On some Cortex A9 platforms (Qemu 4.2.1 PBXA9), the IRQ status register is not
reliable. Sometimes, it indicates an IRQ too early, i.e., shortly before the
counter wraps. Therefore we have to accomplish wrap detection via counter
comparison only. We check whether the current counter value is higher than the
start counter value of the current timeout.
However, this implies that we have to take care to always read out the counter
before it hits the max timout value again. And, therefore, the max timeout
value has to be far away from the first value the counter has after wrapping.
Consequently, we propagate a max timeout value of half the max counter value.
Fixes#4209
* Modernize routines, eliminate pointers, use constructibles, etc.
* Use absolute time instead of relative time consumption when
updating the scheduler
Ref genodelabs/genode#4151
This commit fixes two issues with the timeout lib and the base-hw src recipe:
* Add source files of timeout lib to recipe content.
The files weren't copied to the depot until now. However, the archive
nonetheless built successfully because of the second issue that is described
below.
* Get rid of the usage of the BASE_DIR variable in the timeout lib.
The BASE_DIR variable always resolves to the repos/base directory even when
building in a depot. That said, the use of BASE_DIR in make-files that are
not part of the build system itself must be avoided. Instead, REP_DIR,
REP_INC_DIR, and $(call select_from_repositories, ...) should be used.
Ref #4209
This patch refines the rules for generating a base-hw src archive
for a given board by enumerating the content of the lib/mk/spec/*
directories instead of including entire directories. This avoids
the inclusion of lib.mk files found in SoC-specific repositories
(like genode-allwinner) in the kernel source archives.
When building a binary archive from such a src archive with the changes
of issue #4599, the build system would otherwise try (and fail) to build
the libraries for the accidentally included lib.mk files.
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
This commit introduces a hypervisor calling interface. The host kernel can
use it to either switch to a guest VM, or to invalidate the TLB with
regard to a specified VM id.
The VM-specific TLB invalidation is called whenever a VM (Vcpu)
gets destroyed.
Fixgenodelabs/genode#4528
When a PD gets deleted check whether it is active on the current CPU resp. MMU.
If yes, switch to core/kernel's PD to prevent that invalid page-tables or
address-space IDs are still in use. Moreover, whenever we switch to an idle
thread, we switch to kernel/core's PD too. Thereby, we prevent that vanished
PDs are still active on CPUs different from the one, where the core entrypoint
is active, which does the PD deletion.
This whole scheme is only valid under the assumption that core has only one
entrypoint running on one CPU.
Fixgenodelabs/genode#4527
Do not only distinguish core and user threads, but the idle threads too.
Instead of a boolean value, introduce a new thread type.
Ref genodelabs/genode#4527
Genode code already expects MMU to be disabled when starting the
kernel. It is enabled eventually in Bootstrap::Platform::enable_mmu,
after setting up translation tables. Unfortunately nothing ensures
this is actually the case. If MMU happens to be enabled when entering
the kernel things go downhill pretty fast after we start messing with
TTBR.
This patch ensures MMU is disabled for EL1, EL2, EL3 dependent on the
exception level of the CPU core, which is entering the kernel.
This should allow base-hw to start correctly on Quartz64 A board.
The `lookup_translation` function got introduced and is used only in the
context to proof whether a cache maintainance function can be executed
safely by the kernel. Unfortunately, it did not checked write permissions,
which can lead to permission faults. This commit restricts the lookup
function to only succeed when the target page is writeable. Consequently,
the lookup function gets renamed to `lookup_rw_translation`.
Fixgenodelabs/genode#4348
According to ARM Cortex-A55 Core Technical Reference Manual r1p0 the
lowest 8 bits (Aff0) of MPIDR register represent thread IDs within a
multi-threaded core. The actual core identification bits are in Aff1.
This layout can be identified by checking the MT bit of MPIDR register.
Basically, if MT=1 core id is in Aff1, if MT=0 core id is in Aff0.
Without this change Genode will identify all CPU cores on A55 as primary
(0) core.
