mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
adm5120: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35116
This commit is contained in:
parent
d472567997
commit
df8a8f2515
target/linux/adm5120
config-3.6
patches-3.6
001-adm5120.patch002-adm5120_flash.patch003-adm5120_switch.patch005-adm5120_usb.patch007-adm5120_pci.patch009-adm5120_leds_switch_trigger.patch101-cfi_fixup_macronix_bootloc.patch102-jedec_pmc_39lvxxx_chips.patch103-mtd_trxsplit.patch120-rb153_cf_driver.patch200-amba_pl010_hacks.patch201-amba_bus_hacks.patch203-gpio_leds_brightness.patch310-adm5120_wdt.patch
rb1xx
router_be
router_le
@ -1,198 +0,0 @@
|
||||
CONFIG_ADM5120=y
|
||||
CONFIG_ADM5120_ENET=y
|
||||
CONFIG_ADM5120_MACH_5GXI=y
|
||||
CONFIG_ADM5120_MACH_BR_6104K=y
|
||||
CONFIG_ADM5120_MACH_BR_6104KP=y
|
||||
CONFIG_ADM5120_MACH_BR_61X4WG=y
|
||||
CONFIG_ADM5120_MACH_CAS_771=y
|
||||
CONFIG_ADM5120_MACH_EASY5120P_ATA=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_RT=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
|
||||
CONFIG_ADM5120_MACH_EASY83000=y
|
||||
CONFIG_ADM5120_MACH_EB_214A=y
|
||||
CONFIG_ADM5120_MACH_NFS_101=y
|
||||
CONFIG_ADM5120_MACH_NP27G=y
|
||||
CONFIG_ADM5120_MACH_NP28G=y
|
||||
CONFIG_ADM5120_MACH_PMUGW=y
|
||||
# CONFIG_ADM5120_MACH_RB_11X is not set
|
||||
# CONFIG_ADM5120_MACH_RB_133 is not set
|
||||
# CONFIG_ADM5120_MACH_RB_133C is not set
|
||||
# CONFIG_ADM5120_MACH_RB_150 is not set
|
||||
# CONFIG_ADM5120_MACH_RB_153 is not set
|
||||
# CONFIG_ADM5120_MACH_RB_192 is not set
|
||||
CONFIG_ADM5120_MACH_WP54=y
|
||||
CONFIG_ADM5120_OEM_CELLVISION=y
|
||||
CONFIG_ADM5120_OEM_COMPEX=y
|
||||
CONFIG_ADM5120_OEM_EDIMAX=y
|
||||
CONFIG_ADM5120_OEM_GENERIC=y
|
||||
CONFIG_ADM5120_OEM_INFINEON=y
|
||||
# CONFIG_ADM5120_OEM_MIKROTIK is not set
|
||||
CONFIG_ADM5120_OEM_MOTOROLA=y
|
||||
CONFIG_ADM5120_OEM_OSBRIDGE=y
|
||||
# CONFIG_ADM5120_OEM_ZYXEL is not set
|
||||
CONFIG_ADM5120_SOC_BGA=y
|
||||
CONFIG_ADM5120_WDT=y
|
||||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_DISCARD_MEMBLOCK=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||
CONFIG_ATA=m
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CRYPTO=m
|
||||
CONFIG_CRYPTO_AEAD2=m
|
||||
CONFIG_CRYPTO_AES=m
|
||||
CONFIG_CRYPTO_ALGAPI=m
|
||||
CONFIG_CRYPTO_ALGAPI2=m
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRYPTO_BLKCIPHER=m
|
||||
CONFIG_CRYPTO_BLKCIPHER2=m
|
||||
CONFIG_CRYPTO_ECB=m
|
||||
CONFIG_CRYPTO_HASH=m
|
||||
CONFIG_CRYPTO_HASH2=m
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
CONFIG_CRYPTO_MANAGER2=m
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_PCOMP2=m
|
||||
CONFIG_CRYPTO_RNG2=m
|
||||
CONFIG_CRYPTO_WORKQUEUE=m
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HID=m
|
||||
CONFIG_HOSTAP=m
|
||||
CONFIG_HOSTAP_FIRMWARE=y
|
||||
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
|
||||
CONFIG_HOSTAP_PCI=m
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_INPUT=m
|
||||
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
CONFIG_LIB80211=m
|
||||
CONFIG_LIB80211_CRYPT_CCMP=m
|
||||
CONFIG_LIB80211_CRYPT_TKIP=m
|
||||
CONFIG_LIB80211_CRYPT_WEP=m
|
||||
CONFIG_MII=m
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MTD_ADM5120=y
|
||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_MYLOADER_PARTS=y
|
||||
CONFIG_MTD_TRXSPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NO_EXCEPT_FILL=y
|
||||
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_MOD=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
CONFIG_SOFT_WATCHDOG=m
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_ADM5120_HCD=m
|
||||
CONFIG_USB_ARCH_HAS_XHCI=y
|
||||
CONFIG_USB_COMMON=m
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
@ -1,44 +0,0 @@
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -46,6 +46,24 @@ choice
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config ADM5120
