kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)

Refreshed all patches.

This bump contains upstream commits which seem to avoid (not properly fix)
the errors as seen in FS#2305 and FS#2297

Altered patches:
- 403-net-mvneta-convert-to-phylink.patch
- 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
This commit is contained in:
Koen Vandeputte 2019-06-11 18:25:36 +02:00
parent f2f7cc67e5
commit a7e68927d0
27 changed files with 378 additions and 1129 deletions

View File

@ -7,11 +7,11 @@ ifdef CONFIG_TESTING_KERNEL
endif
LINUX_VERSION-4.9 = .181
LINUX_VERSION-4.14 = .123
LINUX_VERSION-4.14 = .125
LINUX_VERSION-4.19 = .48
LINUX_KERNEL_HASH-4.9.181 = 8fcd223e11cba322801bc38cdb8b581d64c0115f585dcb6604de8561b574fced
LINUX_KERNEL_HASH-4.14.123 = 25f58cb56bde388ac9bcee984f5f2d0ca094b0a8af6b92ad1f5b2fd0e6725b85
LINUX_KERNEL_HASH-4.14.125 = 3e3dbc20215a28385bf46e2d0b8d9019df38ef1ee677e5e8870c7c3cde2ab318
LINUX_KERNEL_HASH-4.19.48 = 01d0db4f10cc8e384241a605e29413e32c442aa6853c116877538b07c16893fa
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

View File

@ -24,7 +24,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -372,10 +372,14 @@ static int xhci_try_enable_msi(struct us
@@ -370,10 +370,14 @@ static int xhci_try_enable_msi(struct us
free_irq(hcd->irq, hcd);
hcd->irq = 0;

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -277,6 +277,8 @@ void __init plat_time_init(void)
@@ -283,6 +283,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_clk_rate / 2;
}

View File

@ -10,7 +10,7 @@
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -190,16 +190,20 @@ unsigned int get_c0_compare_int(void)
@@ -196,16 +196,20 @@ unsigned int get_c0_compare_int(void)
void __init plat_mem_setup(void)
{
@ -31,7 +31,7 @@
if (mips_machtype != ATH79_MACH_GENERIC_OF) {
ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
@@ -295,17 +299,21 @@ static int __init ath79_setup(void)
@@ -301,17 +305,21 @@ static int __init ath79_setup(void)
arch_initcall(ath79_setup);

View File

@ -457,7 +457,7 @@
memcpy(p, foc->val, foc->len);
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -537,7 +537,7 @@ static struct sk_buff *add_grec(struct s
@@ -548,7 +548,7 @@ static struct sk_buff *add_grec(struct s
if (!skb)
return NULL;
psrc = skb_put(skb, sizeof(__be32));

View File

@ -208,7 +208,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
#include <asm/bootinfo.h>
#include <asm/idle.h>
@@ -305,6 +306,11 @@ void __init plat_time_init(void)
@@ -311,6 +312,11 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_clk_rate / 2;
}

View File

@ -938,7 +938,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
#define ATH79_SYS_TYPE_LEN 64
@@ -230,25 +229,21 @@ void __init plat_mem_setup(void)
@@ -236,25 +235,21 @@ void __init plat_mem_setup(void)
else if (fw_passed_dtb)
__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
@ -973,7 +973,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
{
struct device_node *np;
struct clk *clk;
@@ -278,66 +273,12 @@ static void __init ath79_of_plat_time_in
@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_in
clk_put(clk);
}