Its worth to mention that Cortex-A55 by itself is not a multi-threaded
CPU. Aff0 values are always expected to be 0 for pure A55 cores. A55
cores can however be paired with cores that are multi-threaded. To
support such big.LITTLE CPUs in Genode we'd probably need to add a
different mechanism for mapping MPIDR values to logical, contignous
core IDs which Genode expects.
Ref:
https://developer.arm.com/documentation/100442/0100/register-descriptions/aarch64-system-registers/mpidr-el1--multiprocessor-affinity-register--el1?lang=en
The soft ABI implies purely software floating point implementation.
This is not the case for Genode however. For example core's
exception_vector.S uses vmsr instruction. This builds fine with with
GCC based toolchain, but clang with integrated-as complains:
src/core/spec/arm/exception_vector.S:122:2: error: instruction requires: VFP2
vmsr fpexc, r1
^
Fix this by passing softfp to mfloat-abi command on ARMv7. This allows
usage of FP HW, but implies soft-floating point ABI.
Issue #4421
According to C++11 reference:
"If the strictest (largest) alignas on a declaration is weaker than
the alignment it would have without any alignas specifiers (that is,
weaker than its natural alignment or weaker than alignas on another
declaration of the same object or type), the program is ill-formed:"
https://en.cppreference.com/w/cpp/language/alignas
The code requests 4 byte alignment for Genode::Arm_cpu::Context.
The Context structure inherits Genode::Arm_cpu::Fpu_context which
has minimum alignment requirement of 8 bytes, due to uint64_t d0_d31
member. This makes the 4 byte value in Context's alignas specifier
invalid (smaller than allowed minimum).
Similar situation takes place in Arm_64 case. The claimed minimum
alignment of Context is 8 bytes, but the fpu_state member imposes 16
bytes alignment (explicitly specified in Fpu_state declaration).
In both cases the code builds fine with GCC 8.3.0, but fails with
clang which claims that "requested alignment is less than minimum
alignment of X for type", where X is 8 on ARM and 16 on AArch64.
Ref: https://eel.is/c++draft/dcl.align#5
Issue #4421
Even though the use of the C++ exception mechanism (and the implicit use
of the cxx heap) is not a problem at the server side, this patch
nevertheless replaces the exception-based return-value handling to make
the code consistent with the ipc_call path.
Issue #3612
On some boards or emulators a CPU might be executing in hyp mode
when entering Genode's bootstrap code. In that mode the 'cps' instruction
is not defined. Therefore, we change the way the boot cpu is identified.
Ref #3415
* renamed rpi pic to Bcm2835_pic
* renamed rpi3 pic to Bcm2837_pic
* added bcm2837 control for setting prescaler value (to fix timer_accuracy)
* changed handling of all interrupts for rpi3 by cascading to bcm2835 pic
* rpi3 irq controller base address made consistent with rpi
* added usb controller memory region for pic on rpi3 (for SOF interrupts)
Ref #3415
This patch improves the robustness of the CPU-affinity handling.
- The types in base/affinity.h received the accessors
'Location::within(space)' and 'Affinity::valid', which alleviates
the fiddling with coordinates when sanity checking the values,
in init or core.
- The 'Affinity::Location::valid' method got removed because its
meaning was too vague. For sanity checks of affinity configurations,
the new 'within' method is approriate. In cases where only the x,y
values are used for selecting a physical CPU (during thread creation),
the validity check (width*height > 0) was not meaningful anyway.
- The 'Affinity::Location::from_xml' requires a 'Affinity::Space'
as argument because a location always relates to the bounds of
a specific space. This function now implements the selection of
whole rows or columns, which has previously a feature of the
sandbox library only.
- Whenever the sandbox library (init) encounters an invalid affinity
configuration, it prints a warning message as a diagnostic aid.
- A new 'Affinity::unrestricted' function constructs an affinity that
covers the whole affinity space. The named functions clarifies
the meaning over the previous use of the default constructor.
- Core's CPU service denies session requests with an invalid
affinity parameter. Previously, it would fall back to an
unrestricted affinity.
Issue #4300
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