|
||||
+ bool "Infineon/ADMtek ADM5120 SoC based machines"
|
||||
+ select BOOT_RAW
|
||||
+ select NO_EXCEPT_FILL
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select IRQ_CPU
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
|
||||
+ select MIPS_MACHINE
|
||||
+ select HAVE_CLK
|
||||
+
|
||||
config MIPS_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
select 64BIT_PHYS_ADDR
|
||||
@@ -837,6 +855,7 @@ config NLM_XLP_BOARD
|
||||
|
||||
endchoice
|
||||
|
||||
+source "arch/mips/adm5120/Kconfig"
|
||||
source "arch/mips/alchemy/Kconfig"
|
||||
source "arch/mips/ath79/Kconfig"
|
||||
source "arch/mips/bcm47xx/Kconfig"
|
||||
--- a/arch/mips/Kbuild.platforms
|
||||
+++ b/arch/mips/Kbuild.platforms
|
||||
@@ -1,5 +1,6 @@
|
||||
# All platforms listed in alphabetic order
|
||||
|
||||
+platforms += adm5120
|
||||
platforms += alchemy
|
||||
platforms += ar7
|
||||
platforms += ath79
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/mtd/maps/Kconfig
|
||||
+++ b/drivers/mtd/maps/Kconfig
|
||||
@@ -527,4 +527,8 @@ config MTD_LATCH_ADDR
|
||||
|
||||
If compiled as a module, it will be called latch-addr-flash.
|
||||
|
||||
+config MTD_ADM5120
|
||||
+ tristate "Map driver for ADM5120 based boards"
|
||||
+ depends on ADM5120
|
||||
+
|
||||
endmenu
|
||||
--- a/drivers/mtd/maps/Makefile
|
||||
+++ b/drivers/mtd/maps/Makefile
|
||||
@@ -38,6 +38,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
|
||||
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
|
||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
||||
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
|
||||
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
|
||||
obj-$(CONFIG_MTD_IMPA7) += impa7.o
|
||||
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
|
@ -1,23 +0,0 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -244,6 +244,10 @@ source "drivers/net/dsa/Kconfig"
|
||||
|
||||
source "drivers/net/ethernet/Kconfig"
|
||||
|
||||
+config ADM5120_ENET
|
||||
+ tristate "ADM5120 Ethernet switch support"
|
||||
+ depends on ADM5120
|
||||
+
|
||||
source "drivers/net/fddi/Kconfig"
|
||||
|
||||
source "drivers/net/hippi/Kconfig"
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -32,6 +32,7 @@ obj-$(CONFIG_CAN) += can/
|
||||
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
|
||||
obj-$(CONFIG_NET_DSA) += dsa/
|
||||
obj-$(CONFIG_ETHERNET) += ethernet/
|
||||
+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
|
||||
obj-$(CONFIG_FDDI) += fddi/
|
||||
obj-$(CONFIG_HIPPI) += hippi/
|
||||
obj-$(CONFIG_HAMRADIO) += hamradio/
|
@ -1,33 +0,0 @@
|
||||
--- a/drivers/usb/Makefile
|
||||
+++ b/drivers/usb/Makefile
|
||||
@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
|
||||
obj-$(CONFIG_USB_MON) += mon/
|
||||
|
||||
obj-$(CONFIG_PCI) += host/
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += host/
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += host/
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -4,6 +4,10 @@
|
||||
comment "USB Host Controller Drivers"
|
||||
depends on USB
|
||||
|
||||
+config USB_ADM5120_HCD
|
||||
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
|
||||
+ depends on USB && ADM5120 && EXPERIMENTAL
|
||||
+
|
||||
config USB_C67X00_HCD
|
||||
tristate "Cypress C67x00 HCD support"
|
||||
depends on USB
|
||||
--- a/drivers/usb/host/Makefile
|
||||
+++ b/drivers/usb/host/Makefile
|
||||
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/
|
||||
|
||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
||||
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
@ -1,22 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
|
||||
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
|
||||
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
|
||||
ops-bcm63xx.o
|
||||
+obj-$(CONFIG_ADM5120) += pci-adm5120.o
|
||||
