Commit Graph

1170 Commits

Author SHA1 Message Date
Gabor Juhos
4cf6e53ccc ar71xx: rb2011: update RGMII RX/TX delay values
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36795
2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793 ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36794
2013-05-30 17:38:17 +00:00
Gabor Juhos
d6554bf66a ar71xx: add kernel support for the RB2011UAS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36792
2013-05-30 17:38:13 +00:00
Gabor Juhos
91d7c3efc1 ar71xx: add kernel support for the TP-LINK Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36788
2013-05-30 16:23:07 +00:00
Gabor Juhos
93ce462b7e ar71xx: set eth0 mac address to match bottom label of the OM2P LC
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36723
2013-05-26 16:02:29 +00:00
Felix Fietkau
144cfb65a4 ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36631
2013-05-13 19:13:33 +00:00
Gabor Juhos
10b3ca5ccb ar71xx: add kernel support for Netgear WNDAP360
Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36578
2013-05-08 17:03:34 +00:00
Gabor Juhos
9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
Gabor Juhos
5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
Gabor Juhos
f7da2127ab ar71xx: fix ethernet LEDs on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
Gabor Juhos
cd5cca4ba8 ar71xx: fix USB power GPIO on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
Gabor Juhos
4daefc9480 ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
Gabor Juhos
35d41db979 ar71xx: rw2458n - Use eeprom (art) from wifi card
Use eeprom (art) from included wifi card, not hard coded in flash.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36037
2013-03-15 14:35:50 +00:00
Gabor Juhos
8deffcba7e ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779

Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36036
2013-03-15 14:35:48 +00:00
Gabor Juhos
14ca5fc98b ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35966
2013-03-11 19:52:54 +00:00
Gabor Juhos
902dd27383 ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

SVN-Revision: 35961
2013-03-11 15:55:20 +00:00
Gabor Juhos
5c5e1c0a9d ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35960
2013-03-11 15:55:19 +00:00
Gabor Juhos
a7525f5f5d ar71xx: add kernel support for dir-835-a1
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
Gabor Juhos
1d55249d7c ar71xx: use backported QCA955x patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35878
2013-03-04 11:48:15 +00:00
Luka Perkov
a5ebfc79ba ar71xx: rework changes from r35840
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
Gabor Juhos
4491da2bd4 ar71xx: update MAC address assignment for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35855
2013-03-03 12:47:37 +00:00
Gabor Juhos
200aa6db83 ar71xx: fixes leds for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35854
2013-03-03 12:47:33 +00:00
Luka Perkov
107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Gabor Juhos
bcac3c5569 ar71xx: fix MAC address assignment on the DIR-825-Bx boards
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730
2013-02-21 17:58:21 +00:00
Gabor Juhos
4341b11f3e ar71xx: remove __dev{init,exit} annotations from kernel files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35687
2013-02-19 20:52:06 +00:00
Gabor Juhos
7a709573d7 ar71xx: add kernel support for the Mikrotik RB951G board
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
Jonas Gorski
f07a33afc2 ar71xx: register the micro sd card reader on RB493G
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
2013-02-10 12:31:38 +00:00
Gabor Juhos
6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
2013-02-08 09:34:53 +00:00
Gabor Juhos
7c87d28054 ar71xx: fixes whitespaces for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
2013-02-02 15:02:19 +00:00
Gabor Juhos
31af0dc186 ar71xx: fix mac address calculation on the OpenMesh MR600
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35446
2013-02-02 08:47:41 +00:00
Gabor Juhos
8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
2013-02-01 15:50:42 +00:00
Gabor Juhos
fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
2013-02-01 15:50:37 +00:00
Gabor Juhos
5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
2013-02-01 15:50:29 +00:00
Gabor Juhos
800da21cb1 ar71xx: add kernel support for dir-825-c1
[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35401
2013-01-29 22:50:50 +00:00
Gabor Juhos
5ca187570f ar71xx: add kernel support for Atheros AP132 Reference Board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35395
2013-01-29 19:12:30 +00:00
Gabor Juhos
8a9d92f125 ar71xx: fix ethernet device registration for the QCA9556 SoC
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35394
2013-01-29 19:12:28 +00:00
Gabor Juhos
df15e5cd61 ar71xx: enable fast flash read on dual-flash devices
This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35392
2013-01-29 19:12:25 +00:00
Gabor Juhos
ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
Gabor Juhos
66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
Gabor Juhos
5dec87afef ar71xx: fix ethernet device registration for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
Gabor Juhos
4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
Gabor Juhos
a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos
0767605d17 ar71xx: add kernel support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
Gabor Juhos
bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74 ar71xx: add ap91_pci_init_simple helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
Gabor Juhos
1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
SVN-Revision: 33575
2012-09-27 20:05:42 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU
SVN-Revision: 33539
2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1
SVN-Revision: 33538
2012-09-25 12:57:38 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040
Should fix #12211. Compile tested only.

SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011
SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller
SVN-Revision: 33387
2012-09-13 07:26:25 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751
SVN-Revision: 33348
2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines
SVN-Revision: 33347
2012-09-09 14:05:28 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011
SVN-Revision: 33345
2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
SVN-Revision: 33343
2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation
SVN-Revision: 33342
2012-09-09 14:05:17 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751
SVN-Revision: 33338
2012-09-08 17:51:56 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.

SVN-Revision: 33310
2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
2012-08-29 10:37:54 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
2012-08-27 14:55:26 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board
SVN-Revision: 33231
2012-08-22 20:09:13 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c
SVN-Revision: 33227
2012-08-22 12:42:59 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
2012-08-22 09:10:24 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
2012-07-05 16:25:26 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
2012-07-05 08:26:53 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs
SVN-Revision: 32606
2012-07-05 08:26:47 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
2012-07-03 15:24:01 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board
SVN-Revision: 32459
2012-06-19 11:51:17 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h
SVN-Revision: 32455
2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs
SVN-Revision: 32454
2012-06-19 10:13:41 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
SVN-Revision: 32336
2012-06-13 12:54:22 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572)
SVN-Revision: 32093
2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x
SVN-Revision: 32092
2012-06-06 17:24:09 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
SVN-Revision: 31925
2012-05-27 21:02:41 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos
3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
2012-04-29 18:29:24 +00:00
Gabor Juhos
408de85883 ar71xx: use ap91_pci_init for RB751{,G}
SVN-Revision: 31356
2012-04-19 21:31:48 +00:00
Gabor Juhos
0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup
SVN-Revision: 31355
2012-04-19 21:31:43 +00:00
Gabor Juhos
78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper
SVN-Revision: 31354
2012-04-19 21:31:42 +00:00
Gabor Juhos
5c9ca38e47 ar71xx: add sanity checks to decode_rle
Also use -EINVAL instead of -1.

