Commit Graph

740 Commits

Author SHA1 Message Date
Petr Štetiar
5ea3ea154f kernel: bump 5.4 to 5.4.36
Refreshed patches, removed upstreamed patch:

 generic/hack: 551-loop-Better-discard-support-for-block-devices.patch

Added generic config symbol `ARM64_ERRATUM_1542419` due to Fixes:
f2791551cedb ("arm64: errata: Hide CTR_EL0.DIC on systems affected by
Neoverse-N1 #1542419").

Run tested: qemu-x86-64, apalis, nbg6617
Build tested: x86/64, imx6, ipq40xx, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
DENG Qingfang
ad697aabc3 bcm53xx: 5.4: enable NAND
NAND driver was dropped in the 5.4 bump, so enable it back

Fixes: 50c6938b95 ("bcm53xx: add v5.4 support")
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-04-26 21:45:41 +02:00
Koen Vandeputte
3c3825436e kernel: bump 4.19 to 4.19.115
Refreshed all patches.

Remove upstreamed:
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Fixes:
- CVE-2020-8647
- CVE-2020-8648 (potentially)
- CVE-2020-8649

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-04-16 13:23:11 +02:00
Dan Haab
c459a6bf48 bcm53xx: add support for Luxul FullMAC WiFi devices
This prepares support for models XAP-1610 and XWR-3150. Flashing
requires using Luxul firmware version:
1) 8.1.0 or newer for XAP-1610
2) 6.4.0 or newer for XWR-3150
and uploading firmware using "Firmware Update" web UI page.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
2020-04-07 15:27:52 +02:00
Rafał Miłecki
b51ea43f90 bcm53xx: refactor board.d code in 02_network
1. Use functions for cleaner code
2. Always execute WAN interface generic code

Before this change WAN interface code wasn't executed on all devices due
to an early "exit 0".

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-04-03 17:59:56 +02:00
Rafał Miłecki
8abefc8896 bcm53xx: sysupgrade: optimize building UBI image
Use "truncate" to adjust size of existing file instead of "dd" which
required creating a copy. This saves space on tmpfs. It may be as low
as 2.1 MiB when using OpenWrt default user space and way more (20+ MiB)
when flashing vendor firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-03-21 22:31:35 +01:00
Petr Štetiar
9ba09653ad treewide: remove maintainer variable from targets
There is no such role as target maintainer anymore, one should always
send corresponding changes for the review and anyone from the commiters
is allowed to merge them or eventually use the hand break and NACK them.

Lets make it clear, that it is solely a community doing the maintenance
tasks.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Piotr Dymacz <pepe2k@gmail.com>
2020-03-16 22:21:45 +01:00
Yousong Zhou
860652f4b9 kernel: 5.4: move some kconfig options to generic
CONFIG_64BIT_TIME=y
	CONFIG_KASAN_STACK=1
	CONFIG_UBSAN_ALIGNMENT=y
	CONFIG_UNIX_SCM=y
	CONFIG_DMA_DECLARE_COHERENT=y
	CONFIG_OF_RESERVED_MEM=y

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-03-10 10:05:50 +08:00
Koen Vandeputte
f9f62d43e4 kernel: bump 5.4 to 5.4.24
Refreshed all patches.

Compile-tested on: imx6
Runtime-tested on: imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
Koen Vandeputte
e64564920a kernel: bump 4.19 to 4.19.108
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
Rafał Miłecki
0493d57e04 bcm53xx: fix ASUS firmwares to use vendor format
Image building process was missing "asus-trx" step which resulted in raw
TRX files (without ASUS footer with device id).

Fixes: 0b9de8daa7 ("bcm53xx: add profiles for all other (SoftMAC) devices")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-03-02 22:06:02 +01:00
John Crispin
50c6938b95 bcm53xx: add v5.4 support
Signed-off-by: John Crispin <john@phrozen.org>
2020-02-28 17:50:46 +01:00
Koen Vandeputte
b6c9d2bab0 kernel: bump 4.19 to 4.19.105
Refreshed all patches.

