When using the newer genode_c_api uplink library, an uplink connection uses
the device name as label, which enables integrators to use different policies
resp. routes for different devices driven by one driver. The nic_drv policy
of the nic_roouter configuration generated by the sculpt_manager however uses
an empty label like: "nic_drv -> ". This is the way how existent NIC drivers,
like ipxe_nic_drv requested their uplink session. To support both driver
variants this commit relaxes the policy by checking for a prefix only.
Ref genodelabs/genode#4660
If `select_from_ports` is evaluated lazily, we might miss a port during
the dependency check. A way to prevent this is to use the `:=` operator.
Fixesgenodelabs/genode#4618
plain_decorator_theme.tar is not linked to the app but must be generated
as side effect. Therefore, use CUSTOM_TARGET_DEPS to trigger the
generation.
Fixes#4637
This patch removes the intermediate querying of the depot while the
installation of packages is in progress. This avoids misleading warning
messages and reduces superfluous file-system load during the
installation of large packages.
Issue #4631
This patch reflects both the pci_decode results and the platform
driver's aggregated device information in Sculpt's /report/drivers/ in
the form of pci_devices and devices files respectively.
Until now, the /config/system ROM was not handled by the sculpt manager
but solely managed by the user. Its main purpose was the ability to
reset or power-down the machine by manually modifying the 'state'
attribute. However, down the road, we'd like to enable the sculpt
manager to drive this state, e.g., to implement the multi-staged
loading of drivers, or to drive suspend-resume states.
The support such scenarios, the 'system' state has been moved from
/config/system to /config/managed/system.
This is a follow-up commit for "menu_view: configurable alpha channel
and bg color", which simplifies the code. The '_no_alpha' surface is not
needed because the 'Gui_buffer' provides a 0x0 alpha surface when using
the opaque mode.
This patch changes the access of pkg-archives files such that the file
read only once per pkg, not for each ROM module used by the package.
Issue #4611
By caching directory listings, the performance of depot_query is no
longer impeded by a massive amount of stat calls while searching for ROM
module locations.
Issue #4611
Upon closer inspection of real-world access patterns, it turns out that
the 'Stat_cache' and 'Cached_rom_query' are not as effective as hoped
for because cache hits are rare while querying pkg blueprints.
However, by increasing the initial size of the blueprint reporter from 4
KiB (default) to 64 KiB has a great effect. With the small default
report size, the querying of blueprints is repeated until the buffer
size suffices, incrementing the buffer size by 4 KiB in each iteration.
Issue #4611
The new 'Dictionary' provides an easy way to access objects using
strings as key. The 'String' received the 'operator >' to simplify the
organization of strings in an AVL tree.
The patch removes the former definition of the 'operator >' from the
platform driver because it would be ambigious now.
Fixes#4610
This patch avoids repetitive depot queries at the start of the Sculpt
system.
We don't need to trigger a query unconditionally whenever the
managed/deploy changes because the call of 'handle_deploy' triggers a
query when needed.
We don't need to trigger a query once the prepare step is completed
because the depot_query component is spawned at this point. The initial
blueprint produced by the depot_query component, in turn, triggers the
'handle_deploy' mechanics in the sculpt manager.
The constructor of the Sculpt manager's 'Main' does not need to call
'depot_deploy' because the prepare step - which is a precondition for
the deployment - cannot be completed at this point anyway.
This patch splits the former DEPOT=omit option into two variants.
The new 'list' option behaves like the former 'omit' option, skipping
the creation of the tar archive from the depot content referenced by the
deploy configuration but showing a list of depot archives that need to
be published for the deployment.
When specifying 'omit' in th new version, the local depot is not queried
for the packages referenced in the deploy configuration. So the
deployment can refer to packaged hosted only remotely.
Fixes#4605
If provided with a config that does not include a `<static>` or
`<common_routes>` node, depot_deploy exits due to a `Nonexistent_sub_node`
exception. Instead, we should output a more useful warning.
Fixesgenodelabs/genode#4600
The `with_sub_node` method is renamed to `with_optional_sub_node` to
better reflect that the non-existence of a sub node with the desired type is
ignored.
At the same time, the new `with_sub_node` now takes a second functor that is
called when no sub node of the desired type exists.
genodelabs/genode#4600
The 'file' library makes the gems API depend on the libc, which is not
desireable because most users of the gems API have no direct libc
dependency.
With the changes of issue #4599, the build of each src archive that
depends on the gems API would attempt to build the 'file' library and
thereby demand the libc.