View File

@ -40,7 +40,7 @@ it on BCM4708 family.
/* called during probe() after chip reset completes */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -168,6 +168,49 @@ int xhci_start(struct xhci_hcd *xhci)
@@ -166,6 +166,49 @@ int xhci_start(struct xhci_hcd *xhci)
return ret;
}
@ -90,7 +90,7 @@ it on BCM4708 family.
/*
* Reset a halted HC.
*
@@ -551,10 +594,20 @@ static int xhci_init(struct usb_hcd *hcd
@@ -549,10 +592,20 @@ static int xhci_init(struct usb_hcd *hcd
static int xhci_run_finished(struct xhci_hcd *xhci)
{
@ -114,7 +114,7 @@ it on BCM4708 family.
xhci->shared_hcd->state = HC_STATE_RUNNING;
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
@@ -564,6 +617,10 @@ static int xhci_run_finished(struct xhci
@@ -562,6 +615,10 @@ static int xhci_run_finished(struct xhci
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB3 roothub");
return 0;

View File

@ -95,7 +95,7 @@ Signed-off-by: Oliver Gjoneski <ogjoneski@gmail.com>
size_t pagelist_size;
struct scatterlist *scatterlist, *sg;
int dma_buffers;
@@ -417,10 +436,16 @@ create_pagelist(char __user *buf, size_t
@@ -426,10 +445,16 @@ create_pagelist(char __user *buf, size_t
/* Allocate enough storage to hold the page pointers and the page
** list
*/
@ -116,7 +116,7 @@ Signed-off-by: Oliver Gjoneski <ogjoneski@gmail.com>
vchiq_log_trace(vchiq_arm_log_level, "create_pagelist - %pK",
pagelist);
@@ -441,6 +466,7 @@ create_pagelist(char __user *buf, size_t
@@ -450,6 +475,7 @@ create_pagelist(char __user *buf, size_t
pagelistinfo->pagelist = pagelist;
pagelistinfo->pagelist_buffer_size = pagelist_size;
pagelistinfo->dma_addr = dma_addr;

View File

@ -84,7 +84,7 @@ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -362,3 +362,30 @@
@@ -366,3 +366,30 @@
#if GCC_VERSION >= 50100
#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
#endif
@ -117,7 +117,7 @@ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
+
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -283,4 +283,22 @@ struct ftrace_likely_data {
@@ -287,4 +287,22 @@ struct ftrace_likely_data {
# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
#endif

View File

@ -55,9 +55,6 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
create mode 100644 include/uapi/linux/tc_act/tc_ctinfo.h
create mode 100644 net/sched/act_ctinfo.c
diff --git a/include/net/tc_act/tc_ctinfo.h b/include/net/tc_act/tc_ctinfo.h
new file mode 100644
index 000000000000..d6a688571672
--- /dev/null
+++ b/include/net/tc_act/tc_ctinfo.h
@@ -0,0 +1,28 @@
@ -89,8 +86,6 @@ index 000000000000..d6a688571672
+#define to_ctinfo(a) ((struct tcf_ctinfo *)a)
+
+#endif /* __NET_TC_CTINFO_H */
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index 46c506615f4a..408b02fbb34a 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -66,7 +66,8 @@ enum {
@ -103,9 +98,6 @@ index 46c506615f4a..408b02fbb34a 100644
};
#define TCA_ID_MAX __TCA_ID_MAX
diff --git a/include/uapi/linux/tc_act/tc_ctinfo.h b/include/uapi/linux/tc_act/tc_ctinfo.h
new file mode 100644
index 000000000000..da803e05a89b
--- /dev/null
+++ b/include/uapi/linux/tc_act/tc_ctinfo.h
@@ -0,0 +1,34 @@
@ -143,8 +135,6 @@ index 000000000000..da803e05a89b
+};
+
+#endif
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index e70ed26485a2..962d90f72f54 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -808,6 +808,19 @@ config NET_ACT_CONNMARK
@ -167,8 +157,6 @@ index e70ed26485a2..962d90f72f54 100644
config NET_ACT_SKBMOD
tristate "skb data modification action"
depends on NET_CLS_ACT
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 9e43a4721ef8..44ee5b87b895 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
@ -179,9 +167,6 @@ index 9e43a4721ef8..44ee5b87b895 100644
obj-$(CONFIG_NET_ACT_SKBMOD) += act_skbmod.o
obj-$(CONFIG_NET_ACT_IFE) += act_ife.o
obj-$(CONFIG_NET_IFE_SKBMARK) += act_meta_mark.o
diff --git a/net/sched/act_ctinfo.c b/net/sched/act_ctinfo.c
new file mode 100644
index 000000000000..e65344e32801
--- /dev/null
+++ b/net/sched/act_ctinfo.c
@@ -0,0 +1,394 @@
@ -579,6 +564,3 @@ index 000000000000..e65344e32801
+MODULE_AUTHOR("Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>");
+MODULE_DESCRIPTION("Conntrack mark to DSCP restoring");
+MODULE_LICENSE("GPL");
--
2.20.1 (Apple Git-117)

