Until now, Genode's Linux system call bindings were based on original
Unix system calls that were later superseded by more flexibile variants.
E.g., 'openat' is a modern version of 'open'. Even though Linux upholds
the compatiblity with the original versions for existing architectures
like x86, the legacy syscalls are absent for the recently added AARCH64
architecture. A good overview of the system calls accross the prominent
architectures can be found at
https://chromium.googlesource.com/chromiumos/docs/+/master/constants/syscalls.md
This patch updates Genode's syscall bindings to avoid legacy versions,
thereby easing the support for AARCH64. The used "modern" versions
were introduced back in Linux version 2 days. So we are fine to rely
on them.
The patch slightly changes the signature for lx_stat because this system
call is merely used to check for the existance of a file and its size.
The new name 'lx_stat_size' draws a closer connection to its use case.
That said, the stat syscall has not been updated to the modern statx
since statx is still a fairly recent addition.
Issue #4136
This patch simplifies the use of the clone system call for creating
processes and threads. Until now, the binding used an opaque pointer
argument to pass context information to the newly created process or
thread. However, upon close inspection, this is not a strict
requirement.
A newly created thread accesses its contextual information by
using its stack pointer as key. The pointer argument is not used.
The creation of processes is strictly serialized because the
intermediate stack used in-between clone and execve is a global
variable. Since we rely on the serialization anyway, we can pass the
context information of a new process via a global variable as well.
This change simplifies the syscall binding for the upcoming AARCH64
support, which would otherwise require us to deal with the notion
of TLS on Linux.
Issue #4136
With the update to GCC 10, the compiler stopped with an error when compiling
places where a MAC address is copied from outside into a packed object using
the Net::Netaddress::copy method (e.g. in
Net::Arp_packet::dst_mac(Mac_address)):
! error: writing 6 bytes into a region of size 4 [-Werror=stringop-overflow=]
While trying to find a clean solution for this error, I found posts on
gcc.gnu.org and github that stated that the size calculations that cause these
errors are incorrect. Indeed, I could verify that the actual size of the two
regions was static and exactly the same in places were the error occured.
Furthermore, I couldn't find a way of making it more clear to the compiler
that the sizes are the same. By accident, we found that using the address of
the first element of the array that forms the second region instead of the
array address itself, somehow circumvents the error.
Fixes#4109
With the update to GCC 10 the compiler used to warn when using the internet
checksum functions on packet classes (like in
Net::Ipv4_packet::update_checksum):
warning: converting a packed ‘Net::[PACKET_CLASS]’ pointer
(alignment 1) to a ‘const uint16_t’ {aka ‘const short
unsigned int’} pointer (alignment 2) may result in an
unaligned pointer value
Apparently, the 'packed' attribute normally used on packet classes sets the
alignment of the packet class to 1. However, for the purpose of the
internet-checksum functions, we can assume that the packet data has no
alignment. This is expressed by casting the packet-object pointer to a pointer
of the new packed helper struct 'Packed_uint16' that contains only a single
uint16_t member before handing it over to the checksum function (instead of
casting it to a uint16_t pointer).
Ref #4109
The NAT feature of the NIC router used to prefer re-using source ports that
have been freed recently. From an external server's perspective, if a client
dies and restarts, chances are high that the new connect arrives with the same
source-IP/source-port as the old connection. The server has to forcefully reset
the connection. If that happens a lot, the server may even start to ignore
further connections from this IP/port combination for a while as a mitigation.
This patch adds a continuous counter feature that makes sure that every new
port allocation will increment and result in a port that hasn't been used for a
long time.
The NAT feature of the nic_router is now more in line with RFC 6056 chapter 4.
Ref #4086
pthread.0 acquires a write buffer mutex and calls potentially
blocking fs operations. The EP thread handles session requests and tries to
acquire the same write buffer lock. IO progress events for pthread.0 are
handled by the EP thread, which however is blocking on the write buffer mutex.
The commit uses two write buffers, one which is filled by the EP and a second
which is used by pthread.0. The two buffers are swapped protected by a mutex
without invoking blocking fs operations.