Fixes:
- CVE-2013-1798
- CVE-2019-3016

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-24 14:19:16 +01:00
Koen Vandeputte
f4bea1b6a3 kernel: bump 4.14 to 4.14.171
Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-24 14:18:59 +01:00
Dan Haab
1d47f81581 bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers
Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet
ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0
or newer and uploading firmware using "Firmware Update" web UI page.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
2020-02-07 09:31:22 +01:00
Koen Vandeputte
20b5a4ca01 kernel: bump 4.19 to 4.19.101
Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 950-0202-staging-bcm2835-camera-fix-module-autoloading.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00
Koen Vandeputte
1b310cff0f kernel: bump 4.14 to 4.14.169
Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00
Sungbo Eo
c26b687e31 kernel: remove further obsolete kernel version switches
Most of the kernel version switches below 4.14 were removed in commit
97940f8766 ("kernel: remove obsolete kernel version switches"),
but some of them still remained. Remove them now.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-01-18 19:39:05 +01:00
Dan Haab
63c43e5674 bcm53xx: sysupgrade: support Luxul NAND devices
This adds support for UBI-aware sysupgrade using Luxul formats.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
2019-10-15 20:23:04 +02:00
Rafał Miłecki
fedc5b65dc bcm53xx: fix serial console on Luxul XWC-2000
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 15:46:23 +02:00
Rafał Miłecki
64b7dbb300 bcm53xx: fix sysupgrade for Luxul XWC-2000
Use a correct "compatible" value as in the upstream DTS file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 11:41:32 +02:00
Rafał Miłecki
06091afada bcm53xx: add pending patch adding Luxul XWC-2000 DTS file
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 10:07:00 +02:00
Dan Haab
bc5db7364d bcm53xx: sysupgrade: support Luxul firmware format
Allow flashing Luxul devices using vendor firmware format. The next step
will be building proper images once they are conirmed to work.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
2019-09-16 16:01:42 +02:00
Rafał Miłecki
c19b9f9a26 bcm53xx: extend firmware validation
This provides TRX validation result to the validation JSON. It also
prevents users from installing broken firmware files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-06 12:52:59 +02:00
Paul Spooren
ac418ddecc bcm53xx: add generic subtarget
Same game as for 853e4dd306. Add generic
to the filenames.

CC: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Paul Spooren <mail@aparcar.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-02 22:38:47 +02:00
Koen Vandeputte
1bc31e0339 kernel: bump 4.19 to 4.19.68
Refreshed all patches.

Remove upstreamed:
- 950-0307-Revert-pwm-Set-class-for-exported-channels-in-sysfs.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-28 13:08:20 +02:00
Moritz Warning
3bef16bb30 bcm53xx: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-08-02 22:45:02 +02:00
Rafał Miłecki
ccf8a8e863 bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()
Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in
the commit 30f61a34b4 ("base-files: always use staged sysupgrade").

This change brings bcm53xx in sync with other targets and allows
dropping backward compatibility code. It shouldn't change any user
visible behavior.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-07-08 07:38:12 +02:00
Koen Vandeputte
577174cf60 kernel: bump 4.19 to 4.19.56
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-25 16:46:01 +02:00
Koen Vandeputte
11b4d29ef5 kernel: bump 4.19 to 4.19.50
Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-12 15:04:09 +02:00
Koen Vandeputte
a7e68927d0 kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)
Refreshed all patches.

This bump contains upstream commits which seem to avoid (not properly fix)
the errors as seen in FS#2305 and FS#2297

Altered patches:
- 403-net-mvneta-convert-to-phylink.patch
- 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-12 15:04:09 +02:00
Felix Fietkau
85017c40f4 build: add a config option for enabling a testing version of the target kernel
If the target supports a newer kernel version that is not used by default
yet, it can be enabled with this option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-11 11:37:10 +02:00
Koen Vandeputte
8df12d76c6 kernel: bump 4.19 to 4.19.34
Refreshed all patches.

Removed:
- 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch

Altered:
- 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch
- 650-netfilter-add-xt_OFFLOAD-target.patch
- 662-remove_pfifo_fast.patch
- 332-arc-add-OWRTDTB-section.patch
- 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch
- 702-phy_add_aneg_done_function.patch

New symbols:
- ARC_IRQ_NO_AUTOSAVE
- SUN50I_ERRATUM_UNKNOWN1

Compile-tested: cns3xxx, imx6, sunxi
Runtime-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-04-08 14:53:39 +02:00
Rafał Miłecki
9687cc8556 bcm53xx: add first DTS changes queued for the Linux 5.1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-02-01 07:09:27 +01:00
Hao Dong
62dadcb86c bcm53xx: add support for Phicomm K3
Hardware specifications:

- CPU: Broadcom BCM4709C0 @1.4GHz (Dual-Core ARM)
- RAM: 512 MB (DDR3)
- Flash: 128 MB (NAND)
- LAN ports: 3, LAN speed: 10/100/1000
- WAN ports: 1, WAN speed: 10/100/1000
- 2.4G: BCM4366 4x4 MIMO 1000Mbps -- Skyworks SE2623L 2.4GHz Power Amplifier (x4)
- 5G: BCM4366 4x4 MIMO 2167Mbps -- RFMD RFPA5542 5GHz Power Amplifier Module (x4)
- USB: 1x USB 3.0 port
- 1x LED, 1x reset button, 1x power switch
- 1x system status touch screen

