ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-18 18:56:37 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

ath79: fix LEDs for GL.inet GL-AR150

Browse Source 
Since the wireless LED was used for boot and set up with a DT
trigger, the WiFi indication hasn't worked on ath79 at all.

In addition, a look into the manual revealed that the OEM
configuration is as follows:

LED 1 (green): power
LED 2 (green): configurable
LED 3 (red): wireless

So, let's just keep the WiFi trigger and convert the rest to its
"intended" use.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 705fe43522)
This commit is contained in:
Adrian Schmutzler 2020-05-31 12:46:26 +02:00
parent 21454a772b
commit e36bdd5dc5
2 changed files with 10 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@ -74,10 +74,6 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
glinet,gl-ar150)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
;;
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor)
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"

18
target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
View File

@ -12,28 +12,30 @@
aliases {
serial0 = &uart;
led-boot = &wlan;
led-failsafe = &wlan;
led-upgrade = &wlan;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
wlan: wlan {
wlan {
label = "gl-ar150:orange:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "gl-ar150:green:lan";
configurable {
label = "gl-ar150:green:configurable";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wan {
label = "gl-ar150:green:wan";
led_power: power {
label = "gl-ar150:green:power";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};