Issue #4095
The exec_terminal generates a config report which is used as input ROM for
sandbox/init, which does not support an "<empty>" node.
An empty config node is empty, without an node.
Issue #4095
Was still using the event_filter.config from drivers_interactive-pc
although a dedicated file is present in the raw archive.
The fix is just for consistency reasons, as sculpt manager is generating the
event_filter.config anyway.
KEY_UNKNOWN is a collective symbols for all unknown keycodes.
Remapping thus requires iterating through all corresponding codes
instead of only applying the policy to the first match.
Issue genodelabs#4069
This patch increases the RAM quota of the top-level nitpicker instance
to 12 MiB so that resize operations can be buffered for resolutions up
to 2560x1080. It mutes diagnostic messages of the form "Warning: Gui
(...) not enough RAM to preserve buffer content during resize" and
improves the window-resize experience.
With this patch, the user is able to re-gain access to the inspect view
by toggling the inspect button of a file system unrelated to the failed
USB storage device.
Fixes#4090
Issue #3967
triggers using -O0 with test-libc_integration:
libc_integration/main.cc:146: undefined reference to `std::istream::operator>>(unsigned long&)'
contrib/stdcxx-80f380143250d4f951433876698b54fdac32b95f/include/stdcxx/std/thread:67: undefined reference to `vtable for std:🧵:_State'
Introduce a new _overflowed state variable to indicate whether the
horizontal boundary was reached already and to omit subsequent character
output.
This state is necessary to maintain a valid cursor position at all
times. The _overflowed attribute is reset once the cursor is moved into
a valid position again.
To harmonise the bounds checking for _cursor_pos modifications, the
`constrain()` method was added.
Fixesgenodelabs/genode#4093
Also fixes a bug in `vpa()` and `vpb()` which moved the cursor
horizontally instead of vertically.
The direct execution of application-level code by a watch handler is
troublesome because those handlers are executed at the I/O signal level.
In the concrete case, the watch handler got recursively called because
the handler called _handle_config (application-code), which called the
VFS, which in turn performed a wait_and_dispatch_one_io_signal, which
again invoked the watch handler.
The patch works around the problem by letting the watch notification
trigger the application-level signal for the _config_handler.
Fixes#4091
I created a test program which stresses the interplay between libc,
pthreads and vfs_pipe and may detect regressions.
The program starts a thread that spawns a bunch of workers, sends and
receives data to them through a pipe. When all data of a worker is
collected, the worker is finished (join()) and a new worker is started.
Both the number of bytes sent to the worker and the size of its
answer are random.
Issue #3967
* The device XML information dataspace is only provided,
when the client's policy states `info="yes"`
* The device XM information gets changed to include the
physical resource names (I/O memory and IRQ addresses)
instead of virtual ids and page offset
Fix#4077
As linux drivers may distinguish device configuration by pci subdevice id in
addition to the pci device id, the former must also be used for finding the
matching entry. Otherwise, e.g., the iwlwifi driver might load the wrong
firmware.
Side note: Add break statement to save superfluous iterations after
match was identified.
Fixes genodelabs#4076
This is a follow-up fix for "Streamline platform-device API on ARM".
There is an ambiguity of the 'local_addr' method between the inherited
'Attached_dataspace' and the local declaration, which results in the
double application of the sub-page Range::start.
Issue #4075
This compilation unit contains a global constructor, which violates our
assumption that the libc is free of global constructors on ARMv7.
Specifically, the graphical terminal fails with the following message:
[init -> terminal] Error: Component::construct() returned without executing
pending static constructors (fix by calling
Genode::Env::exec_static_constructors())
[init -> terminal] Error: Uncaught exception of type 'Linker::Fatal'
In this case, the libc-less terminal uses the VFS. The VFS mounts the
ttf VFS plugin. The ttf VFS plugin depends on the libc.
The compilation unit 'arm_initfini.c' can safely be excluded because it
merely initializes the global '_libc_arm_fpu_present' variable, which
is not used by the current version of our libc/libm.
Fixes#4080
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of
- Platform::Device - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq - interface for receiving device interrupts
The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.