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
|
||||
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
|
||||
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
|
||||
--- a/include/linux/pci_ids.h
|
||||
+++ b/include/linux/pci_ids.h
|
||||
@@ -1804,6 +1804,9 @@
|
||||
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
|
||||
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
|
||||
|
||||
+#define PCI_VENDOR_ID_ADMTEK 0x1317
|
||||
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
|
||||
+
|
||||
#define PCI_VENDOR_ID_SIIG 0x131f
|
||||
#define PCI_SUBVENDOR_ID_SIIG 0x131f
|
||||
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
|
@ -1,22 +0,0 @@
|
||||
--- a/drivers/leds/Kconfig
|
||||
+++ b/drivers/leds/Kconfig
|
||||
@@ -555,4 +555,12 @@ config LEDS_TRIGGER_USBDEV
|
||||
This allows LEDs to be controlled by the presence/activity of
|
||||
an USB device. If unsure, say N.
|
||||
|
||||
+config LEDS_TRIGGER_ADM5120_SWITCH
|
||||
+ tristate "LED ADM5120 Switch Port Status Trigger"
|
||||
+ depends on LEDS_TRIGGERS && ADM5120
|
||||
+ help
|
||||
+ This allows LEDs to be controlled by the port states of
|
||||
+ the ADM5120 built-in Ethernet Switch
|
||||
+ If unsure, say N.
|
||||
+
|
||||
endif # NEW_LEDS
|
||||
--- a/drivers/leds/Makefile
|
||||
+++ b/drivers/leds/Makefile
|
||||
@@ -66,3 +66,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) +=
|
||||
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o
|
||||
+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
|
@ -1,84 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -48,6 +48,12 @@
|
||||
#define SST49LF008A 0x005a
|
||||
#define AT49BV6416 0x00d6
|
||||
|
||||
+/* Macronix */
|
||||
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
|
||||
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
|
||||
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
|
||||
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
|
||||
+
|
||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
@@ -358,6 +364,41 @@ static struct cfi_fixup cfi_nopri_fixup_
|
||||
{ 0, 0, NULL }
|
||||
};
|
||||
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+/*
|
||||
+ * Some Macronix chips has no/bad bootblock information in the CFI table
|
||||
+ */
|
||||
+static void fixup_macronix_bootloc(struct mtd_info *mtd)
|
||||
+{
|
||||
+ struct map_info *map = mtd->priv;
|
||||
+ struct cfi_private *cfi = map->fldrv_priv;
|
||||
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
|
||||
+ __u8 t;
|
||||
+
|
||||
+ switch (cfi->id) {
|
||||
+ /* TODO: put affected chip ids here */
|
||||
+ case MX29LV160B:
|
||||
+ case MX29LV320B:
|
||||
+ t = 2; /* Bottom boot */
|
||||
+ break;
|
||||
+ case MX29LV160T:
|
||||
+ case MX29LV320T:
|
||||
+ t = 3; /* Top boot */
|
||||
+ break;
|
||||
+ default:
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ if (extp->TopBottom == t)
|
||||
+ /* boot location detected by the CFI layer is correct */
|
||||
+ return;
|
||||
+
|
||||
+ extp->TopBottom = t;
|
||||
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
|
||||
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
|
||||
+}
|
||||
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
|
||||
+
|
||||
static struct cfi_fixup cfi_fixup_table[] = {
|
||||
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
|
||||
#ifdef AMD_BOOTLOC_BUG
|
||||
@@ -400,6 +441,9 @@ static struct cfi_fixup fixup_table[] =
|
||||
*/
|
||||
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
|
||||
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
|
||||
+#endif
|
||||
{ 0, 0, NULL }
|
||||
};
|
||||
|
||||
--- a/drivers/mtd/chips/Kconfig
|
||||
+++ b/drivers/mtd/chips/Kconfig
|
||||
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
|
||||
provides support for one of those command sets, used on chips
|
||||
including the AMD Am29LV320.
