fP instead of to an mbtiles file.
\fB\fC\-l\fR\fIname\fP or \fB\fC\-\-layer=\fR\fIname\fP: Use the specified layer name instead of deriving a name from the input filename or output tileset. If there are multiple input files
specified, the files are all merged into the single named layer, even if they try to specify individual names with \fB\fC\-L\fR\&.
\fB\fC\-L\fR\fIname\fP\fB\fC:\fR\fIfile.json\fP or \fB\fC\-\-named\-layer=\fR\fIname\fP\fB\fC:\fR\fIfile.json\fP: Specify layer names for individual files. If your shell supports it, you can use a subshell redirect like \fB\fC\-L\fR\fIname\fP\fB\fC:<(cat dir/*.json)\fR to specify a layer name for the output of streamed input.
\fB\fC\-s\fR\fIprojection\fP or \fB\fC\-\-projection=\fR\fIprojection\fP: Specify the projection of the input data. Currently supported are \fB\fCEPSG:4326\fR (WGS84, the default) and \fB\fCEPSG:3857\fR (Web Mercator). In general you should use WGS84 for your input files if at all possible.
\fB\fC\-m\fR\fIdetail\fP or \fB\fC\-\-minimum\-detail=\fR\fIdetail\fP: Minimum detail that it will try if tiles are too big at regular detail (default 7)
\fB\fC\-T\fR\fIattribute\fP\fB\fC:\fR\fItype\fP or \fB\fC\-\-attribute\-type=\fR\fIattribute\fP\fB\fC:\fR\fItype\fP: Coerce the named feature \fIattribute\fP to be of the specified \fItype\fP\&.
The \fItype\fP may be \fB\fCstring\fR, \fB\fCfloat\fR, \fB\fCint\fR, or \fB\fCbool\fR\&.
If the type is \fB\fCbool\fR, then original attributes of \fB\fC0\fR (or, if numeric, \fB\fC0.0\fR, etc.), \fB\fCfalse\fR, \fB\fCnull\fR, or the empty string become \fB\fCfalse\fR, and otherwise become \fB\fCtrue\fR\&.
\fB\fC\-j\fR\fIfilter\fP or \fB\fC\-\-feature\-filter\fR=\fIfilter\fP: Check features against a per\-layer filter (as defined in the Mapbox GL Style Specification \[la]https://www.mapbox.com/mapbox-gl-js/style-spec/#types-filter\[ra]) and only include those that match. Any features in layers that have no filter specified will be passed through. Filters for the layer \fB\fC"*"\fR apply to all layers.
.IP\(bu2
\fB\fC\-J\fR\fIfilter\-file\fP or \fB\fC\-\-feature\-filter\-file\fR=\fIfilter\-file\fP: Like \fB\fC\-j\fR, but read the filter from a file.
\fB\fC\-B\fR\fIzoom\fP or \fB\fC\-\-base\-zoom=\fR\fIzoom\fP: Base zoom, the level at and above which all points are included in the tiles (default maxzoom).
If you use \fB\fC\-Bg\fR, it will guess a zoom level that will keep at most 50,000 features in the densest tile.
You can also specify a marker\-width with \fB\fC\-Bg\fR\fIwidth\fP to allow fewer features in the densest tile to
compensate for the larger marker, or \fB\fC\-Bf\fR\fInumber\fP to allow at most \fInumber\fP features in the densest tile.
\fB\fC\-as\fR or \fB\fC\-\-drop\-densest\-as\-needed\fR: If a tile is too large, try to reduce it to under 500K by increasing the minimum spacing between features. The discovered spacing applies to the entire zoom level.
\fB\fC\-ad\fR or \fB\fC\-\-drop\-fraction\-as\-needed\fR: Dynamically drop some fraction of features from each zoom level to keep large tiles under the 500K size limit. (This is like \fB\fC\-pd\fR but applies to the entire zoom level, not to each tile.)
\fB\fC\-an\fR or \fB\fC\-\-drop\-smallest\-as\-needed\fR: Dynamically drop the smallest features (physically smallest: the shortest lines or the smallest polygons) from each zoom level to keep large tiles under the 500K size limit. This option will not work for point features.
