Commit Graph

62691 Commits

Author SHA1 Message Date
Felix Fietkau
3b661cfcf9 build: remove targetinfo invalidation based on .config
Target info no longer depends on config settings

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-12-02 12:28:52 +01:00
Robert Marko
044d2fea81 rpcd: update to Git HEAD (2024-12-02)
cc9a471c32e1 rpc-sys: rework packagelist call for apk

Link: https://github.com/openwrt/openwrt/pull/17144
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-02 12:25:02 +01:00
Andris PE
207bfee855 netifd: check if /sbin/wifi exists before calling it
Avoid harmless error from network script by checking presence of
now-optional wifi support script, most notably confusing users of x86
snapshots.

Fixes: 
Signed-off-by: Andris PE <neandris@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14986
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-30 19:23:29 +01:00
Rosen Penev
86f489c02f ath79: remove wmac mac address defaults
1002 and 5006 are default addresses as part of the calibration data.
Don't bother specifying them explicitly.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17082
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:55:17 +01:00
Andreas Böhler
dde510cf97 ath79: add support for KuWFi N650 CPE
The KuWFi N650 is a 5GHz outdoor wireless bridge based on QCA9563.

Specs
=====

CPU: QCA9563, 775MHz
RAM: 128MiB
Flash: 16MiB
Wireless: QCA9888 (5GHz only)
Ethernet: 2x GBit (via QCA8337), 48V passive PoE

Installation
============

From OEM firmware
-----------------

The OEM firmware has telnet enabled by default. If not, it can be enabled
from the firmware web interface. You need a TFTP server on your computer
and the OpenWrt factory image should be available as "n650factory.bin".
It is assumed that your computer has the IP 192.168.1.1 and the N650
192.168.1.20 (default IP address).

1. Connect via Telnet to the device and log in with the default credentials
   "admin:admin"
2. Exploit the limited interface by typing "ps & /bin/sh"
3. Press <ENTER> to start the shell
4. Enter the following commands:

$ cd /tmp
$ tftp -r n650factory.bin -g 192.168.1.1
$ cat << EOF > /tmp/openwrt.sh
#!/bin/sh

IMAGE_NAME="\$1"

if [ ! -e \${IMAGE_NAME} ]; then
  echo "Image file not found: \${IMAGE_NAME}"
  exit 1
fi

. /usr/sbin/common.sh

kill_remaining TERM
sleep 3
kill_remaining KILL

run_ramfs mtd write \${IMAGE_NAME} firmware
sleep 2
reboot -f
EOF

$ chmod +x /tmp/openwrt.sh
$ /tmp/openwrt.sh n650factory.bin

Once the device reboots, it should load OpenWrt.

From UART
---------

UART installation is possible since the serial header is already soldered
on. The pinout is GND - Tx - Rx - VCC from top to bottom (RJ45 ports are
at the bottom). Connect with 115200 8N1.

First, boot OpenWrt from TFTP. Enter the following commands in the U-Boot
shell, assuming your computer has the IP address 192.168.1.1 and a TFTP
server running where the initramfs image is provided as n650.bin:

  setenv ipaddr 192.168.1.20
  setenv serverip 192.168.1.1
  tftpboot 0x84000000 n650.bin
  bootm

Once booted, transfer -loader.bin and -sysupgrade.bin images to the device
at /tmp. Enter the following commands, replacing the filenames:

  mtd write /tmp/loader.bin loader
  sysupgrade /tmp/sysupgrade.bin

Reboot and OpenWrt should load from flash.

Back to Stock
-------------

Back to stock is only possible if you saved a partition backup before
installing OpenWrt. Assuming you have fullbackup.bin covering the whole
flash, you need to prepare the image as follows:

$ dd if=fullbackup.bin of=fwconcat0.bin bs=65536 skip=4 count=212
$ dd if=fullbackup.bin of=loader.bin bs=65536 skip=216 count=1
$ dd if=fullbackup.bin of=fwconcat1.bin bs=65536 skip=217 count=22
$ cat fwconcat0.bin fwconcat1.bin > firmware.bin

Transfer firmware.bin and loader.bin to the OpenWrt device. First, flash
loader.bin to mtd device loader, then force sysupgrade:

$ mtd write loader.bin loader
$ sysupgrade -F firmware.bin

The reason for the two-step process is the way the flash layout is designed
for OpenWrt in contrast to the OEM firmware partition.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
Link: https://github.com/openwrt/openwrt/pull/17089
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:52:41 +01:00
Mikhail Zhilkin
ee8df790ca mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout
This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X
v1.

Stock U-Boot UBI size:   50 MiB
OpenWrt U-boot UBI size: 126 MiB

Install
-------
1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt
   initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10,
   12 and 14).
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

2. Make backups:
```
cat /dev/mtd0 > /tmp/boot.bin
cat /dev/mtd5 > /tmp/tp_data.bin
```
   Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to
   your PC using scp. You can also backup the remaining partititons. Copy
   backups to a safe place, they are required for the next steps and stock
   firmware recovery.

3. Reboot to OpenWrt initramfs:
```
reboot
```

4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin,
   ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from
   /tp_data backup) to the /tmp folder of the router using scp.

5. Prepare UBI:
```
ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3
ubimkvol /dev/ubi0 -N fip -t static -s 1MiB
ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip
ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000
ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000
```

6.  Install kmod-mtd-rw and unlock partitions:
```
opkg update && opkg install kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock boot
mtd unlock bl2
mtd unlock factory
```

7. Prepare "factory" partition:
```
dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin
dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc
dd if=/tmp/default-mac >> /tmp/factory.bin
```

8. Write "factory" partition:
```
mtd erase factory
mtd write /tmp/factory.bin factory
```

9. Write preloader partition:
```
mtd erase bl2
mtd write /tmp/ubi-preloader.bin bl2
```

10. Write OpenWrt sysupgrade image:
```
sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb
```

Recovery
--------
1. Place OpenWrt initramfs-recovery.itb image (with original name) on the
   tftp server (IP: 192.168.1.254).
2. Press "reset" button and power on the router. After ~10 sec release the
   button.
3. Use OpenWrt initramfs system for recovery.

BL2 and FIP recovery
--------------------
Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed:
Link: https://github.com/981213/mtk_uartboot
Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial

Return to stock:
----------------
1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router
   using scp.

2. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```

3. Restore stock U-Boot:
```
   insmod mtd-rw i_want_a_brick=1
   mtd unlock boot
   mtd erase boot
   mtd write /tmp/boot.bin boot
```

4. Erase UBI and reboot:
```
mtd erase ubi
reboot
```

5. Open U-Boot web recovery, upload stock firmware image and start
   upgrade.
Link: http://192.168.1.1

6. Complete steps 1-9 of the OpenWrt installation guide to get root
   rights.
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of
   the router using scp.

8. Restore stock calibrations:
```
mtd write /tmp/tp_data.bin tp_data
reboot
```

9. Perform "factory restore" via stock firmware web interface.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16744
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:36:05 +01:00
Mikhail Zhilkin
77cc4b7127 uboot-mediatek: add MERCUSYS MR90X v1 support
Add U-Boot replacement loader for the MERCUSYS MR90X. This is required
to increase available flash space in OpenWrt.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16744
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:36:05 +01:00
Mikhail Zhilkin
2ea9ede7a8 arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build
This commit adds mt7986-spim-nand-ddr3 build required for MERCUSYS MR90X
v1.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16744
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:36:05 +01:00
Christoph Krapp
22899e77a9 ath79: Unify Sophos AP15/AP15C dts files
The recently added AP15C dts file only differs by the definition of the
reset button. Unify the shared definition into a dtsi to reduce code
duplication.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://github.com/openwrt/openwrt/pull/16998
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 18:19:52 +01:00
Marty Jones
ac8d30a645 mac80211: realtek: add RTL8812au/RTL8821au support
This adds support for RTL8812au/RTL8821au USB adapters.
Run-tested: x86/64/rockchip
USB adapters tested: Alfa AWUS036ACS, D-Link DWA-171 A1.

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17079
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 17:38:44 +01:00
Marty Jones
36f6d6ddcd mac80211: realtek: backport support for RTL8812AU/RTL8821AU
Backport support for RTL8812AU/RTL8821AU USB adapters
Manually backported patch:
045-v6.13-wifi-rtw88-Enable-the-new-RTL8821AU-RTL8812AU-driver
Patches from 046 to 051 are pending.

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17079
[Move BPAUTO_WANT_DEV_COREDUMP to original patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 17:38:19 +01:00
Marty Jones
c48a48e658 linux-firmware: realtek: add RTL8812AU/RTL8821AU firmware
This adds firmware support for the RTL8812AU/RTL8821AU USB wireless adapters.

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17079
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 16:16:27 +01:00
Marty Jones
24c8f06807 linux-firmware: update to 20241110
linux-firmware update to 20241110
Move WCN6750 firmware to the device-specific subdir

git log --no-merges --pretty=oneline --abbrev-commit 20241110...20241017

1dbc4cfa rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x04D7_63F7
8a976e23 cnm: update chips&media wave521c firmware.
3636204f mediatek MT7920: update bluetooth firmware to 20241104091246
6627b025 linux-firmware: update firmware for MT7920 WiFi device
554c4761 copy-firmware.sh: Run check_whence.py only if in a git repo
1486d9aa cirrus: cs35l56: Add firmware for Cirrus CS35L56 for various Dell laptops
c99eeb4d amdgpu: update DMCUB to v9.0.10.0 for DCN351
b6bfff1a rtw89: 8852a: update fw to v0.13.36.2
ddf25515 rtw88: Add firmware v52.14.0 for RTL8812AU
dbb219d7 i915: Update Xe2LPD DMC to v2.23
937e463b linux-firmware: update firmware for mediatek bluetooth chip (MT7925)
62ee1c4b linux-firmware: update firmware for MT7925 WiFi device
a142ad72 WHENCE: Add sof-tolg for mt8195
fe16af92  linux-firmware: Update firmware file for Intel BlazarI core
c69bd749 qcom: Add link for QCS6490 GPU firmware
f4f5689f qcom: update gpu firmwares for qcs615 chipset
a6f3ab98 cirrus: cs35l56: Update firmware for Cirrus Amps for some HP laptops
048795ee ath11k: move WCN6750 firmware to the device-specific subdir
8a7bde2c xe: Update LNL GSC to v104.0.0.1263
e0ee2f91 i915: Update MTL/ARL GSC to v102.1.15.1926
987607d6 amdgpu: DMCUB updates for various AMDGPU ASICs
f9a502ab mediatek: Add sof-tolg for mt8195
1c289f28 i915: Add Xe3LPD DMC
c2379c61 cnm: update chips&media wave521c firmware.
71f8f3e0 linux-firmware: Add firmware for Cirrus CS35L41
65c4b9b7 linux-firmware: Update firmware file for Intel BlazarU core
4f397306 Makefile: error out of 'install' if COPYOPTS is set
2f046411 check_whence.py: skip some validation if git ls-files fails
feb324e3 qcom: Add Audio firmware for X1E80100 CRD/QCPs
3d45353e amdgpu: DMCUB updates forvarious AMDGPU ASICs
c569ca45 brcm: replace NVRAM for Jetson TX1

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17079
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-30 16:16:27 +01:00
INAGAKI Hiroshi
af611bce44 Revert "ath79: elecom,wab: use nvmem"
This reverts commit 70e41d0205.

"ethaddr" is stored into the "u-boot-env" (stock: "Config") partition
and it's quoted with double-quotations, but that format is not supported
by the current NVMEM u-boot-env driver (and mac_pton() function) and the
MAC address won't be parsed to byte array.
This causes random MAC addresses on the adapters, so revert the above
commit.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17116
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-29 15:02:48 +01:00
Rosen Penev
39b0f081ec apk: build static
libapk as a library is used nowhere else and makes no sense to link it
shared. By linking static, we can take advantage of LTO and get the size
reduced further.

Some numbers locally:

Before:

168K staging_dir/target-mips_24kc_musl/root-ath79/usr/bin/apk*
252K staging_dir/target-mips_24kc_musl/root-ath79/usr/lib/libapk.so.2.99.0*

Static:
344K staging_dir/target-mips_24kc_musl/root-ath79/usr/bin/apk*

Static + LTO:
305K staging_dir/target-mips_24kc_musl/root-ath79/usr/bin/apk*

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17109
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-29 11:32:34 +01:00
Robert Marko
55dfe3fcea image: apk: dont fail on removing a package that doesnt exist
Currently, in case when a package in the device package list is marked with
the "-"" prefix meaning that its supposed to be removed for that device but
it was not actually previously built it will cause the APK to error out it
and thus image generation will also fail.

So, lets do what OPKG build step does and supress the error with the "-"
prefix in make.

Fixes: 
Fixes: d788ab376f ("build: add APK package build capabilities")
Link: https://github.com/openwrt/openwrt/pull/17106
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-29 11:31:56 +01:00
Maxim Anisimov
5a4eb56a7b mediatek/filogic: add Keenetic KN-3911 support
Specification:
 - MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
 - 512MB RAM
 - 128MB SPI NAND
 - 2 LEDs (green, orange)
 - 3 buttons (fn, reset, wps)
 - 2 2.5Gbit ethernet ports based on Airoha EN8811H phy

Serial Interface:
 - 3 Pins GND, RX, TX
 - Settings: 115200, 8N1

Notes:
 - The device supports dual boot mode

Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.1.2/24 and tftp server.
2. Rename "openwrt-mediatek-filogic-keenetic_kn-3911-squashfs-factory.bin"
   to "KN-3911_recovery.bin" and place it in tftp server directory.
3. Connect PC with ethernet port, press the reset button, power up
   the device and keep button pressed until status led start blinking.
4. Device will download file from server, write it to flash and reboot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 22:33:21 +01:00
Maxim Anisimov
0d651dd302 mediatek/filogic: enable mtd virtual concat support
This is required for upcoming Keenetic KN-3911 support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 22:33:21 +01:00
Maxim Anisimov
79db5d65ca ramips: move zyimage creation to include/image-commands.mk
This is required for upcoming Keenetic KN-3911 support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16830
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 22:33:21 +01:00
Petr Štetiar
30ae0b3f1e
mediatek: filogic: Cudy WR3000S v1: fix CRLF line endings
DTS file for this device seems to be using CRLF line endings, so lets
convert them into Unix-style LF.

Fixes: faf4b3e0f7 ("mediatek: filogic: add support for Cudy WR3000S v1")
Link: https://github.com/openwrt/openwrt/pull/17096
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-28 21:19:47 +00:00
George Oldfort
e44180d45c mediatek: filogic: add KTD2026/7 driver to Acer Connect Vero W6m
This commit adds kmod-leds-ktd202x to the OpenWrt image for the device
"Acer Connect Vero W6m" which is equipped with one KTD2026 controlling the
device's status LED via I2C.

Signed-off-by: George Oldfort <openwrt@10099.de>
Link: https://github.com/openwrt/openwrt/pull/16860
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 21:59:58 +01:00
George Oldfort
56d97fff55 generic: backport support for KTD2026/7 rgb(w) led controller
This commit adds the Linux kernel mainline driver "leds-ktd202x" for the
KinetIC KTD2026 and KTD2027 RGB/RBGW controller with I2C interface that was
introduced in kernel version 6.7, last changed in mainline on 2024-05-31.

At least the Acer Connect Vero W6m (a variant of the Acer Predator Connect
W6 without 2.5G eth1 port, usb3 port, and the 6 on-board gpio RGB LEDs) is
equipped with a KTD2026 (and a single RGB LED attached to it used by the
stock firmware as status LED), and maybe other router devices also are.

Signed-off-by: George Oldfort <openwrt@10099.de>
Link: https://github.com/openwrt/openwrt/pull/16860
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-28 21:59:58 +01:00
Petr Štetiar
620a7ef47f
config: build: remove experimental warning from USE_APK option
apk package manager is default for some time, so lets remove the
EXPERIMENTAL warning from the related option.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-28 18:36:06 +00:00
Petr Štetiar
08f12283c7
tools: ccache update to 4.10.2
Fixes since 4.10:

 * Fixed detection of Fmt version 11 and newer.
 * Fixed prefix command lookup from PATH.

Suggested-by: Jen Wolf <jenwolf@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/17105
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-28 18:34:55 +00:00
Daniel Golle
e48903a9ff meson: honor MESON_ARGS and MESON_HOST_ARGS when calling ninja
Set MESON_ARGS and MESON_HOST_ARGS when calling ninja for building.
This is required eg. to be able to set PYTHONPATH= not just for the
Meson (==configure) run but also for the build phase itself.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-11-28 15:53:32 +00:00
Daniel Golle
ee9eb91e0a gmp: use same source tarball for tools/gmp and package/libs/gmp
tools/gmp was using the .tar.xz while package/libs/gmp was using the
.tar.gz archive of the GMP release. Use the .tar.gz for both of them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-11-28 15:53:32 +00:00
Petr Štetiar
6f9384f4a4
base-files: fix manger->manager typo
It was reported, that a small typo sneaked in, so lets fix it.

Reported-by: @dave14305
Fixes: c19c31f7aa ("base-files: add migration information for APK")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-28 08:10:44 +00:00
Paul Donald
f4492b6b1c
netifd: update to Git 768027c5a7640137857f412f554227abd6160cdd (2024-11-27)
86da5cbcdb9d system-linux: do not pull ifindex/flags from netlink messages on rtnl events
cd96f61ba63e proto-shell: fix spurious interface teardowns with host deps
a39fe3a8b150 wireless: add support for adding a list of devices for a wifi-iface
d29cf707478c iprule: add ipproto property
768027c5a764 system-linux: restore reading flags from netlink messages

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17074
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-27 21:34:08 +00:00
Christian Marangi
3929ef4c21
uci: update to Git HEAD (2024-11-26)
10f7996ec294 file: Ignore config file with '.' in name

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-11-27 22:20:54 +01:00
Paul Spooren
c19c31f7aa
base-files: add migration information for APK
If the `apk` package manager is installed, show a table of common
commands to deal with the system.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-11-27 22:08:28 +01:00
Eric Fahlgren
c857145e03
build: profiles.json: add kernel version information
Currently downstream tools like ASU lack information about kernel
version to find out the relevant kmod build folder on downloads server.

So lets fix it by providing a new `linux_kernel` JSON array which would
for the start provide Linux kernel version, revision and vermagic
information.

  "linux_kernel": {
     "release": "1",
     "vermagic": "b57450c07d3a786158c3601fc5cee57d",
     "version": "6.6.61"
   },

Fixes: 
Fixes: 
Co-developed-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17042
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-26 22:47:00 +00:00
George Oldfort
1bdb6d8404 mediatek: remove ktd-202x driver filogic image (Aer Vero W6m)
Image build fails with PR  merged while PR  not merged.

Removing kmod-leds-ktd202x from filogic.mk will fix the build process.

Fixes: 2898d1d126 ("mediatek: add support for Acer Predator W6d and Acer Vero W6m")
Signed-off-by: George Oldfort <openwrt@10099.de>
Link: https://github.com/openwrt/openwrt/pull/17087
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-26 10:43:16 +01:00
Petr Štetiar
341cc047b9
Revert "target,base-files: unify handling of procd-ujail"
This reverts commit ac640718aa as it
removes base-files package when KERNEL_NAMESPACES is deselected, as
base-files depends on procd-ujail which needs KERNEL_NAMESPACES.

Fixes: 
Link: https://github.com/openwrt/openwrt/pull/17081
Link: https://github.com/openwrt/openwrt/pull/17081
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-11-26 05:07:33 +00:00
Robert Marko
5695267847 ramips: mt7621: support openwrt,netdev-name for renaming interfaces
Edgerouter X currently has its eth1 port on the switch missing since there
is a naming conflict currently.

So, as the root cause is mixing kernel support for DSA interfaces having
predictable names set via "label" property vs others having it assigned
dynamically lets avoid the conflict by using our own custom property as
suggested upstream [1].

So, add support via "openwrt,netdev-name" property and use it on ERX.

Fixes: 2a25c6ace8 ("ramips: get rid of downstream network device label patch")
Fixes: 
Link: https://github.com/openwrt/openwrt/pull/17062
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-25 16:41:30 +01:00
Petr Štetiar
72dec105fb openwrt-keyring: apk: use just snapshot key explicitly
Currently we're going to ship all the apk keys in the keyring, but the
preference is to ship and use single release/branch specific key so lets
use openwrt-snapshots.pem for apk explicitly as well.

Fixes: 2cea050024 ("openwrt-keyring: add apk public key for signing of package indexes")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/16852
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-25 12:20:59 +01:00
Petr Štetiar
118c657bd1 Revert "openwrt-keyring: fix missing 24.10 usign key by installing it"
This reverts commit 37784c48e9 as the
preference is to have single explicit key for each release/branch.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/16852
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-25 12:20:59 +01:00
Robert Marko
1f53b7fb75 qualcommax: ipq60xx: remove source-only flag
Its been a while since we added ipq60xx as source-only, it is now
quite usable so lets remove the source-only flag to start building
official images.

I also plan to merge additional popular boards rather soon.

Link: https://github.com/openwrt/openwrt/pull/17065
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-25 10:26:33 +01:00
John Audia
eed39d45c2 kernel: enable pressure interface
PSI provides a canonical way to see resource pressure increases as
they develop, with pressure metrics for three major resources:
memory, CPU, and IO. PSI stats are like barometers that provide
fair warning of impending resource shortages, enabling users to
take more proactive, granular, and nuanced steps when resources
start becoming scarce.

References:
* https://www.kernel.org/doc/html/latest/accounting/psi.html
* https://lwn.net/Articles/759781/

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/13819
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-25 00:15:41 +01:00
Mikhail Zhilkin
d413163832 mediatek: Routerich AX3000: add OpenWrt U-Boot layout
This commit adds OpenWrt U-Boot layout support for Routerich AX3000. The
aims:
1. Get open-source U-Boot;
2. Get maximum available free space in OpenWrt.

Install
-------
1. Copy OpenWrt ubootmod-bl31-uboot.fip, ubootmod-preloader.bin, to the
   /tmp folder of the router using scp.

2. Make mtd partitions backups:
   http://192.168.1.1/cgi-bin/luci/admin/system/flash -> Save mtdblock
   contents

3. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```

4. Write FIP and preloader:
```
insmod mtd-rw i_want_a_brick=1
mtd unlock BL2
mtd erase BL2
mtd write /tmp/ubootmod-preloader.bin BL2
mtd unlock FIP
mtd erase FIP
mtd write /tmp/ubootmod-bl31-uboot.fip FIP
```

5. Copy OpenWrt ubootmod-initramfs-recovery.itb to the tftp server root
   with IP 192.168.1.254.

6. Reboot router:
```
reboot
```
U-Boot will automatically download from the tftp server and boot OpenWrt
initramfs system.

7. Copy OpenWrt ubootmod-squashfs-sysupgrade.itb to the /tmp dir of the
   router using scp.

8. Run sysupgrade:
```
sysupgrade -n /tmp/squashfs-sysupgrade.itb
```

Recovery
--------
1. Place OpenWrt initramfs-recovery.itb image (with original name) on the
   tftp server (IP: 192.168.1.254).
2. Press "reset" button and power on the router. After ~10 sec release the
   button.
3. Use OpenWrt initramfs system for recovery.

BL2 and FIP recovery
--------------------
Use mtk_uartboot and UART connection if BL2 or FIP in UBI is destroyed:
Link: https://github.com/981213/mtk_uartboot

Return to stock:
----------------
1. Copy partition backups (BL2.bin and FIP.bin) to the /tmp dir of the
   router using scp.

2. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```

3. Restore stock U-Boot and reboot:
```
insmod mtd-rw i_want_a_brick=1
mtd unlock BL2
mtd erase BL2
mtd write /tmp/BL2.bin BL2
mtd unlock FIP
mtd erase FIP
mtd write /tmp/FIP.bin FIP
reboot
```

4. Open U-Boot web recovery, upload stock firmware image and start
   upgrade.
Link: http://192.168.1.1

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16791
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 23:41:02 +01:00
Mikhail Zhilkin
c0581520b1 uboot-mediatek: add Routerich AX3000 support
Add U-Boot replacement loader for Routerich AX3000.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16791
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 23:41:02 +01:00
Mauri Sandberg
ec839c786c ramips: dna_valokuitu-plus-ex400: clean-up image creation
Code cleanup. Simplify and unify how kernel image is passed to
Build/dna-bootfs

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 23:36:44 +01:00
Shiji Yang
0c57510ced ramips: mt76x8: disable unused Ralink systick driver
The mt76x8 series SoCs use the MIPS generic systick timer. Sync the
upstream Ralink systick driver changes and disable it for mt76x8
target to reduce the kernel size.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16844
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 23:28:53 +01:00
Hauke Mehrtens
b7dd70a0d7 kernel: usb: kmod-usb-audio: Fix dependency
Change the dependency on the kmod-media-controller from depends to
select.

Fixes: 1095925246 ("kernel: add kmod-media-controller dependency for kmod-usb-audio")
Link: https://github.com/openwrt/openwrt/pull/17058
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 22:51:14 +01:00
Hauke Mehrtens
ea2c860225 stm32: Remove unnecessary kernel options
These options are filtered out since some weeks, remove them also from
the new stm32 target.

Fixes: 851e7f77e4 ("stm32: add new stm32 target")
Link: https://github.com/openwrt/openwrt/pull/17058
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 22:51:14 +01:00
Hauke Mehrtens
eb7aa07a0e CI: labeler: Add stm32 target
Add a label for changes in the stm32 target.

Fixes: 851e7f77e4 ("stm32: add new stm32 target")
Link: https://github.com/openwrt/openwrt/pull/17058
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 22:51:14 +01:00
Hauke Mehrtens
a9d3c5b4c9 dropbear: bump to 2024.86
- update dropbear to latest stable 2024.86;
  for the changes see https://matt.ucc.asn.au/dropbear/CHANGES

Link: https://github.com/openwrt/openwrt/pull/17053
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 20:08:12 +01:00
Hauke Mehrtens
ed52345445 x86: Deactivate kernel options with extra overhead
Deactivate CONFIG_CONTEXT_TRACKING_USER_FORCE: Force user context
tracking: This is a testing feature which should not be activate in
production environments according to the Kconfig help. It adds an extra
overhead.

Deactivate CONFIG_RCU_NOCB_CPU_DEFAULT_ALL: Offload RCU callback
processing from all CPUs by default: This option should only be used in
aggressive HPC or real-time workloads which we do not have in OpenWrt.
For normal workloads it increases the number of context switches.

In the default Arch Linux kernel both options are not activated.

Fixes: 31111680f6 ("x86: switch config to a tickless kernel")
Link: https://github.com/openwrt/openwrt/pull/17057
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-24 20:03:59 +01:00
Robert Marko
a4bd42b790 config: dont select procd-seccomp via USE_SECCOMP
base-files is including procd-secccomp as a dependency when USE_SECCOMP
is selected, so there is no point in selecting the package directly here
as well.

Link: https://github.com/openwrt/openwrt/pull/17048
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-24 12:18:21 +01:00
Robert Marko
a48ec449cc config: rename SECCOMP to USE_SECCOMP
It seems that we have some kind of a symbol name conflict which causes
CONFIG_SECCOMP to always be read as y.

Unfortunatelly, I could not figure out what is causing this, but simply
renaming SECCOMP to USE_SECCOMP seems to properly work and leaves the
symbol unset unless arch dependencies are satisfied.

This fixes qoriq and others that dont support seccomp from failing due
to procd-seccomp package being selected to get included but it cannot be
built for them:
ERROR: unable to select packages:
  procd-seccomp (no such package):
    required by: base-files-1637~52b6c92479[procd-seccomp]

Fixes: 4c65359af4 ("build: fix including busybox, procd and apk/opkg in imagebuilder")
Link: https://github.com/openwrt/openwrt/pull/17048
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-11-24 12:18:21 +01:00
David Ignjic
faf4b3e0f7 mediatek: filogic: add support for Cudy WR3000S v1
Hardware
--------
MediaTek MT7981 WiSoC
256MB DDR3 RAM
128MB SPI-NAND (XMC XM25QH128C)
MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
UART: 115200 8N1 3.3V

MAC:
LAN MAC: label mac
WAN MAC: label mac + 1
2.4G MAC: label mac
5G MAC: label mac + 1 with LA bit set

Installation
------------

1. Connect to the serial port as described in the "Hardware" section.

2. Power on the device + press reset pin. Keep pressing reset pin to enter the U-Boot  shell.

3. Download the OpenWrt initramfs image. Place it on an TFTP server
   connected to the Cudy LAN ports. Make sure the server is reachable at
   192.168.1.88. Rename the image to "cudy3000s.bin"

4. Download and boot the OpenWrt initramfs image.

   $ tftpboot 0x46000000 cudy3000s.bin; bootm 0x46000000

5. Transfer the OpenWrt sysupgrade image to the device using scp.
   Install with sysupgrade.

Signed-off-by: David Ignjic <ignjic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16939
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-23 20:24:57 +01:00