openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00

Author	SHA1	Message	Date
Hauke Mehrtens	7c0208b336	brcm47xx: update tg3 to the version send upstream SVN-Revision: 35573	2013-02-12 20:09:15 +00:00
Luka Perkov	7973ef64d6	mvebu: remove boards suffix SVN-Revision: 35572	2013-02-12 10:18:53 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	1f9ede9cfc	ar71xx: add script for automatic switch name migration Thanks to Jonas Gorski for the help. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35567	2013-02-11 21:41:16 +00:00
Felix Fietkau	2e7a4b088d	ar71xx: allow unknown multicast frames to pass to the CPU on AR934x SVN-Revision: 35564	2013-02-11 18:59:05 +00:00
Gabor Juhos	9525a075c1	ar8216: remove superfluous code from ar8216_config_init Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562	2013-02-11 16:57:31 +00:00
Gabor Juhos	94806a13af	ar71xx: use switchX names in network configuration Accessing the AR8xxx switches via the name of the attached ethernet device is not possible since r35560. Change the uci-defaults script to use switchX names in switch configurations. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35561	2013-02-11 16:54:52 +00:00
Gabor Juhos	9c86d268eb	generic: ar8216: don't use ethernet device name in register_switch The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560	2013-02-11 16:11:31 +00:00
Gabor Juhos	3f3eba88f6	generic: ar8216: reuse the private data from ar8216_probe The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559	2013-02-11 16:11:30 +00:00
Gabor Juhos	1afb759b35	generic: ar8216: use phydev instead of pdev everywhere Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555	2013-02-11 13:25:43 +00:00
Gabor Juhos	0b1fe07e8e	generic: ar8216: use pr_* macros for kernel messages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554	2013-02-11 13:14:00 +00:00
Gabor Juhos	eea297884e	generic: ar8216: fix PHY features setup Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549	2013-02-11 10:05:35 +00:00
Gabor Juhos	617076c613	generic: ar8216: add ar8xxx_probe_switch helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547	2013-02-10 19:02:01 +00:00
Gabor Juhos	98b13e39ac	generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546	2013-02-10 18:42:08 +00:00
Gabor Juhos	f97170a720	generic: ar8216: free mib counters from ar8xxx_free Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545	2013-02-10 18:42:07 +00:00
Gabor Juhos	7924e517af	generic: ar8216: add ar8xxx_free helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544	2013-02-10 18:42:05 +00:00
Gabor Juhos	77b3c551c4	generic: ar8216: add ar8xxx_create{,mii} helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543	2013-02-10 18:42:04 +00:00
Gabor Juhos	5f70b1db2a	generic: ar8216: remove redundant phy address check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542	2013-02-10 18:38:12 +00:00
Gabor Juhos	14fd37258b	generic: ar8216: only set phy_ptr if packet mangling is used Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541	2013-02-10 18:38:10 +00:00
Gabor Juhos	393163b098	generic: ar8216: add defines for the AR8316 POSTRIP register Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539	2013-02-10 13:18:48 +00:00
Gabor Juhos	5ed480598d	generic: ar8216: don't probe the chip multiple times It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538	2013-02-10 13:05:15 +00:00
Gabor Juhos	774da6c7a4	generic: ar8216: add sanity check to ar8216_probe Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537	2013-02-10 13:05:14 +00:00
Gabor Juhos	4720c75cf7	generic: ar8216: skip probe on unused PHY addresses Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536	2013-02-10 13:05:12 +00:00
Jonas Gorski	f07a33afc2	ar71xx: register the micro sd card reader on RB493G Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35535	2013-02-10 12:31:38 +00:00
Jonas Gorski	eedc3554fe	generic: b53: fix reverted error check in probe b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534	2013-02-10 12:31:36 +00:00
Jonas Gorski	200359a520	bcm63xx: handle huawei nvram layout Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533	2013-02-10 12:31:31 +00:00
Gabor Juhos	de123c4409	generic: ar8216: move sleep out of the loop It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532	2013-02-09 13:26:04 +00:00
Gabor Juhos	6ff973bdda	ar71xx: Routerboard 751 Mac Address Offset Fix We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519	2013-02-08 09:34:53 +00:00
Gabor Juhos	aa04441904	generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518	2013-02-08 09:13:18 +00:00
Gabor Juhos	9c1f95a416	generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517	2013-02-08 09:13:14 +00:00
Gabor Juhos	5393efc0c7	generic: ar8216: use inline function to convert swdev to ar8216 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514	2013-02-07 15:18:36 +00:00
Gabor Juhos	b87a1c757d	generic: ar8216: add mii_bus field to struct ar8216_priv Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513	2013-02-07 15:18:35 +00:00
Gabor Juhos	c130a3feac	generic: mvswitch: add detach callback Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512	2013-02-07 15:18:34 +00:00
Gabor Juhos	4be8c22e74	generic: ar8216: add detach callback The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511	2013-02-07 15:18:32 +00:00
Gabor Juhos	fe61fc2d7d	generic: add detach callback to struct phy_driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510	2013-02-07 15:18:24 +00:00
Hauke Mehrtens	07db9e8eab	brcm47xx: fix name of kmod-ocf-ubsec-ssb This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509	2013-02-06 22:51:25 +00:00
Hauke Mehrtens	a52832164b	brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up This fixes #12927. SVN-Revision: 35507	2013-02-06 14:57:00 +00:00
Florian Fainelli	6b0da6db6a	remove support for 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506	2013-02-05 22:36:54 +00:00
Florian Fainelli	e22926a46b	make default version 3.7.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505	2013-02-05 22:36:50 +00:00
Florian Fainelli	57803a98ec	remove superfluous calls to /lib/brcm63xx.sh The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504	2013-02-05 22:25:30 +00:00
Florian Fainelli	84d306d23c	remove references to the old switch driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503	2013-02-05 22:25:19 +00:00
Mirko Vogt	ec19a23bae	fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W SVN-Revision: 35501	2013-02-05 14:57:43 +00:00
Mirko Vogt	f460388ce2	add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500	2013-02-05 14:57:40 +00:00
Gabor Juhos	395d0bdc1f	generic: ar8216: clear driver specific data pointer in phy_device This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497	2013-02-05 08:39:26 +00:00
Gabor Juhos	2e7f38c243	generic: ar8216: unregister switch on error path Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496	2013-02-05 08:39:24 +00:00
Gabor Juhos	1bb8ad6050	mpc85xx: enable GPIO sysfs interface Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35495	2013-02-05 07:48:02 +00:00
Gabor Juhos	6ba265a573	mpc85xx: enable Freescale eSPI driver and m25p80 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35494	2013-02-05 07:48:01 +00:00
Gabor Juhos	eea43ffd33	mpc85xx: sync kernel config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35493	2013-02-05 07:47:59 +00:00
Hauke Mehrtens	8ba8225686	brcm47xx: fix detection of Asus RT-N16 This fixes #12936. SVN-Revision: 35492	2013-02-04 22:49:05 +00:00
Hauke Mehrtens	a1e3c0ca46	Add Failsafe support for Linksys E3000V1 / WRT610NV2 Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491	2013-02-04 22:40:57 +00:00
Hauke Mehrtens	c2198aba32	brcm47xx: Fix switch config on 4716/53115 devices Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490	2013-02-04 22:38:37 +00:00
Gabor Juhos	b97aee1ee8	coldfire: R.I.P. The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35489	2013-02-04 15:23:10 +00:00
Gabor Juhos	c41002971a	leon: R.I.P. It is broken since ~9 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35488	2013-02-04 15:23:08 +00:00
Gabor Juhos	539e0b5b84	imx21: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35487	2013-02-04 15:23:07 +00:00
Gabor Juhos	e7dee4ea87	octeon: R.I.P. It is broken since ~8 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35486	2013-02-04 15:23:05 +00:00
Gabor Juhos	da44b916cf	omap35xx: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35485	2013-02-04 15:23:04 +00:00
Jonas Gorski	8506964e6d	bcm63xx: add support for linux 3.8 Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482	2013-02-04 10:19:55 +00:00
Jonas Gorski	3b4fced67d	bcm63xx: add support for linux 3.7 Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481	2013-02-04 10:19:50 +00:00
Jonas Gorski	0e9365b346	kernel: generic: update the ehci overcurrent patch to upstream submission Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35480	2013-02-04 10:19:37 +00:00
Jonas Gorski	e0fe5596f8	kernel: generic: add back the patch exporting bcm63xx tag header It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35479	2013-02-04 10:19:35 +00:00
Jonas Gorski	34ad8f4e75	kernel: generic: update to 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35478	2013-02-04 10:19:28 +00:00
Jonas Gorski	a15e1a950d	bcm63xx: refresh 3.6 patches Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477	2013-02-04 10:19:24 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	b1168e70d3	ar71xx: use backported PCI_MEM_SIZE patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35470	2013-02-02 18:17:58 +00:00
Gabor Juhos	b9b341f05a	ar71xx: rename ar933x_uart patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35469	2013-02-02 18:17:53 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	4ac6eb480b	x86/kvm_guest: add support for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35460	2013-02-02 15:31:57 +00:00
Gabor Juhos	c340ef2ae2	x86: add missing symbols for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35459	2013-02-02 15:31:55 +00:00
Gabor Juhos	0f46f47512	x86/kvm_guest: add missing symbols for 3.3 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35458	2013-02-02 15:31:54 +00:00
