.. |
ar724x_senao_loader-4k.dtsi
|
ath79: add Senao 'failsafe' sysupgrade procedure
|
2021-04-08 09:20:59 +02:00 |
ar724x_senao_loader-64k.dtsi
|
ath79: add Senao 'failsafe' sysupgrade procedure
|
2021-04-08 09:20:59 +02:00 |
ar724x_ubnt_xm_outdoor.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar724x_ubnt_xm.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar724x.dtsi
|
ath79: resolve GPIO address conflicts
|
2021-07-01 23:26:49 +02:00 |
ar934x_senao_loader.dtsi
|
ath79: add Senao 'failsafe' sysupgrade procedure
|
2021-04-08 09:20:59 +02:00 |
ar934x.dtsi
|
ath79: resolve GPIO address conflicts
|
2021-07-01 23:26:49 +02:00 |
ar1022_iodata_wn-ag300dgr.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar1022_sitecom_wlr-7100.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7100_mikrotik_routerboard-4xx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7100.dtsi
|
ath79: resolve GPIO address conflicts
|
2021-07-01 23:26:49 +02:00 |
ar7161_adtran_bsap1800-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_adtran_bsap1840.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_adtran_bsap1880.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_aruba_ap-105.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_buffalo_wzr-600dhp.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_buffalo_wzr-hp-ag300h.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_buffalo_wzr-hp-ag300h.dtsi
|
ath79: drop cs-gpios property
|
2021-05-01 13:17:57 +02:00 |
ar7161_dlink_dir-825-b1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_jjplus_ja76pf2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_meraki_mr16.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_mikrotik_routerboard-493g.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_netgear_wndr3700-v2.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_netgear_wndr3700.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_netgear_wndr3800.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_netgear_wndr3800ch.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_netgear_wndr.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7161_netgear_wndrmac-v1.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_netgear_wndrmac-v2.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7161_siemens_ws-ap3610.dts
|
ath79: increase WS-AP3610 SPI frequency
|
2021-07-07 17:13:16 +02:00 |
ar7161_ubnt_routerstation-pro.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_ubnt_routerstation.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7161_ubnt_routerstation.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_buffalo_whr-g301n.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_dlink_dir-615-e4.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_engenius_enh202-v1.dts
|
ath79: adjust ath79/tiny Senao APs to 4k blocksize
|
2021-04-08 09:20:59 +02:00 |
ar7240_netgear_wnr612-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_netgear_wnr612-v2.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_netgear_wnr1000-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_on_n150r.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa701nd-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa730re-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa801nd-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa830re-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa901nd-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wa.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7240_tplink_tl-wr740n-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr740n-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr741-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr743nd-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr841-v5.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr941-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240_tplink_tl-wr.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7240_tplink.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7240_ubnt_bullet-m-ar7240.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7240.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
2020-08-17 15:19:03 +02:00 |
ar7241_netgear_wnr2000-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7241_netgear_wnr2200-8m.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7241_netgear_wnr2200-16m.dts
|
kernel: mtdsplit_uimage: replace "netgear, uimage" parser
|
2021-01-22 21:03:11 +01:00 |
ar7241_netgear_wnr2200.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7241_tplink_tl-mr3x20.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7241_tplink_tl-mr3220-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7241_tplink_tl-mr3420-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7241_tplink_tl-wr841-v7.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7241_tplink_tl-wr842n-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7241_tplink.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7241_ubnt_airrouter.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7241_ubnt_bullet-m-ar7241.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_nanobridge-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_nanostation-loco-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_nanostation-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_picostation-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_powerbridge-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_rocket-m.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7241_ubnt_unifi-ap-outdoor-plus.dts
