openwrt/target/linux/ath79/dts
Adrian Schmutzler 153392e209 ath79: add support for TP-Link TL-WA801ND v3/v4
This ports support for these devices from ar71xx.

Specification:

- System-On-Chip: Qualcomm Atheros QCA9533
- CPU/Speed: v3: 560 MHz, v4: 650 MHz
- Flash: 4096 KiB
- RAM: 32 MiB
- Ethernet: 1 port @ 100M
- Wireless: SoC-integrated: QCA9533 2.4GHz 802.11bgn

In contrast to the implementation in ar71xx (reset and WiFi button),
the device actually features reset and WPS buttons.

Flashing instructions:

Upload the ...-factory.bin file via OEM web interface.

TFTP Recovery:

1. Set PC to fixed IP address 192.168.0.66
2. Download *-factory.bin image and rename it to
   wa801ndv3_tp_recovery.bin
3. Start a tftp server with the image file in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
   the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

TFTP recovery has only been tested with v3, and the Wiki states
that the procedure won't work for v4, which cannot be verified
or falsified at the moment.

Tested by Tim Ward (see forum):
https://forum.openwrt.org/t/ath79-support-for-tp-link-tl-wa901nd-v3-v4-v5/61246/13

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 9a477b833a)
2020-06-21 21:34:09 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: ar934x: use reset for usb-phy-analog 2020-02-23 08:27:32 +01:00
ar1022_iodata_wn-ag300dgr.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7100.dtsi ath79: fix dtc compiler warnings 2018-12-12 12:28:26 +01:00
ar7161_aruba_ap-105.dts ath79: add support for Aruba AP-105 2019-05-18 16:44:41 +02:00
ar7161_buffalo_wzr-hp-ag300h.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7161_dlink_dir-825-b1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7161_jjplus_ja76pf2.dts ath79: dts: fix ja76pf2 spi frequency 2019-09-29 11:29:57 +02:00
ar7161_netgear_wndr3700.dts ath79: wndr3700 series: fix wifi range & throughput 2020-06-09 22:46:21 +02:00
ar7161_netgear_wndr3700.dtsi ath79: wndr3700 series: fix wifi range & throughput 2020-06-09 22:46:21 +02:00
ar7161_netgear_wndr3700v2.dts ath79: WNDR3700 v1/v2: make u-boot env partition writable 2020-02-07 14:08:19 +01:00
ar7161_netgear_wndr3800.dts ath79: specify "firmware" partition format for Netgear WNDR3800 2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_buffalo_whr-g301n.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_netgear_wnr612-v2.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_netgear_wnr612-v2.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_on_n150r.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wa701nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-05-20 20:51:28 +02:00
ar7240_tplink_tl-wa730re-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-05-20 20:51:28 +02:00
ar7240_tplink_tl-wa801nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-05-20 20:51:28 +02:00
ar7240_tplink_tl-wa830re-v1.dts ath79: add support for TP-Link TL-WA830RE v1 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wa901nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-05-20 20:51:28 +02:00
ar7240_tplink_tl-wa.dtsi ath79: add support for TP-Link TL-WA830RE v1 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr740n-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr740n-v3.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr741-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr841-v5.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr941-v4.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink_tl-wr.dtsi ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240_tplink.dtsi ath79: reorganize DTSI for ar7240 TP-Link devices 2020-05-20 20:47:05 +02:00
ar7240.dtsi ath79: use ar8216 for builtin switch 2019-03-24 01:44:27 +01:00
ar7241_tplink_tl-mr3x20.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7241_tplink_tl-wr842n-v1.dts ath79: add support for TP-Link TL-WR842N/ND v1 router 2018-12-15 21:35:45 +01:00
ar7241_tplink.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7241_ubnt_airrouter.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
ar7241_ubnt_bullet-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_nanostation-loco-m.dts ath79: add support for Ubiquiti Nanostation Loco M (XM) 2020-02-21 14:12:30 +01:00
ar7241_ubnt_nanostation-m.dts ath79: align naming of Ubiquiti Nanostation M 2019-03-18 20:55:24 +01:00
ar7241_ubnt_picostation-m.dts ath79: add support for Ubiquiti Picostation M (XM) 2020-02-21 14:12:30 +01:00
ar7241_ubnt_rocket-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_unifi.dts ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm_outdoor.dtsi ath79: split ubnt outdoor device leds into separate dtsi 2018-12-03 07:58:49 +01:00