Flash:

- Enter CFE
- Upload the trx file
- Reboot

Signed-off-by: Hao Dong <halbertdong@gmail.com>
2019-01-20 23:34:44 +01:00
Stijn Tintel
a37098a2d0 kernel: bump 4.19 to 4.19.16
Refresh patches.
Remove upstreamed patches:
- backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch
- backport/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch
- backport/424-v4.20-net-dsa-fix-88e6060-roaming.patch
- hack/100-mtd-rawnand-qcom-fix-memory-corruption-that-causes-p.patch
- pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch
Update patch that no longer applies:
- backport/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch

Compile-tested: mesongx
Runtime-tested: mesongx

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-01-17 03:04:13 +02:00
Stijn Tintel
8c6f00ef4f kernel: bump 4.14 to 4.14.93
Refresh patches.
Remove upstreamed patches:
- backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch
- pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch
- brcm2708/950-0415-qmi_wwan-apply-SET_DTR-quirk-to-the-SIMCOM-shared-de.patch

Compile-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64
Runtime-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-01-14 02:20:40 +02:00
Koen Vandeputte
f56a4e809b kernel: bump 4.14 to 4.14.91
Refreshed all patches.

Removed upstreamed:
- 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
Rafał Miłecki
f3006059eb bcm53xx: update 4.19 config
There were 3 new symbols possible to choose: ARCH_BCM_HR2, PCI_V3_SEMI
and PHY_BCM_SR_PCIE.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-27 08:15:08 +01:00
Rafał Miłecki
75b134c4c5 bcm53xx: add support for the kernel 4.19
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-27 07:59:03 +01:00
Rafał Miłecki
7a7d19abcf bcm53xx: backport DTS changes queued for the 4.21
It just replaces some downstream patches & adds relicensing work.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-27 07:33:24 +01:00
Rafał Miłecki
a5d6f2eb76 bcm53xx: rename dts backport patches changing their prefixes
Start 03x with 030 instead of 035. It's a trivial change that adds more
place for further backports in the 03x space.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-27 07:03:30 +01:00
Rafał Miłecki
a28f6ab27f bcm53xx: update pinctrl driver & use its new DT binding
Driver has been updated upstream to support more precise DT binding and
avoid mapping conflicts between pinctrl and USB 2.0 PHY.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-25 15:52:37 +01:00
Rafał Miłecki
4472df23da bcm53xx: include WiFi firmware for devices with 4366C0
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-17 12:51:06 +01:00
Koen Vandeputte
fdd11a6eae kernel: bump 4.14 to 4.14.88
Refreshed all patches.

Altered patches:
- 180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Fixes CVE:
- CVE-2018-14625

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-14 13:01:49 +01:00
Koen Vandeputte
0028f86687 kernel: bump 4.14 to 4.14.86
Refreshed all patches.

Altered patches:
- 180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-10 11:48:44 +01:00
Rafał Miłecki
d3381b5a64 bcm53xx: request Seama parser on DIR-885L directly
It's more reliable as mtd subsystem doesn't have to blindly try that
parser. It allows disabling MTD_SPLIT_FIRMWARE completely (TRX is
handled in a similar way).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-22 10:13:56 +01:00
Koen Vandeputte
e14dc93073 kernel: bump 4.14 to 4.14.81
Refreshed all patches.

Removed upstreamed patches:
- 081-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch

Altered patches:
- 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events

Compile-tested on: cns3xxx, imx6, ipq806x, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00
Rafał Miłecki
0cf32de17c bcm53xx: add DT patch describing pins mux controller
It's needed to support new devices that use specific pin functions.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 22:29:16 +01:00
Rafał Miłecki
f975ab8f4e bcm53xx: update pinctrl driver
It's upstream now with a one trivial fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 07:41:36 +01:00
Koen Vandeputte
c764b2b531 kernel: bump 4.14 to 4.14.79
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
Koen Vandeputte
5f298b95a1 kernel: add missing symbol for target bcm53xx
Fixes: ca88f4153f ("kernel: bump 4.14 to 4.14.77")

Reported-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-23 10:57:02 +02:00
Rafał Miłecki
9b385b2496 bcm53xx: use upstream SPI controller fix
This just moves patch to use 0xx prefix and includes maintainer's s-o-b.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-23 09:43:08 +02:00
Koen Vandeputte
bc3d47cd12 kernel: bump 4.14 to 4.14.78
Refreshed all patches.