|
ath79: add support for Ubiquiti UniFi AP Outdoor+
|
2021-02-01 00:47:46 +01:00 |
ar7241_ubnt_unifi.dts
|
ath79: add support for Ubiquiti UniFi AP Outdoor+
|
2021-02-01 00:47:46 +01:00 |
ar7241_ubnt_unifi.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7241.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
2020-08-17 15:19:03 +02:00 |
ar7242_avm_fritz300e.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7242_buffalo_bhr-4grv.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7242_buffalo_wzr-bhr.dtsi
|
ath79: drop cs-gpios property
|
2021-05-01 13:17:57 +02:00 |
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
|
ath79: drop cs-gpios property
|
2021-05-01 13:17:57 +02:00 |
ar7242_buffalo_wzr-hp-g450h.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar7242_engenius_eap350-v1.dts
|
ath79: adjust ath79/tiny Senao APs to 4k blocksize
|
2021-04-08 09:20:59 +02:00 |
ar7242_engenius_ecb350-v1.dts
|
ath79: adjust ath79/tiny Senao APs to 4k blocksize
|
2021-04-08 09:20:59 +02:00 |
ar7242_meraki_mr12.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7242_tplink_tl-wr2543-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7242_ubnt_edgeswitch-5xp.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7242_ubnt_edgeswitch-8xp.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar7242_ubnt_sw.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar7242.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
2019-06-05 10:12:31 +02:00 |
ar9132_buffalo_wzr-hp-g300nh-rb.dts
|
ath79: Add support for Buffalo WZR-HP-G300NH
|
2021-03-22 09:23:10 +01:00 |
ar9132_buffalo_wzr-hp-g300nh-s.dts
|
ath79: Add support for Buffalo WZR-HP-G300NH
|
2021-03-22 09:23:10 +01:00 |
ar9132_buffalo_wzr-hp-g300nh.dtsi
|
ath79: Add support for Buffalo WZR-HP-G300NH
|
2021-03-22 09:23:10 +01:00 |
ar9132_tplink_tl-wa901nd-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9132_tplink_tl-wr941-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9132_tplink_tl-wr1043nd-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9132.dtsi
|
ath79: resolve GPIO address conflicts
|
2021-07-01 23:26:49 +02:00 |
ar9330_dlink_dir-505.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9330_glinet_gl-ar150.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9330_openmesh_om2p-lc.dts
|
ath79: Add support for OpenMesh OM2P-LC
|
2020-12-30 23:32:07 +01:00 |
ar9330_openmesh_om2p-v2.dts
|
ath79: Add support for OpenMesh OM2P v2
|
2020-12-30 23:32:07 +01:00 |
ar9330_openmesh_om2p.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9330_pqi_air-pen.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9330_ziking_cpe46b.dts
|
ath79: add support for ZiKing CPE46B
|
2021-05-17 01:01:32 +02:00 |
ar9330.dtsi
|
ath79: resolve GPIO address conflicts
|
2021-07-01 23:26:49 +02:00 |
ar9331_8dev_carambola2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_alfa-network_ap121f.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9331_alfa-network_ap121f.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_alfa-network_ap121fe.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9331_arduino_yun.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_embeddedwireless_dorin.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_etactica_eg200.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_glinet_64xx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_glinet_6408.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9331_glinet_6416.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9331_glinet_gl-mifi.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_glinet_gl-usb150.dts
|
ath79: enable UART node for GL-USB150
|
2021-02-25 15:12:05 +01:00 |
ar9331_hak5_lan-turtle.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9331_hak5_lan-turtle.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_hak5_packet-squirrel.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9331_hak5_wifi-pineapple-nano.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_pisen_ts-d084.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_pisen_wmm003n.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_teltonika_rut230-v1.dts
|
ath79: add support for Teltonika RUT230 v1
|
2021-06-30 21:39:59 +02:00 |
ar9331_tplink_tl-mr10u.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-mr3020-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_tplink_tl-mr3040-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_tplink_tl-wr703n.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr710n-8m.dtsi
