mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
ath79: add support for Qualcomm AP143 reference boards
Specifications:
SoC: QCA9533
DRAM: 32Mb DDR1
Flash: 8/16Mb SPI-NOR
LAN: 4x 10/100Mbps via AR8229 switch (integrated into SoC)
on GMII
WAN: 1x 10/100Mbps via MII
WLAN: QCA9530
USB: 1x 2.0
UART: standard QCA UART header
JTAG: yes
Button: 1x WPS, 1x reset
LEDs: 8x LEDs
A version with 4Mb flash is also available, but due to lack of
enough space it's not supported.
As the original flash layout does not provide enough space for
the kernel (1472k), the firmware uses OKLI and concat flash to
overcome the limitation without changing the boot address of the
bootloaders.
Installation:
1. Original bootloader
Connect the board to ethernet
Set up a server with an IP address of 192.168.1.10
Make the openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin
available via TFTP
tftpboot 0x80060000 openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin
erase 0x9f050000 +$filesize
cp.b $fileaddr 0x9f050000 $filesize
Reboot the board.
2. pepe2k's u-boot_mod
Connect the board to ethernet
Set up a server with an IP address of 192.168.1.10
Make the openwrt-ath79-generic-qca_ap143-8m-squashfs-factory.bin
available via TFTP, as "firmware.bin"
run fw_upg
Reboot the board.
For the 16M version of the board, please use
openwrt-ath79-generic-qca_ap143-16m-squashfs-factory.bin
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
[use fwconcatX names, drop redundant uart status, fix IMAGE_SIZE,
set up IMAGE/factory.bin without metadata]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Zoltan HERPAI
Adrian Schmutzler
parent
9a172797e5
commit
1eb481206d
49
target/linux/ath79/dts/qca9533_qca_ap143-16m.dts
Normal file
49
target/linux/ath79/dts/qca9533_qca_ap143-16m.dts
Normal file
@ -0,0 +1,49 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9533_qca_ap143.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Atheros AP143 (16M) reference board";
|
||||
compatible = "qca,ap143-16m", "qca,qca9533";
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x0>;
|
||||
label = "firmware";
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
openwrt,ih-magic = <IH_MAGIC_OKLI>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
fwconcat0: partition@50000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x050000 0xe30000>;
|
||||
};
|
||||
|
||||
partition@e80000 {
|
||||
label = "loader";
|
||||
reg = <0xe80000 0x10000>;
|
||||
};
|
||||
|
||||
fwconcat1: partition@e90000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0xe90000 0x160000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
49
target/linux/ath79/dts/qca9533_qca_ap143-8m.dts
Normal file
49
target/linux/ath79/dts/qca9533_qca_ap143-8m.dts
Normal file
@ -0,0 +1,49 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9533_qca_ap143.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Atheros AP143 (8M) reference board";
|
||||
compatible = "qca,ap143-8m", "qca,qca9533";
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x0>;
|
||||
label = "firmware";
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
openwrt,ih-magic = <IH_MAGIC_OKLI>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
fwconcat0: partition@50000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x050000 0x630000>;
|
||||
};
|
||||
|
||||
partition@680000 {
|
||||
label = "loader";
|
||||
reg = <0x680000 0x10000>;
|
||||
};
|
||||
|
||||
fwconcat1: partition@690000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0x690000 0x160000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
125
target/linux/ath79/dts/qca9533_qca_ap143.dtsi
Normal file
125
target/linux/ath79/dts/qca9533_qca_ap143.dtsi
Normal file
@ -0,0 +1,125 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/mtd/partitions/uimage.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_wps;
|
||||
led-failsafe = &led_wps;
|
||||
led-running = &led_wps;
|
||||
led-upgrade = &led_wps;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wan {
|
||||
label = "green:wan";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "green:wlan";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "green:lan1";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "green:lan2";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "green:lan3";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "green:lan4";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wps: wps {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
mtd-mac-address = <&art 0x6>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
@ -260,6 +260,14 @@ pcs,cr3000)
|
||||
ucidef_set_led_switch "lan3" "LAN3" "blue:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x02"
|
||||
;;
|
||||
qca,ap143-8m|\
|
||||
qca,ap143-16m)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
|
||||
;;
|
||||
qihoo,c301)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
|
||||
;;
|
||||
|
||||
@ -192,7 +192,9 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:wan" "2:lan"
|
||||
;;
|
||||
comfast,cf-e560ac)
|
||||
comfast,cf-e560ac|\
|
||||
qca,ap143-8m|\
|
||||
qca,ap143-16m)
|
||||
ucidef_set_interface_wan "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
|
||||
|
||||
@ -48,6 +48,10 @@ define Build/append-loader-okli
|
||||
cat "$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE)" >> "$@"
|
||||
endef
|
||||
|
||||
define Build/append-loader-okli-uimage
|
||||
cat "$(KDIR)/loader-$(word 1,$(1)).uImage" >> "$@"
|
||||
endef
|
||||
|
||||
define Build/relocate-kernel
|
||||
rm -rf $@.relocate
|
||||
$(CP) ../../generic/image/relocate $@.relocate
|
||||
|
||||
@ -1900,6 +1900,43 @@ define Device/plasmacloud_pa300e
|
||||
endef
|
||||
TARGET_DEVICES += plasmacloud_pa300e
|
||||
|
||||
define Device/qca_ap143
|
||||
SOC := qca9533
|
||||
DEVICE_VENDOR := Qualcomm Atheros
|
||||
DEVICE_MODEL := AP143
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
SUPPORTED_DEVICES += ap143
|
||||
LOADER_TYPE := bin
|
||||
LOADER_FLASH_OFFS := 0x50000
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
||||
COMPILE := loader-$(1).bin loader-$(1).uImage
|
||||
COMPILE/loader-$(1).bin := loader-okli-compile
|
||||
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
|
||||
uImage lzma
|
||||
endef
|
||||
|
||||
define Device/qca_ap143-8m
|
||||
$(Device/qca_ap143)
|
||||
DEVICE_VARIANT := (8M)
|
||||
IMAGE_SIZE := 7744k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | pad-to 6336k | \
|
||||
append-loader-okli-uimage $(1) | pad-to 64k
|
||||
endef
|
||||
TARGET_DEVICES += qca_ap143-8m
|
||||
|
||||
define Device/qca_ap143-16m
|
||||
$(Device/qca_ap143)
|
||||
DEVICE_VARIANT := (16M)
|
||||
IMAGE_SIZE := 15936k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
|
||||
append-loader-okli-uimage $(1) | pad-to 64k
|
||||
endef
|
||||
TARGET_DEVICES += qca_ap143-16m
|
||||
|
||||
define Device/qihoo_c301
|
||||
$(Device/seama)
|
||||
SOC := ar9344
|
||||
|
||||
Loading…
Reference in New Issue
Block a user