Remove upstreamed:
- 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-22 15:28:31 +02:00
Mathias Kresin
80c61c161a treewide: use wpad-basic for not small flash targets
Add out of the box support for 802.11r and 802.11w to all targets not
suffering from small flash.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Mathias did all the heavy lifting on this, but I'm the one who should
get shouted at for committing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 15:07:41 +01:00
Rafał Miłecki
f00cb94f7c bcm53xx: add pending pinctrl driver
It's required to support devices using adjustable SoC pins for some
specific purpose (e.g. I2C, PWM, UART1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-11 14:19:22 +02:00
Rafał Miłecki
92de28b751 bcm53xx: replace SPI revert with a fix sent upstream
Instead of reverting whole commit it's enough to just revert a single
line change. It seems the real problem with the regressing commit was a
bump of read chunk size. Switching back to 256 B chunks is enough to fix
the problem/regression.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-11 10:04:46 +02:00
Rene Kjellerup
53be2d2a4e bcm53xx: added basic dts for linksys ea6500v2
only thing not working is the b43 5GHz wifi band as upstream
kernel
doesn't supporthe 0x4360 chip so far

Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
2018-10-07 02:12:06 +02:00
Koen Vandeputte
e9d92bf1e1 kernel: bump 4.14 to 4.14.72
Refreshed all patches.

Removed upstreamed:
- 203-MIPS-ath79-fix-restart.patch
- 0013-MIPS-ath79-fix-system-restart.patch
- 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch
- 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch
- 700-1-6-e1000e-Remove-Other-from-EIAC.patch
- 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
- 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch
- 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-26 15:54:18 +02:00
Rafał Miłecki
43d36606d6 kernel: pick earlycon regression fixes from the stable-queue.git
This fixes regression introduced in kernel 4.14 and makes bcm53xx revert
obsolete.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-09-24 13:47:06 +02:00
Koen Vandeputte
01793e8752 kernel: bump 4.14 to 4.14.67
Refreshed all patches.

Removed upstreamed patches:
- 037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-28 23:05:39 +02:00
Stijn Tintel
22b9f99b87 kernel: bump 4.14 to 4.14.59
Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch

Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch

In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.

Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883

Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-07-31 05:11:07 +03:00
Rafał Miłecki
0417b08b06 bcm53xx: revert SPI controller commit breaking flash reads
That upstream commit caused instability in flash reads. It was reported
but there isn't any proper fix as for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-29 11:02:57 +02:00
Rafał Miłecki
a07730472c bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+
This includes Linksys EA9500 support, BCM53573 timer fix and
upstream-ready partitions patch that replaces two downstream hacks.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:48:10 +02:00
Rafał Miłecki
8a175ea219 bcm53xx: switch USB 3.0 PHY DT description to use MDIO bus
USB 3.0 PHY is attached to the MDIO bus and should be supported
(accessed) as a MDIO device. This wasn't known initially which resulted
in writing driver that was working with MDIO bus (using some magic
values) without knowing it.

This commit updates DT to properly describe MDIO & USB 3.0 PHY and
enables required kernel drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:46:08 +02:00
Rafał Miłecki
5c8b8a3fd4 bcm53xx: backport DT fix for I2C controller interrupt
Specified interrupt type was incorrect.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-28 21:36:33 +02:00
Rafał Miłecki
6bcafea2c0 kernel: backport mtd patches with Broadcom of_match_table-s
Two tiny & trivial patches with no regression risk. One simplifies
bcm53xx downstream patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 15:55:01 +02:00
Rafał Miłecki
93cc44c433 bcm53xx: exit if writing kernel during sysupgrade fails
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 13:47:08 +02:00
Rafał Miłecki
c3d9109fad bcm53xx: drop not ready support for Luxul devices
Support for these devices isn't ready yet and it was only accidentally
pushed in the commit 0da9303e5b ("mac80211: backport "brcmfmac:
cleanup and some rework" from 4.17").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 08:46:23 +02:00
Rafał Miłecki
0da9303e5b mac80211: backport "brcmfmac: cleanup and some rework" from 4.17
It was described by Arend as:

> This series is intended for 4.17 and includes following:
>
>  * rework bus layer attach code.
>  * remove duplicate variable declaration.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-17 22:46:29 +02:00
Rafał Miłecki
e53d0da775 bcm53xx: fix NAND partitions on D-Link DIR-885L
This fixes missing rootfs on above device:
[    2.652292] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
(...)
[    2.687909] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Fixes: 05cb6aa69f ("bcm53xx: replace linux,part-probe with a proper partitions subnode")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-17 22:41:15 +02:00
Stijn Tintel
e52f3e9b13 kernel: bump 4.14 to 4.14.48
Remove upstreamed patches:
generic/pending/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch
generic/pending/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch
generic/pending/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch
lantiq/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch
Update patches that no longer apply:
generic/pending/811-pci_disable_usb_common_quirks.patch
ath79/0009-MIPS-ath79-add-lots-of-missing-registers.patch

Fixes CVE-2018-6412.