Gabor Juhos	ab3e3cacaa	alix2: convert from kernel version 3.3.8 to 3.7.5 [juhosg: use 3.7.5 instead of 3.7.3] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35457	2013-02-02 15:31:52 +00:00
Gabor Juhos	4c223d7d4f	generic: convert crypto-ocf from kernel_thread to kthread recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35456	2013-02-02 15:31:44 +00:00
Gabor Juhos	7c87d28054	ar71xx: fixes whitespaces for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35455	2013-02-02 15:02:19 +00:00
Gabor Juhos	ecf55822bb	mpc85xx: nuke 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35453	2013-02-02 10:05:43 +00:00
Gabor Juhos	242859abae	mpc85xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35452	2013-02-02 10:05:40 +00:00
Gabor Juhos	cde71c305c	mpc85xx: add support for linux 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35451	2013-02-02 10:05:37 +00:00
Gabor Juhos	bbfd8cbf94	linux/3.7: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35450	2013-02-02 10:05:08 +00:00
Gabor Juhos	9a438b2271	ar71xx: build images for the TP-LINK TL-WR743ND v2 AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35449	2013-02-02 10:01:15 +00:00
Gabor Juhos	668e529220	generic: fix gc_sections patch Due to the patch, essential '.data..' sections are merged into the '.data' section: --- vmlinux.good.sect 2013-02-01 23:49:16.000000000 +0100 +++ vmlinux.bad.sect 2013-02-01 23:49:02.000000000 +0100 @@ -1,5 +1,5 @@ -vmlinux.good: file format elf32-powerpc +vmlinux.bad: file format elf32-powerpc Sections: Idx Name Size VMA LMA File off Algn @@ -53,43 +53,35 @@ CONTENTS, ALLOC, LOAD, READONLY, DATA 24 .machine.desc 00000460 c04e1000 004e1000 004f1000 22 CONTENTS, ALLOC, LOAD, DATA - 25 .data 0000f6a0 c04e2000 004e2000 004f2000 212 + 25 .data 0001635c c04e2000 004e2000 004f2000 212 CONTENTS, ALLOC, LOAD, DATA - 26 .data..init_task 00002000 c04f2000 004f2000 00502000 23 - CONTENTS, ALLOC, LOAD, DATA - 27 .data..page_aligned 00002000 c04f4000 004f4000 00504000 212 - CONTENTS, ALLOC, LOAD, DATA - 28 .data..cacheline_aligned 00000c00 c04f6000 004f6000 00506000 25 - CONTENTS, ALLOC, LOAD, DATA - 29 .data..read_mostly 000015e0 c04f6c00 004f6c00 00506c00 23 - CONTENTS, ALLOC, LOAD, DATA - 30 .sbss 000002e0 c04f9000 004f9000 005081e0 23 + 26 .sbss 000002e0 c04fa000 004fa000 0050835c 23 <...> This causes boot hang on powerpc. Modify the patch to ensure that the kernel specific '.data..' sections remain separate. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35447	2013-02-02 09:30:47 +00:00
Gabor Juhos	31af0dc186	ar71xx: fix mac address calculation on the OpenMesh MR600 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35446	2013-02-02 08:47:41 +00:00
Gabor Juhos	257b21f2d4	mpc85xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35445	2013-02-01 17:49:56 +00:00
Gabor Juhos	cf2faab4ae	mpc85xx: switch to 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35444	2013-02-01 17:49:54 +00:00
Gabor Juhos	56849d146c	mpc85xx: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35443	2013-02-01 17:49:53 +00:00
Gabor Juhos	630fffbead	mpc85xx: fix dts name for P1010RDB Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35442	2013-02-01 17:49:52 +00:00
Gabor Juhos	a2529eab2b	linux/3.6: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35441	2013-02-01 17:30:18 +00:00
Gabor Juhos	fb936218a1	linux/3.6: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35440	2013-02-01 17:30:15 +00:00
Gabor Juhos	495820f7a0	mpc85xx: remove broken flag Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35439	2013-02-01 17:28:54 +00:00
Gabor Juhos	4cb7e749ab	mpc85xx: build fdt file for the PB1010RDB board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35438	2013-02-01 17:28:51 +00:00
Gabor Juhos	20ca35570e	mpc85xx: enable PB1010RDB support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35437	2013-02-01 17:28:49 +00:00
Gabor Juhos	21b15ddda5	mpc85xx: image: fix building of multiple dtb files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35436	2013-02-01 17:28:47 +00:00
Gabor Juhos	d158dfc607	linux/3.3: disable crashlog on PPC It causes NULL pointer dereference: [ 0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c [ 0.644090] Unable to handle kernel paging request for data at address 0x00000000 [ 0.651533] Faulting instruction address: 0xc025d620 [ 0.656483] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.661856] P1010 RDB [ 0.664113] Modules linked in: [ 0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38 [ 0.672101] REGS: c7831ef0 TRAP: 0300 Not tainted (3.3.8) [ 0.677740] MSR: 00029000 <CE,EE,ME> CR: 42022082 XER: 20000000 [ 0.683817] DEAR: 00000000, ESR: 00000000 [ 0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000 [ 0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff [ 0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000 [ 0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000 [ 0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824 [ 0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8 [ 0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8 [ 0.736503] Call Trace: [ 0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable) [ 0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198 [ 0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120 [ 0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68 [ 0.762022] Instruction dump: [ 0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0 [ 0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35435	2013-02-01 17:28:44 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	6805275fdc	ar71xx: sysupgrade - fix OpenMesh MR600 total flash size Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35433	2013-02-01 15:50:54 +00:00
Gabor Juhos	979676ffcc	ar71xx: add sysupgrade support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35430	2013-02-01 15:50:47 +00:00
Gabor Juhos	2af995ba1d	ar71xx: add user-space support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35429	2013-02-01 15:50:45 +00:00
Gabor Juhos	8837d3a49b	ar71xx: add kernel support for the OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35428	2013-02-01 15:50:42 +00:00
Gabor Juhos	150bb9d0b1	ar71xx: remove unused OpenMesh MR600 led definitions Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35427	2013-02-01 15:50:39 +00:00
Gabor Juhos	fe3db74276	ar71xx: remove unused OpenMesh MR6000 platform code Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35426	2013-02-01 15:50:37 +00:00
Gabor Juhos	492cbcdd6b	ar71xx: build image for the TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35425	2013-02-01 15:50:34 +00:00
Gabor Juhos	119dc460a3	ar71xx: add user-space support for TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35424	2013-02-01 15:50:32 +00:00
Gabor Juhos	5bd02ca895	ar71xx: add kernel support for the TL-WDR3500 board WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet, and has only 1 USB port. Pending issues: * Leds are not working at all (except power and wlan_5g) * LAN switch ethernet ports are reversed with respect to case label. [Label] -> soft device [LAN1] -> eth0.4 [LAN2] -> eth0.3 [LAN3] -> eth0.2 [LAN4] -> eth0.1 Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35423	2013-02-01 15:50:29 +00:00
Jonas Gorski	ce8b226046	bcm63xx: replace kmod-switch with swconfig in default package set Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35407	2013-01-30 00:19:21 +00:00
Gabor Juhos	f7ff677169	ar71xx: add profile and build image for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403	2013-01-29 22:50:57 +00:00
Gabor Juhos	2a5193308f	ar71xx: add user space support for dir-825-c1 [juhosg: fix whitespaces in some scripts] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35402	2013-01-29 22:50:54 +00:00
Gabor Juhos	800da21cb1	ar71xx: add kernel support for dir-825-c1 [juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35401	2013-01-29 22:50:50 +00:00
Gabor Juhos	5a2aa8f184	generic: fix default compression selection in ubifs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35398	2013-01-29 21:32:22 +00:00
Gabor Juhos	da9a704e92	ar71xx: add profile and generate images for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35397	2013-01-29 19:12:34 +00:00
Gabor Juhos	5d4ddbce72	ar71xx: add user-space support for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35396	2013-01-29 19:12:32 +00:00
Gabor Juhos	5ca187570f	ar71xx: add kernel support for Atheros AP132 Reference Board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35395	2013-01-29 19:12:30 +00:00
Gabor Juhos	8a9d92f125	ar71xx: fix ethernet device registration for the QCA9556 SoC Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35394	2013-01-29 19:12:28 +00:00
Gabor Juhos	e9dbff1193	ar71xx: add kernel support for the QCA9556 SoC Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35393	2013-01-29 19:12:26 +00:00
Gabor Juhos	df15e5cd61	ar71xx: enable fast flash read on dual-flash devices This improves flash read speed on various Buffalo units. mtd_speedtest results on the WZR-HP-AG300H: old new delta eraseblock read speed: 726 KiB/s 2068 KiB/s +184.85% page read speed: 699 KiB/s 1973 KiB/s +182.26% 2 page read speed: 711 KiB/s 2043 KiB/s +187.34% Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35392	2013-01-29 19:12:25 +00:00
Gabor Juhos	562ba537fc	kernel: update linux 3.7 to 3.7.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35390	2013-01-29 18:29:45 +00:00
John Crispin	c6744513a3	fix mtd_mp25p80_add_gd25q32_gd25q64.patch SVN-Revision: 35378	2013-01-29 11:06:57 +00:00
Florian Fainelli	714b2cfef3	Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit. The patch was added to "linux/generic/patches-3.6" instead of "target/linux/generic/patches-3.6". I also fixed a missing patch space and refreshed generic patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35367	2013-01-29 09:46:11 +00:00
Gabor Juhos	e252a1492c	generic: fix build failure in MIPS kexec code if SMP is enabled Fix it for older kernels as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35366	2013-01-29 09:44:58 +00:00
Gabor Juhos	22ce389e6a	ar71xx: add TP-LINK WA-801ND to run-time model detection A small cosmetic fix to show the HW model name correctly in LuCI. Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35365	2013-01-29 09:40:29 +00:00