SVN-Revision: 31353
2012-04-19 21:31:40 +00:00
Gabor Juhos
e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
2012-04-06 06:45:07 +00:00
Gabor Juhos
b77217d963 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
2012-03-27 19:38:17 +00:00
Gabor Juhos
6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
2012-03-27 19:38:07 +00:00
Gabor Juhos
61ee283899 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
2012-03-27 19:38:05 +00:00
Gabor Juhos
1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
2012-03-27 19:38:04 +00:00
Gabor Juhos
87e4ec687b ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
2012-03-27 19:38:01 +00:00
Gabor Juhos
f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
SVN-Revision: 31102
2012-03-27 19:37:51 +00:00
Gabor Juhos
8a2e4b49de ar71xx: add initial support for RB750GL
SVN-Revision: 31025
2012-03-19 15:57:04 +00:00
Gabor Juhos
d19f3dd512 ar71xx: make rb750_latch_change 'static void'
SVN-Revision: 31024
2012-03-19 15:57:03 +00:00
Gabor Juhos
5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data
SVN-Revision: 31023
2012-03-19 15:57:01 +00:00
Gabor Juhos
8a471efe01 ar71xx: add platform data for the RB750 NAND driver
SVN-Revision: 31022
2012-03-19 15:56:59 +00:00
Gabor Juhos
e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0
SVN-Revision: 31017
2012-03-19 11:11:20 +00:00
Gabor Juhos
6036151187 ar71xx: add support for the jjPlus JA76PF2 board
SVN-Revision: 30957
2012-03-16 18:00:34 +00:00
Gabor Juhos
a680662391 ar71xx: change LED name prefix on the jjplus boards
SVN-Revision: 30956
2012-03-16 18:00:26 +00:00
Gabor Juhos
1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration
SVN-Revision: 30922
2012-03-13 17:29:33 +00:00
Gabor Juhos
66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed
SVN-Revision: 30913
2012-03-12 20:38:58 +00:00
Gabor Juhos
8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch
SVN-Revision: 30912
2012-03-12 20:38:57 +00:00
Gabor Juhos
2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N
SVN-Revision: 30849
2012-03-07 19:50:53 +00:00
Gabor Juhos
d72bde99cd ar71xx: merge files-3.2 to files
SVN-Revision: 30405
2012-02-10 08:19:31 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39
SVN-Revision: 29867
2012-01-22 22:38:11 +00:00
Gabor Juhos
ef1c53b7b7 ar71xx: change board id of the UniFi board
SVN-Revision: 29849
2012-01-22 13:51:50 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
SVN-Revision: 29713
2012-01-11 18:00:50 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board
The WLAN LEDs are not working yet.

SVN-Revision: 29680
2012-01-07 19:36:35 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
2012-01-07 17:24:44 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
2012-01-04 21:13:54 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices
SVN-Revision: 29659
2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards
SVN-Revision: 29635
2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
SVN-Revision: 29631
2011-12-31 15:02:46 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N
SVN-Revision: 29624
2011-12-31 13:54:11 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
SVN-Revision: 29593
2011-12-21 01:27:48 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2
SVN-Revision: 29568
2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
2011-12-18 22:20:17 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface
SVN-Revision: 29556
2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board
SVN-Revision: 29555
2011-12-15 22:25:35 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
SVN-Revision: 29553
2011-12-15 22:25:30 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x
SVN-Revision: 29550
2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data
SVN-Revision: 29549
2011-12-15 22:25:11 +00:00
Gabor Juhos
d1f7783612 ar71xx: fix mac addresses on jjPlus devices
SVN-Revision: 29538
2011-12-15 13:25:18 +00:00
Gabor Juhos
b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board
SVN-Revision: 29535
2011-12-14 20:54:10 +00:00
Gabor Juhos
66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X
SVN-Revision: 29534
2011-12-14 20:54:07 +00:00
Felix Fietkau
7076d74b21 ar71xx: fix gpio count for ar7241/ar7242
SVN-Revision: 29532
2011-12-14 20:47:24 +00:00
Felix Fietkau
b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
SVN-Revision: 29531
2011-12-14 20:21:42 +00:00
Felix Fietkau
3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h
SVN-Revision: 29515
2011-12-13 15:00:43 +00:00
Gabor Juhos
2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
2011-12-13 14:59:43 +00:00
Gabor Juhos
058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
2011-12-13 14:59:40 +00:00
Felix Fietkau
48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h
SVN-Revision: 29509
2011-12-13 13:33:44 +00:00
Gabor Juhos
4ca2d86493 ar71xx: use RedBoot parser on PB44
SVN-Revision: 29501
2011-12-11 15:52:47 +00:00
Gabor Juhos
bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices
SVN-Revision: 29458
2011-12-05 21:10:58 +00:00
Gabor Juhos
0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac
SVN-Revision: 29457
2011-12-05 21:10:55 +00:00
Gabor Juhos
ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
SVN-Revision: 29456
2011-12-05 18:21:15 +00:00
Felix Fietkau
1f809532de ar71xx: add preliminary support for wzr-hp-g450h
SVN-Revision: 29441
2011-12-05 14:20:51 +00:00
Felix Fietkau
d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well
SVN-Revision: 29440
2011-12-05 14:20:44 +00:00
Gabor Juhos
4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling
SVN-Revision: 29434
2011-12-05 13:03:54 +00:00
Gabor Juhos
7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards
Also remove static partition maps.

SVN-Revision: 29416
2011-12-03 18:13:31 +00:00
Gabor Juhos
fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards
SVN-Revision: 29414
2011-12-03 18:13:25 +00:00
Gabor Juhos
9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board
SVN-Revision: 29413
2011-12-03 18:13:23 +00:00
Gabor Juhos
67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board
Also remove static mtd partition definitions.

SVN-Revision: 29412
2011-12-03 18:13:20 +00:00
Gabor Juhos
f188f1bad5 ar71xx: add support for Ubiquiti AirRouter
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
2011-12-01 22:49:02 +00:00
Gabor Juhos
f20797306a ar71xx: modify phy mask of the WP543 board
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
2011-11-24 20:09:43 +00:00
Gabor Juhos
c20d7378e5 ar71xx: fix wndr3800 machine name
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
2011-11-24 20:09:38 +00:00
Gabor Juhos
9990523a0f ar71xx: set GE0 phy_mask for AR933x
SVN-Revision: 29274
2011-11-20 11:30:10 +00:00
Gabor Juhos
f27548448b ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
2011-11-14 17:43:15 +00:00
Gabor Juhos
6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
2011-11-14 17:43:14 +00:00
Gabor Juhos
0c1d3617d7 ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
2011-11-14 17:43:13 +00:00
Gabor Juhos
aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
2011-11-14 17:43:11 +00:00
Gabor Juhos
12dae96097 ar71xx: fix a compiler warning
SVN-Revision: 29110
2011-11-14 13:07:47 +00:00
Gabor Juhos
5ae0fd802c ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
2011-11-14 13:07:45 +00:00
Gabor Juhos
e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
2011-11-14 11:49:53 +00:00
Gabor Juhos
3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
2011-11-14 11:49:51 +00:00
Gabor Juhos
42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
2011-11-14 11:49:49 +00:00
Gabor Juhos
c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
2011-11-14 11:49:47 +00:00
Gabor Juhos
cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
2011-11-14 07:38:09 +00:00
Gabor Juhos
defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
2011-11-14 07:38:07 +00:00
Gabor Juhos
6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
2011-11-14 07:38:05 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
2011-11-13 12:48:01 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
2011-11-13 11:27:03 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.

SVN-Revision: 29012
2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
2011-11-13 11:26:54 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus
SVN-Revision: 28984
2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
2011-11-12 10:54:17 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
2011-11-12 10:54:15 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
2011-11-12 10:54:08 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board
SVN-Revision: 28805
2011-11-07 12:59:10 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board
SVN-Revision: 28803
2011-11-07 12:59:07 +00:00
Gabor Juhos
4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions
SVN-Revision: 28800
2011-11-07 12:59:03 +00:00
Gabor Juhos
4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4
SVN-Revision: 28709
2011-11-01 14:38:12 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
Gabor Juhos
21e651c9a1 ar71xx: add AR933X GMAC register defines
SVN-Revision: 28705
2011-11-01 11:20:50 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
2011-10-27 07:54:47 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board
Patch-by: Lukas Kuna

SVN-Revision: 28295
2011-09-23 19:56:39 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function
SVN-Revision: 28276
2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper
SVN-Revision: 28275
2011-09-21 11:47:50 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries
SVN-Revision: 28273
2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries
SVN-Revision: 28272
2011-09-21 11:47:45 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037)
SVN-Revision: 28182
2011-09-06 05:38:23 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242
SVN-Revision: 28124
2011-08-29 21:23:46 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240
SVN-Revision: 27975
2011-08-13 22:30:14 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922)
SVN-Revision: 27959
2011-08-11 13:52:40 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Felix Fietkau
9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
SVN-Revision: 27756
2011-07-24 14:40:35 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Felix Fietkau
9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
SVN-Revision: 27739
2011-07-24 08:02:20 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x
SVN-Revision: 27703
2011-07-20 12:04:34 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
The config option has been removed in 2.6.39.