Compile-tested: octeon, x86/64.
Runtime-tested: octeon, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-06-05 22:54:00 +03:00
Koen Vandeputte
faf0a460c4 kernel: bump 4.14 to 4.14.42
Refreshed all patches

Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-22 20:49:08 +02:00
Sergey Ryazanov
67a3cdcbb0 kernel: enable THIN_ARCHIVES by default
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:20 +02:00
Sergey Ryazanov
bdc2b58c4b kernel: enable FUTEX_PI by default
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:12 +02:00
Sergey Ryazanov
a08b0d0c31 kernel: enable EXPORTFS by default
OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have
OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config
of 4.14 and remove this option from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:05 +02:00
Sergey Ryazanov
978543a246 kernel: disable DRM_LIB_RANDOM by default
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:57 +02:00
Sergey Ryazanov
ead26e9db6 kernel: disable DMA_{NOOP|VIRT}_OPS by default
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:49 +02:00
Sergey Ryazanov
f928c338ad kernel: disable ARCH_WANTS_THP_SWAP by default
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:42 +02:00
Koen Vandeputte
e2aa0c3f8b kernel: bump 4.14 to 4.14.41
Refreshed all patches

Dropped upstreamed patches:
522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch
523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch
525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch

updated patches:
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch

Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718

Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-18 09:10:46 +02:00
Rafał Miłecki
02225f5763 bcm53xx: backport the first bunch of 4.18 BCM5301X patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-05-12 15:38:55 +02:00
Rafał Miłecki
ed00387dc5 bcm53xx: switch to the new/alternative SPI controller driver
This switches bcm53xx from spi-bcm53xx to the spi-bcm-qspi driver. The
later one was developed by Broadcom and is more advanced one. It
supports more modes, setting a speed, setting bits per word and uses
IRQs instead of polling.

This increases kernel size from 1808120 B to the 1811160 B (by 3040 B).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-05-07 07:56:38 +02:00
Felix Fietkau
1de74df8b9 bcm53xx: drop linux 4.4 and 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-27 15:19:19 +02:00
Kevin Darbyshire-Bryant
9aa196e0f2 kernel: bump 4.9 to 4.9.96
Refresh patches, following required reworking:

ar71xx/patches-4.9/930-chipidea-pullup.patch
layerscape/patches-4.9/302-dts-support-layercape.patch
sunxi/patches-4.9/0052-stmmac-form-4-12.patch

Fixes for CVEs:
CVE-2018-1108
CVE-2018-1092

Tested on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Arjen de Korte <build+openwrt@de-korte.org>
2018-04-26 08:53:54 +02:00
Stijn Tintel
ec1d7b9461 kernel: bump 4.14 to 4.14.34
Refresh patches.
Update patches that no longer apply:
- backport/313-netfilter-remove-defensive-check-on-malformed-packet.patch
- pending/642-net-8021q-support-hardware-flow-table-offload.patch

Compile-tested: x86/64.
Runtime-tested: x86/64.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-04-16 00:22:57 +03:00
Rafał Miłecki
f5195e72c0 kernel: mtd: bcm47xxpart: improve handling TRX partition size
This is important fix for flash parsing in some corner cases. In case
of TRX subpartition with rootfs being aligned to the flash block size it
was incorrectly registered twice. Detecting & registering it as a
standalone partition was resulting in an incorrect "firmware" partition
size and possibly broken sysupgrade.

It wasn't noticed before because "rootfs" alignment depends on a kernel
size. It can happen though - depending on the configuration and the
kernel size.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-04-12 08:25:17 +02:00
Rafał Miłecki
d9da0387f4 bcm53xx: switch to kernel 4.14
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:31:29 +02:00
Rafał Miłecki
2c140c4a3e bcm53xx: update kernel 4.14 config
There are few symbol changes but only 3 symbols were possible to set:
THERMAL_EMERGENCY_POWEROFF_DELAY_MS
CLK_BCM_SR
PHY_NS2_USB_DRD

Both new drivers don't seem to apply to Northstar so they are disabled.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:30:50 +02:00
Rafał Miłecki
707d119716 bcm53xx: fix earlycon regression in kernel 4.14
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-29 15:10:19 +02:00
Stijn Segers
41a881a8d9 Kernel: bump 4.14 to 4.14.29
Right patch version this time, sorry!

* Patch 180-usb-xhci-add-support-for-performing-fake-doorbell.patch had to be adjusted slightly because of upstream adapted code.
* Refreshed patches.

Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621, x86/64
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Rosen Penev <rosenp@gmail.com>
2018-03-23 23:49:55 +01:00
Rafał Miłecki
6c194078db bcm53xx: include patch adding WZR-900DHP LEDs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-07 17:01:07 +01:00
Stijn Segers
e72b2464b1 kernel: bump 4.4 to 4.4.119
This bumps the 4.4. kernel in master to 4.4.119.
Includes more Meltdown & Spectre mitigation.

* Refresh patches.
* Refresh x86/config for RETPOLINE.
* Deleted 8049-PCI-layerscape-Add-fsl-ls2085a-pcie-compatible-ID.patch (accepted upstream)
* Deleted 8050-PCI-layerscape-Fix-MSG-TLP-drop-setting.patch (accepted upstream)
* Deleted 650-pppoe_header_pad.patch (does not apply anymore (code was replaced)).

Bumps from 4.4.112 to 4.4.115 were handled by Kevin Darbyshire-Bryant.

Compile-tested on: ar71xx & oxnas.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Rosen Penev <rosenp@gmail.com>
2018-03-03 12:58:56 +01:00
Stijn Segers
b5469b38cd kernel: bump 4.14 to 4.14.23
This patch bumps the 4.14 kernel to .23.
- Refreshed patches.
- Deleted bcm53xx/patches-4.14/089-PCI-iproc-Fix-NULL-pointer-dereference-for-BCMA.patch. Has been accepted upstream.
- Deleted generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch. The upstream URB code was changed,
  the patch no longer applies. I discussed this with the patch author and removed it for now, we'll see how it goes.

Compile-tested on: ramips/mt7621, x86/64
Run-tested on: ramips/mt7621, x86/64

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2018-03-02 21:33:08 +01:00
Rafał Miłecki
86e5a6d985 bcm53xx: fix fallback code for picking status LED
Looking for a wrong LED file name was stopping this code from find any
LED. This affects devices with only a red/amber power LED.

Fixes: 3aaee1ba02 ("bcm53xx: failsafe support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-02-27 16:52:25 +01:00
Rafał Miłecki
3618dcbff8 bcm53xx: rename SPI driver fix to use 0xx prefix as it was accepted
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-12 23:29:48 +01:00
Rafał Miłecki
8cd3370cce bcm53xx: use upstream fix for PCI iproc driver regression
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-12 23:27:43 +01:00
Rafał Miłecki
05cb6aa69f bcm53xx: replace linux,part-probe with a proper partitions subnode
This solution is more upstream compatible as it only requires specifying
of_match_table in the parser code and doesn't depend on linux,part-probe
which is solution made generic by a LEDE downstream patch that can't be
upstreamed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-01-11 14:05:10 +01:00
Rafał Miłecki
3267ce750e bcm53xx: use iflag=skip_bytes for dd command during sysupgrade
Since BusyBox 1.25.0 dd command supports iflag=skip_bytes which allows
skipping requested amount of bytes without reducing blocksize. Thanks to
this we can leave default blocksize and let dd work more efficiently.

On Netgear R6250 "dd skip=58 iflag=skip_bytes" can be 5 times faster
than "dd bs=58 skip=1" when extracting TRX out of CHK.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 23:18:45 +01:00
Rafał Miłecki
fea884ff51 bcm53xx: add early support for kernel 4.14
Don't switch to it by default yet as it requires more testing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 23:15:32 +01:00
Rafał Miłecki
6e922a0756 bcm53xx: make USB packages compatible with kernels 4.13+
In kernels 4.13+ modules are located in an extra "broadcom" subdir.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 17:25:51 +01:00
Rafał Miłecki
9c312ef628 bcm53xx: add upstream patch fixing SPI controller driver
That patch fixes handling SPI messages with two writing transfers. It's
important when using e.g. by m25p80 driver which uses one transfer for
opcode and another one for data.

Thanks to that fix we can now drop m25p80 workaround patch. It means one
less hack and also a better flash writing performance as there is no
more data buf copying.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-12-29 15:31:22 +01:00
Kevin Darbyshire-Bryant
7b6e01d389 kernel: bump 4.9 to 4.9.72
Refresh patches.

Runtime tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-12-26 23:31:00 +01:00
Kevin Darbyshire-Bryant
b0d99b77e5 kernel: bump 4.4 to 4.4.107
Refresh patches.