View File

@ -3344,6 +3344,7 @@ CONFIG_NMI_LOG_BUF_SHIFT=13
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
# CONFIG_NOZOMI is not set
# CONFIG_NO_BOOTMEM is not set
# CONFIG_NO_HZ is not set

View File

@ -12,8 +12,6 @@ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
arch/powerpc/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de3b07c7be30..53f87983fb42 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -199,6 +199,7 @@ config PPC
@ -24,6 +22,3 @@ index de3b07c7be30..53f87983fb42 100644
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_KRETPROBES
--
2.20.1

View File

@ -3166,7 +3166,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
err = dpni_enable(priv->mc_io, 0, priv->mc_token);
if (err < 0) {
netdev_err(net_dev, "dpni_enable() failed\n");
@@ -1047,51 +1355,20 @@ static int dpaa2_eth_open(struct net_dev
@@ -1047,48 +1355,17 @@ static int dpaa2_eth_open(struct net_dev
link_state_err:
enable_err:
@ -3181,8 +3181,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
- */
-static u32 drain_channel(struct dpaa2_eth_priv *priv,
- struct dpaa2_eth_channel *ch)
+static int dpaa2_eth_stop(struct net_device *net_dev)
{
-{
- u32 drained = 0, total = 0;
-
- do {
@ -3193,11 +3192,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
-
- return total;
-}
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+ int dpni_enabled = 0;
+ int retries = 10, i;
+ int err = 0;
-
-static u32 drain_ingress_frames(struct dpaa2_eth_priv *priv)
-{
- struct dpaa2_eth_channel *ch;
@ -3212,20 +3207,18 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
- return drained;
-}
-
-static int dpaa2_eth_stop(struct net_device *net_dev)
-{
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
static int dpaa2_eth_stop(struct net_device *net_dev)
{
struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- int dpni_enabled;
- int retries = 10;
- u32 drained;
-
- netif_tx_stop_all_queues(net_dev);
- netif_carrier_off(net_dev);
+ netif_tx_stop_all_queues(net_dev);
+ netif_carrier_off(net_dev);
+ int dpni_enabled = 0;
+ int retries = 10, i;
+ int err = 0;
/* Loop while dpni_disable() attempts to drain the egress FQs
* and confirm them back to us.
netif_tx_stop_all_queues(net_dev);
netif_carrier_off(net_dev);
@@ -1105,56 +1382,24 @@ static int dpaa2_eth_stop(struct net_dev
} while (dpni_enabled && --retries);
if (!retries) {
@ -4496,7 +4489,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) {
dev_err(dev, "error adding key extraction rule, too many rules?\n");
@@ -2020,49 +2966,107 @@ static int dpaa2_eth_set_hash(struct net
@@ -2020,12 +2966,10 @@ static int dpaa2_eth_set_hash(struct net
}
key->type = DPKG_EXTRACT_FROM_HDR;
@ -4506,27 +4499,37 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
- key->extract.from_hdr.field = hash_fields[i].cls_field;
+ key->extract.from_hdr.field = dist_fields[i].cls_field;
cls_cfg.num_extracts++;
+ }
+
+ dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL);
+ if (!dma_mem)
+ return -ENOMEM;
+
+ err = dpni_prepare_key_cfg(&cls_cfg, dma_mem);
+ if (err) {
+ dev_err(dev, "dpni_prepare_key_cfg error %d\n", err);
-
- priv->rx_hash_fields |= hash_fields[i].rxnfc_field;
}
dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL);
@@ -2035,36 +2979,96 @@ static int dpaa2_eth_set_hash(struct net
err = dpni_prepare_key_cfg(&cls_cfg, dma_mem);
if (err) {
dev_err(dev, "dpni_prepare_key_cfg error %d\n", err);
- goto err_prep_key;
+ goto free_key;
+ }
+
+ /* Prepare for setting the rx dist */
}
- memset(&dist_cfg, 0, sizeof(dist_cfg));
-
/* Prepare for setting the rx dist */
- dist_cfg.key_cfg_iova = dma_map_single(dev, dma_mem,