Gabor Juhos	1b3c6ad1fb	generic: fix build failure in MIPS kexec code if SMP is enabled Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35364	2013-01-29 09:40:23 +00:00
John Crispin	756a7c5451	fix for non-blinking LAN LEDs https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359	2013-01-28 18:06:31 +00:00
John Crispin	a0f7a3c214	dont load gptu on ase fixes #12792 SVN-Revision: 35357	2013-01-28 17:46:07 +00:00
John Crispin	d93706154b	ramips: reset switch on single-port devices Signed-off-by: Daniel Gole <dgolle@allnet.de> SVN-Revision: 35356	2013-01-28 17:44:41 +00:00
John Crispin	0de0955931	refresh patches SVN-Revision: 35355	2013-01-28 17:44:20 +00:00
John Crispin	0183df8ed9	Fix ARV7518 USB This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35354	2013-01-28 17:43:35 +00:00
John Crispin	3534757bb9	Add ath9k eeprom and pci fixup support Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35353	2013-01-28 17:43:25 +00:00
John Crispin	5eb43d4cf8	Add support for ARV4518PW R01 and rename R01A. There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35352	2013-01-28 17:42:59 +00:00
Felix Fietkau	1dc9c8ef69	kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed SVN-Revision: 35342	2013-01-27 23:23:39 +00:00
Hauke Mehrtens	68aeb7af8e	brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. SVN-Revision: 35341	2013-01-27 21:48:28 +00:00
Hauke Mehrtens	a9175c90cf	kernel: b53: the b53 spi driver depends on spi SVN-Revision: 35340	2013-01-27 21:39:53 +00:00
Hauke Mehrtens	62554217fc	kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8 SVN-Revision: 35336	2013-01-27 21:18:52 +00:00
Felix Fietkau	8193bbe59a	netfilter: add support for flushing conntrack via /proc SVN-Revision: 35330	2013-01-27 19:02:38 +00:00
Felix Fietkau	156a6e7999	kernel: clean up crypto kconfig options on 3.8 SVN-Revision: 35329	2013-01-27 17:49:09 +00:00
Hauke Mehrtens	721bf97863	kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8 These attributes where removed with kernel 3.8 and are now causing compile errors. SVN-Revision: 35328	2013-01-27 17:48:48 +00:00
Felix Fietkau	ed7ca5d44e	kernel: clean up crypto related kconfig options SVN-Revision: 35327	2013-01-27 17:23:12 +00:00
Felix Fietkau	8a1091ad53	ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma SVN-Revision: 35326	2013-01-27 16:38:27 +00:00
Felix Fietkau	044c316167	kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run Reduces kernel size after LZMA by about 5k on MIPS SVN-Revision: 35325	2013-01-27 16:21:08 +00:00
Hauke Mehrtens	e083c7926b	brcm47xx: create image for Netgear WNDR3400 V1 SVN-Revision: 35323	2013-01-26 20:34:38 +00:00
Hauke Mehrtens	05623aebef	brcm47xx: add initial board detection code SVN-Revision: 35322	2013-01-26 20:34:00 +00:00
Hauke Mehrtens	a83d7bb109	brcm47xx: add gpio to irq function again SVN-Revision: 35321	2013-01-26 20:33:23 +00:00
Felix Fietkau	8933b918cd	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips in combination with kernel symbol export stripping this significantly reduces the kernel image size SVN-Revision: 35320	2013-01-26 16:26:13 +00:00
Gabor Juhos	15be1c9ee7	kernel: update linux 3.7 to 3.7.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35318	2013-01-24 17:08:37 +00:00
Florian Fainelli	680f460861	kernel: refresh 3.8 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35317	2013-01-24 17:04:52 +00:00
Florian Fainelli	9781461a3d	mvebu: update to 3.8-rc4 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35316	2013-01-24 17:04:46 +00:00
Hauke Mehrtens	4a69e20a10	kernel: add missing config options for 3.8 SVN-Revision: 35315	2013-01-24 14:48:15 +00:00
Hauke Mehrtens	76c12ff797	brcm47xx: change generic profiles The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. SVN-Revision: 35314	2013-01-24 14:38:10 +00:00
Felix Fietkau	b60fc82ce5	kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well SVN-Revision: 35310	2013-01-23 16:31:38 +00:00
Felix Fietkau	8ce8960959	ar71xx: sync kernel sizes where possible to fix images for some devices (#12874 ) SVN-Revision: 35309	2013-01-23 16:29:25 +00:00
Jonas Gorski	8411e5c06e	bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307	2013-01-23 10:12:40 +00:00
Jonas Gorski	17d51121a6	bcm63xx: expose the internal switch to b53 Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35306	2013-01-23 10:12:37 +00:00
Jonas Gorski	bb0118c66f	generic: add b53 swconfig switch driver Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35305	2013-01-23 10:12:33 +00:00
Jonas Gorski	3e998d9cf9	bcm63xx: move bcm63xx-spi into the kernel The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35304	2013-01-23 10:12:13 +00:00
Felix Fietkau	46e4246d61	kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore SVN-Revision: 35248	2013-01-19 19:14:37 +00:00
Gabor Juhos	ed6d399f8d	ramips: add profile and build image for the Tenda 3G300M Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246	2013-01-19 17:05:07 +00:00
Gabor Juhos	9891603eb5	ramips: add user-space support for the Tenda 3G300M Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35245	2013-01-19 17:05:06 +00:00
Gabor Juhos	7eff5d2df0	ramips: add kernel support for the Tenda 3G300M Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244	2013-01-19 17:05:03 +00:00
Gabor Juhos	f7a943694f	ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243	2013-01-19 15:36:13 +00:00
Gabor Juhos	6aebe6a65d	ramips: allow to override image name/suffix in GENERIC_{4,8}M macros Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242	2013-01-19 15:36:11 +00:00
Gabor Juhos	60dde219d4	ramips: do not stop the build if some targets fail This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238	2013-01-19 08:51:45 +00:00
Jonas Gorski	c3eeff807f	generic: rtl8366_smi: only assign pvid if no pvid was set yet Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35227	2013-01-18 15:19:11 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Gabor Juhos	0de21d9747	kernel: update linux 3.7 to 3.7.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35216	2013-01-18 11:44:42 +00:00
Florian Fainelli	c8215775f3	mvebu: enable PCI in kernel configuration Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35214	2013-01-17 22:29:26 +00:00
Florian Fainelli	5e45a4344c	mvebu: enable PCIe on Marvell Armada 370 Reference Design Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35213	2013-01-17 22:29:22 +00:00
Florian Fainelli	cf9343ac86	mvebu: enable USB on Armada 370 Reference Design Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35212	2013-01-17 22:29:18 +00:00
Florian Fainelli	7e1e7063c2	mvebu: add preliminary support for PCI express Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35211	2013-01-17 22:29:13 +00:00
Florian Fainelli	29c21b973b	mvebu: refresh patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35210	2013-01-17 22:28:58 +00:00
Florian Fainelli	28acc6588d	kernel: refresh 3.8 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35209	2013-01-17 22:28:53 +00:00
Florian Fainelli	a286a55c6f	mvebu: add board detection scripts Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35208	2013-01-17 22:28:48 +00:00
Florian Fainelli	f7858466e2	mvebu: enable /proc/devicetree usage This is going to be used for proper user-space board identification (ala mcs814x). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35207	2013-01-17 22:28:37 +00:00
Florian Fainelli	15b4681e3e	mvebu: add default profile Such that relevant kernel modules are selected (USB, I2C, SATA, RTC, SDIO) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35206	2013-01-17 22:28:33 +00:00
Jo-Philipp Wich	7399df1d69	x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821 ) SVN-Revision: 35200	2013-01-17 15:46:26 +00:00
Gabor Juhos	57f7408b8a	generic: add EHCI\|OHCI platform driver fix to 3.[36] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35194	2013-01-17 13:54:14 +00:00
Felix Fietkau	576aa2af0c	ramips: enable BR6425N in kernel config Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35191	2013-01-17 09:39:44 +00:00
Florian Fainelli	05466923b8	mvebu: add support for EHCI controller Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35181	2013-01-15 19:55:50 +00:00
Florian Fainelli	c53a347034	mvebu: add support for the Marvell Armada 370 Reference Design board Keep the patches in sync with the upstream developments. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35179	2013-01-15 19:55:40 +00:00
Florian Fainelli	58f8c5d87a	mvebu: enable SMP with SMP on UP enabled The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35178	2013-01-15 19:55:31 +00:00
Florian Fainelli	fa1afc1fa9	mvebu: add support for RTC Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35176	2013-01-15 19:55:19 +00:00
Felix Fietkau	b3b04e9fb1	kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8 SVN-Revision: 35162	2013-01-14 18:55:36 +00:00
Gabor Juhos	78dc69e1d4	generic: remove EHCI platform driver fix from 3.8 It is not needed on 3.8. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35160	2013-01-14 17:53:55 +00:00
Gabor Juhos	b035c594ae	generic: add EHCI\|OHCI platform driver fix from the cns21xx target Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35159	2013-01-14 17:47:23 +00:00
Florian Fainelli	1e103b2ecc	target: enable XZ BCJ decompressor code after r35097 Required to actually be able to mount squashfs xz compressed filesystems. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35156	2013-01-14 16:34:25 +00:00
Felix Fietkau	e0e3509b5c	kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx SVN-Revision: 35154	2013-01-14 16:08:18 +00:00
Felix Fietkau	1474359bd3	ar71xx: fix unaligned access in cls_u32 SVN-Revision: 35132	2013-01-13 16:48:23 +00:00
Felix Fietkau	e67b6ee395	ar71xx: fix unaligned access in a few more places SVN-Revision: 35130	2013-01-13 15:37:58 +00:00
Felix Fietkau	b5bcbdfbb5	ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32 SVN-Revision: 35129	2013-01-13 14:54:39 +00:00
Felix Fietkau	53e0ba49b9	ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed SVN-Revision: 35127	2013-01-13 13:06:09 +00:00
Felix Fietkau	5d55cece6e	kernel: add back the mips module relocation patch SVN-Revision: 35126	2013-01-13 12:23:42 +00:00
Felix Fietkau	764520975c	ar71xx: add more cpu feature overrides, slightly reduces kernel size SVN-Revision: 35125	2013-01-13 11:33:48 +00:00