SVN-Revision: 27320
2011-06-30 12:15:33 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
2011-06-29 08:57:37 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type
SVN-Revision: 27309
2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts
SVN-Revision: 27308
2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts
SVN-Revision: 27307
2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations
SVN-Revision: 27306
2011-06-29 08:57:27 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
SVN-Revision: 27282
2011-06-25 13:48:47 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver
SVN-Revision: 27222
2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X
SVN-Revision: 27221
2011-06-19 13:17:50 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code
SVN-Revision: 27165
2011-06-13 08:12:38 +00:00
Gabor Juhos
ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
Gabor Juhos
750af1522b ar71xx: init external_reset for AR933X
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
Gabor Juhos
f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
Gabor Juhos
34ff32a6eb ar71xx: export SoC revision
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
Felix Fietkau
4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
Gabor Juhos
f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
Gabor Juhos
8beff081eb ar71xx: register UART for the AR933X SoCs
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
Gabor Juhos
b460bc6f12 ar71xx: add serial driver for the AR933X UART
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00
Gabor Juhos
c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs
SVN-Revision: 27064
2011-05-31 22:53:39 +00:00
Gabor Juhos
e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs
SVN-Revision: 27063
2011-05-31 22:53:37 +00:00
Gabor Juhos
e0a0f3796a ar71xx: enable USB support for the AR933x SoCs
SVN-Revision: 27062
2011-05-31 22:53:36 +00:00
Gabor Juhos
677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
SVN-Revision: 27061
2011-05-31 22:53:35 +00:00
Gabor Juhos
7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization
SVN-Revision: 27059
2011-05-31 22:53:32 +00:00
Gabor Juhos
e6fde61bec ar71xx: don't register 8250 UART on the AR933x SoCs
SVN-Revision: 27058
2011-05-31 22:53:31 +00:00
Gabor Juhos
8f7541a044 ar71xx: enable GPIO support for the AR933x SoCs
SVN-Revision: 27057
2011-05-31 22:53:30 +00:00
Gabor Juhos
e11b9c8371 ar71xx: add AR933x specific frequency initialization code
SVN-Revision: 27056
2011-05-31 22:53:29 +00:00
Gabor Juhos
0bf4478d37 ar71xx: add AR933x specific early_printk support
SVN-Revision: 27055
2011-05-31 22:53:27 +00:00
Gabor Juhos
6b3ca9ef0b ar71xx: add preliminary support for the Atheros AR933x SoCs
SVN-Revision: 27054
2011-05-31 22:53:26 +00:00
Gabor Juhos
be97e2a043 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
SVN-Revision: 27048
2011-05-31 22:53:19 +00:00
Gabor Juhos
5d5f72415e ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
SVN-Revision: 27045
2011-05-31 22:53:15 +00:00
Matteo Croce
17e257925f ar71xx: don't probe the LAN PHY
SVN-Revision: 26924
2011-05-17 11:15:24 +00:00
Matteo Croce
2ea528d1d0 ar71xx: add link detection on Ubiquiti devices WAN port
SVN-Revision: 26891
2011-05-14 23:31:50 +00:00
Matteo Croce
99d1d4f795 ar71xx: cosmetic fixes
SVN-Revision: 26889
2011-05-14 23:08:00 +00:00
Gabor Juhos
9b5036a29d ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

SVN-Revision: 26862
2011-05-08 21:38:51 +00:00
Gabor Juhos
869f3cb718 ar71xx: remove superfluous fifo_cfg overrides
SVN-Revision: 26859
2011-05-08 21:38:46 +00:00
Gabor Juhos
c39e5b9360 ar71xx: override wmac device name for the AR934x SoCs
SVN-Revision: 26840
2011-05-07 09:23:32 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
SVN-Revision: 26779
2011-04-28 21:27:42 +00:00
Felix Fietkau
36aecb08b8 ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
SVN-Revision: 26777
2011-04-28 19:30:49 +00:00
Gabor Juhos
fa9f45f345 ar71xx: fix build error w/o CONFIG_PCI
SVN-Revision: 26606
2011-04-12 13:14:56 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
Gabor Juhos
ef4c1d49a6 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
SVN-Revision: 26595
2011-04-11 17:37:08 +00:00
Gabor Juhos
4711dea8ff ar71xx: fix AR934X_WMAC_SIZE
SVN-Revision: 26594
2011-04-11 17:37:03 +00:00
Gabor Juhos
8586e61b00 ar71xx: fix section mismatch
SVN-Revision: 26562
2011-04-09 18:47:55 +00:00
Gabor Juhos
a8bf5e3cdb ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq
Also initialize that for each SoC and print its value along with the
other frequencies.

SVN-Revision: 26561
2011-04-09 18:47:52 +00:00
Gabor Juhos
5573d6eb28 ar71xx: show the SoC type earlier
SVN-Revision: 26560
2011-04-09 18:47:50 +00:00
Gabor Juhos
ab4c3b3a1c ar71xx: cleanup SoC detection code
SVN-Revision: 26559
2011-04-09 18:47:49 +00:00
Gabor Juhos
3310c70702 ar71xx: Fix mac address offset for AR934x
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

SVN-Revision: 26557
2011-04-09 18:47:42 +00:00
Gabor Juhos
8f889f9250 ar71xx: add DB120 board specific PCI initialization
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26523
2011-04-07 20:53:41 +00:00
Gabor Juhos
a0c3d49064 ar71xx: register WMAC device on the DB120 board
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26522
2011-04-07 20:53:37 +00:00
Gabor Juhos
428888faec ar71xx: add support for the built-in WMAC of the AR934x
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26521
2011-04-07 20:53:34 +00:00
Gabor Juhos
14b42c44ec ar71xx: add initial support for the Atheros DB120 board
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26518
2011-04-07 20:53:19 +00:00
Gabor Juhos
e4555809c7 ar71xx: enable PCI for the AR934[24] SoCs
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26515
2011-04-07 20:53:05 +00:00
Gabor Juhos
4f395745af ar71xx: enable USB support for the AR934x SoCs
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26514
2011-04-07 20:53:03 +00:00
Gabor Juhos
25693b4769 ar71xx: enable GPIO support for the AR934x SoCs
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26513
2011-04-07 20:53:00 +00:00
Gabor Juhos
334a5ec36e ar71xx: add AR934x specific glue for ar7100_device{start,stop}
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26512
2011-04-07 20:52:57 +00:00
Gabor Juhos
ccd3ebd309 ar71xx: add AR934x specific UART clock initialization
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26511
2011-04-07 20:52:53 +00:00
Gabor Juhos
91470edada ar71xx: add AR934x specific glue for IRQ initialization
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26510
2011-04-07 20:52:49 +00:00
Gabor Juhos
3b209880bc ar71xx: add initial support for the AR934x SoCs
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26509
2011-04-07 20:52:45 +00:00
Felix Fietkau
98c78c13db ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection
SVN-Revision: 26394
2011-04-02 00:47:33 +00:00
Gabor Juhos
8eb616de82 ar71xx: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26119
2011-03-13 15:08:31 +00:00
Felix Fietkau
5bddd70a37 Revert "ar71xx: add missing gpio_set_debounce function" - wrong target
SVN-Revision: 25854
2011-03-03 16:21:23 +00:00
Felix Fietkau
57a14f4e15 ar71xx: add missing gpio_set_debounce function
SVN-Revision: 25848
2011-03-03 10:33:35 +00:00
Gabor Juhos
256169cbd0 ar71xx: add rtl8366s initvals for the DIR-825 board
SVN-Revision: 25121
2011-01-26 20:35:47 +00:00
Gabor Juhos
67c3e0bf7e ar71xx: add support for the WNDR3700v2 board
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
Jo-Philipp Wich
18ed5bca9b fix null pointer access in mach-dir-600-a1.c machine setup (#8671)
SVN-Revision: 25043
2011-01-18 18:04:50 +00:00
Gabor Juhos
b67bbfe287 ar71xx: fix wlan LED on the TL-WR741 board
* Patch from #8630