\fB\fC\-aN\fR or \fB\fC\-\-coalesce\-smallest\-as\-needed\fR: Dynamically combine the smallest features (physically smallest: the shortest lines or the smallest polygons) from each zoom level into other nearby features to keep large tiles under the 500K size limit. This option will not work for point features, and will probably not help very much with LineStrings. It is mostly intended for polygons, to maintain the full original area covered by polygons while still reducing the feature count somehow. The attributes of the small polygons are \fInot\fP preserved into the combined features, only their geometry.
\fB\fC\-pd\fR or \fB\fC\-\-force\-feature\-limit\fR: Dynamically drop some fraction of features from large tiles to keep them under the 500K size limit. It will probably look ugly at the tile boundaries. (This is like \fB\fC\-ad\fR but applies to each tile individually, not to the entire zoom level.) You probably don't want to use this.
\fB\fC\-g\fR\fIgamma\fP or \fB\fC\-\-gamma=_gamma\fR_: Rate at which especially dense dots are dropped (default 0, for no effect). A gamma of 2 reduces the number of dots less than a pixel apart to the square root of their original number.
\fB\fC\-aG\fR or \fB\fC\-\-increase\-gamma\-as\-needed\fR: If a tile is too large, try to reduce it to under 500K by increasing the \fB\fC\-g\fR gamma. The discovered gamma applies to the entire zoom level. You probably want to use \fB\fC\-\-drop\-densest\-as\-needed\fR instead.
\fB\fC\-S\fR\fIscale\fP or \fB\fC\-\-simplification=\fR\fIscale\fP: Multiply the tolerance for line and polygon simplification by \fIscale\fP\&. The standard tolerance tries to keep
the line or polygon within one tile unit of its proper location. You can probably go up to about 10 without too much visible difference.
\fB\fC\-pt\fR or \fB\fC\-\-no\-tiny\-polygon\-reduction\fR: Don't combine the area of very small polygons into small squares that represent their combined area.
\fB\fC\-ab\fR or \fB\fC\-\-detect\-shared\-borders\fR: In the manner of TopoJSON \[la]https://github.com/mbostock/topojson/wiki/Introduction\[ra], detect borders that are shared between multiple polygons and simplify them identically in each polygon. This takes more time and memory than considering each polygon individually.
.IP\(bu2
\fB\fC\-aL\fR or \fB\fC\-\-grid\-low\-zooms\fR: At all zoom levels below \fImaxzoom\fP, snap all lines and polygons to a stairstep grid instead of allowing diagonals. You will also want to specify a tile resolution, probably \fB\fC\-D8\fR\&. This option provides a way to display continuous parcel, gridded, or binned data at low zooms without overwhelming the tiles with tiny polygons, since features will either get stretched out to the grid unit or lost entirely, depending on how they happened to be aligned in the original data. You probably don't want to use this.
\fB\fC\-b\fR\fIpixels\fP or \fB\fC\-\-buffer=\fR\fIpixels\fP: Buffer size where features are duplicated from adjacent tiles. Units are "screen pixels"—1/256th of the tile width or height. (default 5)
\fB\fC\-pc\fR or \fB\fC\-\-no\-clipping\fR: Don't clip features to the size of the tile. If a feature overlaps the tile's bounds or buffer at all, it is included completely. Be careful: this can produce very large tilesets, especially with large polygons.
\fB\fC\-pD\fR or \fB\fC\-\-no\-duplication\fR: As with \fB\fC\-\-no\-clipping\fR, each feature is included intact instead of cut to tile boundaries. In addition, it is included only in a single tile per zoom level rather than potentially in multiple copies. Clients of the tileset must check adjacent tiles (possibly some distance away) to ensure they have all features.
\fB\fC\-pi\fR or \fB\fC\-\-preserve\-input\-order\fR: Preserve the original input order of features as the drawing order instead of ordering geographically. (This is implemented as a restoration of the original order at the end, so that dot\-dropping is still geographic, which means it also undoes \fB\fC\-ao\fR).
\fB\fC\-ao\fR or \fB\fC\-\-reorder\fR: Reorder features to put ones with the same properties in sequence, to try to get them to coalesce. You probably don't want to use this.
\fB\fC\-ac\fR or \fB\fC\-\-coalesce\fR: Coalesce adjacent line and polygon features that have the same properties. You probably don't want to use this.
\fB\fC\-ar\fR or \fB\fC\-\-reverse\fR: Try reversing the directions of lines to make them coalesce and compress better. You probably don't want to use this.
\fB\fC\-ag\fR or \fB\fC\-\-calculate\-feature\-density\fR: Add a new attribute, \fB\fCtippecanoe_feature_density\fR, to each feature, to record how densely features are spaced in that area of the tile. You can use this attribute in the style to produce a glowing effect where points are densely packed. It can range from 0 in the sparsest areas to 255 in the densest.
\fB\fC\-aw\fR or \fB\fC\-\-detect\-longitude\-wraparound\fR: Detect when adjacent points within a feature jump to the other side of the world, and try to fix the geometry.
\fB\fC\-M\fR\fIbytes\fP or \fB\fC\-\-maximum\-tile\-bytes=\fR\fIbytes\fP: Use the specified number of \fIbytes\fP as the maximum compressed tile size instead of 500K.
\fB\fC\-pg\fR or \fB\fC\-\-no\-tile\-stats\fR: Don't generate the \fB\fCtilestats\fR row in the tileset metadata. Uploads without tilestats \[la]https://github.com/mapbox/mapbox-geostats\[ra] will take longer to process.
Make a tileset of TIGER roads in Tippecanoe County, leaving out all but primary and secondary roads (as classified by TIGER \[la]https://www.census.gov/geo/reference/mtfcc.html\[ra]) below zoom level 11.
\fB\fC\-e\fR\fIdirectory\fP or \fB\fC\-\-output\-to\-directory=\fR\fIdirectory\fP: Write the new tiles to the specified directory instead of to an mbtiles file.
\fB\fC\-l\fR\fIlayer\fP or \fB\fC\-\-layer=\fR\fIlayer\fP: Include the named layer in the output. You can specify multiple \fB\fC\-l\fR options to keep multiple layers. If you don't specify, they will all be retained.
.IP\(bu2
\fB\fC\-L\fR\fIlayer\fP or \fB\fC\-\-exclude\-layer=\fR\fIlayer\fP: Remove the named layer from the output. You can specify multiple \fB\fC\-L\fR options to remove multiple layers.
.IP\(bu2
\fB\fC\-R\fR\fIold\fP\fB\fC:\fR\fInew\fP or \fB\fC\-\-rename\-layer=\fR\fIold\fP\fB\fC:\fR\fInew\fP: Rename the layer named \fIold\fP to be named \fInew\fP instead. You can specify multiple \fB\fC\-R\fR options to rename multiple layers. Renaming happens before filtering.
\fB\fC\-c\fR\fImatch\fP\fB\fC\&.csv\fR or \fB\fC\-\-csv=\fR\fImatch\fP\fB\fC\&.csv\fR: Use \fImatch\fP\fB\fC\&.csv\fR as the source for new attributes to join to the features. The first line of the file should be the key names; the other lines are values. The first column is the one to match against the existing features; the other columns are the new data to add.
\fB\fC\-x\fR\fIkey\fP or \fB\fC\-\-exclude=\fR\fIkey\fP: Remove attributes of type \fIkey\fP from the output. You can use this to remove the field you are matching against if you no longer need it after joining, or to remove any other attributes you don't want.
\fB\fC\-j\fR\fIfilter\fP or \fB\fC\-\-feature\-filter\fR=\fIfilter\fP: Check features against a per\-layer filter (as defined in the Mapbox GL Style Specification \[la]https://www.mapbox.com/mapbox-gl-js/style-spec/#types-filter\[ra]) and only include those that match. Any features in layers that have no filter specified will be passed through. Filters for the layer \fB\fC"*"\fR apply to all layers.
\fB\fC\-pg\fR or \fB\fC\-\-no\-tile\-stats\fR: Don't generate the \fB\fCtilestats\fR row in the tileset metadata. Uploads without tilestats \[la]https://github.com/mapbox/mapbox-geostats\[ra] will take longer to process.
\fB\fC\-s\fR\fIprojection\fP or \fB\fC\-\-projection=\fR\fIprojection\fP: Specify the projection of the output data. Currently supported are EPSG:4326 (WGS84, the default) and EPSG:3857 (Web Mercator).
\fB\fC\-l\fR\fIlayer\fP or \fB\fC\-\-layer=\fR\fIlayer\fP: Decode only layers with the specified names. (Multiple \fB\fC\-l\fR options can be specified.)
\fB\fC\-c\fR or \fB\fC\-\-tag\-layer\-and\-zoom\fR: Include each feature's layer and zoom level as part of its \fB\fCtippecanoe\fR object rather than as a FeatureCollection wrapper