|
||||
|
||||
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ bool "Fix boot-block location for Macronix flash chips"
|
||||
+ depends on MTD_CFI_AMDSTD
|
||||
+ help
|
||||
+ Some Macronix flash chips have no/wrong boot-block location in the
|
||||
+ CFI table, and the driver may detect the type incorrectly. Select
|
||||
+ this if your board has such chip.
|
||||
+
|
||||
config MTD_CFI_STAA
|
||||
tristate "Support for ST (Advanced Architecture) flash chips"
|
||||
depends on MTD_GEN_PROBE
|
@ -1,68 +0,0 @@
|
||||
--- a/drivers/mtd/chips/jedec_probe.c
|
||||
+++ b/drivers/mtd/chips/jedec_probe.c
|
||||
@@ -115,6 +115,10 @@
|
||||
#define UPD29F064115 0x221C
|
||||
|
||||
/* PMC */
|
||||
+#define PM39LV512 0x001B
|
||||
+#define PM39LV010 0x001C
|
||||
+#define PM39LV020 0x003D
|
||||
+#define PM39LV040 0x003E
|
||||
#define PM49FL002 0x006D
|
||||
#define PM49FL004 0x006E
|
||||
#define PM49FL008 0x006A
|
||||
@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
|
||||
ERASEINFO(0x02000,2),
|
||||
ERASEINFO(0x04000,1),
|
||||
}
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV512,
|
||||
+ .name = "PMC Pm39LV512",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_64KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,16),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV010,
|
||||
+ .name = "PMC Pm39LV010",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_128KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,32),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV020,
|
||||
+ .name = "PMC Pm39LV020",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_256KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,64),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV040,
|
||||
+ .name = "PMC Pm39LV040",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_512KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,128),
|
||||
+ }
|
||||
}, {
|
||||
.mfr_id = CFI_MFR_PMC,
|
||||
.dev_id = PM49FL002,
|
@ -1,23 +0,0 @@
|
||||
--- a/drivers/mtd/Kconfig
|
||||
+++ b/drivers/mtd/Kconfig
|
||||
@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
|
||||
bool "Automatically split 'rootfs' partition for squashfs"
|
||||
default y
|
||||
|
||||
+config MTD_TRXSPLIT
|
||||
+ bool "Automatically find and split TRX partitions"
|
||||
+ default n
|
||||
+
|
||||
config MTD_REDBOOT_PARTS
|
||||
tristate "RedBoot partition table parsing"
|
||||
---help---
|
||||
--- a/drivers/mtd/Makefile
|
||||
+++ b/drivers/mtd/Makefile
|
||||
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
|
||||
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
|
||||
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
|
@ -1,28 +0,0 @@
|
||||
--- a/drivers/ata/Makefile
|
||||
+++ b/drivers/ata/Makefile
|
||||
@@ -89,6 +89,7 @@ obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia
|
||||
obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
|
||||
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
||||
+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
|
||||
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
||||
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
||||
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
|
||||
--- a/drivers/ata/Kconfig
|
||||
+++ b/drivers/ata/Kconfig
|
||||
@@ -844,6 +844,15 @@ config PATA_QDI
|
||||
help
|
||||
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
|
||||
|
||||
+config PATA_RB153_CF
|
||||
+ tristate "RouterBOARD 153 Compact Flash support"
|
||||
+ depends on ADM5120_MACH_RB_153
|
||||
+ help
|
||||
+ This option enables support for a Compact Flash connected on
|
||||
+ the RouterBOARD 153.