Fixes#4075
This patch adjusts the matching of the IP address such that the external
IP address is used as opposed the the NAT-local address. It is follow-up
fix of the conversion to the uplink session interface.
Issue #3961
When we allowed symbol resolution during exceptions, we used the shared
object lock to protect ELF object list manipulation (e.g., dlopen,
dclose) when executing exception unwinding code in the linker.
Unfortunately, sometimes libraries that are loaded by 'dlopen' may raise
exceptions in the process, leading to a deadlock within the unwind code.
In order to resolve this, we now protect the object list operations
(i.e., enqueue, removal, iteration) by a separate mutex. This allows
the shared object interface to throw exceptions.
issue #4071
This patch unifies the core-internal 'Mapping' type across all base
platforms.
As one minor downside on seL4, the diagnostic error messages when
observing faults other than page faults no longer print the faulting
thread and PD names.
Issue #2243
These messages pollute the boot log of Sculpt OS when ROM modules are
requested for files of the config fs before the sculpt manager has
created their first version.
When the own cap quota of a client does not suffice for a cap upgrade of
an existing session to a server, the client must issue a cap-resource
request to the parent. This logic was already in place for RAM quota but
was missing for cap quota.
Issue #4072
When callback functions of `dl_iterate_phdr` required further jump slot
relocations this lead to a deadlock. Therefore, we allow the resolution
of further symbols from callback functions, but protect the ELF object
list during the iteration, which blocks any dynamic loading (e.g.,
dlopen/dlcose) of shared object by other threads while in program header
iteration.
fixes#4071
Apparently the skewed motion timings came from the issue fixed by
"timer: restore semantics of periodic timeout 0". With the current
version of the timer, the original motion parameters work just fine.
This patch extends the 'Platform_session::alloc_dma_buffer' interface
with a 'Cache' argument that corresponds to the argument accepted by
'Ram_allocator::alloc', which is used by the platform driver under the
hood.
Since the x86 platform driver used to be hardwired to allocate DMA
buffers as UNCACHED, I adjusted all drivers by specifying the UNCACHED
argument. Right now, this is needed as a hint for core to steer the
allocation of I/O page tables. Once we eliminate the need for such hints
(by introducing an explicit 'Region_map::attach_dma' operation), we can
revisit the drivers individually because cached DMA buffers should
generally be fine on the x86 architecture.
Issue #2243
This change avoids many repetetive Genode:: prefixes, making the code
easier to read. The patch also includes a few consistency fixes
regarding include guards and file headers. It also renames
Platform_device::String to Platform_device::Device:name.
Issue #2243
This patch adds the designated alternative to Dataspace::phys_addr to
the platform-session interface. Under the hood, the platform driver
still calls Dataspace::phys_addr but it should eventuelly become the
only caller before we can abolish this function.
Issue #2243
This commit optimizes the 'Child::resolve_session_request'
implementation by introducing an internal 'Route_model' for quickly
traversing routing rules instead of parsing XML on each session request.
Fixes#4068
This commit replaces the hand-crafted config processing by the use of
the 'List_model' utility. This has the following advantages:
- The parsing follows a common formalism that makes the code
easier to maintain and to understand. Several parts of the code
had to be changed (for the better) to make it fit the list model
approach. E.g., the child states have become more expressive
and logical.
- In the common case, the XML data is traversed only once, which
increases the parsing speed in dynamic scenarios.
- The code becomes easier to optimize. In particular, the patch skips
the re-evaluation of the session routing if no service is affected
by the config change.
The patch also revisits the init test by removing overly long sleep
phases and extending a few sleep phases that were too short when
executing the test on Qemu.
Issue #4068
This patch changes the 'alloc_aligned' interface as follows:
- The former 'from' and 'to' arguments are replaced by a single
'range' argument.
- The distinction of the use cases of regular allocations vs.
address-constrained allocations is now overed by a dedicated
overload instead of relying on a default argument.
- The 'align' argument has been changed from 'int' to 'unsigned'
to be better compatible with 'addr_t' and 'size_t'.
Fixes#4067
This patch avoids the RTC driver's aggressive polling during the
(CPU-bounded) boot of Sculpt OS. As the RTC is not needed during bootup,
this patch reduces the boot time (on Qemu) by 2-4 seconds.