SVN-Revision: 24963
2011-01-11 08:20:47 +00:00
Gabor Juhos
dd53effe15 ar71xx: fix wrong names of the WPS LED/button
Reported-by: Nuno Gonçalves

SVN-Revision: 24961
2011-01-10 18:15:47 +00:00
Gabor Juhos
0de8689b70 ar71xx: use spinlock in ar71xx_device_{start,stop}
SVN-Revision: 24929
2011-01-08 11:28:32 +00:00
Felix Fietkau
6acfae9379 ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24723
2010-12-19 11:56:42 +00:00
Gabor Juhos
cafe08a1b2 ar71xx: remove stray semicolons
SVN-Revision: 24651
2010-12-17 17:57:20 +00:00
Gabor Juhos
01c76bf128 ar71xx: fix WLAN LEDs on the DIR-825 board
SVN-Revision: 24650
2010-12-17 17:10:21 +00:00
Gabor Juhos
c1d3a23d19 ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
SVN-Revision: 24649
2010-12-17 17:10:19 +00:00
Gabor Juhos
8390b7dc9b ar71xx: UBNT Secondary MAC address duplicate fix
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
2010-12-17 17:10:01 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos
e421d2575f ar71xx: UBNT M-Series MAC address fix
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24611
2010-12-15 19:55:47 +00:00
Gabor Juhos
6c1ace2f28 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards
SVN-Revision: 24569
2010-12-14 18:01:04 +00:00
Gabor Juhos
a7750dae90 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
SVN-Revision: 24568
2010-12-14 18:01:00 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
Felix Fietkau
8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues
SVN-Revision: 24236
2010-12-04 01:32:15 +00:00
Gabor Juhos
9971dfe059 ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage
r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 24036
2010-11-19 07:24:00 +00:00
Gabor Juhos
f4d5c885e4 ar71xx: return statements does not need parenthesis
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23979
2010-11-12 18:51:38 +00:00
Gabor Juhos
e244e1c7cd ar71xx: fix inline attribute location
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23978
2010-11-12 18:51:21 +00:00
Gabor Juhos
acd8ad4de5 ar71xx: wrap long lines
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23977
2010-11-12 18:51:04 +00:00
Gabor Juhos
eef802855a ar71xx: fix trailing statements location
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23976
2010-11-12 18:50:47 +00:00
Gabor Juhos
500fac1735 ar71xx: fix whitespaces nits
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23975
2010-11-12 18:50:29 +00:00
Claudio Mignanti
20b2a4417a Add support for Ubiquiti UniFi AP
SVN-Revision: 23904
2010-11-06 21:08:48 +00:00
Felix Fietkau
91b6c63adc ar71xx: Set eth1 MAC address from EEPROM for WNDR3700
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23876
2010-11-04 18:46:07 +00:00
Felix Fietkau
fc28e1cd7d ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai)
SVN-Revision: 23875
2010-11-04 18:39:49 +00:00
Felix Fietkau
b4e2c09b46 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues
SVN-Revision: 23822
2010-11-03 14:55:53 +00:00
Felix Fietkau
9e2d1a194d ar71xx: use the new ar7240 switch driver for tl-wa901nd as well
SVN-Revision: 23576
2010-10-21 18:42:22 +00:00
Jo-Philipp Wich
a680385396 remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel
SVN-Revision: 23451
2010-10-14 23:08:10 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
Felix Fietkau
8511c6b16c AP96: Fix LAN/WAN setup
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
2010-09-28 22:55:14 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
Gabor Juhos
b831ebdde9 ar71xx: AR724[12] requires different USB setup
SVN-Revision: 23135
2010-09-27 14:53:57 +00:00
Gabor Juhos
cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241
SVN-Revision: 23132
2010-09-27 14:53:49 +00:00
Gabor Juhos
b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file
SVN-Revision: 23131
2010-09-27 14:53:46 +00:00
Gabor Juhos
4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
2010-09-27 14:53:43 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
Felix Fietkau
0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND
SVN-Revision: 22935
2010-09-05 16:17:06 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
Gabor Juhos
47f8fd1dde ar71xx: rewrite SPI drivers for the RB4xx boards
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

SVN-Revision: 22863
2010-08-31 20:13:47 +00:00
Gabor Juhos
7bc5a672c1 ar71xx: change mac address initialization
SVN-Revision: 22700
2010-08-18 16:00:28 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
Felix Fietkau
65899cfa49 ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do
SVN-Revision: 22401
2010-07-27 21:04:43 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
Felix Fietkau
bced5d7d74 ar71xx: set default values for the fifo cfg registers on AR724x
SVN-Revision: 22303
2010-07-20 01:54:11 +00:00
Gabor Juhos
95e09cccd8 ar71xx: in-flash macs and eeprom for mach-eap7660d
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22187
2010-07-15 07:36:52 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
Gabor Juhos
08c2e29018 ar71xx: avoid duplicated 'board' parameter in kernel command line
SVN-Revision: 21805
2010-06-14 20:02:44 +00:00
Gabor Juhos
9789f0215a ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype
SVN-Revision: 21764
2010-06-12 13:20:39 +00:00
Gabor Juhos
adb0a95df1 ar71xx: fix phy_mask for the RB450
SVN-Revision: 21743
2010-06-09 19:48:35 +00:00
Gabor Juhos
d55ebf3a8a ar71xx: fix phy_mask on the RB433 for the IP17xx driver
SVN-Revision: 21728
2010-06-08 20:19:18 +00:00
Gabor Juhos
90e2b1ad6b ar71xx: fix 2.6.34 build errors
SVN-Revision: 21698
2010-06-07 09:18:13 +00:00
Gabor Juhos
115f845e53 ar71xx: fix nbg460n mtd partitions
This fixes the NBG460N/550N/550NH mtd partitions.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21443
2010-05-14 08:37:58 +00:00
Gabor Juhos
fca9b7ebad ar71xx: remove config partition from the mtd map on the MZK-W300NH board
This space can be used to extend the rootfs_data partition.

SVN-Revision: 21173
2010-04-26 18:28:04 +00:00
Gabor Juhos
77b2354fcd ar71xx: fix firmware partition size on the MZK-W04NU board
SVN-Revision: 21172
2010-04-26 18:28:01 +00:00
Felix Fietkau
9848d38aed ar71xx: fix a wifi card stability issue
when we receive a pci/ahb interrupt, we need to flush pending data for dma
from the device, otherwise the tx path may get stuck if the completion flag
of the dma descriptor is not updated at the time the tx interrupt arrives.