Update patch that no longer applied:
oxnas/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Rosen Penev <rosenp@gmail.com>
2017-12-23 15:36:01 +01:00
Rafał Miłecki
370ce1fb48 bcm53xx: use otrx for creating TRX images
The advantage is that we don't have to specify max TRX size anymore and
otrx doesn't allocate a buffer of that size. It saves us allocating
32 MiB for every image we generate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-17 11:43:33 +01:00
Florian Fainelli
5df1f4113b bcm53xx: Fix Generic profile description
Fix the sentence describing the bcm53xx generic profile.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-24 18:39:17 -07:00
Florian Fainelli
7f0a32e21c bcm53xx: Fix SmartRG SR400AC initramfs image
The SmartRG SR400AC CFE does not accept a TRX image, just a normal
binary image.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-23 18:39:29 -07:00
Kevin Darbyshire-Bryant
886d66abcd kernel: bump 4.9 to 4.9.57
Refresh patches.
Compile-tested for ar71xx - Archer C7 v2
Runtime-tested on  ar71xx - Archer C7 v2

Fixes the following CVEs:

- CVE-2017-7518
- CVE-2017-0786
- CVE-2017-1000255
- CVE-2017-12188
- CVE-2017-15265

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-18 19:44:09 +03:00
Rafał Miłecki
f98f83eada bcm53xx: backport DTS changes up to the first 4.15 queued commits
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-10 10:22:24 +02:00
Stijn Tintel
f12c42940d kernel: bump 4.9 to 4.9.54
Refresh patches.
Remove upstreamed patches:
- ramips/0067-enable-mt7621-xhci.patch
- ramips/0085-pinmux-util.patch
- ramips/301-fix-rt3883.patch

Compile-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.
Runtime-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 20:51:03 +03:00
Kevin Darbyshire-Bryant
9c82861cb8 kernel: update 4.4 to 4.4.86
Refresh patches

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-05 08:43:39 +02:00
Stijn Tintel
046618f5da kernel: update 4.9 to 4.9.47
Refresh patches.
Compile-tested on ramips/mt7621 and x86/64.
Runtime-tested on ramips/mt7621 and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-03 22:06:28 +03:00
Rafał Miłecki
d9564d79b8 bcm53xx: backport DTS commits that setup USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-17 10:29:31 +02:00
Hauke Mehrtens
39e8ab17d5 kernel: update kernel 4.4 to version 4.4.79
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:26 +02:00
Hauke Mehrtens
88f3c63572 kernel: update kernel 4.9 to version 4.9.40
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:17 +02:00
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Koen Vandeputte
cd54b2d42b kernel: update kernel 4.9 to 4.9.37
- Refreshed all patches
- Removed upstreamed
- Adapted 4 patches:

473-fix-marvell-phy-initialization-issues.patch
-----------------------------------------------
Removed hunk 5 which got upstreamed

403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
--------------------------------------------------------------
Adapted these 2 RFC patches, merging the delta's from an upstream commit
(see below) which made it before these 2.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0

180-usb-xhci-add-support-for-performing-fake-doorbell.patch
-----------------------------------------------------------
- Moved fake_doorbell bitmask due to new item

Compile tested on: cns3xxx, imx6
Run tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-07-15 00:13:05 +02:00
Matthias Schiffer
438dcbfe74
base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN
Depending on busybox applet selection, paths of basic utiilties may differ,
and may not work as symlinks to busybox. Simply using whatever binary is
found in PATH and detecting symlinks automatically is more robust and
easier to maintain.

The list of binaries is also slightly cleaned up and duplicates are
removed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:26:32 +02:00
Matthias Schiffer
73f675415c
bcm53xx: upgrade: fix RAMFS_COPY_*
Fixes: 30f61a34b4 "base-files: always use staged sysupgrade"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-11 17:19:23 +02:00
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Stijn Tintel
f80963d4d1 kernel: update kernel 4.4 to 4.4.74
Refresh patches.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-27 07:42:50 +02:00
Koen Vandeputte
69649a1b45 kernel: update kernel 4.9 to 4.9.34
- Refreshed all patches
- Adapted 1 (0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch)

Compile tested on: brcm2708, cns3xxx, imx6
Run tested on: brcm2708, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Compile and run tested on brcm2708]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-27 07:21:03 +02:00
Rafał Miłecki
f5f1d40b5e kernel: backport MTD patch extracing TRX code to separated parser
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-06-23 11:54:20 +02:00
Rafał Miłecki
c00fbaf670 bcm53xx: include wpad-mini only on devices with (supported) wireless
Don't include wpad-mini when it's useless just like we don't include
useless wireless drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-06-08 22:25:00 +02:00
Sergey Ryazanov
68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Rafał Miłecki
0a05fbd135 bcm53xx: add support for TP-LINK Archer C5 V2
This model also contains few partitions non-discoverable partitions we
need to "protect". Othen than that it uses non-deprecated serial entry
in DTS that doesn't work with LEDE so we need to workaround it as well.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-21 18:31:38 +02:00
Rafał Miłecki
8adeb4e5d0 bcm53xx: backport MDIO bus clock initialization fix
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-11 16:04:23 +02:00
Rafał Miłecki
51abaf722c bcm53xx: backport USB 3.0 PHY patch cleaning all writes
It doesn't change any bevahior just cleanes up the code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-05-11 16:04:23 +02:00
Rafał Miłecki
23d7c4d632 bcm53xx: enable Northstar thermal driver
It allows monitoring CPU temp and will shutdown system on critical
value.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-20 22:45:05 +02:00
Rafał Miłecki
b0fcb9b85c bcm53xx: backport DT patches for serial, thermal and MDIO
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-04-20 22:45:05 +02:00
Rafał Miłecki
2ebfdabfbd bcm53xx: put kernel into TRX when building initramfs images
Many (most?) devices can't boot raw kernel using tftp and probably none
allows flashing it. It's way more usable to have TRX with kernel
containing initrams as such an image can be actually flashed.