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9331_tplink_tl-wr710n-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr710n-v2.1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr710n.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331_tplink_tl-wr740n-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr740n-v5.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr741nd-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9331_tplink_tl-wr741nd-v4.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9331.dtsi
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9341_engenius_eap300-v2.dts
|
ath79: create common DTSI for Senao ar934x APs
|
2021-02-24 02:53:53 +01:00 |
ar9341_engenius_ens202ext-v1.dts
|
ath79: create common DTSI for Senao ar934x APs
|
2021-02-24 02:53:53 +01:00 |
ar9341_openmesh_om2p-hs-v1.dts
|
ath79: add support for OpenMesh OM2P-HS v1
|
2020-12-29 00:03:26 +01:00 |
ar9341_openmesh_om2p-hs-v2.dts
|
ath79: add support for OpenMesh OM2P-HS v2
|
2020-12-29 00:03:26 +01:00 |
ar9341_openmesh_om2p-hs-v3.dts
|
ath79: add support for OpenMesh OM2P-HS v3
|
2020-12-29 00:03:26 +01:00 |
ar9341_openmesh_om2p-hs.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9341_pcs_cr3000.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9341_pisen_wmb001n.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9341_tplink_tl-mr3420-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9341_tplink_tl-wa850re-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9341_tplink_tl-wa860re-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9341_tplink_tl-wa901nd-v3.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9341_tplink_tl-wa.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9341_tplink_tl-wr841-v8.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9341_tplink_tl-wr842n-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
ar9341_tplink.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9341.dtsi
|
ath79: do not set inherited phy-mode/status properties again
|
2020-01-31 13:42:12 +01:00 |
ar9342_iodata_etg3-r.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9342_mikrotik_routerboard-912uag-2hpnd.dts
|
ath79: mikrotik: fix beeper phantom noise on RB912
|
2021-07-01 11:58:36 +02:00 |
ar9342_ubnt_aircube-ac.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9342_ubnt_bullet-ac.dts
|
ath79: Add support for Ubiquiti Bullet AC
|
2021-01-15 18:32:38 +01:00 |
ar9342_ubnt_bullet-m-xw.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9342_ubnt_lap-120.dts
|
ath79: create DTSI files for ubnt WA 1-/2-port devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_litebeam-ac-gen2.dts
|
ath79: remove redundant setup of wmac for ubnt WA devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_nanobeam-ac-gen2.dts
|
ath79: Add support for Ubiquiti NanoBeam AC Gen2
|
2020-11-18 21:13:46 +01:00 |
ar9342_ubnt_nanobeam-ac.dts
|
ath79: Add support for Ubiquiti NanoBeam AC Gen2
|
2020-11-18 21:13:46 +01:00 |
ar9342_ubnt_nanostation-ac-loco.dts
|
ath79: remove redundant setup of wmac for ubnt WA devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_nanostation-ac.dts
|
ath79: remove redundant setup of wmac for ubnt WA devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_nanostation-loco-m-xw.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9342_ubnt_nanostation-m-xw.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9342_ubnt_powerbeam-5ac-gen2.dts
|
ath79: create DTSI files for ubnt WA 1-/2-port devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_powerbeam-m-xw.dts
|
ath79: add support for Ubiquiti PowerBeam M (XW)
|
2021-07-04 14:42:08 +02:00 |
ar9342_ubnt_wa_1port.dtsi
|
ath79: create DTSI files for ubnt WA 1-/2-port devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_wa_2port.dtsi
|
ath79: create DTSI files for ubnt WA 1-/2-port devices
|
2020-11-03 18:34:10 +01:00 |
ar9342_ubnt_wa.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9342_ubnt_xw.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_aerohive_hiveap-121.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_alfa-network_n5q.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_comfast_cf-e120a-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_compex_wpj344-16m.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_devolo_dlan_wifi.dtsi
|
ath79: add support for Devolo dLAN pro 1200+ WiFi ac
|
2021-06-06 18:56:45 +02:00 |
ar9344_devolo_dlan-pro-1200plus-ac.dts
|
ath79: add support for Devolo dLAN pro 1200+ WiFi ac
|
2021-06-06 18:56:45 +02:00 |
ar9344_devolo_magic-2-wifi.dts
|
ath79: add support for Devolo dLAN pro 1200+ WiFi ac
|
2021-06-06 18:56:45 +02:00 |
ar9344_dlink_dir-8x5.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_dlink_dir-825-c1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_dlink_dir-835-a1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_engenius_eap600.dts
|
ath79: add support for Senao Engenius EAP600
|
2020-12-25 10:38:13 +01:00 |