SVN-Revision: 21143
2010-04-24 17:24:11 +00:00
Gabor Juhos
10ed3b23a6 ar71xx: reduce button threshold value on the NBG460 board
SVN-Revision: 21076
2010-04-21 19:07:23 +00:00
Gabor Juhos
9933d34770 ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
SVN-Revision: 21075
2010-04-21 19:07:19 +00:00
Gabor Juhos
693ea524c1 ar71xx: adding support for zyxel nbg460n/550n/550nh boards
This patch adds support for the zyxel nbg460n/550n/550nh routers.
Currently this only works if a second stage bootloader is also flashed,
as the used switch needs extra initialization.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 20990
2010-04-18 16:24:12 +00:00
Gabor Juhos
dd7304ec6d ar71xx: update phy masks for the Planex boards
This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org

SVN-Revision: 20754
2010-04-09 08:40:14 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
Cc: backfire@openwrt.org

SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
Felix Fietkau
df463abb18 ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version)
SVN-Revision: 20725
2010-04-06 00:12:50 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
Felix Fietkau
7983e442e1 ar71xx: fix pci on ar7241/ar7242
SVN-Revision: 20530
2010-03-28 00:36:37 +00:00
Felix Fietkau
9c0f21a5b9 ar71xx: fix the wan port on pb92
SVN-Revision: 20529
2010-03-28 00:36:04 +00:00
Felix Fietkau
2cc215f121 ar71xx: reset the mdio bus on ar7241/ar7242
SVN-Revision: 20528
2010-03-28 00:35:44 +00:00
Felix Fietkau
0b6e32a7b0 ar71xx: add basic kernel support for pb92
SVN-Revision: 20495
2010-03-26 22:35:52 +00:00
Felix Fietkau
aa3ff31b95 ar71xx: add support for ar7241 and ar7242
SVN-Revision: 20494
2010-03-26 22:35:41 +00:00
Felix Fietkau
4e10c56551 ar71xx: fix pci link detection for ar724x
SVN-Revision: 20493
2010-03-26 22:35:27 +00:00
Andy Boyett
681054333e wrt400n: lan ports don't need the ar8216 workaround
SVN-Revision: 20491
2010-03-26 19:09:11 +00:00
Gabor Juhos
120b1d8699 ar71xx: use the RB411 setup for the RB411U
SVN-Revision: 20359
2010-03-21 18:16:24 +00:00
Gabor Juhos
9a1031ce6d ar71xx: change PHY select logic, and update phy_masks
SVN-Revision: 20358
2010-03-21 18:16:07 +00:00
Gabor Juhos
18aa68d368 ar71xx: check returned value of ioremap in ar71xx_pcibios_setup
SVN-Revision: 20288
2010-03-18 19:19:19 +00:00
Gabor Juhos
73f7a1c224 ar71xx: optimize register access in ar71xx_pci.c
SVN-Revision: 20287
2010-03-18 19:19:16 +00:00
Gabor Juhos
1dedaf30a6 ar71xx: optimize register access in irq.c
SVN-Revision: 20286
2010-03-18 19:19:13 +00:00
Gabor Juhos
2438a03ce4 ar71xx: optimize register access in ar724x_pci.c
SVN-Revision: 20285
2010-03-18 19:19:10 +00:00
Gabor Juhos
d02975eb0d ar71xx: introduce global ar724x_pci_ctrl_base variable
SVN-Revision: 20284
2010-03-18 19:19:07 +00:00
Gabor Juhos
b051a3b784 ar71xx: add error handling to ar724x_pcibios_init
SVN-Revision: 20283
2010-03-18 19:19:03 +00:00
Gabor Juhos
695e989c6f ar71xx: move ar724x_pci_* helpers to ar724x-pci.c
SVN-Revision: 20282
2010-03-18 19:18:58 +00:00
Gabor Juhos
5f109ef2f3 ar71xx: move PCI intterupt handling code to pci-ar7{1xx,24x}.c
SVN-Revision: 20281
2010-03-18 19:18:54 +00:00
Gabor Juhos
4d32460353 ar71xx: use set_irq_chained_handler for the PCI IRQs
SVN-Revision: 20280
2010-03-18 19:18:50 +00:00
Gabor Juhos
1b8137eefc ar71xx: merge AR71XX_IRQ_CPU_{PCI,WMAC} into AR71XX_IRQ_CPU_IP2
SVN-Revision: 20279
2010-03-18 19:18:46 +00:00
Gabor Juhos
58911deda5 ar71xx: remove unnecessary includes from setup.c
SVN-Revision: 20278
2010-03-18 19:18:41 +00:00
Gabor Juhos
ca49e09c9a ar71xx: fix ar724x_pci_wr{,_nf} helpers
SVN-Revision: 20277
2010-03-18 19:18:36 +00:00
Gabor Juhos
d350e4cf40 ar71xx: fix semantics error in the __ar71xx_gpio_get_value function.
* Thanks to Pascal Dornier

SVN-Revision: 20247
2010-03-16 19:53:25 +00:00
Gabor Juhos
74556519e3 ar71xx: optimize GPIO code
SVN-Revision: 20242
2010-03-16 14:02:31 +00:00
Felix Fietkau
0849a208ce ar71xx: fix oprofile support
SVN-Revision: 20150
2010-03-11 18:48:57 +00:00
Gabor Juhos
b21308313e ar71xx: override lan port names on the RB750
SVN-Revision: 20096
2010-03-09 18:05:48 +00:00
Gabor Juhos
45ff7289fe ar71xx: allow overriding of the lan port names on AP91 based boards
SVN-Revision: 20095
2010-03-09 18:05:45 +00:00
Gabor Juhos
d58a367083 ar71xx: add NAND driver for the RB750
SVN-Revision: 20054
2010-03-08 12:10:23 +00:00
Gabor Juhos
6c1be20c2a ar71xx: add ar71xx_gpio_function_setup
SVN-Revision: 20053
2010-03-08 12:10:14 +00:00
Gabor Juhos
6600fab893 ar71xx: add LED driver for the RB750
SVN-Revision: 20051
2010-03-08 12:10:01 +00:00
Gabor Juhos
a1a9727fbf ar71xx: add latch handling code for the RB750
SVN-Revision: 20050
2010-03-08 12:09:49 +00:00
Gabor Juhos
5e8c8818ed ar71xx: add preliminary support for the RouterBOARD 750
SVN-Revision: 20029
2010-03-07 05:41:01 +00:00
Gabor Juhos
10ad4ea96c ar71xx: rename mach-rb-4xx.c to mach-rb4xx.c, and change Kconfig symbol
SVN-Revision: 20027
2010-03-07 05:40:56 +00:00
Gabor Juhos
97c35a7dde ar71xx: don't init PCI irqs on the AR7240 if the PCIe subsystem are in reset
SVN-Revision: 20007
2010-03-05 20:29:29 +00:00
Gabor Juhos
347c5bc7fc ar71xx: use COMMAND_LINE_SIZE
SVN-Revision: 19947
2010-03-02 13:36:04 +00:00
Gabor Juhos
b41c276df4 ar71xx: register DSA switch for the AP91 based boards
SVN-Revision: 19928
2010-03-01 07:34:43 +00:00
Gabor Juhos
30a2da99a1 ar71xx: register RTL8366RB switch on the TL-WR1043NB board
Thanks to Andrew Tarabaras.

SVN-Revision: 19839
2010-02-24 13:39:18 +00:00
Gabor Juhos
f771c35033 ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND board
Thanks to Andrew Tarabaras

SVN-Revision: 19835
2010-02-24 13:38:51 +00:00
Gabor Juhos
f68a1d0a63 ar71xx: fix mac addresses on the DIR-600 rev. A1 board
SVN-Revision: 19752
2010-02-19 11:52:42 +00:00
Gabor Juhos
f792c3647e ar71xx: fix wireless mac address on the TL-WR741ND
SVN-Revision: 19751
2010-02-19 11:52:39 +00:00
Gabor Juhos
ccbfcba859 ar71xx: move AP91 specific ethernet initialization into a separate file
SVN-Revision: 19750
2010-02-19 11:52:36 +00:00
Gabor Juhos
da5cacba76 ar71xx: add missing GPIO LED for the WNDR3700 board
Signed-off-by: Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19744
2010-02-19 11:52:19 +00:00
Gabor Juhos
b00fe580ed ar71xx: fix polarity of GPIO buttons on the WNDR3700 board
Signed-off-by: Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19743
2010-02-19 11:52:15 +00:00
Gabor Juhos
0017e832cc ar71xx: fix WLAN mac address on the TL-WR1043ND
SVN-Revision: 19573
2010-02-10 20:01:20 +00:00
Gabor Juhos
0cbc5f678d ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
SVN-Revision: 19565
2010-02-09 16:27:35 +00:00
Gabor Juhos
20df2bf825 ar71xx: merge generic machine code into setup.c
SVN-Revision: 19325
2010-01-25 14:24:48 +00:00
Gabor Juhos
2b5ba9073f rtl8366_smi: move RTL8366S driver into a separate file
SVN-Revision: 19279
2010-01-22 17:38:07 +00:00
Gabor Juhos
71d0a7a7bf ar71xx: fix ethernet mac address on the WZR-HP-G300NH
SVN-Revision: 19216
2010-01-18 09:01:44 +00:00
Gabor Juhos
3789aa82ac ar71xx: fix phy interface selection for the RB-450G
Patch from: https://forum.openwrt.org/viewtopic.php?pid=95865#p95865

SVN-Revision: 19185
2010-01-17 14:33:26 +00:00
Gabor Juhos
e02f1581d0 Fix Routerboard 411ar on board wireless
This patch adds the appropriate interrupt for slot 0 pin 1 of the Routerboard 411ar (RB411 with on board Atheros wireless).