Note that the 'file' library is a relic that should better not be
promoted as part of the gems API. Hence, this patch removes the file
library from the gems API and adds it to the src archives of the few
remaining users.
Issue #4599
This style is used by the upcoming phone version of Sculpt for GUI
elements that are supposed to stand out a little bit more than the
regular frame style.
This patch enhances menu_view with the optional configuration attributes
'opaque' and 'background'. Setting 'opaque' to "yes" suppresses the use
of the alpha channel at the GUI session. This improves the drawing
performance by 20% on the PinePhone. Since the menu_view uses the
gems/gui_buffer.h utility, the 'Gui_buffer' received a new 'Alpha'
argument at construction time.
The 'background' attribute can be specified to define the reset color of
the GUI buffer. It alleviates the need to create a frame widget for the
top level.
The patch also switches the optimization level for compiling menu_view
to -O3, which increases the drawing performance on the PinePhone by 30%.
Fixes#4592
This change increases the quota to allow the use of bigger fonts, and
tweaks the style such that the keyboard gets a decent appearance on the
PinePhone's 1440x720 display.
This patch adds principle support for using a USB-net modem as
mobile-data uplink. The change is motivated by the upcoming phone
manager for the PinePhone where the modem serves as the primary network
uplink. For the regular PC version of Sculpt, the feature is not needed
(hence remains disabled) because USB net can be deployed from a package
as described in:
https://genodians.org/jschlatow/2021-07-21-mobile-network
The patch also renames the "Local" network option to "Disconnected" to
be more intuitive.
By decoupling the network dialog's menu view from the 'Network' class,
we become able to host the network dialog in the same menu view instance
as other dialogs.
This patch allows the sculpt manager hosted in the leitzentrale
subsystem to observe the toggling between the runtime and the
administrative GUI. This enables alternatives to the use of the
gui_fader for switching between both views. In particular, the
upcoming phone_manager toggles the visibility of its own GUI
depending on the leitzentrale state.
In a Sculpt system based on the upcoming phone_manager, the event filter
obtains its static configuration from /config/managed/event_filter.
Without the requirement for changes at runtime, there is no need to
have the phone_manager in the loop after all.
Without this patch however, this file was always initialized with the
template gems/sculpt/event_filter/default, which was presumably used
only at boot time until the sculpt manager has produced the first
generated event-filter configuration.
This patch applies the choice of optional configs - i.e., a custom
event_filter config - to both the config/ and the initial content of
config/managed/. So in cases where the /config/managed/event_filter
remains entirely static, the latter properly reflects the choosen
variant.
By using the new functions provided by the base API, this patch removes
the dependency of several components from include/decorator/xml_utils.h.
Issue #4584
This patch allows the leitzentrale subsystem to control an audio driver
hosted in the drivers subsystem. An example use case is the toggling of
the speaker during phone calls.
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
Define custom analyses that can be imported into TraceCompass (>= 7.3)
for evaluating the traced component interactions and checkpoints.
genodelabs/genode#4352
The box layout evenly distributes the child widgets according to the
number of children. This is not desired in the special case where a
child widget has a size of zero. The patch changes the layout algorithm
such that zero-sized widgets are not taken into account for distributing
residual space.
This patch replaces the former implicit "phonyness" of the rule by an
explicit .PHONY and installs a symlink from the target's build directory
to bin/ as is the usual practice for regular targets.
Related to issue #3972
To not integrate referenced depot packages when building a sculpt image,
just set the environment variable DEPOT= to be empty. This allows to produce
slim images to the price that you have to publish the packages yourself.
In that case the sculpt run-script reminds you, and prints the package
versions.
Fixgenodelabs/genode#4530
By declaring the generated menu_view_styles.tar archive as build
artifact, it is automatically picked up whenever menu_view appears as
build ingredient of sculpt.
build: app/menu_view
This patch simplifies the use of the menu_view in scenarios where no
absolute motion events but only touch events occur. Previously, such
scenarios required the creation of artificial absolute motion events
via the event filter.
Issue #4514
This patch fixes rare freezes of menu view instances, which could happen boot
time whenever the leitzentale GUI happens to get initialized before the display
driver finished setting up a reasonable mode. In this case, the resolution-
dependent font size can temporarily get almost zero, tripping up the glyph
renderer.