|
||||
+
|
||||
+ If unsure, say N.
|
||||
+
|
||||
config PATA_RB532
|
||||
tristate "RouterBoard 532 PATA CompactFlash support"
|
||||
depends on MIKROTIK_RB532
|
@ -1,355 +0,0 @@
|
||||
--- a/drivers/tty/serial/amba-pl010.c
|
||||
+++ b/drivers/tty/serial/amba-pl010.c
|
||||
@@ -49,11 +49,9 @@
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
-#define UART_NR 8
|
||||
-
|
||||
#define SERIAL_AMBA_MAJOR 204
|
||||
#define SERIAL_AMBA_MINOR 16
|
||||
-#define SERIAL_AMBA_NR UART_NR
|
||||
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
||||
|
||||
#define AMBA_ISR_PASS_LIMIT 256
|
||||
|
||||
@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~UART010_CR_TIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_start_tx(struct uart_port *port)
|
||||
@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_TIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_stop_rx(struct uart_port *port)
|
||||
@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_enable_ms(struct uart_port *port)
|
||||
@@ -109,9 +107,9 @@ static void pl010_enable_ms(struct uart_
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_MSIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_rx_chars(struct uart_amba_port *uap)
|
||||
@@ -119,9 +117,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
struct tty_struct *tty = uap->port.state->port.tty;
|
||||
unsigned int status, ch, flag, rsr, max_count = 256;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
while (UART_RX_DATA(status) && max_count--) {
|
||||
- ch = readb(uap->port.membase + UART01x_DR);
|
||||
+ ch = __raw_readl(uap->port.membase + UART01x_DR);
|
||||
flag = TTY_NORMAL;
|
||||
|
||||
uap->port.icount.rx++;
|
||||
@@ -130,9 +128,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
||||
- writel(0, uap->port.membase + UART01x_ECR);
|
||||
+ __raw_writel(0, uap->port.membase + UART01x_ECR);
|
||||
|
||||
if (rsr & UART01x_RSR_BE) {
|
||||
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
|
||||
@@ -162,7 +160,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
||||
|
||||
ignore_char:
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
}
|
||||
spin_unlock(&uap->port.lock);
|
||||
tty_flip_buffer_push(tty);
|
||||
@@ -175,7 +173,7 @@ static void pl010_tx_chars(struct uart_a
|
||||
int count;
|
||||
|
||||
if (uap->port.x_char) {
|
||||
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
||||
uap->port.icount.tx++;
|
||||
uap->port.x_char = 0;
|
||||
return;
|
||||
@@ -187,7 +185,7 @@ static void pl010_tx_chars(struct uart_a
|
||||
|
||||
count = uap->port.fifosize >> 1;
|
||||
do {
|
||||
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
uap->port.icount.tx++;
|
||||
if (uart_circ_empty(xmit))
|
||||
@@ -205,9 +203,9 @@ static void pl010_modem_status(struct ua
|
||||
{
|
||||
unsigned int status, delta;
|
||||
|
||||
- writel(0, uap->port.membase + UART010_ICR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_ICR);
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
delta = status ^ uap->old_status;
|
||||
uap->old_status = status;
|
||||
@@ -235,7 +233,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
|
||||
spin_lock(&uap->port.lock);
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
||||
if (status) {
|
||||
do {
|
||||
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
||||
@@ -248,7 +246,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
if (pass_counter-- == 0)
|
||||
break;
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
||||
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
||||
UART010_IIR_TIS));
|
||||
handled = 1;
|
||||
@@ -262,7 +260,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
static unsigned int pl010_tx_empty(struct uart_port *port)
|
||||
{
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
||||
+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
@@ -272,7 +270,7 @@ static unsigned int pl010_get_mctrl(stru
|
||||
unsigned int result = 0;
|
||||
unsigned int status;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
if (status & UART01x_FR_DCD)
|
||||
result |= TIOCM_CAR;
|
||||
if (status & UART01x_FR_DSR)
|
||||
@@ -298,12 +296,12 @@ static void pl010_break_ctl(struct uart_
|
||||
unsigned int lcr_h;
|
||||
|
||||
spin_lock_irqsave(&uap->port.lock, flags);
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
||||
if (break_state == -1)
|
||||
lcr_h |= UART01x_LCRH_BRK;
|
||||
else
|
||||