Felix Fietkau	310724c14d	ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel SVN-Revision: 35124	2013-01-13 11:33:44 +00:00
Hauke Mehrtens	2bf03f971d	brcm47xx: BCMA - Update default IRQ assignment per upstream change Update the default IRQ assignment for unrecognized devices per the upstream change. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35121	2013-01-12 15:00:01 +00:00
Gabor Juhos	5d1ecfc26d	refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35119	2013-01-12 12:29:55 +00:00
Gabor Juhos	ef75e6c71a	malta: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35118	2013-01-12 12:29:53 +00:00
Gabor Juhos	3d057de4db	malta: build lzma and gzip compressed uImages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35117	2013-01-12 12:29:52 +00:00
Gabor Juhos	df8a8f2515	adm5120: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35116	2013-01-12 12:25:42 +00:00
Gabor Juhos	d472567997	adm5120: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35115	2013-01-12 12:25:40 +00:00
Gabor Juhos	eb2188c0e2	ar71xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35114	2013-01-12 12:25:38 +00:00
Gabor Juhos	fe86bc9370	ar71xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35113	2013-01-12 12:25:36 +00:00
Gabor Juhos	ca882f230d	mpc83xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35112	2013-01-12 12:25:34 +00:00
Gabor Juhos	eba037cd1f	mpc83xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35111	2013-01-12 12:25:32 +00:00
Gabor Juhos	ff2ce330a5	ramips: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35110	2013-01-12 12:25:30 +00:00
Gabor Juhos	d53f8c3ded	ramips: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35109	2013-01-12 12:25:28 +00:00
Gabor Juhos	f8f009ca43	rb532: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35108	2013-01-12 12:25:26 +00:00
Gabor Juhos	cd71dcdab7	rb532: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35107	2013-01-12 12:25:24 +00:00
Gabor Juhos	7098354885	ppc44x: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35106	2013-01-12 12:25:21 +00:00
Gabor Juhos	83fccacec2	ppc44x: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35105	2013-01-12 12:25:20 +00:00
Gabor Juhos	9d3bae8f0e	ppc40x: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35104	2013-01-12 12:25:18 +00:00
Gabor Juhos	06fea75afb	ppc40x: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35103	2013-01-12 12:25:16 +00:00
Gabor Juhos	a51f602494	cns21xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35102	2013-01-12 12:25:14 +00:00
Gabor Juhos	bdc6ec4974	cns21xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35101	2013-01-12 12:25:12 +00:00
Gabor Juhos	c19c30cefd	kernel: update linux 3.7 to 3.7.2 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35100	2013-01-12 11:43:08 +00:00
Florian Fainelli	ecf230710f	mvebu: update to 3.8-rc3 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35086	2013-01-10 17:20:25 +00:00
Hauke Mehrtens	548cb59826	brcm47xx: update bgmac driver to the version in mainline kernel SVN-Revision: 35083	2013-01-10 14:22:19 +00:00
Hauke Mehrtens	885eea1842	kernel: update bcma and ssb to master-2013-01-09 from wireless-testing SVN-Revision: 35080	2013-01-10 14:05:18 +00:00
Imre Kaloz	a2950fabd4	clean up PCI bus topology This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35079	2013-01-10 13:25:12 +00:00
Imre Kaloz	b63b970866	clean up PCI bus topology This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35078	2013-01-10 13:23:33 +00:00
John Crispin	64910f4490	fixes USB reset on ARV7518 SVN-Revision: 35077	2013-01-10 06:44:58 +00:00
John Crispin	4834d09a3f	fixes none-pci build SVN-Revision: 35062	2013-01-09 09:04:09 +00:00
Florian Fainelli	25475a095e	mvebu: add inital support for Marvell Armada XP/370 SoCs This brings in the initial support for the Marvell Armada XP/370 SoCs. Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following interfaces: - Ethernet - SDIO - GPIOs - SATA Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35058	2013-01-08 22:20:16 +00:00
Florian Fainelli	97acd10458	add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35057	2013-01-08 22:20:11 +00:00
Florian Fainelli	9b601b79d0	add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35056	2013-01-08 22:20:06 +00:00
Florian Fainelli	8dbed04ec9	kernel: add support for 3.8-rc2 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35055	2013-01-08 22:19:31 +00:00
Hauke Mehrtens	7b0af8193b	brcm47xx: BGMAC Driver corrections 1) Fix what appears to be a logic error in bgmac_phy_advertise. 2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo interface w/ the driver to work correctly. I still have the issue with the interface always being HD when the speed/duplex is set manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35052	2013-01-07 22:51:39 +00:00
Florian Fainelli	4ec57bdc06	update to 3.7 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35045	2013-01-07 18:16:36 +00:00
Gabor Juhos	ba4de984b9	ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards The PHY_SWAP and PHY_ADDR_SWAP bits are initialized differently by different versions of the bootloader. This leads to broken ethernet connection with OpenWrt on some boards. Turn both SWAP bits OFF on these boards to make it consistent regardless of the bootloader used. Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35037	2013-01-07 14:30:37 +00:00
Gabor Juhos	251e4608b0	ar71xx: add missing Makefile entry to the 74HC153 GPIO patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35035	2013-01-07 14:14:41 +00:00
Felix Fietkau	5154270694	orion: debloat the kernel some more SVN-Revision: 35023	2013-01-06 15:09:47 +00:00
Felix Fietkau	75657ff8a9	kernel: add missing config symbol SVN-Revision: 35021	2013-01-06 15:09:39 +00:00
John Crispin	f2f9332350	adds support for Edimax BR-6524N fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020	2013-01-06 11:11:42 +00:00
John Crispin	d5d2e8b4db	missing underscore in 3.3 regmap patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35018	2013-01-06 10:01:53 +00:00
Felix Fietkau	2e8409cce3	kernel: port the regmap fix to 3.6 (#12749 ), refresh patches for other versions SVN-Revision: 35016	2013-01-05 13:33:44 +00:00
John Crispin	e6aac19237	fix regmap debloat patch SVN-Revision: 35015	2013-01-05 00:20:05 +00:00
Jonas Gorski	e952eaa112	bcm63xx: Add Huawei HG556a support Add Huawei EchoLife HG556a support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: added some code style fixes] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35011	2013-01-04 14:47:57 +00:00
Jonas Gorski	0e58173fa5	bcm63xx: Fix caldata partition mtd patch Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash. Tested-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 35010	2013-01-04 14:47:50 +00:00
Jonas Gorski	10fc07daac	bcm63xx: remove 3.3 support 3.6 is tested enough to be considered stable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35009	2013-01-04 14:47:43 +00:00
Felix Fietkau	96f3911981	kernel: move regmap bloat out of the kernel image if it is only being used in modules SVN-Revision: 34999	2013-01-03 18:39:50 +00:00
Hauke Mehrtens	a105eea1a1	brcm47xx: various fixes and code cleanups for irq code This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34997	2013-01-03 16:56:54 +00:00
Hauke Mehrtens	4443997fd8	brcm47xx: add bgmac driver This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995	2013-01-03 02:05:22 +00:00
Hauke Mehrtens	8f6bdcffa1	brcm47xx: build b44 as a module SVN-Revision: 34994	2013-01-03 02:00:25 +00:00
Hauke Mehrtens	22d62d311a	brcm47xx: run ifup before starting the switch In addition check_module is not needed, nobody checks the return value. SVN-Revision: 34993	2013-01-03 01:59:43 +00:00
Hauke Mehrtens	97b2b601c7	brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are ignored when setting the interrupt masks. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34990	2013-01-03 01:56:13 +00:00
Hauke Mehrtens	f74e847301	brcm47xx: improve IRQ handling for bcma based devices This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34989	2013-01-03 01:55:34 +00:00
Hauke Mehrtens	25afeba608	brcm47xx: add a new version of the nvram rewrite patch This is the version like it was send for mainline inclusion. SVN-Revision: 34988	2013-01-03 01:53:30 +00:00
Hauke Mehrtens	edc7ab525f	brcm47xx: move patches already in the mainline kernel to the front SVN-Revision: 34987	2013-01-03 01:51:31 +00:00
Hauke Mehrtens	76c767f122	brcm47xx: remove support for kernel version 3.3 SVN-Revision: 34986	2013-01-03 01:48:43 +00:00
Jo-Philipp Wich	7a73c2f91f	generic: add some missing kernel config symbols spotted on x86 SVN-Revision: 34981	2013-01-02 19:10:24 +00:00
Felix Fietkau	741f6ba7ef	x86: fix typo in alix2/net5501 default packages SVN-Revision: 34972	2013-01-02 16:09:23 +00:00
John Crispin	569bbe4970	rt5350 switch support fix RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969	2013-01-02 11:28:21 +00:00
Gabor Juhos	373b0b9ad1	generic: fix UBIFS build error if XZ compression is disabled Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34959	2013-01-02 08:53:07 +00:00
Gabor Juhos	d91117459c	adm5120: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34954	2013-01-01 13:15:49 +00:00
Gabor Juhos	f0520f1714	adm5120: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34953	2013-01-01 13:15:44 +00:00
Gabor Juhos	b4315df8e1	adm5120: switch to 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34952	2013-01-01 13:15:41 +00:00
Gabor Juhos	edd36342e5	adm5120: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34951	2013-01-01 13:15:36 +00:00
Gabor Juhos	92cd48e9ea	adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c Also add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34950	2013-01-01 13:15:30 +00:00
Gabor Juhos	03e09078dc	adm5120: use mtd_read helper in trxsplit.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34949	2013-01-01 13:15:20 +00:00
Gabor Juhos	e1b13e15b2	adm5120: don't include asm/system.h in adm5120-hcd.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34948	2013-01-01 13:15:16 +00:00
Gabor Juhos	cbe5d664e1	generic: add missing symbol for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34947	2013-01-01 13:15:11 +00:00