2560x1440 resolutions require more RAM resources. Additionally, make
sure that the decorator 'init' receives enough CAPs to service the
decorator configuration.
fixes#4485
This patch reduces the response time of supposedly stuck situations like
an unresponsive part_block component. First, it reduces the heartbeat
rate from 1 to 2 seconds to make it consistent with the frequency of
state reports. Second, it allows up to four skipped heartbeats until
regarding the situation as stuck. With those changes, the prolonged
initialization sequence of a USB ZIP drive succeeds with Sculpt.
This patch handles the corner case of switching virtual desktops while
child views are visible. Examples of such child views are tool tips,
pull-down menus, or the graph of the top-view utility. The switch to
another virtual desktop would implicitely turn the child views into
top-level views of the root nitpicker GUI server until switching back
to the original virtual desktop.
The patch implements the expected behavior of hiding all child views
that belong to a disappearing top-level view.
The quota adjustments prevent the leitzentrale's decorator from running
out of RAM, and allow the nitpicker GUI server to preserve buffer
content during resize (reducing flickering artifacts) when using a
screen resolution up to 2560x1440.
This patch adds the trace-logger utility to the default set of packages
along with an optional launcher. With this change, only two steps are
needed to use Genode's tracing mechanism with Sculpt:
- Add 'trace_logger' to the 'launcher:' list of the .sculpt file
- Either manually select the 'trace_logger' from the '+' menu,
or add the following entry to the deploy configuration:
<start name="trace_logger"/>
By default, the trace logger is configured to trace all threads
executed in the runtime subsystem and to print a report every 10
seconds. This default policy can be refined in the launcher's <config>
node. Note that the trace logger does not respond to configuration
changes during runtime. Changes come into effect not before restarting
the component.
Issue #4448
The value of 50% as assigned by commit "sculpt: add basic support for
i.MX8 Quad EVK" leaves too little room for other components of the
runtime subsystem. With the adjustements of commit "sculpt: assign CPU
quotas" the sum exeedcs 100%. Hence this commit tunes down the value to
sensible 10%.
By assigning CPU budgets, base-hw's priorities come into effect.
Even though the chosen values are rather guessed than informed, they
yield a visibly improved responsiveness on the Pinephone.
* Switch from the legacy usb_host driver to the new PC version
in recipes and automated tests
* Update documentation snippets
* Remove outdated, unused usb_rndis run-script
Fixgenodelabs/genode#4416
Do not set '_mode' per default to MANANGED. Check if a manual config ROM
is present during construction and set '_mode' to MANUAL in case it is.
issue #4369
Switch the code to 0 lengh array instead. The code in
Lru_cache::element_size calls sizeof on this structure. This works in
gcc, but fails when using clang. Even for GCC however the documentation
states:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."
Basically its an implementation quirk that clang does not support. Both
GCC and clang do support zero sized arrays however so using them here
allows both compilers to process this code.
Ref: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Issue #4421
* Creates sessions to all supported services of the black hole component
* Test-drives the Event and Capture session with dummy input
* Adds the test to the default list of depot_autopilot.run
* Test-driving the Audio_in and Audio_out sessions is still missing and should
be added via a dedicated commit
Ref #4419
To make room for the re-newed usb_host_drv basing on Linux 5.14 and
the re-newed lx_kit/lx_emul we have to move the depot recipe and
consistently name the old drivers with a legacy_ prefix.
Ref genodelabs/genode#4416
The functionality of the test-block-client, test-block-server, and
test-block-bench components is now covered by the block_tester
application and the vfs_block server.
Issue #4405
This patch makes Sculpt's leitzentrale GUI able to respond to touch events. It
formerly assumed that click/clack events are always preceded by hover reports
that identify the clicked-on widgets. For touch events, however, the most
up-to-date hover information referred to the previous click because there is no
motion without touching. So the GUI tended to identify the wrong widgets as
click targets.
The patch solved this problem by testing the freshness of the hover information
at the time of the click. If the hover information is older than the click, the
action is deferred until up-to-date hover information becomes available.
Fixes#4398
* retrieve Genode::Env from plugin, this way no mesa applications need to
be changed.
* add 'vfs_gpu' api
* remove when all required functionality is implemented within the plugin.
issue #4380
When a <gpu> node is present in the VFS, the plugin opens a
Gpu::Connection for each open call to the 'gpu' node and installs a
completion signal handler. A read only to the fd returned only comes
back if a completion signal has been received between two read
transctions to the fd.
For now the Gpu::Connections can be retrieved by calling the
'vfs_gpu_connection(unsigned long id)' function. The id can be obtained
using 'stat' on the 'gpu' device and is located in the inode (st_ino)
field of the stat buffer.
issue #4380
This patch equips Sculpt with the ability to customize the system image
in very flexible ways.