lcr_h &= ~UART01x_LCRH_BRK;
|
||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||||
}
|
||||
|
||||
@@ -335,12 +333,12 @@ static int pl010_startup(struct uart_por
|
||||
/*
|
||||
* initialise the old status of the modem signals
|
||||
*/
|
||||
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
/*
|
||||
* Finally, enable interrupts
|
||||
*/
|
||||
- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
||||
+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
||||
uap->port.membase + UART010_CR);
|
||||
|
||||
return 0;
|
||||
@@ -365,10 +363,10 @@ static void pl010_shutdown(struct uart_p
|
||||
/*
|
||||
* disable all interrupts, disable the port
|
||||
*/
|
||||
- writel(0, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* disable break condition and fifos */
|
||||
- writel(readb(uap->port.membase + UART010_LCRH) &
|
||||
+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
|
||||
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
||||
uap->port.membase + UART010_LCRH);
|
||||
|
||||
@@ -391,7 +389,7 @@ pl010_set_termios(struct uart_port *port
|
||||
/*
|
||||
* Ask the core to calculate the divisor for us.
|
||||
*/
|
||||
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
@@ -454,25 +452,25 @@ pl010_set_termios(struct uart_port *port
|
||||
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
||||
|
||||
/* first, disable everything */
|
||||
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
|
||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
||||
old_cr |= UART010_CR_MSIE;
|
||||
|
||||
- writel(0, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* Set baud rate */
|
||||
quot -= 1;
|
||||
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
||||
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
||||
+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
||||
+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
||||
|
||||
/*
|
||||
* ----------v----------v----------v----------v-----
|
||||
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
|
||||
* ----------^----------^----------^----------^-----
|
||||
*/
|
||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
||||
|
||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||||
}
|
||||
@@ -554,7 +552,7 @@ static struct uart_ops amba_pl010_pops =
|
||||
.verify_port = pl010_verify_port,
|
||||
};
|
||||
|
||||
-static struct uart_amba_port *amba_ports[UART_NR];
|
||||
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
||||
|
||||
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
||||
|
||||
@@ -564,10 +562,10 @@ static void pl010_console_putchar(struct
|
||||
unsigned int status;
|
||||
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (!UART_TX_READY(status));
|
||||
- writel(ch, uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(ch, uap->port.membase + UART01x_DR);
|
||||
}
|
||||
|
||||
static void
|
||||
@@ -581,8 +579,8 @@ pl010_console_write(struct console *co,
|
||||
/*
|
||||
* First save the CR then disable the interrupts
|
||||
*/
|
||||
- old_cr = readb(uap->port.membase + UART010_CR);
|
||||
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
|
||||
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
||||
|
||||
@@ -591,10 +589,10 @@ pl010_console_write(struct console *co,
|
||||
* and restore the TCR
|
||||
*/
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (status & UART01x_FR_BUSY);
|
||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
||||
|
||||
clk_disable(uap->clk);
|
||||
}
|
||||
@@ -603,9 +601,9 @@ static void __init
|
||||
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
||||
int *parity, int *bits)
|
||||
{
|
||||
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
unsigned int lcr_h, quot;
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
||||
|
||||
*parity = 'n';
|
||||
if (lcr_h & UART01x_LCRH_PEN) {
|
||||
@@ -620,8 +618,8 @@ pl010_console_get_options(struct uart_am
|
||||
else
|
||||
*bits = 8;
|
||||
|
||||
- quot = readb(uap->port.membase + UART010_LCRL) |
|
||||
- readb(uap->port.membase + UART010_LCRM) << 8;
|
||||
+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
|
||||
+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
|
||||
*baud = uap->port.uartclk / (16 * (quot + 1));
|
||||
}
|
||||
}
|
||||
@@ -640,7 +638,7 @@ static int __init pl010_console_setup(st
|
||||
* if so, search for the first available port that does have
|
||||
* console support.
