mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
mediatek: Routerich AX3000: add OpenWrt U-Boot layout
This commit adds OpenWrt U-Boot layout support for Routerich AX3000. The aims: 1. Get open-source U-Boot; 2. Get maximum available free space in OpenWrt. Install ------- 1. Copy OpenWrt ubootmod-bl31-uboot.fip, ubootmod-preloader.bin, to the /tmp folder of the router using scp. 2. Make mtd partitions backups: http://192.168.1.1/cgi-bin/luci/admin/system/flash -> Save mtdblock contents 3. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 4. Write FIP and preloader: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock BL2 mtd erase BL2 mtd write /tmp/ubootmod-preloader.bin BL2 mtd unlock FIP mtd erase FIP mtd write /tmp/ubootmod-bl31-uboot.fip FIP ``` 5. Copy OpenWrt ubootmod-initramfs-recovery.itb to the tftp server root with IP 192.168.1.254. 6. Reboot router: ``` reboot ``` U-Boot will automatically download from the tftp server and boot OpenWrt initramfs system. 7. Copy OpenWrt ubootmod-squashfs-sysupgrade.itb to the /tmp dir of the router using scp. 8. Run sysupgrade: ``` sysupgrade -n /tmp/squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery -------------------- Use mtk_uartboot and UART connection if BL2 or FIP in UBI is destroyed: Link: https://github.com/981213/mtk_uartboot Return to stock: ---------------- 1. Copy partition backups (BL2.bin and FIP.bin) to the /tmp dir of the router using scp. 2. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 3. Restore stock U-Boot and reboot: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock BL2 mtd erase BL2 mtd write /tmp/BL2.bin BL2 mtd unlock FIP mtd erase FIP mtd write /tmp/FIP.bin FIP reboot ``` 4. Open U-Boot web recovery, upload stock firmware image and start upgrade. Link: http://192.168.1.1 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16791 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Mikhail Zhilkin
Hauke Mehrtens
parent
c0581520b1
commit
d413163832
@ -39,6 +39,7 @@ jcg,q30-pro|\
|
||||
netcore,n60|\
|
||||
nokia,ea0326gmp|\
|
||||
qihoo,360t7|\
|
||||
routerich,ax3000-ubootmod|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088|\
|
||||
|
||||
302
target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi
Normal file
302
target/linux/mediatek/dts/mt7981b-routerich-ax3000-common.dtsi
Normal file
@ -0,0 +1,302 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
label-mac-device = &wan;
|
||||
|
||||
led-boot = &led_power_blue;
|
||||
led-failsafe = &led_power_blue;
|
||||
led-running = &led_power_blue;
|
||||
led-upgrade = &led_power_blue;
|
||||
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-0 {
|
||||
label = "mesh";
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
label = "reset";
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <50>;
|
||||
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power_blue: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <3>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-6 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-7 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <24>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-8 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
/* LED_FUNCTION_MESH isn't implemented yet */
|
||||
function = "mesh";
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_factory_4 (-1)>;
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <0x1f>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
/* ESMT F50L1G41LB (128M) */
|
||||
spi: spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0_all {
|
||||
label = "spi0.0";
|
||||
reg = <0x0 0x8000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x4 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
wan: port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_factory_4 (-2)>;
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cell-names = "eeprom";
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "okay";
|
||||
mediatek,u3p-dis-msk = <0x1>;
|
||||
};
|
||||
@ -0,0 +1,52 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
#include "mt7981b-routerich-ax3000-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Routerich AX3000 (OpenWrt U-Boot layout)";
|
||||
compatible = "routerich,ax3000-ubootmod", "mediatek,mt7981";
|
||||
};
|
||||
|
||||
&chosen {
|
||||