ar9344_engenius_ecb600.dts
|
ath79: Create common DTSI for EAP600 and ECB600
|
2020-12-25 10:38:13 +01:00 |
ar9344_engenius_exx600.dtsi
|
ath79: create common DTSI for Senao ar934x APs
|
2021-02-24 02:53:53 +01:00 |
ar9344_enterasys_ws-ap3705i.dts
|
ath79: drop cs-gpios property
|
2021-05-01 13:17:57 +02:00 |
ar9344_mercury_mw4530r-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_mikrotik_routerboard-sxt-5n.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_mikrotik_routerboard-sxt-5nd-r2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_netgear_wndr3700-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_netgear_wndr4300.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_netgear_wndr4300sw.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_netgear_wndr4300tn.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_netgear_wndr_usb.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_netgear_wndr_wan.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_netgear_wndr.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_ocedo_raccoon.dts
|
ath79: increase SPI frequency for OCEDO boards
|
2021-07-07 17:13:23 +02:00 |
ar9344_openmesh_mr600-v1.dts
|
ath79: Add support for OpenMesh MR600 v1
|
2021-01-19 15:39:36 +01:00 |
ar9344_openmesh_mr600-v2.dts
|
ath79: Add support for OpenMesh MR600 v2
|
2021-01-19 15:39:36 +01:00 |
ar9344_openmesh_mr600.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_openmesh_om5p.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_pcs_cap324.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_pcs_cr5000.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_qihoo_c301.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_qxwlan_e750a-v4-8m.dts
|
ath79: add support for Qxwlan E750A v4
|
2020-10-15 18:52:39 +02:00 |
ar9344_qxwlan_e750a-v4-16m.dts
|
ath79: add support for Qxwlan E750A v4
|
2020-10-15 18:52:39 +02:00 |
ar9344_qxwlan_e750g-v8-8m.dts
|
ath79: add support for Qxwlan E750G v8
|
2020-10-17 20:17:59 +02:00 |
ar9344_qxwlan_e750g-v8-16m.dts
|
ath79: add support for Qxwlan E750G v8
|
2020-10-17 20:17:59 +02:00 |
ar9344_qxwlan_e750x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_samsung_wam250.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_teltonika_rut9xx.dtsi
|
ath79: fix RS-485 on Teltonika RUT-955
|
2021-03-17 17:41:24 +00:00 |
ar9344_teltonika_rut955-h7v3c0.dts
|
ath79: fix RS-485 on Teltonika RUT-955
|
2021-03-17 17:41:24 +00:00 |
ar9344_teltonika_rut955.dts
|
ath79: fix RS-485 on Teltonika RUT-955
|
2021-03-17 17:41:24 +00:00 |
ar9344_tplink_cpe210-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_cpe220-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_cpe510-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_cpe510-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_cpe510-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_cpe610-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_tplink_cpe610-v2.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_tplink_cpe_1port.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_tplink_cpe_2port.dtsi
|
ath79: enable LNA for all ar9344 TPLink CPE devices
|
2020-12-02 16:28:19 +01:00 |
ar9344_tplink_cpe.dtsi
|
ath79: use dynamic partitioning for TP-Link CPE series
|
2021-06-05 23:39:14 +02:00 |
ar9344_tplink_tl-wdr3500-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_tplink_tl-wdr3600-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_tl-wdr4300-v1-il.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_tl-wdr4300-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_tl-wdr4300.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
ar9344_tplink_tl-wdr4310-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_tl-wdrxxxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_tplink_wbs210-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_wbs210-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_wbs510-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_tplink_wbs510-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
ar9344_ubnt_unifi-ap-pro.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_wd_mynet-n750.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_wd_mynet-wifi-rangeextender.dts
|
ath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender
|
2021-06-07 00:25:11 +02:00 |
ar9344_winchannel_wb2000.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344_zbtlink_zbt-wd323.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
ar9344.dtsi
|
ath79: specify device-type for PCI controllers
|
2021-02-20 01:26:14 +01:00 |
ath79.dtsi
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca953x_dlink_dap-2xxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca953x_tplink_tl-wr810n.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca953x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca955x_dlink_dap-2xxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca955x_engenius_ecb1xxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca955x_senao_loader.dtsi
|