ar7241_ubnt_xm.dtsi ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar7242_avm_fritz300e.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7242_buffalo_bhr-4grv.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-bhr.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_tplink_tl-wr2543-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7242.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar9132_tplink_tl-wa901nd-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
ar9132.dtsi ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x 2018-08-28 11:26:53 +02:00
ar9330_glinet_gl-ar150.dts ath79: fix LEDs for GL.inet GL-AR150 2020-06-03 15:28:50 +02:00
ar9330_pqi_air-pen.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9330.dtsi ath79: ar9330: add missing watchdog node 2019-07-17 16:49:54 +02:00
ar9331_8dev_carambola2.dts ath79: add support for 8devices Carambola2 development board 2019-06-05 10:24:45 +02:00
ar9331_embeddedwireless_dorin.dts ar71xx/ath79: ew-dorin, fix the trigger level for WPS button 2020-03-11 11:26:06 +01:00
ar9331_etactica_eg200.dts ath79: etactica-eg200: fix restore button 2019-08-30 23:03:18 +02:00
ar9331_pisen_wmm003n.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-mr10u.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts ath79: dts: add missing 'serial0' alias for TP-Link TL-MR3040v2 2020-05-11 11:17:59 +02:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-wr703n.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr710n-v1.dts ath79: add TP-Link TL-WR710N v1 2019-03-24 01:44:27 +01:00
ar9331_tplink_tl-wr740n-v4.dts ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 2019-02-14 16:56:14 +01:00
ar9331_tplink_tl-wr740n-v5.dts ath79: add support for TP-Link TL-WR740N v5 2020-03-14 13:27:41 +01:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9341_pcs_cr3000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341_tplink_tl-mr3420-v2.dts ath79: migrate TP-Link TL-MR3420v2 to ath79 2020-05-20 20:47:01 +02:00
ar9341_tplink_tl-wa850re-v1.dts ath79: add support for TP-Link TL-WA850RE v1 2020-03-27 17:14:58 +01:00
ar9341_tplink_tl-wa860re-v1.dts ath79: add support for TP-Link TL-WA860RE v1 2020-03-27 17:15:07 +01:00
ar9341_tplink_tl-wa.dtsi ath79: add support for TP-Link TL-WA850RE v1 2020-03-27 17:14:58 +01:00
ar9341_tplink_tl-wr841-v8.dts ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2 2020-02-21 14:12:30 +01:00
ar9341_tplink_tl-wr842n-v2.dts ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2 2020-02-21 14:12:30 +01:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9342_iodata_etg3-r.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9342_ubnt_bullet-m-xw.dts ath79: ubnt-bullet-m-xw: Remove eth1 disabled node 2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanobeam-ac.dts ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC 2020-05-04 21:31:04 +02:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac.dts ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC 2020-05-04 21:31:04 +02:00
ar9342_ubnt_nanostation-loco-m-xw.dts ath79: add missing reset-gpios for NanoStation Loco M (XW) 2020-02-26 16:49:44 +01:00
ar9342_ubnt_nanostation-m-xw.dts ath79: Add support for Ubiquiti Nanostation M (XW) 2019-03-05 03:15:52 +01:00
ar9342_ubnt_wa.dtsi ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_xw.dtsi ath79: fix DTS node names for Ubiquiti XW partitions 2020-02-07 14:10:02 +01:00
ar9344_comfast_cf-e120a-v3.dts ath79: add support for COMFAST CF-E120A v3 2019-02-28 11:26:10 +01:00
ar9344_dlink_dir-8x5.dtsi ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-825-c1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-835-a1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_ocedo_raccoon.dts ath79: fix OCEDO Raccoon 10Mbit PLL value 2019-05-05 21:11:01 +02:00
ar9344_pcs_cap324.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_tplink_tl-wdr3500-v1.dts ath79: add support for TP-Link WDR3500 v1 2020-03-20 12:22:18 +01:00
ar9344_tplink_tl-wdr3600-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-17 22:47:28 +02:00
ar9344_tplink_tl-wdr4300-v1-il.dts ath79: add support for TP-Link TL-WDR4300 v1 (IL) 2019-12-13 20:01:45 +01:00
ar9344_tplink_tl-wdr4300-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-17 22:47:28 +02:00
ar9344_tplink_tl-wdr4300.dtsi ath79: add support for TP-Link WDR3500 v1 2020-03-20 12:22:18 +01:00
ar9344_tplink_tl-wdr4310-v1.dts ath79: add support for TP-Link TL-WDR4310 v1 2020-03-30 19:36:15 +02:00
ar9344_tplink_tl-wdrxxxx.dtsi ath79: add support for TP-Link WDR3500 v1 2020-03-20 12:22:18 +01:00