Gabor Juhos	e1965a1d1a	ar71xx: register the NAND flash controller device on the AP135/136 boards Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34946	2013-01-01 13:10:41 +00:00
Gabor Juhos	66efec6783	ar71xx: allow to register the NAND flash controller on the QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34945	2013-01-01 13:10:36 +00:00
Gabor Juhos	2c77e5d7b3	ar71xxx: allow to select ATH79_DEV_NFC for QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34944	2013-01-01 13:10:34 +00:00
Gabor Juhos	d8446d65fe	ar71xxx: allow to build the ar934x_nfc driver for QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34943	2013-01-01 13:10:29 +00:00
Gabor Juhos	93c322cacc	ar71xx: fix NAND controller base for QCA955x SoCs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34942	2013-01-01 13:10:26 +00:00
Gabor Juhos	b57cc9a538	ar71xx: fold AP135 patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34941	2013-01-01 13:10:22 +00:00
John Crispin	624eb36fff	adds missing symbol SVN-Revision: 34939	2012-12-30 21:31:10 +00:00
John Crispin	ce57efa3ea	fixes usb port on arv 4518 SVN-Revision: 34935	2012-12-30 12:38:40 +00:00
Gabor Juhos	fb07876f25	ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934	2012-12-30 08:23:48 +00:00
Gabor Juhos	6708d68c24	ramips: build firmware image for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927	2012-12-29 17:50:40 +00:00
Gabor Juhos	8b1ac2ae37	ramips: add user-space support for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34926	2012-12-29 17:50:38 +00:00
Gabor Juhos	d6d06aceb0	ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925	2012-12-29 17:50:35 +00:00
Gabor Juhos	76537041eb	ramips: build image for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34924	2012-12-29 17:50:34 +00:00
Gabor Juhos	3aad9b4c9b	ramips: add user-space support for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34923	2012-12-29 17:50:32 +00:00
Gabor Juhos	3fcb8bb0dd	ramips: rt305x: add kernel support for AirLive AIR3GII AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922	2012-12-29 17:50:28 +00:00
Gabor Juhos	87271e9f28	ar71xx: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34920	2012-12-29 16:02:31 +00:00
Gabor Juhos	a3a6e0f039	ar71xx: Build the AP135 images Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34919	2012-12-29 16:02:28 +00:00
Gabor Juhos	dddf05bde2	ar71xx: Add userspace support for AP135 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34918	2012-12-29 16:02:27 +00:00
Gabor Juhos	1a379c5112	ar71xx: Add support for AP135 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34917	2012-12-29 16:02:24 +00:00
Gabor Juhos	c6580f64b8	ar71xx: use a backported patch to fix AR933x UART baud rate calculation Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34915	2012-12-29 13:52:38 +00:00
Felix Fietkau	348dc70c8c	ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size SVN-Revision: 34912	2012-12-28 21:30:24 +00:00
Felix Fietkau	41a039f464	mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration SVN-Revision: 34909	2012-12-28 19:17:19 +00:00
Felix Fietkau	9bb8b9fadb	kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes SVN-Revision: 34901	2012-12-27 22:59:51 +00:00
Hauke Mehrtens	981b7410f8	brcm47xx: bcma: correct M25P32 serial flash ID Thank you Rafał Miłecki. SVN-Revision: 34900	2012-12-27 19:18:40 +00:00
Gabor Juhos	386c37b4c2	mpc83xx: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34892	2012-12-26 10:40:54 +00:00
Gabor Juhos	f67a7a479e	mpc83xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34891	2012-12-26 10:40:51 +00:00
Gabor Juhos	36af140fe4	mpc83xx: switch to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34890	2012-12-26 10:40:50 +00:00
Gabor Juhos	c4c8307ca1	mpc83xx: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34889	2012-12-26 10:40:48 +00:00
Gabor Juhos	e537b8a093	mpc83xx: create package for the rbppc_cf module Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34888	2012-12-26 10:40:47 +00:00
Gabor Juhos	fff75fe5b6	generic: more missing symbols for 3.{6,7} Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34887	2012-12-26 10:40:41 +00:00
Gabor Juhos	f5b1cba606	ar71xx: build image for the AP136-020 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34886	2012-12-26 09:50:37 +00:00
Gabor Juhos	f3f05d86fe	ar71xx: add user-space support for AP136-020 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34885	2012-12-26 09:50:36 +00:00
Gabor Juhos	ed1889db33	ar71xx: add kernel support for the AP136-020 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34884	2012-12-26 09:50:34 +00:00
Gabor Juhos	c887a7fe4e	ar71xx: rename AP136 to AP136-010 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34883	2012-12-26 09:50:31 +00:00
Gabor Juhos	f8b4dfd172	ar71xx: dynamically set AR8327's PAD configuration on AP136 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34882	2012-12-25 18:45:32 +00:00
Gabor Juhos	d4b4c7d102	generic: ar8216: add sgmii_delay_en field to ar8327_platform_data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34881	2012-12-25 18:45:31 +00:00
Gabor Juhos	1dc2b6e8fa	ar71xx: ag71xx: show PHY interface mode in dmesg Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34880	2012-12-25 18:45:29 +00:00
Gabor Juhos	69da894432	ramips: fix ASUS WL-330N3G MAC address The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34877	2012-12-24 06:52:41 +00:00
Gabor Juhos	c5a36f13f0	ramips: fix wifi EEPROM extraction on DIR-615-Dx models Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34876	2012-12-24 06:52:38 +00:00
Imre Kaloz	2c05915b24	add nol2x0 cmdline to disable l2x0 cache L2 cache via L2X0 cache controller available on some ARM boards can provide a performance boost in some situations but decrease performance in others. This adds a kernel cmdline to disable L2X0 for cns3xxx based boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34874	2012-12-23 18:53:38 +00:00
Gabor Juhos	c3cb63661f	generic: ar8216: don't use 0 as default VID on AR8327 VID0 is reserved for priority-tagged packets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34862	2012-12-22 18:30:04 +00:00
Gabor Juhos	fa9d06c7f4	generic: more missing symbols for 3.{6,7} Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34861	2012-12-22 17:22:41 +00:00
Gabor Juhos	8105c6badd	ramips: unify eeprom file name for the built-in wireless MAC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34860	2012-12-22 16:09:03 +00:00
Gabor Juhos	c81b4475c9	ramips: rt3883: fix build error The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34859	2012-12-22 13:50:47 +00:00
Gabor Juhos	64d31e6c6b	ar71xx: register the second ethernet interface on the AP136 Also fix the default network configuration according to the new setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34854	2012-12-22 12:12:50 +00:00
Gabor Juhos	5dec87afef	ar71xx: fix ethernet device registration for QCA9558 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34853	2012-12-22 12:12:48 +00:00
Gabor Juhos	84a7051cef	ar71xx: rename QCA9558 ETH_CFG bit defines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34852	2012-12-22 12:12:46 +00:00
Gabor Juhos	4085a5773d	ar71xx: fixup allowed PHY interface types for QCA9558 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34851	2012-12-22 12:12:44 +00:00
Gabor Juhos	f01a786825	ar71xx: don't assign any MII bus device on QCA9558 by default Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34850	2012-12-22 12:12:43 +00:00
Gabor Juhos	9edcd9d3a3	ar71xx: ag71xx: fix mii_bus_dev sanity check The mii_bus device is not required if phy_mask is zero. The driver will use a fixed connection if it is not specified. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34849	2012-12-22 12:12:41 +00:00
Gabor Juhos	ad0f03d250	ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev Trying to do that causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4 Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000000 00000001 $ 4 : 00000000 802e6390 ffff8f45 00000001 $ 8 : 804b5360 ffffff80 802f93bc 00000000 $12 : 802f93e8 00000000 00000000 00000000 $16 : 8381aba0 8381aba0 00000000 00000000 $20 : 8295eff0 00000032 80000000 004101b8 $24 : 00000000 777265b0 $28 : 82936000 82937cf0 00420000 801d18d4 Hi : 00000000 Lo : 00000001 epc : 801d170c ar7240sw_reset+0x1c/0x19c Tainted: G O ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0 Status: 1100fc03 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button _hotplug(O) Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750) Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000 8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0 8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c 8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c 8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348 ... Call Trace: [<801d170c>] ar7240sw_reset+0x1c/0x19c [<801d18d4>] ag71xx_ar7240_start+0x28/0xc0 [<801cf900>] ag71xx_open+0x1d0/0x258 [<801ec08c>] __dev_open+0xcc/0x130 [<801ec348>] __dev_change_flags+0xc0/0x160 [<801ec490>] dev_change_flags+0x20/0x6c [<801ec5c8>] dev_ifsioc+0xec/0x348 [<801ecdb8>] dev_ioctl+0x594/0x67c [<800ec00c>] do_vfs_ioctl+0x598/0x5ec [<800ec0b0>] sys_ioctl+0x50/0x90 [<8006a3c4>] stack_done+0x20/0x40 Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34848	2012-12-22 12:12:40 +00:00
Gabor Juhos	3931c9524c	generic: ar8316: allow to configure port 6 via platform data on AR8327 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34847	2012-12-22 12:12:37 +00:00
Gabor Juhos	a0b31f97bb	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846	2012-12-22 12:12:35 +00:00
Gabor Juhos	b44cdcde8e	ramips: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34845	2012-12-22 12:11:13 +00:00
Gabor Juhos	b81667cb23	ramips: convert to use {e,o}hci-platform driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34843	2012-12-22 12:11:08 +00:00
Gabor Juhos	c0e1a6f342	generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers Backport of upstream commits: 86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe 04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34842	2012-12-22 12:11:06 +00:00
John Crispin	efe3225e2b	ar9 did not load atm driver properly SVN-Revision: 34840	2012-12-22 10:16:52 +00:00