ath79: move pcie node to DTSI for qca955x Senao APs
|
2021-04-08 09:20:59 +02:00 |
qca955x_ubnt_xc.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca955x_zyxel_nbg6x16.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca955x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca956x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_8dev_lima.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_alfa-network_n2q.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9531_alfa-network_pi-wifi4.dts
|
ath79: add support for ALFA Network Pi-WiFi4
|
2020-11-18 23:49:34 +01:00 |
qca9531_alfa-network_r36a.dts
|
ath79: calculate Eth MACs from WLAN on ALFA Network R36A
|
2020-11-18 23:49:34 +01:00 |
qca9531_alfa-network_r36a.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-e5.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-e130n-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-e313ac.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-e314n-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-e560ac.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-ew72.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_comfast_cf-wr752ac-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_compex_wpj531-16m.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_dlink_dch-g020-a1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_engenius_ews511ap.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_glinet_gl-ar300m16.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9531_glinet_gl-ar300m-lite.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9531_glinet_gl-ar300m-nand.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9531_glinet_gl-ar300m-nor.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9531_glinet_gl-ar300m.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_glinet_gl-ar750.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_glinet_gl-e750.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_glinet_gl-x750.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_qxwlan_e600g-v2-8m.dts
|
ath79: add support for Qxwlan E600G v2 / E600GAC v2
|
2020-11-12 17:18:26 +01:00 |
qca9531_qxwlan_e600g-v2-16m.dts
|
ath79: add support for Qxwlan E600G v2 / E600GAC v2
|
2020-11-12 17:18:26 +01:00 |
qca9531_qxwlan_e600g.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_qxwlan_e600gac-v2-8m.dts
|
ath79: add support for Qxwlan E600G v2 / E600GAC v2
|
2020-11-12 17:18:26 +01:00 |
qca9531_qxwlan_e600gac-v2-16m.dts
|
ath79: add support for Qxwlan E600G v2 / E600GAC v2
|
2020-11-12 17:18:26 +01:00 |
qca9531_telco_t1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_tplink_archer-d50-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_tplink_tl-mr3420-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_tplink_tl-mr6400-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_tplink_tl-wr810n-v1.dts
|
ath79: fix USB power on TP-Link TL-WR810N v1
|
2021-02-26 13:57:02 +01:00 |
qca9531_tplink_tl-wr902ac-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_wallys_dr531.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9531_yuncore_a770.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_comfast_cf-e110n-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_dlink_dap-13xx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_dlink_dap-1330-a1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_dlink_dap-1365-a1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_dlink_dap-2230-a1.dts
|
ath79: keep DTSI files for D-Link SoC-specific
|
2021-01-04 01:09:32 +01:00 |
qca9533_dlink_dap-3320-a1.dts
|
ath79: keep DTSI files for D-Link SoC-specific
|
2021-01-04 01:09:32 +01:00 |
qca9533_mikrotik_routerboard-16m.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_mikrotik_routerboard-lhg-2nd.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_mikrotik_routerboard-lhg-hb.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_mikrotik_routerboard-wapr-2nd.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_openmesh_om2p-hs-v4.dts
|
ath79: Add support for OpenMesh OM2P-HS v4
|
2020-12-28 19:37:24 +01:00 |
qca9533_openmesh_om2p-v4.dts
|
ath79: Add support for OpenMesh OM2P v4
|
2020-12-28 19:37:24 +01:00 |
qca9533_openmesh_om2p-v4.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_plasmacloud_pa300.dts
|
ath79: Add support for Plasma Cloud PA300
|
2020-12-22 19:11:50 +01:00 |
qca9533_plasmacloud_pa300.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_plasmacloud_pa300e.dts
|
ath79: Add support for Plasma Cloud PA300E
|
2020-12-22 19:11:50 +01:00 |
qca9533_qca_ap143-8m.dts
|
ath79: add support for Qualcomm AP143 reference boards
|
2021-06-05 01:17:11 +02:00 |
qca9533_qca_ap143-16m.dts
|
ath79: add support for Qualcomm AP143 reference boards
|
2021-06-05 01:17:11 +02:00 |
qca9533_qca_ap143.dtsi
|
ath79: add support for Qualcomm AP143 reference boards
|
2021-06-05 01:17:11 +02:00 |