- DPAA2_CLASSIFIER_DMA_SIZE,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, dist_cfg.key_cfg_iova)) {
+ key_iova = dma_map_single(dev, dma_mem, DPAA2_CLASSIFIER_DMA_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, key_iova)) {
+ dev_err(dev, "DMA mapping failed\n");
+ err = -ENOMEM;
dev_err(dev, "DMA mapping failed\n");
err = -ENOMEM;
- goto err_dma_map;
+ goto free_key;
+ }
+
}
- dist_cfg.dist_size = dpaa2_eth_queue_count(priv);
- dist_cfg.dist_mode = DPNI_DIST_MODE_HASH;
+ if (type == DPAA2_ETH_RX_DIST_HASH) {
+ if (dpaa2_eth_has_legacy_dist(priv))
+ err = config_legacy_hash_key(priv, key_iova);
@ -4535,17 +4538,24 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
+ } else {
+ err = config_cls_key(priv, key_iova);
+ }
+
- err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg);
- dma_unmap_single(dev, dist_cfg.key_cfg_iova,
- DPAA2_CLASSIFIER_DMA_SIZE, DMA_TO_DEVICE);
- if (err)
- dev_err(dev, "dpni_set_rx_tc_dist() error %d\n", err);
+ dma_unmap_single(dev, key_iova, DPAA2_CLASSIFIER_DMA_SIZE,
+ DMA_TO_DEVICE);
+ if (!err && type == DPAA2_ETH_RX_DIST_HASH)
+ priv->rx_hash_fields = rx_hash_fields;
+
-err_dma_map:
-err_prep_key:
+free_key:
+ kfree(dma_mem);
+ return err;
+}
+
kfree(dma_mem);
return err;
}
+int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags)
+{
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
@ -4571,70 +4581,43 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
+{
+ struct device *dev = priv->net_dev->dev.parent;
+ int err;
- priv->rx_hash_fields |= hash_fields[i].rxnfc_field;
+
+ /* Check if we actually support Rx flow classification */
+ if (dpaa2_eth_has_legacy_dist(priv)) {
+ dev_dbg(dev, "Rx cls not supported by current MC version\n");
+ return -EOPNOTSUPP;
}
- dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL);
- if (!dma_mem)
- return -ENOMEM;
-
- err = dpni_prepare_key_cfg(&cls_cfg, dma_mem);
- if (err) {
- dev_err(dev, "dpni_prepare_key_cfg error %d\n", err);
- goto err_prep_key;
+ }
+
+ if (!dpaa2_eth_fs_enabled(priv)) {
+ dev_dbg(dev, "Rx cls disabled in DPNI options\n");
+ return -EOPNOTSUPP;
}
- memset(&dist_cfg, 0, sizeof(dist_cfg));
-
- /* Prepare for setting the rx dist */
- dist_cfg.key_cfg_iova = dma_map_single(dev, dma_mem,
- DPAA2_CLASSIFIER_DMA_SIZE,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, dist_cfg.key_cfg_iova)) {
- dev_err(dev, "DMA mapping failed\n");
- err = -ENOMEM;
- goto err_dma_map;
+ }
+
+ if (!dpaa2_eth_hash_enabled(priv)) {
+ dev_dbg(dev, "Rx cls disabled for single queue DPNIs\n");
+ return -EOPNOTSUPP;
}
- dist_cfg.dist_size = dpaa2_eth_queue_count(priv);
- dist_cfg.dist_mode = DPNI_DIST_MODE_HASH;
+ }
+
+ /* If there is no support for masking in the classification table,
+ * we don't set a default key, as it will depend on the rules
+ * added by the user at runtime.
+ */
+ if (!dpaa2_eth_fs_mask_enabled(priv))
+ goto out;
- err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg);
- dma_unmap_single(dev, dist_cfg.key_cfg_iova,
- DPAA2_CLASSIFIER_DMA_SIZE, DMA_TO_DEVICE);
+
+ err = dpaa2_eth_set_cls(priv->net_dev, DPAA2_ETH_DIST_ALL);
if (err)
- dev_err(dev, "dpni_set_rx_tc_dist() error %d\n", err);
+ if (err)
+ return err;
-err_dma_map:
-err_prep_key:
- kfree(dma_mem);
- return err;
+
+out:
+ priv->rx_cls_enabled = 1;
+
+ return 0;
}
+}
+
/* Bind the DPNI to its needed objects and resources: buffer pool, DPIOs,
* frame queues and channels
*/
@@ -2080,6 +3084,7 @@ static int bind_dpni(struct dpaa2_eth_pr
pools_params.num_dpbp = 1;
pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id;