An exception are Buffalo devices which have recovery mode with support
for booting kernels over TFTP. For them keep building default images.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-27 10:41:36 +02:00
Rafał Miłecki
8fae77fc9b kernel: update bcma including recent changes for 4.12
This adds support for describing GPIO chips placed on PCIe cards. Thanks
to this we get working 2.4 GHz LED on Tenda AC9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-21 09:58:05 +01:00
Rafał Miłecki
0694d08c84 bcm53xx: switch to kernel 4.9
With iproc regression fixed and GIC interrupts in DTS updated it seems
we can safely start using 4.9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-18 23:00:56 +01:00
Rafał Miłecki
3a2e735b96 bcm53xx: backport BCM5301X patches
This fixes GIC interrupts (required before switching to 4.9), adds few
new entires & introduces DTS for Archer C5.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-18 18:32:53 +01:00
Rafał Miłecki
cd0f9900a4 bcm53xx: parepare for building more Linksys images
We still can't enable them by default without proper TRX support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-12 16:24:13 +01:00
Rafał Miłecki
cc3c50eb22 bcm53xx: prepare for building Archer C5 V2 image
Don't enable it yet as kernel needs to be updated first.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-11 12:33:53 +01:00
Rafał Miłecki
e58ea0a80d bcm53xx: use upstream fix for iproc regression
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-10 22:26:20 +01:00
Rafał Miłecki
edda26dc4f bcm53xx: fix memory corruption caused by iproc PCE controller driver
This is a simple revert of upstream patch for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-09 11:06:55 +01:00
Rafał Miłecki
9209511d61 bcm53xx: backport Broadcom's iProc QSPI driver
This driver has been added instead of improving spi-bcm53xx. It has some
advantages: allows SPI speed control & hopefully doesn't have bug that
was stopping us from using multiple SPI messages for writing flash data.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-01 07:02:17 +01:00
Rafał Miłecki
2677b66f9b bcm53xx: backport accepted BCM5301X and BCM53573 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-28 22:52:46 +01:00
Rafał Miłecki
a732f69f85 bcm53xx: enable CLK_BCM_NSP for kernel 4.9
This is required to get booting kernel.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-28 16:43:51 +01:00
Rafał Miłecki
75b530a51b bcm53xx: add kernel 4.9 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-20 14:12:30 +01:00
Hauke Mehrtens
236840eb47 kernel: update kernel 4.9 to version 4.9.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-16 00:46:23 +01:00
Rafał Miłecki
2fd81681f9 bcm53xx: include Broadcom PHY driver in the kernel
Initial idea was to use package with this PHY driver for devices that
need it. Unfortunately this can't work as bgmac is built-in and PHY
probing happens before loading modules - it results in PHY subsystem
picking default (generic) PHY driver.

There were two ways of solving this:
1) Making bcm53xx use bgmac as module
xor
2) Built-in Broadcom PHY driver

After some quick discussion it seems we can simply built-in the driver
as increased kenel size is relatively small (1805 B).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 18:11:17 +01:00
Rafał Miłecki
ec10bb18f5 bcm53xx: add missing system.sh include
It's needed for macaddr_add.

Fixes: 50efd403e6 ("bcm53xx: set WAN MAC address to don't share one with LAN interface")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 11:47:02 +01:00
Rafał Miłecki
6b01f0f196 bcm53xx: set Netgear R8000 USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 20:24:19 +01:00
Rafał Miłecki
fb18c3c8ff bcm53xx: refresh Linux 4.4 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 17:21:09 +01:00
Rafał Miłecki
f24cb34239 bcm53xx: image: use one style of adding TARGET_DEVICES entries
It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:59:30 +01:00
Rafał Miłecki
26bc05eda9 bcm53xx: move bcm47xx_sprom driver to 4.4 specific directory
In kernel 4.9 it's already present so we don't want to overwite it (with
older & API incompatible version).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:18:20 +01:00