kernel: bump 4.14 to 4.14.78

Refreshed all patches.

Remove upstreamed:
- 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
This commit is contained in:
Koen Vandeputte 2018-10-22 14:11:59 +02:00
parent 9c42391c0d
commit bc3d47cd12
6 changed files with 11 additions and 59 deletions

View File

@ -4,11 +4,11 @@ LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .124
LINUX_VERSION-4.9 = .135
LINUX_VERSION-4.14 = .77
LINUX_VERSION-4.14 = .78
LINUX_KERNEL_HASH-3.18.124 = 25d2a5abd627534a1e51d028890c184aad8e628c345c5fe0cc0f9d7c31b7a5a3
LINUX_KERNEL_HASH-4.9.135 = e023b0bbe9ea7fc56aa57210342dd18ea3e0900ee207226df1523c6d7df154ce
LINUX_KERNEL_HASH-4.14.77 = 0496f4e194cadbe23f27e6f4b9c3cd264448983780b73b30f7f05c92273fa6f8
LINUX_KERNEL_HASH-4.14.78 = f4da4dc0f079e420e1c1b8c71312eaa5415b08be847aa224a61d8af6a6e74c6c
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

View File

@ -47,7 +47,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
}
static inline void emac_tx_enable(struct emac_instance *dev)
@@ -2865,7 +2865,7 @@ static int emac_init_config(struct emac_
@@ -2870,7 +2870,7 @@ static int emac_init_config(struct emac_
/* PHY mode needs some decoding */
dev->phy_mode = of_get_phy_mode(np);
if (dev->phy_mode < 0)
@ -56,7 +56,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
/* Check EMAC version */
if (of_device_is_compatible(np, "ibm,emac4sync")) {
@@ -3168,7 +3168,7 @@ static int emac_probe(struct platform_de
@@ -3173,7 +3173,7 @@ static int emac_probe(struct platform_de
printk(KERN_INFO "%s: EMAC-%d %pOF, MAC %pM\n",
ndev->name, dev->cell_index, np, ndev->dev_addr);

View File

@ -1,48 +0,0 @@
From 08e39982ef64f800fd1f9b9b92968d14d5fafa82 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 17 Sep 2018 17:22:40 +0200
Subject: net: emac: fix fixed-link setup for the RTL8363SB switch
On the Netgear WNDAP620, the emac ethernet isn't receiving nor
xmitting any frames from/to the RTL8363SB (identifies itself
as a RTL8367RB).
This is caused by the emac hardware not knowing the forced link
parameters for speed, duplex, pause, etc.
This begs the question, how this was working on the original
driver code, when it was necessary to set the phy_address and
phy_map to 0xffffffff. But I guess without access to the old
PPC405/440/460 hardware, it's not possible to know.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/ibm/emac/core.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -2671,12 +2671,17 @@ static int emac_init_phy(struct emac_ins
if (of_phy_is_fixed_link(np)) {
int res = emac_dt_mdio_probe(dev);
- if (!res) {
- res = of_phy_register_fixed_link(np);
- if (res)
- mdiobus_unregister(dev->mii_bus);
+ if (res)
+ return res;
+
+ res = of_phy_register_fixed_link(np);
+ dev->phy_dev = of_phy_find_device(np);
+ if (res || !dev->phy_dev) {
+ mdiobus_unregister(dev->mii_bus);
+ return res ? res : -EINVAL;
}
- return res;
+ emac_adjust_link(dev->ndev);
+ put_device(&dev->phy_dev->mdio.dev);
}
return 0;
}

View File

@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1210,6 +1210,18 @@ static const struct flash_info *spi_nor_
@@ -1215,6 +1215,18 @@ static const struct flash_info *spi_nor_
}
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);

View File

@ -8,7 +8,7 @@
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -1189,11 +1190,12 @@ static const struct flash_info spi_nor_i
@@ -1194,11 +1195,12 @@ static const struct flash_info spi_nor_i
{ },
};
@ -23,7 +23,7 @@
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
@@ -1204,10 +1206,16 @@ static const struct flash_info *spi_nor_
@@ -1209,10 +1211,16 @@ static const struct flash_info *spi_nor_
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
@ -42,7 +42,7 @@
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
@@ -2667,7 +2675,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -2672,7 +2680,7 @@ int spi_nor_scan(struct spi_nor *nor, co
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
@ -51,7 +51,7 @@
if (IS_ERR_OR_NULL(info))
return -ENOENT;
@@ -2678,7 +2686,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -2683,7 +2691,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (name && info->id_len) {
const struct flash_info *jinfo;

View File

@ -10,7 +10,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2651,6 +2651,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -2656,6 +2656,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
@ -18,7 +18,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
int ret;
int i;
@@ -2726,7 +2727,12 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -2731,7 +2732,12 @@ int spi_nor_scan(struct spi_nor *nor, co
spi_nor_wait_till_ready(nor);
}