Fixes#4065
GDB monitor re-uses internal parts of the sandbox library. It thereby
relies on the internal detail of how local headers are included (using
"" instead of the now usual practice <>). A seemingly unrelated change
"init/sandbox: avoid repetitive state reports" eventually broke the
build of the GDB monitor.
This patch makes the GDB monitor less reliant on the way of how the
sandbox includes headers internally.
It also fixes a few warnings caused by the double definition of
__GENODE__ (adding an missing include guard and making the #define
conditional).
Related to issue #4064
The 'Timer::Session::trigger_periodic' RPC function used to accept 0 as
a way to de-schedule the periodic processing. Several components such as
nitpicker relied on this special case. In "timeout: rework timeout
framework", the value of zero was silently clamped to 1, which has the
opposite effect: triggering signals at the maximum rate. This results in
a visible effect in Sculpt where the leitzentrale-nitpicker instance
produces a constant load of 2% CPU time.
This patch restores the original timer semantics by
- Documenting it in timer_session.h,
- Handling the case explicitly in the timer implementation, and
- Replacing the silent clamping of the unexpected value 0 passed
to the timeout framework by a diagnostic error message.
Issue #3884
This patch restores the ability to launch nitpicker within a gui_fb
window. It is a follow-up fix for "nitpicker: make framebuffer and input
optional".
Issue #3812
This patch enables sculpt to utilize the CPU reset mechanism via the
PS/2 controller as well as the information provided via the ACPI FADT
information. Whenever the /config/system file is changed to <system
state="reset"/>, both mechanisms are triggered.
Supporting both mechanisms is useful because the PS/2-based reset does
not work reliably on modern machines. The PS/2-based reset is useful in
the case when the FADT reset information refers to the PS/2 command
port. In this case, the platform driver is unable to access this port
because it is already handed out to the PS/2 driver. In this case, the
PS/2 driver kicks in.
Issue #2726
If 'system="yes"' is specified in the <config>, the platform driver now
monitors the content of the system ROM. Should the value become "reset",
a reset is triggered using information obtained from the ACPI driver.
Related to issue #2726
The change of the platform driver is needed to avoid a parsing error of
the ACPI ROM when encountering an unexpected <reset> node.
Thanks to Alexander Boettcher for the preventing the regression of #3829
and improving the adherence to the ACPI spec when parsing the reset type.
Related to issue #2726
This patch adds the handling neccessary for clients to upgrade the cap
quota of their GUI session. Until now, the upgrade mechanism supported
only RAM quota.
The limitation became visible once a client - in the particular case the
motif_decorator - attempted the cap upgrade of its GUI session. The cap
quota would arrive at the wm, but the wm would keep it instead of
forwarding the quota to nitpicker. This resulted in an infinite retry
loop at the motif_decorator, ultimatedly depleting all its cap quota.
The window manager infers the overall state from the intercepted input
events for the decorator and all GUI clients. However, each of those
parties have an independent input-event stream. Whereas the order of
events within one GUI session is strict, the order of events between GUI
sessions is arbitrary. The window manager wrongly relied on a global
event ordering to track the pointed-at GUI session.
The patch removes the assumption of a global event order by tracking the
relevant pointer state for each GUI session independently and evaluating
these states when propagating the pointer position to the decorator.
Fixes#4059
This commit modified bash's builtin mapping of character sequences to
readline-functionality to detect the sequence of the delete symbol as
generated by the terminal.
Fixes#4058
The commits adds the same configuration values as supported up to now by
the monolithic usb driver. In contrast to the original, by default all drivers
are started. Disabling a controller type is used by Sculpt, e.g. for OHCI if
running Sculpt inside Virtualbox.
The addition of further keyboard layouts would otherwise pollute the
config/ directory too much.
Caution: When updating Sculpt OS, don't reuse your existing
config/event_filter file unmodified! You need to replace the chargen
includes, pointing to the new location, e.g.,
<include rom="en_us.chargen"/>
<include rom="special.chargen"/>
must be changed to
<include rom="keyboard/en_us"/>
<include rom="keyboard/special"/>
Issue #4055
This patch extends the settings dialog with the ability to select the
keyboard layout between the options that are included in the sculpt
image. The manual configuration is of course still possible by editing
the /config/event_filter directly.