John Crispin	379cd6e25e	dont use input layer for gpio buttons SVN-Revision: 34839	2012-12-21 20:04:20 +00:00
John Crispin	90a3761b0b	default switch setup for WBMR SVN-Revision: 34838	2012-12-21 20:04:12 +00:00
John Crispin	ae0b9ff1ce	Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143 ) Tested only on the wbmr-hp-g300h, could affect/break other devices. Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at> SVN-Revision: 34837	2012-12-21 20:04:04 +00:00
John Crispin	9818a1f00b	adds script to set wps info on boards with a wps button SVN-Revision: 34836	2012-12-21 20:03:59 +00:00
John Crispin	3134205dfd	minor tweaks to WBMR image SVN-Revision: 34835	2012-12-21 20:03:54 +00:00
John Crispin	f4b2439554	add missing PHY_BASIC_FEATURES to 100mbit phys SVN-Revision: 34826	2012-12-21 14:41:35 +00:00
John Crispin	861bf6af49	fix typo inside fritz3370 devicetree file SVN-Revision: 34825	2012-12-21 14:41:30 +00:00
John Crispin	54c096527a	more devicetree fixes SVN-Revision: 34824	2012-12-21 13:47:55 +00:00
John Crispin	59cc6d9ddd	improve button handling SVN-Revision: 34823	2012-12-21 13:47:50 +00:00
John Crispin	7ce4c81647	add phy-reset gpio handling to xrx200-net SVN-Revision: 34822	2012-12-21 13:47:44 +00:00
John Crispin	42d668174e	add more lantiq phy ids based on daniels uboot code SVN-Revision: 34821	2012-12-21 13:47:40 +00:00
John Crispin	16c5946f8b	refresh patch and install v1.1 gphy blobs SVN-Revision: 34820	2012-12-21 13:47:35 +00:00
John Crispin	123343d424	make to rtl8366_smi of binding use gpio_is_valid SVN-Revision: 34816	2012-12-21 13:47:14 +00:00
Gabor Juhos	840d0d246c	kernel: add solos-pci update for 3.3 Same patches that I just merged for 3.6 and 3.7, except with one additional fix that went into v3.4 that needed to be included. Submitted more for the benefit of the AA branch than for trunk. [juhosg: refresh the patch with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34813	2012-12-21 10:38:33 +00:00
Gabor Juhos	04ce7e213f	rb532: add support for 3.7 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34812	2012-12-20 19:25:43 +00:00
Gabor Juhos	e1b5eeeaa4	ramips: Add USB support for DAP-1350 platform. It seems to work as intended, but only lightly tested. Patch-by: Bryan Steele <brynet@gmail.com> SIgned-off-by: Gabor Juhos <juhsog@openwrt.org> SVN-Revision: 34811	2012-12-20 19:17:17 +00:00
Gabor Juhos	311d921e12	rb532: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34810	2012-12-20 19:09:03 +00:00
Gabor Juhos	befb29c7a3	rb532: switch to 3.6.11 Compile tested only. The target is broken anyway, so the kernel version does not matter too much. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34809	2012-12-20 19:09:01 +00:00
Gabor Juhos	dbcb4708fb	rb532: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34808	2012-12-20 19:09:00 +00:00
Gabor Juhos	5399d00ae6	ppc44x: add support for 3.7 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34807	2012-12-20 18:11:22 +00:00
Gabor Juhos	2d6a41cf5d	kernel: add solos-pci patches from 3.8 for new hardware [juhosg: refresh patches with quilt, skip the patch for 3.3] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34806	2012-12-20 17:14:57 +00:00
Gabor Juhos	d21275a36b	linux: add missing symbols for 3.{6,7} Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34805	2012-12-20 17:14:56 +00:00
Gabor Juhos	a81fa11243	cns21xx: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34801	2012-12-20 14:51:17 +00:00
Gabor Juhos	1d7ba088e6	ppc40x: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34800	2012-12-20 14:51:16 +00:00
Gabor Juhos	708c8c3d0d	ppc40x: add missing NULL terminator to avoid boot panic on PPC40x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34799	2012-12-20 14:37:39 +00:00
Gabor Juhos	e108cb91c0	ar71xx: rename fix-ar933x-reset patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34798	2012-12-20 14:13:16 +00:00
Gabor Juhos	5da1d7daa5	ppc40x/44x: disable SWIOTLB Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34797	2012-12-20 14:09:39 +00:00
John Crispin	1b0aaff246	adds a fix for ar8216 mii detection on etop driver SVN-Revision: 34795	2012-12-19 16:20:24 +00:00
Mirko Vogt	4d4b2d3ced	merge /lib/functions/boot.sh and /lib/functions.sh SVN-Revision: 34794	2012-12-19 16:07:53 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Mirko Vogt	439a869090	Do not overload mount-call - trying to reduce confusion The behaviour of calling 'mount' differed depending on whether it called the busybox-mount, the mount of util-linux, the mount defined in /lib/functions.sh and /lib/functions/boot.sh /etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh, both re-defining 'mount'. SVN-Revision: 34792	2012-12-19 16:07:46 +00:00
John Crispin	687920ba3e	minor basefiles fixes SVN-Revision: 34790	2012-12-19 15:17:42 +00:00
John Crispin	e472671bde	fix gptu clocks SVN-Revision: 34789	2012-12-19 15:17:31 +00:00
John Crispin	5495ffbfdf	more board file fixes SVN-Revision: 34788	2012-12-19 15:17:11 +00:00
Gabor Juhos	c0515a5a8b	ppc44x: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34787	2012-12-19 09:45:43 +00:00
Gabor Juhos	aedd9433fa	ppc44x: switch to 3.6.11 Compile tested only. The target is broken anyway, so the kernel version does not matter too much. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34786	2012-12-19 09:45:42 +00:00
Gabor Juhos	982d3e3f7a	ppc44x: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34785	2012-12-19 09:45:40 +00:00
Gabor Juhos	5f82aa4d15	ar71xx: merge machine patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34783	2012-12-19 08:50:45 +00:00
Gabor Juhos	cf99770800	ar71xx: build image for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: reorder MR3220 MultiProfile entry] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34782	2012-12-19 08:50:44 +00:00
Gabor Juhos	b1b7aa674e	ar71xx: add user-space support for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: add uci-defaults/network support] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34780	2012-12-19 08:50:41 +00:00
Gabor Juhos	0767605d17	ar71xx: add kernel support for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: - remove custom LED and button arrays - use separate machine specific patch - update Kconfig] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34779	2012-12-19 08:50:35 +00:00
John Crispin	4aa8272c8b	fix gptu patch - tapi should now load SVN-Revision: 34777	2012-12-18 20:12:57 +00:00
Gabor Juhos	c62586382a	ppc40x: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34776	2012-12-18 20:10:37 +00:00
Gabor Juhos	7d0cf4f7a0	ppc40x: switch to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34775	2012-12-18 20:10:34 +00:00
Gabor Juhos	565cdf58b5	ppc40x: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34774	2012-12-18 20:10:31 +00:00
Gabor Juhos	2143de1a3d	generic: disable crashlog on ppc It causes panic on boot: [ 0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs [ 0.200902] Unable to handle kernel paging request for data at address 0x00000000 [ 0.208347] Faulting instruction address: 0xc026cb10 [ 0.213282] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.218586] PowerPC 40x Platform [ 0.221783] Modules linked in: [ 0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8 [ 0.229745] REGS: c1825ed0 TRAP: 0300 Not tainted (3.6.11) [ 0.235435] MSR: 00029030 <EE,ME,IR,DR> CR: 42004082 XER: 00000000 [ 0.241745] DEAR: 00000000, ESR: 00000000 [ 0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000 GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69 GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8 GPR16: 00000001 ffffffff 00000000 007fff00 `01ff6120` 01f94298 01fff258 c02631b8 GPR24: c02604bc 00000019 c02a0000 c02a0000 c027c644 00000000 c02c0000 c02bd388 [ 0.279089] NIP [c026cb10] crashlog_init_fs+0x30/0xe0 [ 0.284095] LR [c026cb10] crashlog_init_fs+0x30/0xe0 [ 0.289000] Call Trace: [ 0.291442] [c1825f80] [c026cb10] crashlog_init_fs+0x30/0xe0 (unreliable) [ 0.298185] [c1825f90] [c00023fc] do_one_initcall+0xdc/0x1c8 [ 0.303812] [c1825fc0] [c02638c4] kernel_init+0x110/0x1a4 [ 0.309154] [c1825ff0] [c000ad4c] kernel_thread+0x4c/0x68 [ 0.314488] Instruction dump: [ 0.317429] 9421fff0 7c0802a6 bfc10008 3fc0c02c 90010014 3bfed388 3800fff4 807f0004 [ 0.325117] 2f830000 41be00a4 38804000 4bda2809 <81630000> 7c691b78 907ed388 6d605e11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34773	2012-12-18 20:10:02 +00:00
Gabor Juhos	1e8ab43834	generic: add missing symbols for 3.{6,7} Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34772	2012-12-18 20:09:58 +00:00
John Crispin	af48676b28	update to 3.7.1 SVN-Revision: 34771	2012-12-18 19:32:01 +00:00
Gabor Juhos	1080f68b2b	etrax: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34768	2012-12-18 17:54:04 +00:00
Gabor Juhos	b86e82e5cc	s3c2442: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34767	2012-12-18 17:54:02 +00:00
Gabor Juhos	db831511d2	goldfish: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34766	2012-12-18 17:53:53 +00:00
Gabor Juhos	979bc5536d	ps3: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34765	2012-12-18 17:53:51 +00:00
Gabor Juhos	6f794eeedb	pxcab: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34764	2012-12-18 17:53:17 +00:00
Gabor Juhos	029553b698	refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34763	2012-12-18 15:54:15 +00:00
Gabor Juhos	7ff7340304	geos: add missing config-3.7 file Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34762	2012-12-18 15:51:45 +00:00
Gabor Juhos	149534f3ed	ar71xx: image: add OpenMesh profile It allows to build firmware images for all OpenMesh products in one step. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34761	2012-12-18 15:16:05 +00:00
Gabor Juhos	8903f8581b	kernel: update linux 3.7 to 3.7.1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34760	2012-12-18 15:13:31 +00:00
Gabor Juhos	b2caa5db24	cns21xx: remove broken flag Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34759	2012-12-18 14:51:58 +00:00
Gabor Juhos	39796c434c	cns21xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34758	2012-12-18 14:51:58 +00:00
Gabor Juhos	991ebc29d7	cns21xx: switch to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34757	2012-12-18 14:51:57 +00:00