qca9533_tplink_cpe210-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_cpe210-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_cpe210.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9533_tplink_cpe220-v3.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9533_tplink_cpexxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_tplink_tl-wa801nd-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wa801nd-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wa801nd.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_tplink_tl-wa850re-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_tplink_tl-wr802n-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr802n-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr802n.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_tplink_tl-wr810n-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr841-v9.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr841-v10.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr841-v11.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr841-v11.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9533_tplink_tl-wr841-v12.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9533_tplink_tl-wr841.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_tplink_tl-wr841hp-v3.dts
|
ath79: add support for TP-Link TL-WR841HP v3
|
2021-06-13 23:30:05 +02:00 |
qca9533_tplink_tl-wr842n-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9533_ubnt_aircube-isp.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9550_airtight_c-75.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9556_avm_fritz450e.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9556_avm_fritz1750e.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9556_avm_fritz-repeater.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9556_avm_fritzdvbc.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9557_8dev_rambutan.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9557_buffalo_bhr-4grv2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9557_dlink_dap-2660-a1.dts
|
ath79: keep DTSI files for D-Link SoC-specific
|
2021-01-04 01:09:32 +01:00 |
qca9557_engenius_eap1200h.dts
|
ath79: move pcie node to DTSI for qca955x Senao APs
|
2021-04-08 09:20:59 +02:00 |
qca9557_engenius_ecb1200.dts
|
ath79: create common DTSI for ECB1200 and ECB1750
|
2020-12-22 19:11:50 +01:00 |
qca9557_engenius_enstationac-v1.dts
|
ath79: move pcie node to DTSI for qca955x Senao APs
|
2021-04-08 09:20:59 +02:00 |
qca9557_iodata_wn-ac1167dgr.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9557_iodata_wn-ac1600dgr2.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9557_iodata_wn-ac1600dgr.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9557_iodata_wn-ac-dgr.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9557_zyxel_nbg6616.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9558_allnet_all-wap02860ac.dts
|
ath79: move pcie node to DTSI for qca955x Senao APs
|
2021-04-08 09:20:59 +02:00 |
qca9558_belkin_f9j1108-v2.dts
|
ath79: create shared DTSI/definition for Belkin F9J1108/F9K1115 v2
|
2020-12-14 16:57:21 +01:00 |
qca9558_belkin_f9k1115-v2.dts
|
ath79: add support for the Belkin F9K1115 v2 (AC1750 DB Wi-Fi)
|
2020-12-14 16:59:49 +01:00 |
qca9558_belkin_f9x-v2.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_comfast_cf-wr650ac-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9558_comfast_cf-wr650ac-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9558_comfast_cf-wr650ac.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_devolo_dvl1xxx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_devolo_dvl1200e.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_devolo_dvl1200i.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_devolo_dvl1750c.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_devolo_dvl1750e.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_devolo_dvl1750i.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_devolo_dvl1750x.dts
|
ath79: move device specific nodes to DTS files for Devolo 1xxx
|
2020-11-24 14:40:55 +01:00 |
qca9558_dlink_dap-2680-a1.dts
|
ath79: keep DTSI files for D-Link SoC-specific
|
2021-01-04 01:09:32 +01:00 |
qca9558_dlink_dap-2695-a1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_dlink_dap-3662-a1.dts
|
ath79: add support for D-Link DAP-3662 A1
|
2021-02-09 13:10:33 +01:00 |
qca9558_domywifi_dw33d.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_engenius_ecb1750.dts
|
ath79: create common DTSI for ECB1200 and ECB1750
|
2020-12-22 19:11:50 +01:00 |
qca9558_engenius_epg5000.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_librerouter_librerouter-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_mikrotik_routerboard-92x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9558_mikrotik_routerboard-922uags-5hpacd.dts
|
ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD
|
2021-04-16 13:54:22 +02:00 |
qca9558_netgear_ex6400.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_netgear_ex7300.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_netgear_ex7300.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_ocedo_koala.dts