ar9344_wd_mynet-n750.dts ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: convert WD MyNet Range Extender to gpio-keys 2019-05-18 17:59:49 +02:00
ar9344_winchannel_wb2000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_zbtlink_zbt-wd323.dts ath79: Add support for ZBT-WD323 2019-06-05 10:24:36 +02:00
ar9344.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2020-02-11 13:39:26 +01:00
ath79.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
qca953x_tplink_tl-wr810n.dtsi ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca953x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2020-02-11 13:39:26 +01:00
qca956x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2020-02-11 13:39:26 +01:00
qca9531_comfast_cf-e5.dts ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
qca9531_engenius_ews511ap.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-ar300m-lite.dts ath79: Clean up GL-AR300M DTS/DTSI inclusions 2019-11-03 14:02:25 +01:00
qca9531_glinet_gl-ar300m-nand.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nor.dts ath79: Clean up GL-AR300M DTS/DTSI inclusions 2019-11-03 14:02:25 +01:00
qca9531_glinet_gl-ar300m.dtsi ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-x750.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_tplink_archer-d50-v1.dts ath79: add support for TP-Link Archer D50 V1 2019-05-18 17:59:49 +02:00
qca9531_tplink_tl-wr810n-v1.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9531_yuncore_a770.dts ath79: add support for YunCore A770 2019-03-09 16:31:17 +01:00
qca9533_comfast_cf-e110n-v2.dts ath79: add support for COMFAST CF-E110N 2018-12-31 16:25:11 +01:00
qca9533_tplink_cpe210-v2.dts ath79: Add support for TP-Link CPE210 v2 2019-04-02 02:10:59 +02:00
qca9533_tplink_cpe210-v3.dts ath79: Add support for TP-Link CPE210 v3 2019-04-02 02:10:59 +02:00
qca9533_tplink_cpe210.dtsi ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
qca9533_tplink_cpe220-v3.dts ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
qca9533_tplink_cpexxx.dtsi ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
qca9533_tplink_tl-wa801nd-v3.dts ath79: add support for TP-Link TL-WA801ND v3/v4 2020-06-21 21:34:09 +02:00
qca9533_tplink_tl-wa801nd-v4.dts ath79: add support for TP-Link TL-WA801ND v3/v4 2020-06-21 21:34:09 +02:00
qca9533_tplink_tl-wa801nd.dtsi ath79: add support for TP-Link TL-WA801ND v3/v4 2020-06-21 21:34:09 +02:00
qca9533_tplink_tl-wr802n-v1.dts ath79: add support for TP-Link TL-WR802N V1 and V2 2020-06-03 15:29:37 +02:00
qca9533_tplink_tl-wr802n-v2.dts ath79: add support for TP-Link TL-WR802N V1 and V2 2020-06-03 15:29:37 +02:00
qca9533_tplink_tl-wr802n.dtsi ath79: add support for TP-Link TL-WR802N V1 and V2 2020-06-03 15:29:37 +02:00
qca9533_tplink_tl-wr810n-v2.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts ath79: add support for TP-Link TL-WR841N/ND v10 2020-01-08 18:32:52 +01:00
qca9533_tplink_tl-wr841-v10.dts ath79: add support for TP-Link TL-WR841N/ND v10 2020-01-08 18:32:52 +01:00
qca9533_tplink_tl-wr841-v11.dts ath79: add support for TP-Link TL-WR841N/ND v12 2020-01-08 18:35:34 +01:00
qca9533_tplink_tl-wr841-v11.dtsi ath79: add support for TP-Link TL-WR841N/ND v12 2020-01-08 18:35:34 +01:00
qca9533_tplink_tl-wr841-v12.dts ath79: add support for TP-Link TL-WR841N/ND v12 2020-01-08 18:35:34 +01:00
qca9533_tplink_tl-wr841.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9533_tplink_tl-wr842n-v3.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9533_ubnt_acb-isp.dts ath79: add support for Ubiquiti airCube ISP 2019-04-08 18:37:04 +02:00
qca9557_buffalo_bhr-4grv2.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2020-02-11 13:39:26 +01:00
qca9558_devolo_dvl1xxx.dtsi ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200e.dts ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200i.dts ath79: add support for devolo WiFi pro 1200i 2019-01-05 21:55:22 +01:00
qca9558_devolo_dvl1750c.dts ath79: add support for devolo WiFi pro 1750c 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1750e.dts ath79: add support for Devolo WiFi Pro 1750e 2019-01-26 21:46:33 +01:00
qca9558_devolo_dvl1750i.dts ath79: add support for devolo WiFi pro 1750i 2019-01-05 21:55:22 +01:00
qca9558_devolo_dvl1750x.dts ath79: add support for devolo WiFi pro 1750x 2019-07-21 13:09:45 +02:00
qca9558_engenius_ecb1750.dts ath79: ecb1750: additional dts fixes 2019-05-27 22:44:08 +02:00
qca9558_engenius_epg5000.dts ath79: fix leds description for EnGenius EPG5000 2019-03-18 20:42:29 +01:00
qca9558_librerouter_librerouter-v1.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_netgear_ex6400.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dtsi ath79: fix gigabit link pll-data for EX7300 2019-10-21 09:08:58 +02:00