Signed-off-by: Andrew Bates abates@omeganetserv.com

SVN-Revision: 19184
2010-01-17 14:33:23 +00:00
Gabor Juhos
cb80426641 ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH
SVN-Revision: 19150
2010-01-15 12:08:03 +00:00
Gabor Juhos
3dc1073b53 ar71xx: reduce button threshold values
SVN-Revision: 19116
2010-01-13 10:18:30 +00:00
Gabor Juhos
58301cdeb8 ar71xx: add support for the D-Link DIR-600 rev. A1 board
SVN-Revision: 19100
2010-01-11 08:02:10 +00:00
Gabor Juhos
a37ae4f128 ar71xx: add missing flash partition for the DIR-825
SVN-Revision: 19075
2010-01-08 13:35:25 +00:00
Gabor Juhos
d2ff313775 ar71xx: don't include nvram.h for the WRT400N
SVN-Revision: 19055
2010-01-06 15:24:04 +00:00
Gabor Juhos
de6bbad010 ar71xx: init PCI on the WRT400N board (thanks to Ben Pfountz for testing)
SVN-Revision: 19047
2010-01-05 20:12:12 +00:00
Gabor Juhos
953ff0cf43 ar71xx: fix bi-color QSS LED on the TL-WR941ND v2 board
SVN-Revision: 18988
2010-01-01 19:40:04 +00:00
Gabor Juhos
f8b7b8ee41 ar71xx: update mips multi-machine stuff
SVN-Revision: 18985
2010-01-01 11:28:19 +00:00
Gabor Juhos
1a32a435f4 ar71xx: select AR71XX_NVRAM for the WRT160NL
SVN-Revision: 18984
2010-01-01 11:11:43 +00:00
Gabor Juhos
9649acf7c6 ar71xx: fix wireless mac address on the WRT160NL
SVN-Revision: 18976
2009-12-31 12:42:53 +00:00
Gabor Juhos
858ea76117 ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
SVN-Revision: 18951
2009-12-27 20:59:54 +00:00
Gabor Juhos
86a8480788 ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function
SVN-Revision: 18950
2009-12-27 20:59:50 +00:00
Gabor Juhos
828221c683 ar71xx: remove duplicated include
SVN-Revision: 18949
2009-12-27 20:59:46 +00:00
Gabor Juhos
761e67f9ff ar71xx: move dsa switch device support into a separate file
SVN-Revision: 18943
2009-12-26 14:19:26 +00:00
Gabor Juhos
bea984e187 ar71xx: move mach type definitions into a separate include file
SVN-Revision: 18942
2009-12-26 14:19:22 +00:00
Gabor Juhos
b7ee264d5f ar71xx: change board specific Kconfig option to 'default n'
SVN-Revision: 18941
2009-12-26 14:19:17 +00:00
Gabor Juhos
6ee4aa34ed ar71xx: move USB host device support into a separate file
SVN-Revision: 18940
2009-12-26 14:19:13 +00:00
Gabor Juhos
a93033d354 ar71xx: remove more unnecessary includes
SVN-Revision: 18939
2009-12-26 14:19:08 +00:00
Gabor Juhos
991a8d4398 ar71xx: use the generic m25p80 registration code for the MZK-W04NU
SVN-Revision: 18938
2009-12-26 14:19:05 +00:00
Gabor Juhos
c0993046d6 ar71xx: move gpio-buttons support into a spearate file
SVN-Revision: 18937
2009-12-26 14:19:01 +00:00
Gabor Juhos
3687b4fb26 ar71xx: move leds-gpio device support into a spearate file
SVN-Revision: 18936
2009-12-26 14:18:54 +00:00
Gabor Juhos
eb15b88af2 ar71xx: move PB42 specific PCI init code into a separate file
SVN-Revision: 18932
2009-12-25 13:09:04 +00:00
Gabor Juhos
7cf529c357 ar71xx: remove unnecessary includes
SVN-Revision: 18931
2009-12-25 13:09:00 +00:00
Gabor Juhos
40219e9bf4 ar71xx: fix bi-color led on the TL-WR841N v1.5
SVN-Revision: 18926
2009-12-25 10:06:25 +00:00
Gabor Juhos
cace9f4566 ar71xx: add support for the TL-WR841N v1.5 board
SVN-Revision: 18893
2009-12-22 19:31:28 +00:00
Gabor Juhos
bb9123ebbe ar71xx: update AR7240 PCI code
SVN-Revision: 18860
2009-12-20 13:46:23 +00:00
Gabor Juhos
6fcb5f6294 ar71xx: Fix LED active_low for the TL-WR1043ND board
This fixes the LED active_low's for the TP-Link wr1043nd board

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>

SVN-Revision: 18844
2009-12-19 07:35:49 +00:00
Gabor Juhos
17ee33ebb9 tl-wr1043nd: Register missing leds.
This adds the folowing for the TP-Link wr1043nd board
1. USB and WLAN LEDS
2. Change QSS LED from red to green
3. Fix polarity of the System LED

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>

SVN-Revision: 18821
2009-12-18 12:57:12 +00:00
Gabor Juhos
a733e30bf6 ar71xx: ar913x_wmac device support into a separate file
SVN-Revision: 18820
2009-12-18 12:57:09 +00:00
Gabor Juhos
70d31d46a8 ar71xx: move AP94 specific PCI init code into a separate file
SVN-Revision: 18819
2009-12-18 12:57:05 +00:00
Gabor Juhos
1f114b0dbd ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the patch from #6186)
SVN-Revision: 18818
2009-12-18 12:57:01 +00:00
Gabor Juhos
e190743d25 ar71xx: add common m25p80 device
SVN-Revision: 18817
2009-12-18 12:56:55 +00:00
Gabor Juhos
4734a69891 ar71xx: add driver for the USB LED on the WNDR3700
SVN-Revision: 18758
2009-12-11 20:32:31 +00:00
Gabor Juhos
de8bfcaf38 ar71xx: add ar71xx_device_stopped function
SVN-Revision: 18757
2009-12-11 20:32:28 +00:00
Gabor Juhos
1156a9ac0c ar71xx: merge DSA switch patch
SVN-Revision: 18752
2009-12-11 16:41:51 +00:00
Gabor Juhos
2b988fa855 ar71xx: register rtl8366-smi device on the DIR-825 B1 board
SVN-Revision: 18710
2009-12-09 08:03:31 +00:00
Felix Fietkau
2bff4bf4e5 rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly
SVN-Revision: 18709
2009-12-09 03:25:33 +00:00
Felix Fietkau
ddc2e2270b ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309)
SVN-Revision: 18699
2009-12-08 14:06:18 +00:00
Gabor Juhos
7d8a1bf239 ar71xx: TL-WR1043ND support cleanup
SVN-Revision: 18697
2009-12-08 12:46:30 +00:00
Gabor Juhos
b12d752a63 ar71xx: preliminary support for the TL-WR1043ND
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.

