ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)

Browse Source 
SVN-Revision: 18621
This commit is contained in:
Gabor Juhos 2009-12-03 15:07:34 +00:00
parent 8a7e19e7db
commit e4d21e0399
13 changed files with 397 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network Normal file
View File

@ -0,0 +1,16 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth1
option proto dhcp

3
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -42,6 +42,9 @@ get_status_led() {
bullet-m | rocket-m | nano-m)
status_led="ubnt:green:link4"
;;
dir825b1)
status_led="dir825b1:orange:power"
;;
ls-sr71)
status_led="ubnt:green:d22"
;;

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -19,6 +19,9 @@ ar71xx_board_name() {
*AW-NR580)
name="aw-nr580"
;;
*DIR825B1)
name="dir825b1"
;;
*"Bullet M")
name="bullet-m"
;;

2
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -68,7 +68,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
ap83 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1

1
target/linux/ar71xx/config-2.6.30
View File

@ -6,6 +6,7 @@ CONFIG_AG71XX=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR825B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y

1
target/linux/ar71xx/config-2.6.31
View File

@ -7,6 +7,7 @@ CONFIG_AG71XX=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DIR825B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y

4
target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
View File

@ -10,6 +10,10 @@ config AR71XX_MACH_AP83
bool "Atheros AP83 board support"
default y
config AR71XX_MACH_DIR825B1
bool "D-Link DIR-825 rev. B1 board support"
default y
config AR71XX_MACH_PB42
bool "Atheros PB42 board support"
default y

1
target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
View File

@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o

317
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c Normal file
View File

@ -0,0 +1,317 @@
/*
* D-Link DIR-825 rev. B1 board support
*
* Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
*
* based on mach-wndr3700.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include <linux/delay.h>
#include "devices.h"
#define DIR825B1_GPIO_LED_BLUE_USB 0
#define DIR825B1_GPIO_LED_ORANGE_POWER 1
#define DIR825B1_GPIO_LED_BLUE_POWER 2
#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4
#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
#define DIR825B1_GPIO_LED_BLUE_PLANET 11
#define DIR825B1_GPIO_BTN_RESET 3
#define DIR825B1_GPIO_BTN_POWERSAVE 8
#define DIR825B1_BUTTONS_POLL_INTERVAL 20
#define DIR825B1_CAL_LOCATION_0 0xbf661000
#define DIR825B1_CAL_LOCATION_1 0xbf665000
#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
static struct ath9k_platform_data dir825b1_wmac0_data;
static struct ath9k_platform_data dir825b1_wmac1_data;
static char dir825b1_wmac0_mac[6];
static char dir825b1_wmac1_mac[6];
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir825b1_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "config",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x050000,
.size = 0x610000,
} , {
.name = "caldata",
.offset = 0x660000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data dir825b1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = dir825b1_partitions,
.nr_parts = ARRAY_SIZE(dir825b1_partitions),
#endif
};
static struct spi_board_info dir825b1_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = &dir825b1_flash_data,
}
};
static struct gpio_led dir825b1_leds_gpio[] __initdata = {
{
.name = "dir825b1:blue:usb",
.gpio = DIR825B1_GPIO_LED_BLUE_USB,
.active_low = 1,
}, {
.name = "dir825b1:orange:power",
.gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
.active_low = 1,
}, {
.name = "dir825b1:blue:power",
.gpio = DIR825B1_GPIO_LED_BLUE_POWER,
.active_low = 1,
}, {
.name = "dir825b1:blue:powersave",
.gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE,
.active_low = 1,
}, {
.name = "dir825b1:orange:planet",
.gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
.active_low = 1,
}, {
.name = "dir825b1:blue:planet",
.gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
.active_low = 1,
}
};
static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = DIR825B1_GPIO_BTN_RESET,
.active_low = 1,
} , {
.desc = "powersave",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = DIR825B1_GPIO_BTN_POWERSAVE,
.active_low = 1,
}
};
#ifdef CONFIG_PCI
static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
{
.slot = 0,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV0,
}, {
.slot = 1,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV1,
}
};
static int dir825b1_pci_plat_dev_init(struct pci_dev *dev)
{
switch(PCI_SLOT(dev->devfn))
{
case 17:
dev->dev.platform_data = &dir825b1_wmac0_data;
break;
case 18:
dev->dev.platform_data = &dir825b1_wmac1_data;
break;
}
return(0);
}
static void dir825b1_pci_fixup(struct pci_dev *dev)
{
void __iomem *mem;
u16 *cal_data;
u16 cmd;
u32 bar0;
u32 val;
if (ar71xx_mach != AR71XX_MACH_DIR825B1) return;
dir825b1_pci_plat_dev_init(dev);
cal_data = dev->dev.platform_data;
if (*cal_data != 0xa55a)
{
printk(KERN_ERR "PCI: no calibration data found for %s\n",
pci_name(dev));
return;
}
mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
if (!mem)
{
printk(KERN_ERR "PCI: ioremap error for device %s\n",
pci_name(dev));
return;
}
printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
/* Setup the PCI device to allow access to the internal registers */
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
pci_read_config_word(dev, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_write_config_word(dev, PCI_COMMAND, cmd);
/* set pointer to first reg address */
cal_data += 3;
while (*cal_data != 0xffff)
{
u32 reg;
reg = *cal_data++;
val = *cal_data++;
val |= (*cal_data++) << 16;
__raw_writel(val, mem + reg);
udelay(100);
}
pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
dev->vendor = val & 0xffff;
dev->device = (val >> 16) & 0xffff;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
dev->revision = val & 0xff;
dev->class = val >> 8; /* upper 3 bytes */
pci_read_config_word(dev, PCI_COMMAND, &cmd);
cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
pci_write_config_word(dev, PCI_COMMAND, cmd);
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
iounmap(mem);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
dir825b1_pci_fixup);
static void __init dir825b1_pci_init(void)
{
memcpy(dir825b1_wmac0_data.eeprom_data,
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
sizeof(dir825b1_wmac0_data.eeprom_data));
memcpy(dir825b1_wmac1_data.eeprom_data,
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
sizeof(dir825b1_wmac1_data.eeprom_data));
memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6);
dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac;
memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac;
ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init;
ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs);
}
#else
static void __init dir825b1_pci_init(void) { }
#endif /* CONFIG_PCI */
static void __init dir825b1_setup(void)
{
u8 mac[6], i;
memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
for(i = 5; i >= 3; i--)
if(++mac[i] != 0x00) break;
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x1E;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0xC0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, dir825b1_spi_info,
ARRAY_SIZE(dir825b1_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
dir825b1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir825b1_gpio_buttons),
dir825b1_gpio_buttons);
ar71xx_add_device_usb();
dir825b1_pci_init();
}
MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup);