View File

@ -1312,7 +1312,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
xhci->quirks |= XHCI_BROKEN_PORT_PED;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1972,10 +1972,12 @@ static int finish_td(struct xhci_hcd *xh
@@ -1976,10 +1976,12 @@ static int finish_td(struct xhci_hcd *xh
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
@ -1325,7 +1325,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
u32 trb_comp_code;
int ep_index;
@@ -1998,14 +2000,30 @@ static int finish_td(struct xhci_hcd *xh
@@ -2002,14 +2004,30 @@ static int finish_td(struct xhci_hcd *xh
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
@ -1363,7 +1363,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
while (ep_ring->dequeue != td->last_trb)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1597,13 +1597,38 @@ static int xhci_urb_dequeue(struct usb_h
@@ -1595,13 +1595,38 @@ static int xhci_urb_dequeue(struct usb_h
ret = -ENOMEM;
goto done;
}

View File

@ -112,7 +112,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ret = PTR_ERR(hcd->usb_phy);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -612,11 +612,7 @@ int xhci_run(struct usb_hcd *hcd)
@@ -610,11 +610,7 @@ int xhci_run(struct usb_hcd *hcd)
"// Set the interrupt modulation register");
temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;

View File

@ -17,11 +17,9 @@ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
arch/powerpc/platforms/85xx/Makefile | 1 +
4 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e2a5a932c24a..925140f8350b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -156,6 +156,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
@@ -156,6 +156,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
@ -29,7 +27,7 @@ index e2a5a932c24a..925140f8350b 100644
src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y))
@@ -335,7 +336,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm8555
@@ -335,7 +336,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_KSI8560) += cuImage.ksi8560
@ -38,8 +36,6 @@ index e2a5a932c24a..925140f8350b 100644
# Board ports in arch/powerpc/platform/86xx/Kconfig
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 76fe3ccfd381..96fd853a1ed0 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -302,6 +302,11 @@ adder875-redboot)
@ -54,8 +50,6 @@ index 76fe3ccfd381..96fd853a1ed0 100755
simpleboot-virtex405-*)
platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
binary=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 68920d42b4bc..477782740f0e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -170,6 +170,17 @@ config STX_GP3
@ -76,11 +70,9 @@ index 68920d42b4bc..477782740f0e 100644
config TQM8540
bool "TQ Components TQM8540"
help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index d1dd0dca5ebf..d0dab29a33eb 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
@ -88,6 +80,3 @@ index d1dd0dca5ebf..d0dab29a33eb 100644
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_PPA8548) += ppa8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
--
2.20.1

View File

@ -1,6 +1,6 @@
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -835,6 +835,14 @@ config CMDLINE_FORCE
@@ -836,6 +836,14 @@ config CMDLINE_FORCE
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.