If both the fonts configuration and the event-filter configuration are
managed manually, the settings button and window are not displayed.
Fixes#4055
By sorting the reported output, all consumers of the reports become able
to rely on a deterministic order. For example, the file browser of
Sculpt OS, the launcher menu items, and the depot-selection items will
appear in a predictable order.
Fixes#4054
This patch adds session-routing options to connect components to the
capture/event interfaces of the global nitpicker GUI server or the
leitzentrale GUI server. It thereby enables the implementation of screen
capturing components, remote management tools, or virtual keyboards.
Since those services are very powerful, they are subsumed under the
"hardware" category of the component graph as opposed to the GUI
category, which guarantees the separation of clients.
Fixes#4053
This patch adds 4 priority levels to the runtime subsystem. The highest
priority is used for components that are critical for the operation of
Sculpt, in particular the Leitzentrale GUI. All regularly deployed
components are assigned the lowest priority by default.
With priorities available in the runtime subsystem, this patch flattens
the priority levels at the top-level init to only two levels and
overlays the priority bands of the drivers, leitzentrale, and runtime
subsystems into one priority band. This has three benenfits:
- This change prevents the starvation of the Leitzentrale GUI from a
spinning high-priority driver (issue #3997).
- The change will also ease the hosting of latency-critical components
in the runtime subsystem that are prioritized higher than regular
components, the storage stack, and the network stack.
- The Leitzentrale GUI remains always perfectly responsive regardless
of the workloads deployed from packages. In the previous version,
the runtime graph was sometimes stuttering on high system load.
Issue #4045
This patch avoids the repeated warning "read blocked until lwIP
interface is ready" by printing the message only once. Otherwise,
the log is flooded with those warnings when falkon web browser
is started on Sculpt OS without network connectivity.
In case there is no valid configuration the component used to mute
output by default. This, however, might lead to the assumption that
audio is not working at all. Instead set the master output volume to
50% and the per application volume to 100%.
Fixes#4043.
This patch adds the missing destruction of session-state objects of
local services when closing a session. Because of the missing
destruction, those session-state object remained part of the server
ID space. This becomes a problem once the backing store of the session
state object vanishes, that is when the client child gets removed from
the sandbox. Hence, the removal of a child with an open session to a
local service would lead to the corruption of the server ID space.
This patch adds the missing session.destroy() call.
Fixes#4044
This patch fixes a corner case where a child is destructed while a
asynchronous close request to a sibling server is still pending.
The child immediately discarded the session ID as the end of the
close-session processing, assuming that this ID is never to be needed
again. The session-state continues to exist to handle asynchrous close
protocol with the server.
However, if the child is destructed at this point (before the server
responded to the session request), the destruction of the child would
not cover the discharging of the session state because the session state
was no longer be part of the client's ID space. So once the asynchronous
close response from the server came in, the session state contained
stale information, in particular a stale closed_callback pointer.
The patch fixes the problem by deferring the discarding of the client ID
to the point where the session state is actually destructed. So the
session of a pending close response is covered by the child destructor.
Thanks to Pirmin Duss for reporting this issue along with a test
scenario for reproducing it!
Fixes#4039
- Enable the "platform-level interrupt controller" PLIC on base-hw
- The RISC-V specification offers only a register description, but no
layout for the register set. This implies the layout is platform
dependent, and therefore, implemented separately for Qemu
issue #4042
This patch triggers the immediate removal of part_block once the
discovery of a fresh inserted USB stick has completed. Without the
patch, part_block was retained until the runtime was reconfigured the
next time for other reasons (e.g., toggling an inspect view). Until the
next reconfituration, part_block tended to stand in the way of directly
assigning the USB device to a VM.
This patch increases the RAM quota of the nitpicker instance for the
leitzentrale to make it suffice for the buffering of content during
resize operations. This fixes a flickering artifact when having an
inspect view open while entering a WLAN passphrase. When the connect
button appears or disappears (depending on the number of written
characters), some parts of the inspect terminal would flicker sometimes.