rootdisk = <&ubi_fit_volume>;
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@100000 {
|
||||
label = "u-boot-env-orig";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x7a80000>;
|
||||
compatible = "linux,ubi";
|
||||
|
||||
volumes {
|
||||
ubi_fit_volume: ubi-volume-fit {
|
||||
volname = "fit";
|
||||
};
|
||||
|
||||
ubi_ubootenv: ubi-volume-ubootenv {
|
||||
volname = "ubootenv";
|
||||
};
|
||||
|
||||
ubi_ubootenv2: ubi-volume-ubootenv2 {
|
||||
volname = "ubootenv2";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ubi_ubootenv {
|
||||
nvmem-layout {
|
||||
compatible = "u-boot,env-redundant-bool";
|
||||
};
|
||||
};
|
||||
|
||||
&ubi_ubootenv2 {
|
||||
nvmem-layout {
|
||||
compatible = "u-boot,env-redundant-bool";
|
||||
};
|
||||
};
|
||||
@ -1,118 +1,27 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
#include "mt7981b-routerich-ax3000-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Routerich AX3000";
|
||||
compatible = "routerich,ax3000", "mediatek,mt7981";
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &wan;
|
||||
&spi {
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
};
|
||||
|
||||
led-boot = &led_power_blue;
|
||||
led-failsafe = &led_power_blue;
|
||||
led-running = &led_power_blue;
|
||||
led-upgrade = &led_power_blue;
|
||||
|
||||
serial0 = &uart0;
|
||||
&partitions {
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-0 {
|
||||
label = "mesh";
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
label = "reset";
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <50>;
|
||||
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power_blue: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <3>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-6 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-7 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <24>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-8 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
/* LED_FUNCTION_MESH isn't implemented yet */
|
||||
function = "mesh";
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x7000000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -75,7 +75,8 @@ openwrt,one)
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
;;
|
||||
routerich,ax3000)
|
||||
routerich,ax3000|\
|
||||
routerich,ax3000-ubootmod)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
|
||||
|
||||
@ -34,7 +34,8 @@ mediatek_setup_interfaces()
|
||||
cudy,wr3000-v1|\
|
||||
jcg,q30-pro|\
|
||||
qihoo,360t7|\
|
||||
routerich,ax3000)
|
||||
routerich,ax3000|\
|
||||
routerich,ax3000-ubootmod)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
|
||||
;;
|
||||
asus,tuf-ax4200|\
|
||||
|
||||
@ -158,6 +158,7 @@ case "$board" in
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
routerich,ax3000|\
|
||||
routerich,ax3000-ubootmod|\
|
||||
zbtlink,zbt-z8102ax|\
|
||||
zbtlink,zbt-z8103ax|\
|
||||
zyxel,ex5601-t0|\
|
||||
|
||||
@ -80,6 +80,7 @@ platform_do_upgrade() {
|
||||
openwrt,one|\
|
||||
netcore,n60|\
|
||||
qihoo,360t7|\
|
||||
routerich,ax3000-ubootmod|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088|\
|
||||
|
||||
@ -1228,6 +1228,31 @@ define Device/routerich_ax3000
|
||||
endef
|
||||
TARGET_DEVICES += routerich_ax3000
|
||||
|
||||
define Device/routerich_ax3000-ubootmod
|
||||
DEVICE_VENDOR := Routerich
|
||||
DEVICE_MODEL := AX3000 (OpenWrt U-Boot layout)
|
||||
DEVICE_DTS := mt7981b-routerich-ax3000-ubootmod
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_IN_UBI := 1
|
||||
UBOOTENV_IN_UBI := 1
|
||||
IMAGES := sysupgrade.itb
|
||||
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
||||
KERNEL := kernel-bin | gzip
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.itb := append-kernel | \
|
||||
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
||||
append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 mt7981-wo-firmware
|
||||
ARTIFACTS := preloader.bin bl31-uboot.fip
|
||||
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
||||
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot routerich_ax3000
|
||||
endef
|
||||
TARGET_DEVICES += routerich_ax3000-ubootmod
|
||||
|
||||
define Device/ruijie_rg-x60-pro
|
||||
DEVICE_VENDOR := Ruijie
|
||||
DEVICE_MODEL := RG-X60 Pro
|
||||
|
||||
Loading…
Reference in New Issue
Block a user