View File

@ -10,7 +10,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -248,6 +248,184 @@ static unsigned int sfp_check(void *buf,
@@ -264,6 +264,184 @@ static unsigned int sfp_check(void *buf,
return check;
}
@ -195,7 +195,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/* Helpers */
static void sfp_module_tx_disable(struct sfp *sfp)
{
@@ -416,6 +594,7 @@ static int sfp_sm_mod_probe(struct sfp *
@@ -432,6 +610,7 @@ static int sfp_sm_mod_probe(struct sfp *
char sn[17];
char date[9];
char rev[5];
@ -203,7 +203,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
u8 check;
int err;
@@ -459,10 +638,83 @@ static int sfp_sm_mod_probe(struct sfp *
@@ -475,10 +654,83 @@ static int sfp_sm_mod_probe(struct sfp *
rev[4] = '\0';
memcpy(sn, sfp->id.ext.vendor_sn, 16);
sn[16] = '\0';

View File

@ -928,10 +928,10 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
return 0;
err_netdev:
@@ -4386,16 +4492,14 @@ err_netdev:
@@ -4384,16 +4490,14 @@ err_netdev:
mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
1 << pp->id);
}
err_free_stats:
+ if (pp->phylink)
+ phylink_destroy(pp->phylink);
free_percpu(pp->stats);
@ -947,7 +947,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
@@ -4407,7 +4511,6 @@ err_free_netdev:
@@ -4405,7 +4509,6 @@ err_free_netdev:
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
@ -955,7 +955,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
@@ -4415,10 +4518,8 @@ static int mvneta_remove(struct platform
@@ -4413,10 +4516,8 @@ static int mvneta_remove(struct platform
clk_disable_unprepare(pp->clk);
free_percpu(pp->ports);
free_percpu(pp->stats);
@ -967,7 +967,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
free_netdev(dev);
if (pp->bm_priv) {
@@ -4470,9 +4571,6 @@ static int mvneta_resume(struct device *
@@ -4468,9 +4569,6 @@ static int mvneta_resume(struct device *
return err;
}

View File

@ -159,7 +159,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sched/signal.h>
@@ -2201,6 +2202,9 @@ static int __ethtool_get_module_info(str
@@ -2212,6 +2213,9 @@ static int __ethtool_get_module_info(str
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
@ -169,7 +169,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
if (phydev && phydev->drv && phydev->drv->module_info)
return phydev->drv->module_info(phydev, modinfo);
@@ -2235,6 +2239,9 @@ static int __ethtool_get_module_eeprom(s
@@ -2246,6 +2250,9 @@ static int __ethtool_get_module_eeprom(s
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;