* catch every possible path of the Bit_allocator_dynamic::Out_of_indices
exception
* add unconditional log output in the new "catch" directives, so, we will be
able to debug the problem a bit more in detail next time
Fixes#4036
This way, the redirected env sessions for the CPU burner are no longer
called directly by init. Init stays independent from the behavior of the
CPU balancer.
Issue #3837
Issue #4029
This shim component can be used in case where env sessions of child
(i.e., child's PD session) must be routed to another child of init.
Without the shim, init would directly need to interact with these
sessions and would thereby make itself dependent of the server's
behavior. RPC calls to a server hosted as a child lead to all kinds of
problems such as livelock situations, and putting the robustness of init
at the whim of its child.
With the shim, init merely needs to bootstrap the shim component by
routing the shim's env sessions to core as usual. The server is only
used for the sessions for the actual application hosted atop the shim.
Issue #3837
Issue #4029
This patch is an interim fix for using HID devices that offer a HID
interface as not the first interface. It also supplements the
interface classes as supplemental information to the USB-devices
report.
Fixes#4035
With this patch, the board/<name>/arch property file can have multiple
lines where each line denotes an instruction-set architecture supported
for the board.
Issue #4019Fixes#4034
Simplify calculation of Timer::_duration, the old implementation caused
the time running backwards sometimes. This makes
'nic_router_dhcp_*' and 'event_filter' run scripts succeed.
issue #4021
This prevents the log terminal from adjusting itself to the whole screen
size before the leitzentrale window layout is applied. This intermediate
size can otherwise exhaust the 8 MiB of RAM quota of the log terminal.
Issue #3970
Do not link base and core libraries into on large relocatable .o file,
which is linked later to core - causing long link times. Create an
independent library archive out of the base and core libraries that can
be linked faster.
issue #4027
This commit improves the performance of the pipe plugin by using local
signal handling and avoiding sending a signal during write when pipe
buffer is full.
Issue #3583
* Add new virtio device model
* Extend test run-script with vfat block test image
* Add vmm depot src recipe
* Use packages in test run-script
Fix#4025
* Introduce different index types for ring counters and descriptor arrays
within the Virtio split queue implementation
* Be more accurate in reporting the queue number supported, and raise it
to 512
* Introduce abstractions for mmio register access, where several values
are stored at the same place, and selector registers exist.
* Turn Virtio_device into a template to define the Virio queue type,
and its numbers per device model (needed for e.g., future block model)
Issue #4025
All pipe-ends were notified at the same time which leads to dead-locks.
This commit mitigates this by having a signal handler for each pipe and
each pipe-end respectively.
Issue #3583
The vfs pipe plugin can now be used as named pipe which anables data
transfer via file handles from one component to another. E.g. if one
would like to send data from component A to stdin of a libc component B,
one can do so by simply writing to that fifo file.
Issue #3583
With this commit libcrypto does not use ARM NEON extension as long as
SPECS includes "neon". arm_v7a does declare "neon" per default while
arm_v8a does.
Issue #3773
Note, OpenSSL now comes as one combined depot archive *openssl* that
replaces the former *libssl* and *libcrypto* archives. The libraries are
still separate binaries for compatibility with legacy software.
Issue #3773
It seems that with the nigthly autopilot the data port (that is choosen by the
client) may stay some time (minutes) allocated after the a test run. This
causes successive tests to fail when trying to reuse the port.
* Use a unique data port for each target platform in the range of 18000-18099.
* Add documentation on how to prepare for running the test on a Linux target.
* Remove Qemu-specific code paths as Qemu isn't supported anymore by the script
since the introduction of the Uplink session (running with a NIC router on
Qemu was never supported and now we always need a NIC router).
Ref #3961
This patch simplifies the packaging of the base-hw kernel for a given
board, in particular when the board support is hosted as an external
repository such as genode-world. Regardless of where the board-support
is hosted, the content.mk file becomes as simple as:
include $(GENODE_DIR)/repos/base-hw/recipes/src/base-hw_content.inc
The board name is automatically inferred from the path of the src
recipe. The architecture is determined from board/<name>/arch files,
following the pattern of the image_link_address. The attempt to build a
base-hw-<board> binary archive for the wrong architecture is now
gracefully handled by skipping all targets (using the REQUIRES
mechanism).