|
||||
*/
|
||||
- if (co->index >= UART_NR)
|
||||
+ if (co->index >= SERIAL_AMBA_NR)
|
||||
co->index = 0;
|
||||
uap = amba_ports[co->index];
|
||||
if (!uap)
|
||||
@@ -682,7 +680,7 @@ static struct uart_driver amba_reg = {
|
||||
.dev_name = "ttyAM",
|
||||
.major = SERIAL_AMBA_MAJOR,
|
||||
.minor = SERIAL_AMBA_MINOR,
|
||||
- .nr = UART_NR,
|
||||
+ .nr = SERIAL_AMBA_NR,
|
||||
.cons = AMBA_CONSOLE,
|
||||
};
|
||||
|
||||
--- a/drivers/tty/serial/Kconfig
|
||||
+++ b/drivers/tty/serial/Kconfig
|
||||
@@ -16,10 +16,18 @@ config SERIAL_AMBA_PL010
|
||||
help
|
||||
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
||||
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
||||
- Cirrus Logic EP93xx CPU, say Y or M here.
|
||||
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config SERIAL_AMBA_PL010_NUMPORTS
|
||||
+ int "Maximum number of AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "8"
|
||||
+ ---help---
|
||||
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
||||
+ to support.
|
||||
+
|
||||
config SERIAL_AMBA_PL010_CONSOLE
|
||||
bool "Support for console on AMBA serial port"
|
||||
depends on SERIAL_AMBA_PL010=y
|
@ -1,13 +0,0 @@
|
||||
--- a/drivers/amba/bus.c
|
||||
+++ b/drivers/amba/bus.c
|
||||
@@ -20,6 +20,10 @@
|
||||
|
||||
#include <asm/irq.h>
|
||||
|
||||
+#ifndef NO_IRQ
|
||||
+#define NO_IRQ (-1)
|
||||
+#endif
|
||||
+
|
||||
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
|
||||
|
||||
static const struct amba_id *
|
@ -1,27 +0,0 @@
|
||||
--- a/drivers/leds/leds-gpio.c
|
||||
+++ b/drivers/leds/leds-gpio.c
|
||||
@@ -54,13 +54,17 @@ static void gpio_led_set(struct led_clas
|
||||
container_of(led_cdev, struct gpio_led_data, cdev);
|
||||
int level;
|
||||
|
||||
- if (value == LED_OFF)
|
||||
- level = 0;
|
||||
- else
|
||||
- level = 1;
|
||||
-
|
||||
- if (led_dat->active_low)
|
||||
- level = !level;
|
||||
+ switch (value) {
|
||||
+ case LED_OFF:
|
||||
+ level = led_dat->active_low ? 1 : 0;
|
||||
+ break;
|
||||
+ case LED_FULL:
|
||||
+ level = led_dat->active_low ? 0 : 1;
|
||||
+ break;
|
||||
+ default:
|
||||
+ level = value;
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
/* Setting GPIOs with I2C/etc requires a task context, and we don't
|
||||
* seem to have a reliable way to know if we're already in one; so
|
@ -1,31 +0,0 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -972,6 +972,18 @@ config RC32434_WDT
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called rc32434_wdt.
|
||||
|
||||
+config ADM5120_WDT
|
||||
+ tristate "Infineon ADM5120 SoC hardware watchdog"
|
||||
+ depends on WATCHDOG && ADM5120
|
||||
+ help
|
||||
+ This is a driver for hardware watchdog integrated in Infineon
|
||||
+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
|
||||
+ it doesn't freeze, and if it does, it reboots your computer after a
|
||||
+ certain amount of time.