View File

@ -25,8 +25,8 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+#include <linux/sfp.h>
enum {
MV_PCS_BASE_T = 0x0000,
@@ -38,6 +40,11 @@ enum {
MV_PMA_BOOT = 0xc050,
@@ -41,6 +43,11 @@ enum {
MV_AN_RESULT_SPD_10000 = BIT(15),
};
@ -38,7 +38,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
u16 mask, u16 bits)
{
@@ -56,17 +63,52 @@ static int mv3310_modify(struct phy_devi
@@ -59,8 +66,25 @@ static int mv3310_modify(struct phy_devi
return ret < 0 ? ret : 1;
}
@ -62,10 +62,11 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
{
+ struct mv3310_priv *priv;
u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
int ret;
if (!phydev->is_c45 ||
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
@@ -78,9 +102,27 @@ static int mv3310_probe(struct phy_devic
return -ENODEV;
}
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
@ -91,7 +92,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
/*
* Resetting the MV88X3310 causes it to become non-responsive. Avoid
* setting the reset bit(s).
@@ -78,6 +120,7 @@ static int mv3310_soft_reset(struct phy_
@@ -92,6 +134,7 @@ static int mv3310_soft_reset(struct phy_
static int mv3310_config_init(struct phy_device *phydev)
{
@ -99,7 +100,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
u32 mask;
int val;
@@ -166,6 +209,14 @@ static int mv3310_config_init(struct phy
@@ -180,6 +223,14 @@ static int mv3310_config_init(struct phy
phydev->supported &= mask;
phydev->advertising &= phydev->supported;
@ -114,7 +115,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
return 0;
}
@@ -349,12 +400,13 @@ static struct phy_driver mv3310_drivers[
@@ -363,12 +414,13 @@ static struct phy_driver mv3310_drivers[
SUPPORTED_FIBRE |
SUPPORTED_10000baseT_Full |
SUPPORTED_Backplane,

View File

@ -14,7 +14,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1148,6 +1148,7 @@ static int sfp_remove(struct platform_de
@@ -1164,6 +1164,7 @@ static int sfp_remove(struct platform_de
static const struct of_device_id sfp_of_match[] = {
{ .compatible = "sff,sfp", },

View File

@ -13,7 +13,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -489,7 +489,7 @@ static void sfp_sm_phy_detach(struct sfp
@@ -505,7 +505,7 @@ static void sfp_sm_phy_detach(struct sfp
sfp->mod_phy = NULL;
}
@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
{
struct phy_device *phy;
int err;
@@ -499,11 +499,11 @@ static void sfp_sm_probe_phy(struct sfp
@@ -515,11 +515,11 @@ static void sfp_sm_probe_phy(struct sfp
phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
if (phy == ERR_PTR(-ENODEV)) {
dev_info(sfp->dev, "no PHY detected\n");
@ -36,7 +36,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
err = sfp_add_phy(sfp->sfp_bus, phy);
@@ -511,11 +511,13 @@ static void sfp_sm_probe_phy(struct sfp
@@ -527,11 +527,13 @@ static void sfp_sm_probe_phy(struct sfp
phy_device_remove(phy);
phy_device_free(phy);
dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
@ -51,7 +51,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
static void sfp_sm_link_up(struct sfp *sfp)
@@ -561,14 +563,9 @@ static void sfp_sm_fault(struct sfp *sfp
@@ -577,14 +579,9 @@ static void sfp_sm_fault(struct sfp *sfp
static void sfp_sm_mod_init(struct sfp *sfp)
{
@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
/* Setting the serdes link mode is guesswork: there's no
* field in the EEPROM which indicates what mode should
@@ -582,7 +579,22 @@ static void sfp_sm_mod_init(struct sfp *
@@ -598,7 +595,22 @@ static void sfp_sm_mod_init(struct sfp *
if (sfp->id.base.e1000_base_t ||
sfp->id.base.e100_base_lx ||
sfp->id.base.e100_base_fx)

View File

@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -980,7 +980,10 @@ void phy_state_machine(struct work_struc
@@ -913,7 +913,10 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@ -23,7 +23,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
break;
}
@@ -1067,7 +1070,10 @@ void phy_state_machine(struct work_struc
@@ -1000,7 +1003,10 @@ void phy_state_machine(struct work_struc
phy_link_up(phydev);
} else {
phydev->state = PHY_NOLINK;
@ -35,7 +35,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
if (phy_interrupt_is_valid(phydev))
@@ -1077,7 +1083,10 @@ void phy_state_machine(struct work_struc
@@ -1010,7 +1016,10 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;

View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -431,6 +431,9 @@ uart_get_baud_rate(struct uart_port *por
@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por
break;
}