Besides the improved convenience, the patch results in depot archives
that are much closer tailored to the actual board by omitting files for
architectures that are not used by the board. E.g., the src/base-hw-pc
archive does not contain any ARM-related content.
The patch also restores the package builds for core/bootstrap object
files as a follow-up fix of "base: remove SPEC variables of boards",
which happened to left 'BOARD' undefined in the src archives.
Fixes#4019
Be more in line with the original host implementation in Qemu and
buffer transfers. Having transfers in-flight helps to smoothen playback
in case other components utilize the CPU.
Issue #4018.
Linux as well as Windows guests want queue to a varying number of
transfers, where each transfer only covers one transaction (iso frame).
The best results were obtained by following that behaviour rather
than queuing multiple iso frames per requests (like is done with OUT
transfers).
The number of requests queued is increased to 32 while the number of
packets per reques is decreased to 1.
Issue #4018.
The contrib code is updated from 2.4.1 to version 5.2.0 and the used
device-model is changed to QEMU xHCI. Due to this change older guests
OSes, namely Windows 7, that relied on the NEC xHCI device-model will
not work anymore.
The 'Qemu::Controller' interface was extended by an 'info' method, which
returns the vendor and product ID. This allows for removing the
hard-coded values in the VirtualBox glue code.
Issue #4018.
* Update the 'packet_size' information with the actual length for
each isoc frame to be able to handle short reads at the client side.
* Copy the whole transfer buffer because the host controller stores
the data at the original offsets, i.e., the buffer is not densely
packed.
Fixes#4018.
The former implemention assumed that the guest physical memory is
mapped continously. This, however, is not true. Writing larger
files to an USB stick with a Windows 10 guest would therefore lead
to data corruption.
The current implementation uses a bounce buffer to copy the data
to and from the guest physical memory and leaves dealing with the
memory mappings entirely up to the VMM.
Fixes#4017.
When the usb_net_drv was introduced in ports/run/netperf.inc, the
netperf_lxip_usb test on x86_64/hw/pc triggered the calling of the
netif_stop_queue dummy at
contrib/<DDE_LINUX>/src/drivers/usb_net/drivers/net/usb/usbnet.c:1464. As
netif_start_queue was also a dummy and allowed to be called, we tried allowing
calls to the netif_stop_queue dummy as well which fixed the
netperf_lxip_usb test on x86_64/hw/pc.
Ref #3961
The 'environ' pointer is a global variable that must be considered as
part of the application state. It must be copied from the parent to the
child process during fork. Otherwise, a child returning from fork is
unable to access environment variables before invoking execve. The
actual environment variables and their values are already captured
because they reside at the application heap, which is cloned from the
parent. So the copied 'environ' pointer refers to valid data.
Fixes#4015
- remove Spike/BBL support in favour of Qemu (>=4.2.1)
- add 'riscv_qemu' board, remove 'spike' board'
- update to privileged ISA v1.10 (from v1.9.1)
- use direct system calls for privileged core threads (they call into
the kernel and don't use mode changing system calls, i.e. 'ecall',
semantics)
- use 'OpenSBI' semtantics for SBI calls (to machine mode) instead of
BBL
issue #4012
By first removing unused ranges, implicitly meta data allocations are freed
up. This leads to more unused slab blocks and freed up meta data allocations
in the avl tree.
Issue #4014
The deadlock reported in #3236 could be reproduced via the wm.run script
and the modification of test/nitpicker in commit "nitpicker: fix destroy
with invalid handle" by clicking on the testnit entry of the launchpad.
This patch fixes the deadlock by releasing the locked pointer early in
the destruction path, which is legitimate as the wm is single-threaded.
Fixes#3236
This patch adds the missing invalidation of the _hovered pointer to
User_state::forget, which is required to cover the situation where the
owner of the hovered view vanishes.
Fixes#4011