|
ath79: increase SPI frequency for OCEDO boards
|
2021-07-07 17:13:23 +02:00 |
qca9558_ocedo_ursus.dts
|
ath79: increase SPI frequency for OCEDO boards
|
2021-07-07 17:13:23 +02:00 |
qca9558_openmesh_a40.dts
|
ath79: Add support for OpenMesh A40
|
2021-06-05 01:17:11 +02:00 |
qca9558_openmesh_a60.dts
|
ath79: Add support for OpenMesh A60
|
2021-06-05 01:17:11 +02:00 |
qca9558_openmesh_a60.dtsi
|
ath79: Add support for OpenMesh A60
|
2021-06-05 01:17:11 +02:00 |
qca9558_openmesh_mr900-v1.dts
|
ath79: make OpenMesh MR900 DTSI more general
|
2021-01-19 21:41:25 +01:00 |
qca9558_openmesh_mr900-v2.dts
|
ath79: make OpenMesh MR900 DTSI more general
|
2021-01-19 21:41:25 +01:00 |
qca9558_openmesh_mr1750-v1.dts
|
ath79: Add support for OpenMesh MR1750 v1
|
2021-01-19 21:41:26 +01:00 |
qca9558_openmesh_mr1750-v2.dts
|
ath79: Add support for OpenMesh MR1750 v2
|
2021-01-19 21:41:26 +01:00 |
qca9558_openmesh_mr.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_openmesh_om5p-ac-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_qxwlan_e558-v2-8m.dts
|
ath79: add support for Qxwlan E558 v2
|
2020-10-17 20:17:59 +02:00 |
qca9558_qxwlan_e558-v2-16m.dts
|
ath79: add support for Qxwlan E558 v2
|
2020-10-17 20:17:59 +02:00 |
qca9558_qxwlan_e558.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_sitecom_wlr-8100.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_archer-c5-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9558_tplink_archer-c7-v1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9558_tplink_archer-c7-v2.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9558_tplink_archer-c.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_archer-d7-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9558_tplink_archer-d7.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_archer-d7b-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9558_tplink_re350k-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_re355-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_tplink_re450-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_tplink_rex5x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_tl-wdr4900-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_tl-wdr7500-v3.dts
|
ath79: add support for TP-Link TL-WDR7500 v3
|
2020-12-04 18:21:08 +01:00 |
qca9558_tplink_tl-wr941n-v7-cn.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_tl-wr1043nd-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_tplink_tl-wr1043nd-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_tplink_tl-wr1043nd.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_tplink_tl-wr1045nd-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_trendnet_tew-823dru.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9558_ubnt_powerbeam-5ac-500.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9558_ubnt_rocket-5ac-lite.dts
|
ath79: Support for Ubiquiti Rocket 5AC Lite
|
2021-06-07 00:23:51 +02:00 |
qca9558_zyxel_nbg6716.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_avm_fritz4020.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9561_nec_wf1200cr.dts
|
ath79: add support for NEC Aterm WF1200CR
|
2021-06-06 21:21:51 +02:00 |
qca9561_tplink_archer-c5x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9561_tplink_archer-c6x.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9561_tplink_archer-c25-v1.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9561_tplink_archer-c58-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_archer-c59-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_archer-c59-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_archer-c60-v1.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_archer-c60-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_archer-c60-v3.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9561_tplink_eap225-wall-v2.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9561_xiaomi_mi-router-4q.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_comfast_cf-e375ac.dts
|
ath79: add support for COMFAST CF-E375AC
|
2021-05-17 01:01:32 +02:00 |
qca9563_compex_wpj563.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_dlink_dir-842-c1.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_dlink_dir-842-c2.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_dlink_dir-842-c3.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_dlink_dir-842-c.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_dlink_dir-859-a1.dts
|
ath79: increase max SPI clock for DIR-859 A1
|
2021-04-10 20:57:37 +02:00 |
qca9563_elecom_wrc-300ghbk2-i.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_elecom_wrc-1750ghbk2-i.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_elecom_wrc-ghbk2-i.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_glinet_gl-ar750s-nor-nand.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_glinet_gl-ar750s-nor.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_glinet_gl-ar750s.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_nec_wg800hp.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_nec_wg1200cr.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_netgear_wndr4300-v2.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_netgear_wndr4500-v3.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_netgear_wndr.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_phicomm_k2t.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_qxwlan_e1700ac-v2-8m.dts
