mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
3e6de5d77a
Use NVMEM framework to assign MAC addresses and WiFi EEPROM data on all Adtran SmartRG devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
545 lines
10 KiB
Plaintext
545 lines
10 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright (C) 2022 SmartRG Inc.
|
|
* Author: Chad Monroe <chad.monroe@smartrg.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart0;
|
|
label-mac-device = &gmac1;
|
|
led-boot = &led_status_green;
|
|
led-failsafe = &led_status_red;
|
|
led-running = &led_status_white;
|
|
led-upgrade = &led_status_blue;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs = "root=/dev/mmcblk0p5";
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/delete-node/ramoops@42ff0000;
|
|
|
|
bootdata_reserved: bootdata@45000000 {
|
|
no-map;
|
|
reg = <0x0 0x45000000 0x0 0x00001000>;
|
|
};
|
|
|
|
ramoops_reserved: ramoops@45001000 {
|
|
no-map;
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x45001000 0x0 0x00140000>;
|
|
ftrace-size = <0x20000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x20000>;
|
|
pmsg-size = <0x80000>;
|
|
};
|
|
};
|
|
|
|
bootdata {
|
|
compatible = "bootdata";
|
|
memory-region = <&bootdata_reserved>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
fan: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
#cooling-cells = <2>;
|
|
pwms = <&pwm 1 40000 0>;
|
|
|
|
/**
|
|
* set fan speed
|
|
*
|
|
* 0 = off
|
|
* 51 = 20% duty cycle (minimum supported)
|
|
* 61 = 24% duty cycle (2020 RPM)
|
|
* 77 = 30% duty cycle (3000 RPM)
|
|
* 102 = 40% duty cycle (3600 RPM)
|
|
* 255 = 100% duty cycle
|
|
*/
|
|
cooling-levels = <51 61 77 102>;
|
|
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
pulses-per-revolution = <2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&button_pins>;
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu_thermal {
|
|
cooling-maps {
|
|
cpu-active-high {
|
|
/* active: set fan to cooling level 3 */
|
|
cooling-device = <&fan 3 3>;
|
|
trip = <&cpu_trip_active_high>;
|
|
};
|
|
|
|
cpu-active-medium {
|
|
/* active: set fan to cooling level 2 */
|
|
cooling-device = <&fan 2 2>;
|
|
trip = <&cpu_trip_active_medium>;
|
|
};
|
|
|
|
cpu-active-low {
|
|
/* active: set fan to cooling level 1 */
|
|
cooling-device = <&fan 1 1>;
|
|
trip = <&cpu_trip_active_low>;
|
|
};
|
|
|
|
cpu-active-silent {
|
|
/* active: set fan to cooling level 0 */
|
|
cooling-device = <&fan 0 0>;
|
|
trip = <&cpu_trip_active_silent>;
|
|
};
|
|
};
|
|
|
|
trips {
|
|
cpu_trip_active_high: active-high {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
cpu_trip_active_medium: active-medium {
|
|
temperature = <80000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
cpu_trip_active_low: active-low {
|
|
temperature = <60000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
cpu_trip_active_silent: active-silent {
|
|
temperature = <40000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
nvmem-cells = <&macaddr 1>;
|
|
nvmem-cell-names = "mac-address";
|
|
phy-mode = "2500base-x";
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
label = "wan";
|
|
nvmem-cells = <&macaddr 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
phy-mode = "2500base-x";
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <1500000>;
|
|
reset-post-delay-us = <1000000>;
|
|
|
|
phy5: ethernet-phy@5 {
|
|
/* GPY211 */
|
|
compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
mxl,led-drive-vdd;
|
|
mxl,led-config = <0x30 0x40 0x80 0x0>;
|
|
};
|
|
|
|
phy6: ethernet-phy@6 {
|
|
/* GPY211 */
|
|
compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
mxl,led-drive-vdd;
|
|
mxl,led-config = <0x30 0x40 0x80 0x0>;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
hs400-ds-delay = <0x14014>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
status = "okay";
|
|
|
|
card@0 {
|
|
compatible = "mmc-card";
|
|
reg = <0>;
|
|
|
|
block {
|
|
compatible = "block-device";
|
|
|
|
partitions {
|
|
block-partition-factory {
|
|
partname = "factory";
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
eeprom_factory_a0000: eeprom@a0000 {
|
|
reg = <0xa0000 0x1000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
block-partition-mfginfo {
|
|
partname = "mfginfo";
|
|
|
|
nvmem-layout {
|
|
compatible = "adtran,mfginfo";
|
|
|
|
macaddr: mfg-mac {
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pins>;
|
|
status = "disabled";
|
|
|
|
slot0: pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
radio0: mt7915@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
nvmem-cells = <&eeprom_factory_a0000>, <&macaddr 4>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "okay";
|
|
|
|
band@0 {
|
|
/* 2.4 GHz */
|
|
reg = <0>;
|
|
nvmem-cells = <&macaddr 2>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
band@1 {
|
|
/* lower 5 GHz */
|
|
reg = <1>;
|
|
nvmem-cells = <&macaddr 3>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
mmc0_pins_default: mmc0-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0-uhs-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
|
|
pcie_pins: pcie-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie_clk", "pcie_pereset";
|
|
};
|
|
};
|
|
|
|
button_pins: button-pins {
|
|
pins = "GPIO_12";
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart1_2_rx_tx", "uart1_2_cts_rts";
|
|
};
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c";
|
|
};
|
|
};
|
|
|
|
pwm_pins: pwm-pins {
|
|
mux {
|
|
function = "pwm";
|
|
groups = "pwm0", "pwm1_0";
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf-2g-5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
mux_sel: mux-sel-hog {
|
|
gpio-hog;
|
|
gpios = <23 GPIO_ACTIVE_LOW>;
|
|
line-name = "mux-sel";
|
|
output-high;
|
|
};
|
|
|
|
mux_oe: mux-oe-hog {
|
|
gpio-hog;
|
|
gpios = <24 GPIO_ACTIVE_LOW>;
|
|
line-name = "mux-oe";
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
|
|
/* DA14531MOD Bluetooth */
|
|
bluetooth {
|
|
compatible = "renesas,DA14531";
|
|
reset-gpios = <&pio 27 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
system-leds {
|
|
compatible = "srg,sysled";
|
|
reg = <0x30>;
|
|
|
|
led_status_red: led@1 {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_STATUS;
|
|
reg = <1>;
|
|
};
|
|
|
|
led_status_green: led@2 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
reg = <2>;
|
|
};
|
|
|
|
led_status_blue: led@3 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
reg = <3>;
|
|
};
|
|
|
|
led_status_white: led@4 {
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
reg = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "okay";
|
|
};
|