Hope Ive done this right, First time submiting a patch.

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>

SVN-Revision: 18696
2009-12-08 12:46:25 +00:00
Gabor Juhos
63d8f159db ar71xx: register rtl8366_smi device on the WNDR3700
SVN-Revision: 18695
2009-12-08 10:29:37 +00:00
Gabor Juhos
18867965f7 ar71xx: add support for external mii_bus
SVN-Revision: 18692
2009-12-08 10:29:27 +00:00
Gabor Juhos
f065bbdf7f ar71xx: DIR-825 support cleanup
SVN-Revision: 18622
2009-12-03 15:07:41 +00:00
Gabor Juhos
e4d21e0399 ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)
SVN-Revision: 18621
2009-12-03 15:07:34 +00:00
Gabor Juhos
35dbf66787 ar71xx: override fifo_cfg[123] values on AR7240
SVN-Revision: 18614
2009-11-30 13:53:39 +00:00
Felix Fietkau
896090973f ar71xx: add usb support for ubnt rocket m
SVN-Revision: 18598
2009-11-29 13:33:15 +00:00
Gabor Juhos
cfe5a8b593 ar71xx: fix mac address for 5GHz interface on WNDR3700
SVN-Revision: 18586
2009-11-28 18:01:09 +00:00
Gabor Juhos
971fcf9943 ar71xx: add PCI fixup for the WNDR3700 board
SVN-Revision: 18565
2009-11-27 21:21:21 +00:00
Gabor Juhos
f662714bba ar71xx: fix pll_1000 values for the WNDR3700
SVN-Revision: 18564
2009-11-27 21:21:17 +00:00
Gabor Juhos
5e89cb5d31 ar71xx: add AR724x GPIO_FUNC register bit defines
SVN-Revision: 18561
2009-11-27 21:21:06 +00:00
Gabor Juhos
b1e79f5d0f ar71xx: fix AR724X_GPIO_COUNT
SVN-Revision: 18560
2009-11-27 21:21:01 +00:00
Gabor Juhos
42d014bce4 ar71xx: add AR724x register defines
SVN-Revision: 18559
2009-11-27 21:20:54 +00:00
Felix Fietkau
0c687044b2 ar71xx: use a separate board id for rocket m
SVN-Revision: 18450
2009-11-18 18:10:33 +00:00
Matteo Croce
8bb3f7cbe5 ar71xx: add Ubiquiti Rocket M and Nanostation M support
SVN-Revision: 18447
2009-11-18 17:05:42 +00:00
Gabor Juhos
b7692e73c6 ar71xx: setup platform data for ath9k on the TL-WR741ND, Bullet M and on the WNDR3700 boards
SVN-Revision: 18437
2009-11-16 17:31:32 +00:00
Gabor Juhos
a12a03de8d ar71xx: register LEDs and buttons on the WNDR3700
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415)

SVN-Revision: 18435
2009-11-16 17:31:25 +00:00
Gabor Juhos
2f5d0b63d4 ar71xx: use __init for ar{71,91}xx_usb_setup
SVN-Revision: 18434
2009-11-16 17:31:22 +00:00
Gabor Juhos
5ab66428b0 ar71xx: add preliminary support for the Netgear WNDR3700
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311