|
ath79: add support for Qxwlan E1700AC v2
|
2020-10-17 20:18:00 +02:00 |
qca9563_qxwlan_e1700ac-v2-16m.dts
|
ath79: add support for Qxwlan E1700AC v2
|
2020-10-17 20:18:00 +02:00 |
qca9563_qxwlan_e1700ac.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_rosinson_wr818.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_archer-a7-v5.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_tplink_archer-c2-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_archer-c6-v2-us.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9563_tplink_archer-c6-v2.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9563_tplink_archer-c7-v4.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_archer-c7-v5.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_tplink_archer-x6-v2.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_archer-x7-v5.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_eap2x5-1port.dtsi
|
ath79: fix 10 Mbit PLL data for TP-Link EAP2xx
|
2021-04-15 22:40:55 +02:00 |
qca9563_tplink_eap225-outdoor-v1.dts
|
ath79: support for TP-Link EAP225-Outdoor v1
|
2020-11-23 22:53:15 +01:00 |
qca9563_tplink_eap225-v3.dts
|
ath79: support for TP-Link EAP225 v3
|
2020-11-23 22:53:15 +01:00 |
qca9563_tplink_eap245-v1.dts
|
ath79: support for TP-Link EAP245 v1
|
2020-11-23 22:53:15 +01:00 |
qca9563_tplink_eap245-v3.dts
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_re450-v2.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_tplink_re450-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_tplink_re450.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_re455-v1.dts
|
ath79: add support for TP-Link RE455 v1
|
2021-07-11 16:58:12 +02:00 |
qca9563_tplink_tl-wpa8630-v1.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_tplink_tl-wpa8630.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_tl-wpa8630p-v2-int.dts
|
ath79: add support for TP-Link TL-WPA8630P (EU) v2.1
|
2020-10-04 15:44:05 +02:00 |
qca9563_tplink_tl-wpa8630p-v2.0-eu.dts
|
ath79: rename TP-Link TL-WPA8630P v2 (EU) to v2.0 (EU)
|
2020-10-04 15:44:05 +02:00 |
qca9563_tplink_tl-wpa8630p-v2.1-eu.dts
|
ath79: add support for TP-Link TL-WPA8630P (EU) v2.1
|
2020-10-04 15:44:05 +02:00 |
qca9563_tplink_tl-wpa8630p-v2.dtsi
|
ath79: add support for TP-Link TL-WPA8630P (EU) v2.1
|
2020-10-04 15:44:05 +02:00 |
qca9563_tplink_tl-wr1043n-v5.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9563_tplink_tl-wr1043n.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_tplink_tl-wr1043nd-v4.dts
|
ath79: drop num-cs for SPI controller
|
2020-12-04 15:50:24 +01:00 |
qca9563_ubnt_unifiac-lite.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_ubnt_unifiac-lite.dtsi
|
ath79: fix 10 Mbit PLL data for UniFi AC
|
2021-04-15 22:40:48 +02:00 |
qca9563_ubnt_unifiac-lr.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_ubnt_unifiac-mesh-pro.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_ubnt_unifiac-mesh.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_ubnt_unifiac-pro.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
qca9563_ubnt_unifiac-pro.dtsi
|
ath79: rename EEPROM to art
|
2019-11-27 22:54:36 +01:00 |
qca9563_ubnt_unifiac.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
qca9563_xiaomi_aiot-ac2350.dts
|
ath79: add support for Xiaomi AIoT Router AC2350
|
2021-07-05 00:28:04 +02:00 |
qca9563_yuncore_a782.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_yuncore_xd4200.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
qca9563_yuncore_xd4200.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |
tp9343_tplink_tl-wa901nd-v4.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
tp9343_tplink_tl-wa901nd-v5.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
tp9343_tplink_tl-wa901nd.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
tp9343_tplink_tl-wr94x.dtsi
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
2020-05-18 13:35:38 +02:00 |
tp9343_tplink_tl-wr940n-v3.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
tp9343_tplink_tl-wr940n-v3.dtsi
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
tp9343_tplink_tl-wr940n-v4.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
tp9343_tplink_tl-wr940n-v6.dts
|
ath79: remove model name from LED labels
|
2020-10-02 13:51:39 +02:00 |
tp9343_tplink_tl-wr941hp-v1.dts
|
ath79: add support for TP-Link TL-WR941HP v1
|
2021-07-04 18:07:35 +02:00 |
tp9343_tplink_tl-wr941nd-v6.dts
|
ath79: move dts-v1 statement to ath79.dtsi
|
2020-09-25 23:26:34 +02:00 |
tp9343_tplink_tl-wx.dtsi
|
ath79: enable UART in SoC DTSI files
|
2021-02-24 02:53:53 +01:00 |