add initial support for the TL-WR741ND board

SVN-Revision: 16739
This commit is contained in:
Gabor Juhos 2009-07-07 19:20:10 +00:00
parent 7d5525a5be
commit 2614fcb2f3
8 changed files with 162 additions and 0 deletions

View File

@ -16,6 +16,7 @@ CONFIG_AR71XX_MACH_PB42=y
CONFIG_AR71XX_MACH_PB44=y
CONFIG_AR71XX_MACH_RB_4XX=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNR2000=y

View File

@ -15,6 +15,7 @@ CONFIG_AR71XX_MACH_PB42=y
CONFIG_AR71XX_MACH_PB44=y
CONFIG_AR71XX_MACH_RB_4XX=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNR2000=y

View File

@ -15,6 +15,7 @@ CONFIG_AR71XX_MACH_PB42=y
CONFIG_AR71XX_MACH_PB44=y
CONFIG_AR71XX_MACH_RB_4XX=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNR2000=y

View File

@ -59,6 +59,10 @@ config AR71XX_MACH_MZK_W300NH
bool "Planex MZK-W300NH board support"
default y
config AR71XX_MACH_TL_WR741ND
bool "TP-LINK TL-WR741ND support"
default y
config AR71XX_MACH_TL_WR941ND
bool "TP-LINK TL-WR941ND support"
default y

View File

@ -22,6 +22,7 @@ obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_AR71XX_MACH_RB_4XX) += mach-rb-4xx.o
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o

View File

@ -0,0 +1,150 @@
/*
* TP-LINK TL-WR741ND board support
*
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
#include "devices.h"
#define TL_WR741ND_GPIO_LED_QSS 0
#define TL_WR741ND_GPIO_LED_SYSTEM 1
#define TL_WR741ND_GPIO_BTN_RESET 11
#define TL_WR741ND_GPIO_BTN_QSS 12
#define TL_WR741ND_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition tl_wr741nd_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x120000,
} , {
.name = "rootfs",
.offset = 0x140000,
.size = 0x2b0000,
} , {
.name = "art",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x020000,
.size = 0x3d0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_wr741nd_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = tl_wr741nd_partitions,
.nr_parts = ARRAY_SIZE(tl_wr741nd_partitions),
#endif
};
static struct spi_board_info tl_wr741nd_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = &tl_wr741nd_flash_data,
}
};
static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
{
.name = "tl-wr741nd:green:system",
.gpio = TL_WR741ND_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "tl-wr741nd:green:qss",
.gpio = TL_WR741ND_GPIO_LED_QSS,
.active_low = 1,
}
};
static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = TL_WR741ND_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "qss",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = TL_WR741ND_GPIO_BTN_QSS,
.active_low = 1,
}
};
static struct ar71xx_pci_irq tl_wr741nd_pci_irqs[] __initdata = {
{
.slot = 0,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV0,
}
};
static void __init tl_wr741nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
/* WAN port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
ar71xx_add_device_spi(NULL, tl_wr741nd_spi_info,
ARRAY_SIZE(tl_wr741nd_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
tl_wr741nd_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr741nd_gpio_buttons),
tl_wr741nd_gpio_buttons);
ar71xx_pci_init(ARRAY_SIZE(tl_wr741nd_pci_irqs), tl_wr741nd_pci_irqs);
}
MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TP-LINK TL-WR741ND", tl_wr741nd_setup);

View File

@ -56,6 +56,9 @@ static struct board_rec boards[] __initdata = {
}, {
.name = "TEW-632BRP",
.mach_type = AR71XX_MACH_TEW_632BRP,
}, {
.name = "TL-WR741ND",
.mach_type = AR71XX_MACH_TL_WR741ND,
}, {
.name = "TL-WR941ND",
.mach_type = AR71XX_MACH_TL_WR941ND,

View File

@ -131,6 +131,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */
AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */
AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */