Commit Graph

261 Commits

Author SHA1 Message Date
Petr Štetiar
9ba09653ad treewide: remove maintainer variable from targets
There is no such role as target maintainer anymore, one should always
send corresponding changes for the review and anyone from the commiters
is allowed to merge them or eventually use the hand break and NACK them.

Lets make it clear, that it is solely a community doing the maintenance
tasks.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Piotr Dymacz <pepe2k@gmail.com>
2020-03-16 22:21:45 +01:00
Christian Lamparter
b052b62efc apm821xx: 4.14: remove kernel config and patches
This patch removes the 4.14 kernel support from the apm821xx target.
The 4.19 kernel has been available and stable for a while and the 5.4
kernel support has been tested successfully on real hardware as well.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-03-14 15:17:32 +01:00
Sungbo Eo
90daff4cf8 build: image: move IMAGE_SIZE to image.mk
IMAGE_SIZE is widely used in many targets. Declare it in the default template to
clean up redundant code. This also prevents deriving IMAGE_SIZE unintentionally
from the previously defined device.

While at it, remove duplicate KERNEL_SIZE declaration.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-11 18:25:06 +01:00
Yousong Zhou
860652f4b9 kernel: 5.4: move some kconfig options to generic
CONFIG_64BIT_TIME=y
	CONFIG_KASAN_STACK=1
	CONFIG_UBSAN_ALIGNMENT=y
	CONFIG_UNIX_SCM=y
	CONFIG_DMA_DECLARE_COHERENT=y
	CONFIG_OF_RESERVED_MEM=y

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-03-10 10:05:50 +08:00
Koen Vandeputte
f9f62d43e4 kernel: bump 5.4 to 5.4.24
Refreshed all patches.

Compile-tested on: imx6
Runtime-tested on: imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
Koen Vandeputte
e64564920a kernel: bump 4.19 to 4.19.108
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
Koen Vandeputte
d5a3536631 kernel: bump 4.14 to 4.14.172
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-03-09 20:43:53 +01:00
David Bauer
0d727f231f treewide: move commonly disabled symbols to generic config
Move new commonly disabled kernel 5.4 symbols to the generic kernel
configuration.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-03-01 00:51:23 +01:00
Christian Lamparter
1c880f2324 apm821xx: remove gpio-interrupt cruft
This hunk became obsolete the moment when our
gpio-button-hotplug learned how to deal with
interrupt-supported gpio buttons. The gpio driver
never supported interrupt handling, so these
properties never served any use (outside of a
enhanced ppc4xx-gpio driver that was dropped).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-02-29 14:14:08 +01:00
Christian Lamparter
a2ae9a07d2 apm821xx: 5.4: add important NAND symbols
This patch adds important NAND config symbols.
These are necessary as otherwise the devices
won't find the rootfs on the NAND chips.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-02-28 22:47:04 +01:00
David Bauer
53ab9865c2 ath79: add support for kernel 5.4
Signed-off-by: David Bauer <mail@david-bauer.net>
[refreshed]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* Sync the patches with the changes done for kernel 4.19
* Use KERNEL_TESTING_PATCHVER
* Refresh the configuration
* Fix multiple compile bugs in the patches
* Only add own ag71xx files for kernel 4.19 and use upstream version for
  5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Christian Lamparter
e1e6ff6648 apm821xx: add linux kernel 5.4 testing support
This patch adds support for the linux kernel version 5.4
as an optional testing kernel.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-02-28 17:50:46 +01:00
Koen Vandeputte
20b5a4ca01 kernel: bump 4.19 to 4.19.101
Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 950-0202-staging-bcm2835-camera-fix-module-autoloading.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00
Koen Vandeputte
1b310cff0f kernel: bump 4.14 to 4.14.169
Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-04 18:10:13 +01:00
Rosen Penev
3c42293937 apm821xx: mbl_gen_hdd_img.sh: switch to /bin/sh
Nothing here needs bash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[add prefix to commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 01:28:08 +01:00
Koen Vandeputte
e115fa478f kernel: bump 4.19 to 4.19.90
Refreshed all patches.

Remove upstreamed:
- 010-dmaengine-dw-dmac-implement-dma-prot.patch
- 950-0148-Increase-firmware-call-buffer-size-to-48-bytes.patch
- 950-0206-Mailbox-firmware-calls-now-use-kmalloc-2749.patch
- 402-leds-trigger-netdev-fix-handling-on-interface-rename.patch

Fixes:
- CVE-2019-19332

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Add 010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-12-24 15:34:43 +01:00
Koen Vandeputte
7604e53d5f kernel: bump 4.14 to 4.14.159
Refreshed all patches.

Remove upstreamed:
- 302-0002-dmaengine-dw-implement-per-channel-protection-contro.patch

Fixes:
- CVE-2019-19332

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-12-24 01:22:45 +01:00
Petr Štetiar
3bbcffa0b6 treewide: kernel config: remove runtime options
Remove CC_HAS_ASM_GOTO, CC_IS_GCC and GCC_VERSION kernel config options
which are set at runtime and which should be ignored now.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-11-24 14:19:43 +01:00
Adrian Schmutzler
2c60de0e3f treewide: move MAC address patch functions to common library
This unifies MAC address patch functions and moves them to a
common script. While those were implemented differently for
different targets, they all seem to do the same. The number of
different variants is significantly reduced by this patch.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-14 12:36:02 +02:00
Adrian Schmutzler
5b6a809092 treewide: move calibration data extraction function to library
This moves the almost identical calibration data extraction
functions present multiple times in several targets to a single
library file /lib/functions/caldata.sh.

Functions are renamed with more generic names to merge different
variants that only differ in their names.

Most of the targets used find_mtd_chardev, while some used
find_mtd_part inside the extraction code. To merge them, the more
abundant version with find_mtd_chardev is used in the common code.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[rebase on latest master; add mpc85xx]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-13 21:48:58 +02:00
Adrian Schmutzler
c5b4fa20fa treewide: replace backticks by $(...) in gen_*_img.sh scripts
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Christian Lamparter
95f2bb24be apm821xx: fix fan control on highest step
This patch removes a typo (extra "0") so that the 'cpu-alert6'
step is triggered once the system reaches 85°C.

Note: Unless the WNDR4700 is placed in an hot oven, the
hardware-monitor will never reach this value.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Russell Senior
a03219ba09 apm821xx: remove unnecessary kernel padding
The allocation of LEBs to ubi volumes is handled by the sysupgrade script:

  package/base-files/files/lib/upgrade/nand.sh

and the ubimkvol and or ubirsvol command. Therefore, padding of the
kernel blob is not needed at all, so use cat instead of dd. The
BLOCKSIZE variable was only used in the dd command.  In any case, 63k
made no sense for the way BLOCKSIZE was being used.

63k (64512) does make sense for DTB_SIZE because of the offsets expected
by u-boot given extant u-boot-env variables.

Tested on Meraki MR24.

Signed-off-by: Russell Senior <russell@personaltelco.net>
2019-09-21 23:41:31 +02:00
Yousong Zhou
a089d55170 apm821xx: image: remove unused kernel.dtb from IMAGES
It's a leftover from 2271967f ("apm821xx: utilize build ARTIFACTs")

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-15 15:00:39 +00:00
Rafał Miłecki
641f6b6c26 treewide: use new procd sysupgrade $UPGRADE_BACKUP variable
It's a variable set by procd that should replace hardcoded
/tmp/sysupgrade.tgz.

This change requires the most recent procd with the commit 0f3c136
("sysupgrade: set UPGRADE_BACKUP env variable").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-05 23:33:19 +02:00
Rafał Miłecki
62dbe361a1 treewide: when copying a backup file always specify dest name
$CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz.
This change makes code more generic and allows refactoring $CONF_TAR.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-05 14:33:20 +02:00
Rafał Miłecki
bf39047872 treewide: don't hardcode "sysupgrade.tgz" file name
1) Add BACKUP_FILE and use it when copying an archive to be restored
   after sysupgrade (on the next preinit).
2) Use CONF_TAR for copying backup prepared by the /sbin/sysupgrade

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-05 14:33:19 +02:00
Rafał Miłecki
b6f4cd57e1 treewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" method
This explicitly lets stage2 know if partitions should be preserved. No
more "touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap" hack.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-08-22 13:47:51 +02:00
Adrian Schmutzler
b133e466b0
treewide: convert WiFi caldata size and offset to hexadecimal
This changes size and offset set for WiFi caldata extraction and
MAC address adjustment to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-cal-data in DTS files.

Since dd cannot deal with hexadecimal notation, one has to convert
back to decimal by simple $(($hexnum)).

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-14 12:36:37 +02:00
Adrian Schmutzler
75bfc393ba treewide: convert MAC address location offsets to hexadecimal
This changes the offsets for the MAC address location in
mtd_get_mac_binary* and mtd_get_mac_text to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-mac-address in DTS files.

(e.g. 0x1006 and 0x5006 are much more useful than 4102 and 20486)

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-14 12:10:12 +02:00
Koen Vandeputte
42d9bccadb kernel: bump 4.19 to 4.19.64
Refreshed all patches.

Remove upstreamed:
- 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch
- 950-0309-usb-dwc2-Disable-all-EP-s-on-disconnect.patch
- 950-0310-usb-dwc2-Fix-disable-all-EP-s-on-disconnect.patch

Fixes:
- CVE-2019-13648
- CVE-2019-3900
- CVE-2019-10207

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:52:47 +02:00
Koen Vandeputte
96f1d4b02b kernel: bump 4.14 to 4.14.136
Refreshed all patches.

Altered patches:
- 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch

Remove upstreamed:
- 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch
- 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch
- 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch

Fixes:
- CVE-2019-13648
- CVE-2019-10207

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-06 11:52:47 +02:00
Moritz Warning
62db9ce1c4 apm821xx: split up DEVICE_TITLE
Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-08-02 22:45:02 +02:00
Koen Vandeputte
c7634180fc kernel: bump 4.19 to 4.19.62
Refreshed all patches.

Remove upstreamed:
- 023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch
- 023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch
- 023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch
- 950-0252-staging-bcm2835_camera-Ensure-all-buffers-are-return.patch
- 950-0253-staging-bcm2835-camera-Remove-check-of-the-number-of.patch
- 950-0254-staging-bcm2835-camera-Handle-empty-EOS-buffers-whil.patch
- 950-0489-staging-mmal-vchiq-Replace-spinlock-protecting-conte.patch
- 0021-ARM-dts-gemini-Fix-up-DNS-313-compatible-string.patch
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch
- 100-MIPS-fix-build-on-non-linux-hosts.patch
- 303-MIPS-Fix-bounds-check-virt_addr_valid.patch
- 0002-usb-dwc2-use-a-longer-AHB-idle-timeout-in-dwc2_core_.patch

Altered patches:
- 950-0267-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch
- 700-net-add-qualcomm-mdio-and-phy.patch

Fixes:
- CVE-2019-3846

New symbol:
- AX88796B_PHY

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-31 16:51:46 +02:00
Rafał Miłecki
8b4bc7abe0 treewide: sysupgrade: don't use $ARGV in platform_do_upgrade()
stage2 passes image path to platform_do_upgrade() as an argument so it
can be simply accessed using $1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-07-17 08:05:38 +02:00
Koen Vandeputte
577174cf60 kernel: bump 4.19 to 4.19.56
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-25 16:46:01 +02:00
Christian Lamparter
6e2e8de75a apm821xx: move to 4.19 kernels
The 4.19 code has been available for some time now.
Since the f2fs / loop issue has been under control
I think it's time the target gets to move to it.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-24 20:22:24 +02:00
Christian Lamparter
bb93b71069 apm821xx: switch out kernel's CRC32 method
This patch replaces the OpenWrt' favoured
CRC32 Sarwate algorithm with the kernel
recommended SLICE8 CRC32 version.

This change alone lifted btrfs writes from 40 MiB/s
to 54 MiB/s on my My Book Live (SLICE4 managed 48 MiB/s).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-24 20:22:24 +02:00
Christian Lamparter
971f31bedc apm821xx: fix bogus key-presses on boot
"There are often transient line events when
the system is powered up and initialized and it
is often necessary for the gpio_chip driver to
clear any interrupt flags in hardware before
setting up the gpio chip, especially the
irqchip portions of it."
<http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html>

This patch adds a fix for the APM821XX's interrupt
controller to clear any bogus pending toggled
interrupts that happens on various APM821XX boards
on boot.

The patch also changes the debouce-interval from the
default 5ms debounce interval to 60ms all around.
The default setting caused on occasions that the button
state became stuck in a pressed state, even though the
button was released.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-20 19:58:27 +02:00
Koen Vandeputte
11b4d29ef5 kernel: bump 4.19 to 4.19.50
Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-12 15:04:09 +02:00
Koen Vandeputte
a7e68927d0 kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)
Refreshed all patches.

This bump contains upstream commits which seem to avoid (not properly fix)
the errors as seen in FS#2305 and FS#2297

Altered patches:
- 403-net-mvneta-convert-to-phylink.patch
- 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-06-12 15:04:09 +02:00
Christian Lamparter
06e63aad57 apm821xx: backport accepted linux-crypto patches to 4.19
This patch brings the crypto4xx driver up to the latest
upstream changes.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-02 11:08:38 +02:00
Christian Lamparter
dfa86b01e5 apm821xx: backport accepted linux-crypto patches to 4.14
This patch brings the crypto4xx driver up to the latest
upstream changes.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-02 11:08:38 +02:00
Christian Lamparter
1544df0d89 apm821xx: MX60: convert to interrupt-driven gpio-key driver
This patch converts the device to use the gpio-key
over gpio-key-polled driver.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-02 11:08:37 +02:00
Christian Lamparter
651adad603 apm821xx: MR24: convert to interrupt-driven gpio-key driver
This patch converts the device to use the gpio-key
over gpio-key-polled driver.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-02 11:08:37 +02:00
Christian Lamparter
9148cbcb7b apm821xx: WNDAP6X0: convert to interrupt-driven gpio-key driver
This patch converts the device to use the gpio-key
over gpio-key-polled driver.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-02 11:08:37 +02:00
Christian Lamparter
bd83592fc4 apm821xx: wndr4700: interrupt-driven gpio-keys
This patch fixes the active_low setting and
converts all of the physical keys on the wndr4700
to utilize the interrupt-driven gpio-keys driver
over the polled version.

The sdcard-insertion hack has been removed since the
block-subsystem will now be polling the device instead.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-05-31 10:30:03 +02:00
Petr Štetiar
00d14635db apm821xx: set mib-poll-interval on emac0 attached ar83xx switch
Commit "generic: ar8216: add mib_poll_interval switch attribute" sets
mib-poll-interval as disabled by default (was set to 2s), so it makes
switch LEDs trigger disfunctional on devices which don't have
mib-poll-interval set.

So this patch sets mib-poll-interval to 500ms on devices which have
ar83xx switch connected to emac0, as the same value was set for built in
switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch").

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-05-20 21:19:48 +02:00
Christian Lamparter
2d0c0abf5d apm821xx: WNDR4700: remove obsolete sd-card change detection
The SD-Card polling is now implemented by default in the
fs-tools block-mount utility package. It might not be as
fast as the current detection method since the polling
time is 2 Seconds, but it's much less of an hack.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-05-19 12:29:24 +02:00
Koen Vandeputte
86fd8cb435 kernel: bump 4.19 to 4.19.42
Refreshed all patches.

Remove upstreamed:
- 060-v5.1-serial-ar933x_uart-Fix-build-failure-with-disabled-c.patch
- 400-v5.2-leds-trigger-netdev-fix-refcnt-leak-on-interface-ren.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-13 19:17:41 +02:00
Koen Vandeputte
09050b6fe2 kernel: bump 4.14 to 4.14.118
Refreshed all patches.

Remove upstreamed:
- 060-v5.1-serial-ar933x_uart-Fix-build-failure-with-disabled-c.patch

Altered:
- 143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-13 19:17:41 +02:00
Klaus Kudielka
ad62247800 base-files: improve lib/upgrade/common.sh
Recently, upgrade device autodetection has been added to the mvebu target.
This exposes some shortcomings of the generic export_bootdevice function,
e.g. on the Turris Omnia: export_bootdevice silently reports the root
partition to be the boot device. This makes the sysupgrade process fail at
several places.

Fix this by clearly distinguishing between /proc/cmdline arguments which
specify the boot disk, and those which specify the root partition. Only in
the latter case, strip off the partition, and do it consistently.
root=PARTUUID=<pseudo PARTUUID for MBR> (any partition) and root=/dev/*
(any partition) are accepted.

The root of the problem is that the *existing* export_bootdevice in
/lib/upgrade/common.sh behaves differently, if the kernel is booted with
root=/dev/..., or if it is booted with root=PARTUUID=...

In the former case, it reports back major/minor of the root partition,
in the latter case it reports back major/minor of the complete boot disk.

Targets, which boot with root=/dev/... *and* use export_bootdevice /
export_partdevice, have added workarounds to this behaviour, by specifying
*negative* increments to the export_partdevice function.

Consequently, those targets have to be adapted to use positive increments,
otherwise they are broken by the change to export_bootdevice.

Fixes: 4e8345ff68 ("mvebu: base-files: autodetect upgrade device")
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-05-11 16:37:11 +02:00
Felix Fietkau
85017c40f4 build: add a config option for enabling a testing version of the target kernel
If the target supports a newer kernel version that is not used by default
yet, it can be enabled with this option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-11 11:37:10 +02:00
Koen Vandeputte
b765f4be40 kernel: bump 4.14 to 4.14.114
Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Remove upstreamed:
- 022-0006-crypto-crypto4xx-properly-set-IV-after-de-and-encryp.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-05-02 12:59:26 +02:00
Koen Vandeputte
8df12d76c6 kernel: bump 4.19 to 4.19.34
Refreshed all patches.

Removed:
- 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch

Altered:
- 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch
- 650-netfilter-add-xt_OFFLOAD-target.patch
- 662-remove_pfifo_fast.patch
- 332-arc-add-OWRTDTB-section.patch
- 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch
- 702-phy_add_aneg_done_function.patch

New symbols:
- ARC_IRQ_NO_AUTOSAVE
- SUN50I_ERRATUM_UNKNOWN1

Compile-tested: cns3xxx, imx6, sunxi
Runtime-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-04-08 14:53:39 +02:00
Koen Vandeputte
5387bc9cbb kernel: bump 4.14 to 4.14.111
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-04-08 14:53:39 +02:00
Christian Lamparter
7a1497fd60 apm821xx: MBL: set DEVICE_TYPE to NAS
The MyBook Live is a NAS.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-25 21:19:39 +01:00
kbuild test robot
91a7791115 apm821xx: usb: xhci: fix semicolon.cocci warnings
drivers/usb/host/xhci-pci.c:788:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 9e0fd1b52a ("apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [changed subject]
2019-03-13 16:25:37 +01:00
Christian Lamparter
ffd8ca18cc apm821xx: speed up ath9k-caldata extraction
Reading and writing to and from flash storage is slow and currently,
the ath10kcal_extract() scripts are even more at an disadvantage
because they use a block size of 1 to be able skip.

This patch reworks the extraction scripts to be much faster and
efficient by reading and writing the calibration data in possibly
one big block.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-02 12:59:48 +01:00
Koen Vandeputte
6b6f238b82 kernel: bump 4.19 to 4.19.21
Refreshed all patches.

Remove upstreamed:
- 0007-ARM-dts-Fix-up-the-D-Link-DIR-685-MTD-partition-info.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-02-14 16:45:01 +01:00
Christian Lamparter
f932137385 apm821xx: dts overhaul
- remove stray #address-cells / #size-cells

 - fix partition unit-addresses in wd-mybooklive.dts

 - remove index from MBL's gpio node name

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-24 15:53:03 +01:00
Petr Štetiar
cbb44f6ed7 apm821xx: dts: Unify naming of gpio-led nodes
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
2019-01-24 15:53:03 +01:00
Petr Štetiar
a692eecda1 apm821xx: dts: Unify naming of gpio-keys nodes
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
2019-01-24 15:53:03 +01:00
Stijn Tintel
a37098a2d0 kernel: bump 4.19 to 4.19.16
Refresh patches.
Remove upstreamed patches:
- backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch
- backport/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch
- backport/424-v4.20-net-dsa-fix-88e6060-roaming.patch
- hack/100-mtd-rawnand-qcom-fix-memory-corruption-that-causes-p.patch
- pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch
Update patch that no longer applies:
- backport/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch

Compile-tested: mesongx
Runtime-tested: mesongx

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-01-17 03:04:13 +02:00
Christian Lamparter
85be0f4c21 apm821xx: 4.14: sync config
This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-13 11:31:43 +01:00
Koen Vandeputte
f56a4e809b kernel: bump 4.14 to 4.14.91
Refreshed all patches.

Removed upstreamed:
- 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
Christian Lamparter
3801f8a7f7 apm821xx: MBL: fix kernel/apollo3g.dtb artifact build
The name for the artifact should have been apollo3g.dtb
and not kernel.dtb.

Fixes: 908bdbfce9f9 ("apm821xx: utilize build ARTIFACTs")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-05 22:09:08 +01:00
Christian Lamparter
257de1b01f apm821xx: sata: boot-part feature integration
This patch adds the boot-part feature to the apm82181 sata target.
This makes it possible to configure the boot partition size with
the generic CONFIG_TARGET_KERNEL_PARTSIZE symbol.

Please note: For people using custom images: Just like with
CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause
sysupgrade to repartition the device!

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
Christian Lamparter
7d009d8e6a apm821xx: use bin file extension for sysupgrade-tar images
Use the file extension bin for sysupgrade-tar images with
metadata to unify the file extension across the target/tree.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
Christian Lamparter
2271967f57 apm821xx: utilize build ARTIFACTs
The exported kernel dtbs can be build as artifacts.
This way, the MyBook Live's DTB is not generated twice.

While at it, give the artifacts their proper name.
For the wndr4700 use the "device-tree" partition name and
for the MyBook Live: "apollo3g.dtb" to match the mbl_boot.scr.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
Christian Lamparter
eb43efa997 apm821xx: fix MBL DUO SUPPORTED_DEVICES compat id
The MyBook Live DUO used "wd,mybooklive-duo" as the first
compatible string and not "wd_mybooklive-duo".

Fixes: 9b47aa93c7 ("apm821xx: unify My Book Live Single + Duo images")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-29 13:38:53 +01:00
Christian Lamparter
e59a6c8d4c apm821xx: switch MyBook Live's recovery images to multi-file
This patch converts the MyBook Live's recovery image to utilize the
multi-image method which integrates the device-tree binary directly
into the image.

The new initramfs can be loaded through the MyBook Live's U-boot
in the following way:

=> setenv ipaddr 192.168.1.1
=> setenv serverip 192.168.1.2
=> sata init; run addtty; tftp $kernel_addr_r wd_mybooklive-initramfs.bin; bootm
   Waiting for PHY auto negotiation to complete... done
   ENET Speed is 1000 Mbps - FULL duplex connection (EMAC0)
   Using ppc_4xx_eth0 device
   TFTP from server 192.168.1.2; our IP address is 192.168.1.1
   Filename 'wd_mybooklive-initramfs.bin'.
   Load address: 0x1000000
   Loading: ################################################ [...]
   done
   [...]
   Booting kernel from Legacy Image at 01000000 ...
      Image Name:    initramfs
      Image Type:   PowerPC Linux Multi-File Image (gzip compressed)
   [...]

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-28 00:45:57 +01:00
Christian Lamparter
4cd533411e apm821xx: 4.14: switch to upstream dw-dma-hport patch
This patch fixes the build regression on 4.14 build
due to dt-bindings/dma/dw-dmac.h MIA.

apm82181.dtsi:24:10: fatal error: dt-bindings/dma/dw-dmac.h: No such file or directory

Fixes: 32141c183a ("apm821xx: add linux 4.19 apm821xx patches")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-27 23:08:01 +01:00
Christian Lamparter
32141c183a apm821xx: add linux 4.19 apm821xx patches
This patch updates the apm821xx target to use the 4.19 kernel.

4.19 ships with all the crypto4xx driver patches. Furthermore,
the DW-DMA fix for the SATA controller has been backported from
4.20 and integrated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-27 14:36:23 +01:00
Christian Lamparter
1155793809 apm821xx: sata: set rootfs-part feature flag
The rootfs-part feature flag ensures that
CONFIG_ROOTFS_PART_SIZE symbol will be present
at all times.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-27 14:06:38 +01:00
Christian Lamparter
36c19c9f0b apm821xx: switch MX60(W)'s recovery images to multi-image method
In the past, the MX60(W)'s recovery images always had problems
with the size restriction and never really worked without manual
intervention. But starting with 4.19, the MX60(W)'s kernel image
outgrew the allocated space for sysupgrade images as well. Hence
This patch reworks the initramfs, which allows the device to ease
up on the impossible tight kernel size requirements for the
sysupgrade creation and packaging. And as a result, the now
orphaned special ramdisk setup is removed in the process.

This new initramfs can be loaded through the MX60(W) U-boot
in the following way:

=> setenv bootargs console=ttyS0,$baudrate
=> tftpboot $meraki_loadaddr meraki_mx60-initramfs-kernel.bin
   [...]
   Load address: 0x800000
    Loading: ################################################ [...]
    done
   [...]

=> bootm $fileaddr
   \## Booting kernel from Legacy Image at 00800000 ...
    ...

Updated Flashing instructions for new installations which integrates
the new recovery method. Users of existing installations that only
want to sysupgrade don't need to update their existing u-boot env.

=> setenv owrt_load1 ubi read \${meraki_loadaddr} kernel
=> setenv owrt_load2 ubi read \${meraki_loadaddr} recovery
=> setenv lede_bootkernel bootm \${meraki_loadaddr_kernel} - \${meraki_loadaddr_fdt}
=> setenv owrt_bootkernel bootm \${meraki_loadaddr}
=> setenv owrt_bootargs setenv bootargs console=ttyS0,\${baudrate} rootfstype=squashfs mtdoops.mtddev=oops
=> setenv owrt_boot run meraki_ubi owrt_bootargs\; run owrt_load1 meraki_checkpart lede_bootkernel\; run owrt_load2 owrt_bootkernel
=> setenv bootcmd run owrt_boot
=> saveenv

For more information and the latest flashing guide:
please visit the OpenWrt Wiki Page for the MR60:
<https://openwrt.org/toh/meraki/mx60#flashing>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-22 15:08:24 +01:00
Koen Vandeputte
fdd11a6eae kernel: bump 4.14 to 4.14.88
Refreshed all patches.

Altered patches:
- 180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Fixes CVE:
- CVE-2018-14625

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-14 13:01:49 +01:00
Koen Vandeputte
0028f86687 kernel: bump 4.14 to 4.14.86
Refreshed all patches.

Altered patches:
- 180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-10 11:48:44 +01:00
Christian Lamparter
0bce89037f apm821xx: WNDAP620: remove bad semicolon in dts after #include
This patch fixes a build warning triggered by a semicolon in
the dts after the #include directive.

netgear-wndap620.dts:11:33: warning: extra tokens at end of #include directive

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-09 15:27:34 +01:00
Christian Lamparter
bd3e234473 apm821xx: move fifo-entry-size property to WNDR4700
This property (and value) came from Netgear's WNDR4700
stock firmware dts. However, other devices do not set
it and the EMAC default is 16, which matches that of
the programming notes of the APM82181 spec.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-09 15:27:29 +01:00
Petr Štetiar
9da6cd40eb apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic diag.sh
I wanted to add status LEDs support to my imx6 based board and have found out,
that I could use diag.sh script found in ramips platform, which seems to be
also shared in a few other platforms:

 4801276bc2078c5bcf03003c831e3b0a target/linux/ramips/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ipq40xx/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ath79/base-files/etc/diag.sh

And @chunkeey suggested to me, that I can also add lantiq, ipq806x and
apm821xx to the list of platforms which could share this generic
diag.sh.

I've extended the base diag.sh in a way, that if it detects any of the
DTS LED aliases, then it would use the generic DTS set_led_state code.
The code in platform's diag.sh has moved to base-files package in this
commit:

 base-files: diag.sh: Make it more generic towards DTS so it could be reused

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Tested-by: Christian Lamparter <chunkeey@gmail.com> (apm821xx and ipq40xx)
2018-12-06 08:42:40 +01:00
Christian Lamparter
5d5c0b0582 apm821xx: wndr4700: restore sd-card media detection
This was not converted to the new, dt-based board name.

Fixes: e90dc8d272 ("apm821xx: convert to device-tree board detection")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-26 12:05:47 +01:00
Christian Lamparter
a2266a6d42 apm821xx: shuffle helper scripts to the front
In a patch for the ath79, Mathias Kresin mentioned that
helper scripts should be in front of the device targets.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-26 12:05:47 +01:00
Christian Lamparter
d82d84694e apm821xx: add support for the Netgear WNDAP620 and WNDAP660
This patch adds support for the Netgear WNDAP620 and WNDAP660,
they are similar devices, but due to the LAN LED configuration,
the switch setup and WIFI configuration each gets a different
device target.

Hardware Highlights WNDAP620:
CPU: AMCC PowerPC APM82181 at 1000 MHz
DRAM:  128 MB, 2 x 64 MiB DDR2 Hynix H5PS5162GF
CPU: AMCC PowerPC APM82181 at 1000 MHz
FLASH: 32 MiB, NAND SLC, Hynix HY27US08561A
Ethernet: RealTek RTL8363SB 2x2-Port Switch PHY - Only 1 GBit Port (POE)
Wifi: Atheros AR9380 minipcie - Dual-Band - 3x3:3
Serial: console port with RJ45 Interface (9600-N-8-1)
LEDS: Power, LAN-Activity, dual color LAN-Linkspeed, 2.4GHz, 5GHz LEDs
Button: Soft Reset Button
Antennae: 3 internal dual-band antennae + 3 x RSMA for external antennaes

Hardware Highlights WNDAP660:
CPU: AMCC PowerPC APM82181 at 1000 MHz + 2 Heatsinks
DRAM:  256 MB, 2 x 128 MiB DDR2
FLASH: 32 MiB, NAND SLC, Hynix HY27US08561A
Ethernet: RealTek RTL8363SB 2x2-Port Switch PHY (POE)
Wifi1: Atheros AR9380 minipcie - Dual-Band - 3x3:3
Wifi2: Atheros AR9380 minipcie - Dual-Band - 3x3:3
Serial: console port with RJ45 Interface (9600-N-8-1)
LEDS: Power, LAN-Activity, 2x dual color LAN-Linkspeed, 2.4GHz, 5GHz LEDs
Button: Soft Reset Button
Antennae: 6 internal dual-band antennae + 3 x RSMA for external antennaes

Flashing requirements:

 - needs a tftp server at 192.168.1.10/serverip.
 - special 8P8C(aka RJ45)<->D-SUB9 Console Cable
   ("Cisco Console Cable"). Note: Both WNDAP6x0 have
   a MAX3232 transceivers, hence no need for any separate
   CMOS/TTL level shifters.

External Antenna:
The antennae mux is controlled by GPIO 11 and GPIO14. Valid Configurations:
 = Config# = | = GPIO 11 = | = GPIO 14 = |  ===== Description =====
      1.     |   1 / High  |  0 / Low    | Use the internal antennae (default)
      2.     |   0 / Low   |  1 / High   | Use the external antennae

The external antennaes are only meant for the 2.4 GHz band.

One-way Flashing instructions via u-boot:

 0. connect the serial cable to the RJ45 Console Port
    Note: This requires a poper RS232 and not a TTL/USB adaptor.

 1. power up the AP and interrupt the u-boot process at

    'Hit any key to stop autoboot'

 2. setup serverip and ipaddr env settings
    Enter the following commands into the u-boot shell
    # setenv ipaddr 192.168.1.1
    # setenv serverip 192.168.1.10

 3. download the factory.img image to the AP
    Enter the following commands into the u-boot shell

    # tftp ${kernel_addr_r} openwrt-apm821xx-nand-netgear_wndap660-squashfs-factory.img

 4. verfiy image integrity
    Enter the following commands into the u-boot shell

    # crc32 $fileaddr $filesize

    If the calculated crc32 checksum does not match, go back to step 3.

 5. flash the image
    Enter the following commands into the u-boot shell

    # nand erase 0x110000 0x1bd0000
    # nand write ${kernel_addr_r} 0x110000 ${filesize}

 6. setup uboot environment
    Enter the following commands into the u-boot shell

    # setenv bootargs
    # setenv fileaddr
    # setenv filesize
    # setenv addroot 'setenv bootargs ${bootargs} root=/dev/ubiblock0_0'
    # setenv owrt_boot 'nboot ${kernel_addr_r} nand0 0x110000; run addroot; run addtty; bootm ${kernel_addr_r}'
    # setenv bootcmd 'run owrt_boot'
    # saveenv

 7. boot
    # run bootcmd

Booting initramfs instructions via u-boot:

 Follow steps 0 - 2 from above.

 3. boot initramfs
    Enter the following commands into the u-boot shell

    # tftp ${kernel_addr_r} openwrt-apm821xx-nand-netgear_wndap660-initramfs-kernel.bin
    # run addtty
    # bootm ${kernel_addr_r}

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-26 12:05:46 +01:00
Christian Lamparter
fb4bed5fe9 apm821xx: import gpio-export DT code from lantiq
This will come in handy for the Netgear WNDAP620's antennae mux.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-26 12:05:46 +01:00
Christian Lamparter
f6968952df apm821xx: MR24: add to uboot-envtools
This patch adds the complicated u-boot
environment access settings for to the
MR24 target.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-26 12:05:46 +01:00
Koen Vandeputte
bc3d47cd12 kernel: bump 4.14 to 4.14.78
Refreshed all patches.

Remove upstreamed:
- 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-22 15:28:31 +02:00
Christian Lamparter
fc70276e6c apm821xx: add disk-activity triggers via DT.
The WNDR4700 and the MBL have a dedicated HDD activity LED.
This patch adds the default led triggers to the DTS and
removes the entries in 01_leds.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-10-20 16:13:39 +02:00
Christian Lamparter
1d5d77612f apm821xx: apm82181.dtsi overhaul
- order entries by mmio address where possible

 - switch to lower-case address values

 - comment on BSP u-boot behaviour in regards to
   what it edits and look for

 - annotate irq lines with the help of interrupt-names

 - remove deprecated "device_type" properties
   The pci and network device_type had to stay since
   they are required by the drivers and u-boot.
   the cpu and memory device_types will remain as well
   as they are still part of the DT Spec.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-10-20 16:13:39 +02:00
Christian Lamparter
9ca82c2374 apm821xx: force WNDR4700 console to 115200n8
With the upcoming 4.19 release, the serial console on the
Netgear WNDR4700 would no longer work as it is never really
set and always relied on the kernel's serial code not to
change the baud rate.

