openwrt/target/linux/mediatek/dts
Maxim Anisimov 5a4eb56a7b mediatek/filogic: add Keenetic KN-3911 support
Specification:
 - MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
 - 512MB RAM
 - 128MB SPI NAND
 - 2 LEDs (green, orange)
 - 3 buttons (fn, reset, wps)
 - 2 2.5Gbit ethernet ports based on Airoha EN8811H phy

Serial Interface:
 - 3 Pins GND, RX, TX
 - Settings: 115200, 8N1

Notes:
 - The device supports dual boot mode

Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24 and tftp server.
2. Rename "openwrt-mediatek-filogic-keenetic_kn-3911-squashfs-factory.bin"
   to "KN-3911_recovery.bin" and place it in tftp server directory.
3. Connect PC with ethernet port, press the reset button, power up
   the device and keep button pressed until status led start blinking.
4. Device will download file from server, write it to flash and reboot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 22:33:21 +01:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: mt7622: add Adtran SmartRG SDG-841t6 device 2024-10-15 17:55:05 +01:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-linksys-ea7500-v3.dts mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: EAP111: add label-mac-device 2024-08-10 18:00:14 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-abt-asr3000.dts mediatek: add ABT ASR3000 support 2024-07-21 16:13:06 +02:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: fix Cudy AP3000 Outdoor label-mac 2024-11-23 20:04:01 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: filogic: prevent faulty mac address assignment 2024-05-25 12:41:26 +02:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7981b-cudy-tr3000-v1.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: Cudy WR3000 v1 wps button fix 2024-02-26 11:26:22 +01:00
mt7981b-cudy-wr3000s-v1.dts mediatek: filogic: Cudy WR3000S v1: fix CRLF line endings 2024-11-28 21:19:47 +00:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-gatonetworks-gdsp.dts mediatek: filogic: add support for GatoNetworks GDSP 2024-11-14 04:14:23 +00:00
mt7981b-glinet-gl-mt2500.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-glinet-gl-mt3000.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: filogic: convert H3C Magic NX30 Pro to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-jcg-q30-pro.dts mediatek: filogic: convert JCG Q30 PRO to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-keenetic-kn-3911.dts mediatek/filogic: add Keenetic KN-3911 support 2024-11-28 22:33:21 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: fix wps button for nokia ea0326gmp 2024-06-07 14:19:39 +02:00
mt7981b-openembed-som7981.dts mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
mt7981b-openwrt-one.dts mediatek: set mac increment to 7 for the 5G radio on OpenWrt One 2024-11-05 10:11:44 +01:00
mt7981b-qihoo-360t7.dts mediatek: filogic: convert Qihoo 360T7 to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-routerich-ax3000-common.dtsi mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-24 23:41:02 +01:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-unielec-u7981-01-nand.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: filogic: Add support for Wavlink WL-WN586X3 2024-06-09 14:58:25 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: YunCore AX835: fix voltage regulator 2024-11-03 21:40:53 +01:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts treewide: rename ZyXEL to Zyxel 2024-08-25 15:08:25 +02:00
mt7986a-acelink-ew-7886cax.dts mediatek: filogic: add Acelink EW-7886CAX support 2023-12-05 09:06:47 +01:00
mt7986a-acer-predator-w6.dts mediatek: improve device tree for Acer Predator Connect W6 2024-11-23 19:33:42 +01:00
mt7986a-acer-predator-w6d.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-23 19:33:42 +01:00
mt7986a-acer-w6-common.dtsi mediatek: improve device tree for Acer Predator Connect W6 2024-11-23 19:33:42 +01:00
mt7986a-asus-rt-ax59u.dts mediatek: filogic: asus-rt-ax59u: use NVMEM-on-UBI 2024-02-23 14:35:00 +00:00
mt7986a-asus-tuf-ax4200.dts mediatek: fix DTS defining mt7530 switch phys but not referencing them 2024-04-13 18:49:30 +01:00
mt7986a-asus-tuf-ax6000.dts mediatek: ASUS TUF-AX6000: Add Green & Red LEDs 2024-10-12 22:16:28 +02:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: filogic: bpi-r3-mini: fix power on M.2 slot 2024-02-16 13:56:01 +00:00
mt7986a-glinet-gl-mt6000.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7986a-jdcloud-re-cp-03.dts mediatek: increase phy assert time for jdcloud re-cp-03 2024-08-08 20:00:12 +02:00
mt7986a-netcore-n60.dts mediatek: filogic: convert Netcore N60 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-tplink-tl-xtr8488.dts mediatek: add support for TP-Link TL-XTR8488 2024-07-25 22:54:16 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: convert Zyxel EX5601-T0 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-zyxel-ex5700-telenor.dts filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700 2024-09-06 22:17:45 +02:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: remove deprecated led "label" properties 2024-01-06 00:46:15 +01:00
mt7986b-netgear-wax220.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986b-tplink-re6000xd.dts mediatek: filogic: add support for TP-LINK RE6000XD 2024-07-04 22:14:32 +02:00
mt7988a-arcadyan-mozart.dts mediatek: filogic: add Arcadyan Mozart platform 2024-11-01 07:43:00 +01:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-smartrg-SDG-8733A.dts mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00