Gabor Juhos	9e1a54296a	cns21xx: fix build errors on 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34756	2012-12-18 14:51:55 +00:00
Gabor Juhos	5a680f1cbf	geos: update to 3.7 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34755	2012-12-18 14:50:48 +00:00
Gabor Juhos	9b15d3e22a	kernel: add 3.7 support for x86 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34754	2012-12-18 14:50:47 +00:00
Gabor Juhos	d537f76ddd	kernel: Fix Cisco SIP NAT patch to build with 3.7 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34753	2012-12-18 14:50:45 +00:00
Gabor Juhos	0c64d55b14	kernel: add missing config option BATTERY_DS2781 for 3.7 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34749	2012-12-18 14:50:41 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	fe8efb72ca	ramips: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34744	2012-12-17 22:28:11 +00:00
Gabor Juhos	fc0da6852e	ar71xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34743	2012-12-17 22:28:09 +00:00
Felix Fietkau	1bdea42662	kernel: fix a warning in the O_DIRECT debloat patch SVN-Revision: 34740	2012-12-17 20:55:49 +00:00
Felix Fietkau	2bda7a5b41	kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS SVN-Revision: 34737	2012-12-17 15:11:39 +00:00
Gabor Juhos	d153bdbba9	generic: rtl836x: fix compiler warnings CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366s.c:16:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe': drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366rb.c:17:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe': drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8367.o In file included from drivers/net/phy/rtl8367.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367.c: In function 'rtl8367_probe': drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable] CC drivers/net/phy/rtl8367b.o In file included from drivers/net/phy/rtl8367b.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe': drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34731	2012-12-17 13:02:18 +00:00
Gabor Juhos	61d715505c	ar71xx: add profile and build image for UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34730	2012-12-17 12:28:21 +00:00
Gabor Juhos	abbd18776e	ar71xx: add user-space support for UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34728	2012-12-17 12:28:11 +00:00
Gabor Juhos	ff3f28265f	ar71xx: add kernel support for the UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34727	2012-12-17 12:28:02 +00:00
John Crispin	7bcb6b5479	make pinctrl-falcon honour status="disbaled"; SVN-Revision: 34714	2012-12-16 10:03:28 +00:00
John Crispin	573cf13419	fix falcon profile SVN-Revision: 34713	2012-12-16 10:03:23 +00:00
John Crispin	33d3433d75	fix i2c-lantiq module SVN-Revision: 34712	2012-12-16 10:03:18 +00:00
John Crispin	b637eb598d	add falcon devicetree files SVN-Revision: 34711	2012-12-16 10:03:11 +00:00
Felix Fietkau	8c3306b8b6	kernel: add a missing config symbol for 3.7 SVN-Revision: 34710	2012-12-15 22:00:03 +00:00
Jonas Gorski	eba8cccd88	linux: generic: rtl836: fix compilation with !CONFIG_OF fixes the following errors caused by r34682: CC [M] drivers/net/phy/rtl8366_smi.o In file included from drivers/net/phy/rtl8366_smi.c:26:0: drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat': drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe': drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node ' but argument is of type 'struct platform_device ' drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device ' but argument is of type 'struct platform_device ' drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here make[7]: [drivers/net/phy/rtl8366_smi.o] Error 1 make[6]: * [drivers/net/phy] Error 2 make[5]: * [drivers/net] Error 2 make[4]: * [drivers] Error 2 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34703	2012-12-15 13:32:02 +00:00
John Crispin	3ca51b5399	select hcd as a default package for the dgn3500 SVN-Revision: 34702	2012-12-15 11:01:16 +00:00
John Crispin	85e4da7e23	EASY80920 has 2 usb ports SVN-Revision: 34701	2012-12-15 11:01:11 +00:00
John Crispin	3dac521a49	remove 3.3 and 3.6 SVN-Revision: 34699	2012-12-15 02:01:08 +00:00
John Crispin	1dece11487	cleanup basefiles SVN-Revision: 34698	2012-12-15 02:01:00 +00:00
John Crispin	601bc28669	clean up modules.mk SVN-Revision: 34697	2012-12-15 02:00:55 +00:00
John Crispin	2c33df0376	add devicetrees SVN-Revision: 34691	2012-12-15 02:00:20 +00:00
John Crispin	3a948770cf	add linux-v3.7 SVN-Revision: 34687	2012-12-15 01:59:45 +00:00
John Crispin	d8678644f9	make rtl8366 driver OF capable SVN-Revision: 34682	2012-12-15 01:59:08 +00:00
Hauke Mehrtens	4901ac8225	brcm47xx: improve suppressing printing if a module was found in preinit function. Thank you Bastian Bittorf SVN-Revision: 34680	2012-12-14 22:45:12 +00:00
Gabor Juhos	57d7df3a35	generic: export include/linux/switch.h on 3.3, 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34678	2012-12-14 12:11:48 +00:00
Gabor Juhos	a860153cce	generic: disintegrate UAPI from include/linux/switch.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34677	2012-12-14 12:11:41 +00:00
Gabor Juhos	8aed692309	generic: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34676	2012-12-14 08:47:39 +00:00
Gabor Juhos	272ef8ac00	generic: update pci_disable_usb_common_quirks patch Fixes the following compiler warning: drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34675	2012-12-14 08:32:56 +00:00
Gabor Juhos	2e2c88b625	ar71xx: reorder some patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34674	2012-12-14 07:16:56 +00:00
Gabor Juhos	34411a0cbd	ar71xx: merge unifi outdoor patch into the ubnt-xm one Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34673	2012-12-14 07:16:50 +00:00
Hauke Mehrtens	6c8efbfdc0	brcm47xx: Additional BCM4716 support Additional BCM4716 support. Still needs working ethernet driver. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34672	2012-12-13 18:57:38 +00:00
Hauke Mehrtens	6672d869da	brcm47xx: BCMA - Broadcom 2011 SDK Updates I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't noticed any obvious changes in behavior with them applied; but thought I should at least pass them on. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34670	2012-12-13 18:54:04 +00:00
Hauke Mehrtens	97d22306da	brcm47xx: return the real irq number in bcma_core_irq The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34669	2012-12-13 18:51:10 +00:00
Gabor Juhos	6e4082f170	kernel: fix solos-pci skb double-free in DMA mode [juhosg: refresh the patches with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34667	2012-12-13 18:39:31 +00:00
Florian Fainelli	321852348f	kernel: fix perf build with uclibc toolchains on x86 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34666	2012-12-13 17:34:22 +00:00
Florian Fainelli	5e7d69554e	kernel/3.6: backport an upstream build for perf with uClibc Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34662	2012-12-13 15:40:27 +00:00
Felix Fietkau	2bb7f82d8a	kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes SVN-Revision: 34657	2012-12-13 13:07:13 +00:00
Hauke Mehrtens	71712ec522	brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way. SVN-Revision: 34655	2012-12-13 00:12:42 +00:00
Hauke Mehrtens	5be97468f6	brcm47xx: use kernel 3.6.10 by default now SVN-Revision: 34654	2012-12-13 00:11:55 +00:00
Hauke Mehrtens	235c065e12	brcm47xx: suppress printing if a module was found in preinit function. SVN-Revision: 34653	2012-12-13 00:11:11 +00:00
Hauke Mehrtens	3a4a6cfd64	kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko SVN-Revision: 34652	2012-12-13 00:09:55 +00:00
Hauke Mehrtens	1bd8db0bd6	kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing SVN-Revision: 34651	2012-12-12 22:42:18 +00:00
Gabor Juhos	d085aad288	ar71xx: add profile and build initramfs image for the WNDR4300 It is not yet possible to use the default squasfsh/jffs2 images on NAND flashes, so only initramfs image is supported for now. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34650	2012-12-12 16:49:52 +00:00
Gabor Juhos	dcdfcb75f0	ar71xx: add user-space support for the NETGEAR WNDR4300 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34649	2012-12-12 16:49:51 +00:00
Gabor Juhos	bc82db7d78	ar71xx: add kernel support for the NETGEAR WNDR4300 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34647	2012-12-12 16:49:49 +00:00
Gabor Juhos	75b71f4a74	ar71xx: add ap91_pci_init_simple helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34646	2012-12-12 16:49:48 +00:00
Gabor Juhos	d7cebac243	ar71xx: add ath79_wmac_register_simple helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34645	2012-12-12 16:49:47 +00:00
Gabor Juhos	ec26814b0e	ar71xx: refresh 3.3 patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34644	2012-12-12 16:49:46 +00:00
Gabor Juhos	cdfc300948	ar71xx: remove superfluous USB patches for 3.3 SVN-Revision: 34643	2012-12-12 16:49:43 +00:00
Gabor Juhos	eece71be56	generic: fix 8139cp patch for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34640	2012-12-12 08:37:27 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
Florian Fainelli	ed15c452a1	kernel: update to 3.7 final Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34626	2012-12-11 11:31:17 +00:00
Florian Fainelli	aa2dc106c6	switch to 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34623	2012-12-10 21:06:10 +00:00
Florian Fainelli	ff6116cbdf	add 3.6 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34622	2012-12-10 21:06:05 +00:00
Florian Fainelli	17c76e5ca8	add sound feature Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34621	2012-12-10 21:05:48 +00:00
Florian Fainelli	cbfca35c76	generic: backport a fix for the input keymap-matrix module Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34620	2012-12-10 21:05:42 +00:00
Florian Fainelli	87c8808ca5	keyboard driver depends on input-matrixkmap for 3.6+ Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34619	2012-12-10 21:05:36 +00:00
Florian Fainelli	5c28c5255f	generic: backport an upstream fix for building snd-soc-pcm as a module Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34617	2012-12-10 21:05:27 +00:00
Florian Fainelli	f016b935d3	also list kmod-sound-core in the default packages Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34615	2012-12-10 21:05:11 +00:00