On the stock firmware, Netgear forced the console setting
through a custom CONFIG_CMDLINE in their kernel to 115200.
Normally, they should have done it in a different way and
just passed the baudrate through a "console=..." kernel
parameter via the bootargs in the "/chosen" dt node.
But in their default u-boot bootcmd setting, they somehow
forgot to add the "run addtty", so there's no easy way to
pass the baudrate from u-boot to the kernel. So it has
to be forced as otherwise it ends up as 9600 baud.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-10-20 16:13:39 +02:00
Christian Lamparter
68bb91018d apm821xx: set uart compatible to ns16750
The APM821XX/PPC460EX datasheet mentions:
"Register compatibility with 16750 register set"

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-10-20 16:13:39 +02:00
Mathias Kresin
80c61c161a treewide: use wpad-basic for not small flash targets
Add out of the box support for 802.11r and 802.11w to all targets not
suffering from small flash.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Mathias did all the heavy lifting on this, but I'm the one who should
get shouted at for committing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 15:07:41 +01:00
Koen Vandeputte
0d0bd8e6da kernel: bump 4.14 to 4.14.76
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-16 10:08:56 +02:00
Christian Lamparter
64756a9a30 apm821xx: net: emac: fix fixed-link setup for the RTL8363SB switch
On the Netgear WNDAP620, the emac ethernet isn't receiving nor
xmitting any frames from/to the RTL8363SB (identifies itself
as a RTL8367RB).

This is caused by hardware not knowing the right forced link
settings (speed, duplex, pause, etc.) settings.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Christian Lamparter
c417aee9f1 apm821xx: fix dtc compiler warnings for MX60(W) and MR24's dts files
This patch fixes some of the dtc warnings:

MR24:
"reg" property in [...]mdio/phy@1 has invalid length (4 bytes)
Node [...]button@1 has a unit name, but no reg property
Relying on default #address-cells value for [...]phy@1
Relying on default #size-cells value for [...]phy@1

MX60(W):
Node [..]nand/all has a reg or ranges property, but no unit name
Node [..]button@1 has a unit name, but no reg property

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Christian Lamparter
2a926b1a0a apm821xx: remove wd, mybooklive-duo leftovers
The unification of the My Book Live Single and duo image in
commit 9b47aa93c7 ("apm821xx: unify My Book Live Single + Duo images")
made the wd,mybooklive-duo obsolete in most places and can
be removed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Christian Lamparter
63a7cf6791 treewide: replace 'linux, stdout-path' with 'stdout-path'
This follows a similar upstream patch by Rob Herring:

|commit 78e5dfea84dc15d69940831b3981b3014d17222e
|Author: Rob Herring <robh@kernel.org>
|Date:   Wed Feb 28 16:44:06 2018 -0600
|    powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
|
|    'linux,stdout-path' has been deprecated for some time in favor of
|    'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'.
|    Search and replace all the of occurrences with 'stdout-path'.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Koen Vandeputte
e9d92bf1e1 kernel: bump 4.14 to 4.14.72
Refreshed all patches.

Removed upstreamed:
- 203-MIPS-ath79-fix-restart.patch
- 0013-MIPS-ath79-fix-system-restart.patch
- 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch
- 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch
- 700-1-6-e1000e-Remove-Other-from-EIAC.patch
- 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
- 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch
- 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-26 15:54:18 +02:00
Freddy Leitner
7aa5dc46ee apm821xx: MBL: load kernel/dtb from SATA 0:1 first
This remedies an issue with the MBL Duo if both disks are inserted
and contain OpenWrt. kernel and dtb would be loaded from SATA 1:1
while rootfs (/dev/sda2) would be mounted on SATA 0:1.

Such a mix&match would obviously only work if both OpenWrt versions/
builds are identical, and especially fail after sysupgrade upgraded
the system disk on SATA 0:1.

The fallback to SATA 1:1 needs to be kept for MBL Single (only has
SATA 1:1) and MBL Duo with one disk inserted on SATA 1:1. To speed
up booting in those cases, the unneccesarily doubled "sata init"
will only be called once. (In theory it could be omitted completely
since the on-flash boot script already initializes SATA to load the
on-disk boot script.)

Tested on MBL Duo (all possible combination of disks) and MBL Single

Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Freddy Leitner <hello@square.wf>
2018-08-29 09:43:10 +02:00
Paul Wassi
e348ccc4e6 treewide: fix some cosmetic glitches in dts files
- fix single spaces hidden by a tab
- replace indentation with spaces by tabs
- make empty lines empty
- drop trailing whitespace
- drop unnecessary blank lines

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-08-27 19:31:17 +02:00