mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-18 18:56:37 +00:00
ath79: add support for TP-Link TL-WA860RE v1
This ports support for the TL-WA860RE v1 range extender from ar71xx
to ath79.
Specifications:
Board: AP123 / AR9341 rev. 3
Flash/RAM: 4/32 MiB
CPU: 535 MHz
WiFi: 2.4 GHz b/g/n
Ethernet: 1 port (100M)
Two external antennas
Flashing instructions:
Upload the factory image via the vendor firmware upgrade option.
Recovery:
Note that this device does not provide TFTP via ethernet like many
other TP-Link devices do. You will have to open the case if you
require recovery beyond failsafe.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Sebastian Knapp <sebastian4842@outlook.com>
(cherry picked from commit 385f4868bc
)
This commit is contained in:
parent
2e6bfab8c5
commit
bdbda30384
@ -174,7 +174,8 @@ tplink,re450-v2)
|
||||
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
|
||||
;;
|
||||
tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2)
|
||||
tplink,tl-mr3040-v2|\
|
||||
tplink,tl-wa860re-v1)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||
;;
|
||||
tplink,tl-wa850re-v1)
|
||||
|
@ -32,6 +32,7 @@ ath79_setup_interfaces()
|
||||
tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2|\
|
||||
tplink,tl-wa850re-v1|\
|
||||
tplink,tl-wa860re-v1|\
|
||||
tplink,tl-wa901nd-v2|\
|
||||
tplink,tl-wr703n|\
|
||||
ubnt,bullet-m|\
|
||||
|
72
target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts
Normal file
72
target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts
Normal file
@ -0,0 +1,72 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "ar9341_tplink_tl-wa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link TL-WA860RE v1";
|
||||
compatible = "tplink,tl-wa860re-v1", "qca,ar9341";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_orange;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_orange;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
onoff {
|
||||
label = "ONOFF";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "tp-link:green:lan";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "tp-link:green:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "tp-link:orange:power";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan_green {
|
||||
label = "tp-link:green:wlan";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wlan_orange {
|
||||
label = "tp-link:orange:wlan";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
@ -61,6 +61,15 @@ define Device/tplink_tl-wa850re-v1
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wa850re-v1
|
||||
|
||||
define Device/tplink_tl-wa860re-v1
|
||||
$(Device/tplink-4mlzma)
|
||||
ATH_SOC := ar9341
|
||||
DEVICE_TITLE := TP-Link TL-WA860RE v1
|
||||
TPLINK_HWID := 0x08600001
|
||||
SUPPORTED_DEVICES += tl-wa860re
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wa860re-v1
|
||||
|
||||
define Device/tplink_tl-wa901nd-v2
|
||||
$(Device/tplink-4m)
|
||||
ATH_SOC := ar9132
|
||||
|
Loading…
Reference in New Issue
Block a user