SVN-Revision: 18411
2009-11-13 17:11:29 +00:00
Gabor Juhos
21fc9ffe63 ar71xx: use soc specific divider for mdio clock
SVN-Revision: 18225
2009-10-30 12:26:22 +00:00
Gabor Juhos
891a351b39 ar71xx: Compex WPJ543 board is supported as well
SVN-Revision: 18100
2009-10-20 12:59:42 +00:00
Gabor Juhos
053e9ab067 ar71xx: fix PCI IRQ map of the WP543
SVN-Revision: 18099
2009-10-20 12:59:39 +00:00
Gabor Juhos
b1cd54b6b9 ar71xx: reset the phy chip along with the ethernet mac on the WP543 board
SVN-Revision: 18072
2009-10-19 08:07:32 +00:00
Gabor Juhos
ebaa6a2fab ar71xx: reset the ethernet device before registration
SVN-Revision: 18071
2009-10-19 08:07:29 +00:00
Gabor Juhos
399aeeed70 ar71xx: initialize PCI controller on the Bullet M
SVN-Revision: 17812
2009-10-01 19:41:11 +00:00
Gabor Juhos
d2c055526c ar71xx: init ethernet mac address on the Bullet M
SVN-Revision: 17811
2009-10-01 19:41:08 +00:00
Gabor Juhos
fa59c65847 ar71xx: register GPIO button on the Bullet M
SVN-Revision: 17809
2009-10-01 19:41:03 +00:00
Gabor Juhos
5aae65b58c ar71xx: add PCI Host Controller fixup for ar724x
SVN-Revision: 17808
2009-10-01 19:41:00 +00:00
Gabor Juhos
0757fee42d ar71xx: use ar71xx_pci_fixup on ar71xx SoCs only
SVN-Revision: 17807
2009-10-01 19:40:57 +00:00
Gabor Juhos
2e09669095 ar71xx: fix a typo in the ar724x PCI code
SVN-Revision: 17806
2009-10-01 19:40:51 +00:00
Gabor Juhos
0eba7ba4ff ar71xx: don't use mac_base2 in the ag71xx driver
SVN-Revision: 17693
2009-09-23 17:44:02 +00:00
Matteo Croce
41ab4d3021 ar71xx: preliminary Ubiquiti Bullet M support
SVN-Revision: 17586
2009-09-15 09:16:21 +00:00
Gabor Juhos
967cc718f8 ar71xx: rewrite prom code (based on a patch by Jeff Hansen)
SVN-Revision: 17566
2009-09-10 18:30:12 +00:00
Gabor Juhos
376fba2698 ar71xx: add preliminary support for the RB-411U (thanks to Feher Zoltan for testing)
SVN-Revision: 17543
2009-09-08 19:16:15 +00:00
Gabor Juhos
582b8ba168 move early_printk stuff into a separate file
SVN-Revision: 17403
2009-08-26 07:31:04 +00:00
Gabor Juhos
4c8aa29833 remove AR71XX_EARLY_SERIAL stuff
SVN-Revision: 17400
2009-08-25 17:13:12 +00:00
Gabor Juhos
dd48a43550 WRT160NL: add default trigger for the power led
SVN-Revision: 17203
2009-08-09 14:13:26 +00:00
Gabor Juhos
0c2142d309 WRT160NL: register GPIO LEDs and buttons
SVN-Revision: 17166
2009-08-07 17:33:02 +00:00
Gabor Juhos
66f839ac67 oops, add missing semicolons
SVN-Revision: 17142
2009-08-06 09:42:29 +00:00
Gabor Juhos
e632633c5d get rid of some ifdefs in the IRQ code
SVN-Revision: 17141
2009-08-06 09:32:15 +00:00
Gabor Juhos
116576b3ba fix MISC IRQ handling on the AR7240
SVN-Revision: 17098
2009-08-02 13:27:43 +00:00
Gabor Juhos
5ab3bcc27f add ethernet suppor for the WRT160NL (thanks to Christian Daniel)
SVN-Revision: 17057
2009-07-31 07:01:26 +00:00
Gabor Juhos
a21bf40453 increase size of the kernel partition on the TL-WR[789]41N boards
SVN-Revision: 16785
2009-07-11 17:20:46 +00:00
Gabor Juhos
abd419a7df increase size of the kernel partition on the TEW-632BR board
SVN-Revision: 16784
2009-07-11 17:15:30 +00:00
Gabor Juhos
2dc230d260 register the VSC7395 device on the PB44 board
SVN-Revision: 16783
2009-07-11 16:27:54 +00:00
Gabor Juhos
218298becf use platform data to setup the MAC_CFG register in the spi_vsc7385 driver
SVN-Revision: 16780
2009-07-11 14:59:31 +00:00
Gabor Juhos
a38d9256a7 add board setup code for the RB-450G/RB-433UAH boards * based on a patch from http://forum.openwrt.org/viewtopic.php?pid=91127#p91127
SVN-Revision: 16754
2009-07-09 19:46:41 +00:00
Gabor Juhos
b8a97ca5c5 register a GPIO LEDs and buttons on the PB44 board
SVN-Revision: 16748
2009-07-09 06:58:38 +00:00
Gabor Juhos
eca1b1ac07 register a I2C GPIO expander on the PB44 board
SVN-Revision: 16747
2009-07-09 06:57:44 +00:00
Gabor Juhos
2614fcb2f3 add initial support for the TL-WR741ND board
SVN-Revision: 16739
2009-07-07 19:20:10 +00:00
Gabor Juhos
a6e3c605bc add AR7240 specific fixes for the ag71xx driver
SVN-Revision: 16737
2009-07-07 18:06:02 +00:00
Gabor Juhos
f04fcfd801 make irq_chip definitions static
SVN-Revision: 16736
2009-07-07 18:04:26 +00:00
Gabor Juhos
3b47053fb3 AR7240 requires different IRQ unmasking code
SVN-Revision: 16734
2009-07-07 13:57:57 +00:00
Gabor Juhos
c38e7aa7b2 add missing break statement
SVN-Revision: 16701
2009-07-05 18:02:12 +00:00
Gabor Juhos
600958b416 add missing includes
SVN-Revision: 16676
2009-07-05 08:40:23 +00:00
Gabor Juhos
54038e0540 add AR7240 specific PCI code
SVN-Revision: 16674
2009-07-05 08:06:24 +00:00
Gabor Juhos
1e84d049a4 fix a typo in the PCI code
SVN-Revision: 16673
2009-07-05 08:02:23 +00:00
Gabor Juhos
089b5ccb47 reorganize PCI code
SVN-Revision: 16672
2009-07-05 07:53:07 +00:00
Gabor Juhos
d55e5fb153 fix AR7240 PCI IRQ support
SVN-Revision: 16669
2009-07-04 05:18:37 +00:00
Gabor Juhos
d97b12f8b7 fix ar71xx_device_{start,stop} functions on the AR7240 SoC
SVN-Revision: 16648
2009-07-01 19:41:00 +00:00
Gabor Juhos
17c84f1db9 initialize GPIO for the AR7240 SoC
SVN-Revision: 16647
2009-07-01 19:38:26 +00:00
Gabor Juhos
c524244c08 initialize IRQs for the AR7240 SoC
SVN-Revision: 16646
2009-07-01 19:37:03 +00:00
Gabor Juhos
eb3ff716c1 add AR7240 specific frequency detection
SVN-Revision: 16645
2009-07-01 19:34:59 +00:00
Gabor Juhos
18d7edb82e add AR7240 specific definitions
SVN-Revision: 16644
2009-07-01 19:32:48 +00:00
Gabor Juhos
d9259b25bf increase NR_IRQS
SVN-Revision: 16623
2009-06-29 20:01:22 +00:00
Gabor Juhos
161fe2c40c fix PCI_CORE irq number
SVN-Revision: 16622
2009-06-29 19:58:36 +00:00
Gabor Juhos
5899460ebf use enum for the machine type
SVN-Revision: 16588
2009-06-27 20:20:05 +00:00
Gabor Juhos
8094a7062f add AR913x specific GPIO function bit definitions
SVN-Revision: 16583
2009-06-27 16:57:45 +00:00
Gabor Juhos
c94dcb755e setup mac address on the WNR2000
SVN-Revision: 16450
2009-06-14 11:38:26 +00:00
Gabor Juhos
5d21be0e31 move definition of ar91xx_flash_platform_data into a separate header file (closes #5321)
SVN-Revision: 16417
2009-06-11 08:07:14 +00:00
Gabor Juhos
31c9a411eb flush more register writings
SVN-Revision: 16415
2009-06-11 07:18:05 +00:00
Gabor Juhos
3de6b54859 flush AR71XX_RESET_PCI_INT_ENABLE register after writing
SVN-Revision: 16372
2009-06-07 18:23:39 +00:00
Gabor Juhos
0c4b6a0b07 setup mac address on the AP81 board
SVN-Revision: 16366
2009-06-06 19:03:30 +00:00
Gabor Juhos
67ace05bfe update flash locking code
SVN-Revision: 16359
2009-06-06 15:56:03 +00:00
Gabor Juhos
9668bbeea9 handle PCI_CORE interrupt as well
SVN-Revision: 16358
2009-06-06 13:48:36 +00:00
Gabor Juhos
ab19bea631 change flash partition map of the AP83 board
SVN-Revision: 16356
2009-06-06 09:57:37 +00:00
Gabor Juhos
ba08043ce4 add parallel flash driver
SVN-Revision: 16353
2009-06-06 08:41:47 +00:00
Gabor Juhos
e72be9e83b fix a typo
SVN-Revision: 16348
2009-06-05 19:29:41 +00:00
Gabor Juhos
45d8b93d06 create a 'firmware' partition for MZK-W300NH board
SVN-Revision: 16347
2009-06-05 15:31:33 +00:00
Gabor Juhos
f3c3e2772f improve MZK-W300NH support (thanks to Kazuki Shimada for the board)
SVN-Revision: 16340
2009-06-04 18:18:36 +00:00
Gabor Juhos
74dfd77f41 pass ucode name to the VSC7385 driver on the AP83 board
SVN-Revision: 16326
2009-06-04 07:56:49 +00:00
Gabor Juhos
782cd2cf27 add experimental support for the AP83-040 board
SVN-Revision: 16316
2009-06-03 19:54:25 +00:00
Gabor Juhos
b0acbe709c add flash locking code
SVN-Revision: 16311
2009-06-03 18:17:07 +00:00
Gabor Juhos
f84d0d2ae0 register parallel flash device on the AP83 board
SVN-Revision: 16232
2009-05-31 12:37:40 +00:00
Gabor Juhos
c2c496868e add support for board specific PLL settings
SVN-Revision: 16133
2009-05-28 13:00:08 +00:00
Gabor Juhos
cbe2c48249 register SPI bus on the AP83 board
SVN-Revision: 16115
2009-05-27 17:16:19 +00:00
Gabor Juhos
f6e6a733f5 add preliminary support for the WRT160NL
SVN-Revision: 16068
2009-05-25 18:36:49 +00:00
Gabor Juhos
db1d746463 update board setup code of the RouterStation Pro (patch by Ubiquiti Networks)
SVN-Revision: 16065
2009-05-25 17:31:05 +00:00
Gabor Juhos
220751e8ab fix typos in the PB42 support code
SVN-Revision: 15963
2009-05-21 18:22:01 +00:00
Gabor Juhos
7807c1a29f add experimental support for the Atheros PB44 board
SVN-Revision: 15928
2009-05-20 08:23:48 +00:00
Gabor Juhos
2e7a1d95f7 reorder mtd partitions on the WRT400N
SVN-Revision: 15829
2009-05-13 20:12:07 +00:00
Gabor Juhos
9ecc257d2f create image for the WRT400N board (thanks to netprince)
SVN-Revision: 15828
2009-05-13 20:00:42 +00:00
Gabor Juhos
fb48fbba16 remove extern directives
SVN-Revision: 15735
2009-05-09 05:57:56 +00:00
Gabor Juhos
15f0a64dda increase AR71XX_MEM_SIZE_MAX (thanks to Leo Galambos for reporting)
SVN-Revision: 15734
2009-05-09 05:39:12 +00:00