qca9558_ocedo_koala.dts ath79: fix OCEDO Koala ethernet configuration 2018-12-30 20:08:13 +01:00
qca9558_ocedo_ursus.dts ath79: correct OCEDO Ursus phy-mode property 2019-09-07 00:59:41 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_tplink_archer-c5-v1.dts ath79: add support for TP-Link Archer C5 v1 2019-02-28 11:32:55 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_re350k-v1.dts ath79: add support for TP-Link RE350K v1 2019-03-11 22:00:26 +01:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr941n-v7-cn.dts ath79: add support for TP-Link TL-WR941N v7 (CN) 2019-03-24 01:44:27 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9561_avm_fritz4020.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9561_tplink_archer-c5x.dtsi ath79: add support for Archer C58/C59 v1 2018-11-26 12:05:45 +01:00
qca9561_tplink_archer-c6x.dtsi ath79: add support for TP-Link Archer C60 v3 2020-03-20 12:22:18 +01:00
qca9561_tplink_archer-c25-v1.dts ath79: Add support for TP-Link Archer C25 v1 2019-06-10 11:25:47 +02:00
qca9561_tplink_archer-c58-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c59-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c60-v1.dts ath79: add support for TP-Link Archer C60 v3 2020-03-20 12:22:18 +01:00
qca9561_tplink_archer-c60-v2.dts ath79: add support for TP-Link Archer C60 v3 2020-03-20 12:22:18 +01:00
qca9561_tplink_archer-c60-v3.dts ath79: add support for TP-Link Archer C60 v3 2020-03-20 12:22:18 +01:00
qca9561_xiaomi_mi-router-4q.dts ath79: add support for Xiaomi Mi Router 4Q 2019-02-11 19:04:06 +01:00
qca9563_dlink_dir-859-a1.dts ath79: remap D-Link DIR-859 A1 WPS button to WPS 2019-11-16 23:35:44 +01:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-ghbk2-i.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_glinet_gl-ar750s.dts ath79: glinet_gl-ar750s: Add USB power & microSD 2019-05-20 21:25:00 +02:00
qca9563_nec_wg800hp.dts ath79: add support for NEC Aterm WG800HP 2018-12-24 19:18:07 +01:00
qca9563_nec_wg1200cr.dts ath79: add support for NEC Aterm WG1200CR 2019-04-06 19:14:06 +02:00
qca9563_phicomm_k2t.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts ath79: use the qca,qca9563 chip compatible for the WR818 2019-05-18 17:59:49 +02:00
qca9563_tplink_archer-a7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-c2-v3.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_archer-c6-v2.dts ath79: add support for TP-Link Archer C6 v2 2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-c7-v4.dts ath79: Consistently label info partition 2019-06-10 11:25:41 +02:00
qca9563_tplink_archer-c7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-x6-v2.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_archer-x7-v5.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_re450-v2.dts ath79: Consistently label info partition 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n-v5.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for UniFi AC-LR 2019-10-27 18:31:53 +01:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lr.dts ath79: add support for UniFi AC-LR 2019-10-27 18:31:53 +01:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: fix UniFi AC LED mapping 2019-09-15 12:31:56 +02:00
qca9563_yuncore_a782.dts ath79: add support for YunCore XD4200 and A782 2019-11-26 18:17:39 +01:00
qca9563_yuncore_xd4200.dts ath79: add support for YunCore XD4200 and A782 2019-11-26 18:17:39 +01:00
qca9563_yuncore_xd4200.dtsi ath79: add support for YunCore XD4200 and A782 2019-11-26 18:17:39 +01:00
tp9343_tplink_tl-wa901nd-v4.dts ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-20 21:06:48 +02:00
tp9343_tplink_tl-wa901nd-v5.dts ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-20 21:06:48 +02:00
tp9343_tplink_tl-wa901nd.dtsi ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-20 21:06:48 +02:00
tp9343_tplink_tl-wr94x.dtsi ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-20 21:06:48 +02:00
tp9343_tplink_tl-wr940n-v3.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2020-05-20 20:11:33 +02:00
tp9343_tplink_tl-wr940n-v3.dtsi ath79: add support for TP9343-based TP-Link TL-WR94x devices 2020-05-20 20:11:33 +02:00
tp9343_tplink_tl-wr940n-v4.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2020-05-20 20:11:33 +02:00
tp9343_tplink_tl-wr940n-v6.dts ath79: add support for TP-Link TL-WR940N v6 2020-05-20 20:47:05 +02:00
tp9343_tplink_tl-wr941nd-v6.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2020-05-20 20:11:33 +02:00
tp9343_tplink_tl-wx.dtsi ath79: add support for TP-Link TL-WA901ND v4 and v5 2020-05-20 21:06:48 +02:00