|
||||
+
|
||||
+ To compile this driver as a module, choose M here: the module will be
|
||||
+ called adm5120_wdt.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on SGI_HAS_INDYDOG
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
|
||||
obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
|
||||
obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
|
||||
obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
|
||||
+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
|
||||
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
|
@ -1,54 +0,0 @@
|
||||
# CONFIG_ADM5120_MACH_5GXI is not set
|
||||
# CONFIG_ADM5120_MACH_BR_6104K is not set
|
||||
# CONFIG_ADM5120_MACH_BR_6104KP is not set
|
||||
# CONFIG_ADM5120_MACH_BR_61X4WG is not set
|
||||
# CONFIG_ADM5120_MACH_CAS_771 is not set
|
||||
# CONFIG_ADM5120_MACH_EASY5120P_ATA is not set
|
||||
# CONFIG_ADM5120_MACH_EASY5120_RT is not set
|
||||
# CONFIG_ADM5120_MACH_EASY5120_WVOIP is not set
|
||||
# CONFIG_ADM5120_MACH_EASY83000 is not set
|
||||
# CONFIG_ADM5120_MACH_EB_214A is not set
|
||||
# CONFIG_ADM5120_MACH_NFS_101 is not set
|
||||
# CONFIG_ADM5120_MACH_NP27G is not set
|
||||
# CONFIG_ADM5120_MACH_NP28G is not set
|
||||
# CONFIG_ADM5120_MACH_PMUGW is not set
|
||||
CONFIG_ADM5120_MACH_RB_11X=y
|
||||
CONFIG_ADM5120_MACH_RB_133=y
|
||||
CONFIG_ADM5120_MACH_RB_133C=y
|
||||
CONFIG_ADM5120_MACH_RB_150=y
|
||||
CONFIG_ADM5120_MACH_RB_153=y
|
||||
CONFIG_ADM5120_MACH_RB_192=y
|
||||
# CONFIG_ADM5120_MACH_WP54 is not set
|
||||
# CONFIG_ADM5120_OEM_CELLVISION is not set
|
||||
# CONFIG_ADM5120_OEM_COMPEX is not set
|
||||
# CONFIG_ADM5120_OEM_EDIMAX is not set
|
||||
# CONFIG_ADM5120_OEM_GENERIC is not set
|
||||
# CONFIG_ADM5120_OEM_INFINEON is not set
|
||||
CONFIG_ADM5120_OEM_MIKROTIK=y
|
||||
# CONFIG_ADM5120_OEM_MOTOROLA is not set
|
||||
# CONFIG_ADM5120_OEM_OSBRIDGE is not set
|
||||
CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=yaffs2"
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
# CONFIG_MTD_MYLOADER_PARTS is not set
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
# CONFIG_MTD_TRXSPLIT is not set
|
||||
# CONFIG_OVERLAYFS_FS is not set
|
||||
# CONFIG_PATA_RB153_CF is not set
|
||||
# CONFIG_SQUASHFS is not set
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
||||
# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
|
||||
# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
|
||||
CONFIG_YAFFS_DISABLE_TAGS_ECC=y
|
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
||||
# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
|
||||
CONFIG_YAFFS_FS=y
|
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_XATTR=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
@ -1,13 +0,0 @@
|
||||
CONFIG_ADM5120_MACH_P_334WT=y
|
||||
CONFIG_ADM5120_MACH_P_335=y
|
||||
# CONFIG_ADM5120_OEM_CELLVISION is not set
|
||||
# CONFIG_ADM5120_OEM_COMPEX is not set
|
||||
# CONFIG_ADM5120_OEM_EDIMAX is not set
|
||||
# CONFIG_ADM5120_OEM_GENERIC is not set
|
||||
# CONFIG_ADM5120_OEM_INFINEON is not set
|
||||
# CONFIG_ADM5120_OEM_MOTOROLA is not set
|
||||
# CONFIG_ADM5120_OEM_OSBRIDGE is not set
|
||||
CONFIG_ADM5120_OEM_ZYXEL=y
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
CONFIG_SWAP_IO_SPACE=y
|
Loading…
Reference in New Issue
Block a user