3
target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
View File

@ -58,6 +58,9 @@ static struct board_rec boards[] __initdata = {
}, {
.name = "AW-NR580",
.mach_type = AR71XX_MACH_AW_NR580,
}, {
.name = "DIR825B1",
.mach_type = AR71XX_MACH_DIR825B1,
}, {
.name = "TEW-632BRP",
.mach_type = AR71XX_MACH_TEW_632BRP,

1
target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h
View File

@ -124,6 +124,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_AP81, /* Atheros AP81 */
AR71XX_MACH_AP83, /* Atheros AP83 */
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */

34
target/linux/ar71xx/image/Makefile
View File

@ -77,6 +77,23 @@ define Image/Build/WRT400N
fi; fi
endef
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,6208k@0x50000(firmware)
define Image/Build/DIR825B1
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
rm -f $(call imgname,$(1),$(2)).bin; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
rm -f $(call imgname,$(1),$(2)).bin; \
else \
dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
fi; fi
endef
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
define Image/Build/Cameo
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
@ -268,6 +285,18 @@ define Image/Build/Template/WRT400N/jffs2-64k
$(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
endef
define Image/Build/Template/DIR825B1
$(call Image/Build/DIR825B1,$(1),$(2),$(3),$(4))
endef
define Image/Build/Template/DIR825B1/squashfs
$(call Image/Build/Template/DIR825B1,squashfs,$(1),$(2),$(3))
endef
define Image/Build/Template/DIR825B1/jffs2-64k
$(call Image/Build/Template/DIR825B1,jffs2-64k,$(1),$(2),$(3))
endef
define Image/Build/Template/CyberTAN
$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
endef
@ -453,6 +482,10 @@ define Image/Build/Profile/WRT400N
$(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
endef
define Image/Build/Profile/DIR825B1
$(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1)
endef
define Image/Build/Profile/WRT160NL
$(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
endef
@ -461,6 +494,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/AP83,$(1))
$(call Image/Build/Profile/A02RBW300N,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
$(call Image/Build/Profile/MZKW04NU,$(1))
$(call Image/Build/Profile/MZKW300NH,$(1))
$(call Image/Build/Profile/TEW632BRP,$(1))

12
target/linux/ar71xx/profiles/d-link.mk
View File

@ -15,3 +15,15 @@ define Profile/DIR615C1/Description
endef
$(eval $(call Profile,DIR615C1))
define Profile/DIR825B1
NAME:=D-Link DIR-825 rev. B1
PACKAGES:=kmod-ath9k hostapd-mini
endef
define Profile/DIR825B1/Description
Package set optimized for the D-Link DIR-825 rev. B1.
endef
$(eval $(call Profile,DIR825B1))