Gabor Juhos	dfd718d13d	mac80211: ath9k: allow to load EEPROM data via firmware API Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34606	2012-12-10 15:46:15 +00:00
Florian Fainelli	374a72411a	generic/kernel: add a fix for a common MIPS build failure. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34602	2012-12-10 15:04:10 +00:00
Florian Fainelli	c1c6a23f13	kernel/generic: refresh 3.7 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34601	2012-12-10 15:03:55 +00:00
Florian Fainelli	0f90806014	kernel/generic: port r34599 over 3.7 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34600	2012-12-10 15:03:51 +00:00
Florian Fainelli	67e85c0018	kernel/generic: fix build failure on missing uhci symbol linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to `uhci_check_and_reset_hc' Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34599	2012-12-10 14:24:28 +00:00
John Crispin	c2ae0ec02a	add support for Hauppauge Broadway This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595	2012-12-10 14:13:01 +00:00
Gabor Juhos	3cbc1a49e2	ar71xx: load ar934x_nfc driver earlier Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34589	2012-12-10 10:38:11 +00:00
Gabor Juhos	1f7ae58a2c	ar71xx: ar934x_nfc: allow to control DMA data swap via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34588	2012-12-10 10:38:07 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Gabor Juhos	47f9b2a110	ar71xx: TP-LINK also has a family TL-WDR Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34577	2012-12-07 19:10:57 +00:00
Gabor Juhos	d7ba2b4840	ar71xx: add profile and build image for TP-LINK TL-WA801N/ND Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34576	2012-12-07 19:10:56 +00:00
Florian Fainelli	deeeb5f671	create Linksys WRTU54G-TM profile Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34572	2012-12-07 18:02:31 +00:00
Florian Fainelli	33f6c5ddb9	kernel: add missing USB configuration symbols after r34501 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34568	2012-12-07 11:01:53 +00:00
Florian Fainelli	8236584b13	rename interrupt number constants Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34566	2012-12-06 22:41:14 +00:00
Florian Fainelli	f1e4da0389	remove the now deprecated /proc/adm8668 interface Proper gpiolib support is hooked instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34565	2012-12-06 22:41:09 +00:00
Florian Fainelli	849662a8ec	add a gpiolib driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34564	2012-12-06 22:41:04 +00:00
Florian Fainelli	78b235cfc3	do not reset WAN and LAN blocks This is taken care of by the tulip driver accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34563	2012-12-06 22:40:58 +00:00
Florian Fainelli	b3f36553cc	enable and advertise USB support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34562	2012-12-06 22:40:54 +00:00
Florian Fainelli	a5aed4ec3a	add support for on-board EHCI controller Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34561	2012-12-06 22:40:49 +00:00
Florian Fainelli	88f6bf64cf	remove the "old" tulip forked driver We can now use the mainline tulip driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34559	2012-12-06 22:40:40 +00:00
Florian Fainelli	40ab1facd2	use the tulip platform driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34558	2012-12-06 22:40:36 +00:00
Florian Fainelli	445e77fdb5	patch the tulip driver to accept a platform variant Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34557	2012-12-06 22:40:31 +00:00
Florian Fainelli	b1f1381c27	move clock frequencies into clock driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34556	2012-12-06 22:40:26 +00:00
Florian Fainelli	60663b12b2	add CONFIG_GPIO_PL061 config symbol Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34555	2012-12-06 22:40:21 +00:00
Florian Fainelli	1232f91efb	replace the custom mtd driver with a partition parser Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34554	2012-12-06 22:40:17 +00:00
Florian Fainelli	b516c8d89d	cleanup PCI controller code At some point we should make the ADM5120 PCI controller driver a real platform driver and share that one between the two targets. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34553	2012-12-06 22:40:12 +00:00
Florian Fainelli	1ed763b888	cleanup and make interrupt code more robust Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34552	2012-12-06 22:40:02 +00:00
Florian Fainelli	47ccbaaa91	remove frequency from /proc/cpuinfo This is not the place to expose it and duplicates code reading the system frequency. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34551	2012-12-06 22:39:57 +00:00
Florian Fainelli	e37f6fb458	provide a system clock to be used by the MIPS timer Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34550	2012-12-06 22:39:52 +00:00
Florian Fainelli	79c2ce01b7	get rid of the UART defines Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34549	2012-12-06 22:39:47 +00:00
Florian Fainelli	afc2b07be1	get rid of the specific UART driver and use AMBA PL010 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34548	2012-12-06 22:39:43 +00:00
Florian Fainelli	2dee2133c5	implement early_printk without an early_console Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34547	2012-12-06 22:39:33 +00:00
Florian Fainelli	f85115efd8	simplify IRQ controller code Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34546	2012-12-06 22:39:27 +00:00
Florian Fainelli	50303d52e2	use platform_add_devices Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34545	2012-12-06 22:39:22 +00:00
Florian Fainelli	192c1e90bc	move time related functions to their own file Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34544	2012-12-06 22:39:18 +00:00
Florian Fainelli	1f939889ca	move setup-related functions to their own file Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34543	2012-12-06 22:39:08 +00:00
Felix Fietkau	abc03de599	kernel: add missing config symbols SVN-Revision: 34532	2012-12-06 14:11:16 +00:00
Felix Fietkau	a3843e7ec7	kernel 3.6+: nuke obsolete patches that are messing up oprofile builds SVN-Revision: 34506	2012-12-05 16:49:48 +00:00
Florian Fainelli	512baafc6b	kernel/3.3: move OHCI and EHCI platform drivers to generic These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34501	2012-12-05 14:18:05 +00:00
Florian Fainelli	822ee5053e	cns3xxx: fix dwc_otg driver compat with udc-core function. This removes those from the dwc_otg driver and removes the patch that comments out the linkage of udc-core so that the dwc_otg driver can co-exist happily with other USB Device Controllers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34475	2012-12-04 16:19:18 +00:00
Florian Fainelli	fd0729f35c	cns3xxx: advertise pcie usb usbgadget features Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34474	2012-12-04 16:19:12 +00:00
Florian Fainelli	d9d0814fc2	Fix Comtrend AR-5381u Power LED Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34471	2012-12-04 15:19:50 +00:00
Florian Fainelli	d3cda51994	do no longer rename amba-pl010 serial devices names Back in the days when we could not override /etc/inittab, it made a lot of sense to rename ttyAM to ttyS since this was the only supported serial device(s), we can now just put in an appropriate /etc/inittab file now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34469	2012-12-03 16:18:40 +00:00
Felix Fietkau	a7220cd9f8	kernel: disable more pci quirks to save space on platforms that don't need them SVN-Revision: 34467	2012-12-03 10:33:47 +00:00
Felix Fietkau	ec885796c0	kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips SVN-Revision: 34461	2012-12-02 18:37:41 +00:00
Felix Fietkau	24b31c9428	kernel: fix stripping symbol exports SVN-Revision: 34458	2012-12-02 17:42:17 +00:00
Hauke Mehrtens	2ac9ac5163	brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. SVN-Revision: 34454	2012-12-02 16:11:39 +00:00
Felix Fietkau	38d3b8d0ea	kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements SVN-Revision: 34449	2012-12-02 15:26:19 +00:00
Gabor Juhos	e0e43655ce	ramips: fix serial console for Belkin F5D8235 v1/v2 Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445	2012-12-02 14:16:12 +00:00
Gabor Juhos	890f83dfb3	Update linux-atm fixes to reflect the final upstream pull request [juhosg: refresh the patches with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34443	2012-12-02 13:04:04 +00:00
Jo-Philipp Wich	476ea2bcb4	imagebuilder: use file_copy to deploy files/ in the image generation phase SVN-Revision: 34439	2012-12-02 12:20:43 +00:00
Florian Fainelli	4a1e2123eb	kernel: remove references to TARGET_ubicom32 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34431	2012-11-30 10:53:51 +00:00
Florian Fainelli	527afd0e9a	remove target This target is unused, does not support any off the shelf hardware and has been a maintenance burden for quite some time now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34430	2012-11-30 10:53:47 +00:00
Florian Fainelli	c830644d97	remove Linux 3.3 support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34426	2012-11-29 21:43:02 +00:00
Florian Fainelli	763f780553	use a default kernel command-line to mount squashfs and jffs2 This fixes bug #9055. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34424	2012-11-29 21:42:53 +00:00
Gabor Juhos	7cde0281f4	kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL Patches queued upstream in net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34415	2012-11-29 17:58:28 +00:00
Gabor Juhos	4f5defdc3b	ar71xx: switch to 3.6.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34414	2012-11-29 17:53:42 +00:00
Gabor Juhos	ea17e36482	kernel: Update Geos to 3.6.8 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34411	2012-11-29 17:37:19 +00:00
Gabor Juhos	543c2c27d1	kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes) Patches about to go into net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34410	2012-11-29 17:37:18 +00:00
Gabor Juhos	df6727639a	kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34409	2012-11-29 17:37:16 +00:00
Gabor Juhos	44131bd785	ramips: rt305x: add profile and build image for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407	2012-11-29 17:37:14 +00:00

... 8 9 10 11 12 ...

10221 Commits