All customizable aspects of the image have been relocated from the
former sculpt.run script and the accompanied gems/run/sculpt/ directory
to a new location - the sculpt/ directory - which can exist in any
repository. The directory at repos/gems/sculpt/ serves as reference.
The sculpt directory can host any number of <name>-<board>.sculpt files,
each containing a list of ingredients to be incorporated into the
Sculpt system image. The <name> can be specified to the sculpt.run
script. E.g., the following command refers to the 'default-pc.sculpt'
file:
make run/sculpt KERNEL=nova BOARD=pc SCULPT=default
If no 'SCULPT' argument is supplied, the value 'default' is used.
A .sculpt file refers to a selection of files found at various
subdirectries named after their respective purpose. In particular, There
exists a subdirectory for each file in Sculpt's config fs, like
nitpicker, drivers... The .sculpt file selects the alternative to use
by a simple tag-value notation.
drivers: pc
The supported tags are as follows.
*Optional* selection of /config files. If not specified, those files are
omitted, which prompts Sculpt to manage those configurations
automatically or via the Leitzentrale GUI:
fonts
nic_router
event_filter
wifi
runtime
gpu_drv
Selection of mandatory /config files. If not specified, the respective
'default' alternative will be used.
nitpicker
deploy
fb_drv
clipboard
drivers
numlock_remap
leitzentrale
usb
system
ram_fs
Furthermore, the .sculpt file supports the optional selection of
supplemental content such as a set of launchers.
launches: nano3d system_shell
Another type of content are the set of blessed pubkey/download files
used for installing and verifying software on target.
With the new version, it has become possible to supply a depot with the
the system image. The depot content is assembled according to the 'pkg'
attributes found in launcher files and the selected deploy config.
The resulting depot is incorporated into the system image as 'depot.tar'
archive. It can be supplied to the Sculpt system by mounting it into the
ram fs as done by the 'ram_fs/depot' configuration for the ram fs.
It is possible to add additional boot modules to the system image. There
are two options.
build: <list of targets>
This tag prompts the sculpt.run script to build the specified targets
directly using the Genode build system and add the created artifacts
into the system image as boot modules.
import: <list of depot src or pkg archives>
This tag instructs Sculpt to supply the specifid depot-archive content
as boot modules to the system image. This change eliminates the need for
board-specific pkg/sculpt-<board> archives. The board-specific
specializations can now be placed directly into the respective .sculpt
files by using 'import:'.
To make the use of Sculpt as testbed during development more convenient,
the log output of the drivers, leitzentrale, and runtime subsystems
can be redirected to core using the optional 'LOG=core' argument, e.g.,
make run/sculpt KERNEL=linux BOARD=linux LOG=core
The former pkg/sculpt-installation and pkg/sculpt-installation-pc
archives have been replaced by pkg/sculpt_distribution-pc, which
references the generic pkg/sculpt_distribution archive. Those pkgs are
solely used for publishing / distribution purposes.
Fixes#4369
- Consider 'sdl' as source of input events in the event-filter
configuration as generated by the sculpt manager
- Supply an artificial 'platform_info' ROM as requested by the
sculpt manager to obtain the affinity-space information
- Substitute 'fs_rom' for 'cached_fs_rom' as a workaround for the
lack of support for managed dataspaces on Linux
Fixes#4362
This change keeps the version-controlled 'pubkey' and 'download' files
separate from files generated via depot/create or downloaded via
depot/download. So one can remove the entire depot/ directory without
interfering with git.
Furthermore, depot keys can now be hosted in supplemental repositories
independent from Genode's main repository.
Fixes#4364
This patch improves the robustness of the CPU-affinity handling.
- The types in base/affinity.h received the accessors
'Location::within(space)' and 'Affinity::valid', which alleviates
the fiddling with coordinates when sanity checking the values,
in init or core.
- The 'Affinity::Location::valid' method got removed because its
meaning was too vague. For sanity checks of affinity configurations,
the new 'within' method is approriate. In cases where only the x,y
values are used for selecting a physical CPU (during thread creation),
the validity check (width*height > 0) was not meaningful anyway.
- The 'Affinity::Location::from_xml' requires a 'Affinity::Space'
as argument because a location always relates to the bounds of
a specific space. This function now implements the selection of
whole rows or columns, which has previously a feature of the
sandbox library only.
- Whenever the sandbox library (init) encounters an invalid affinity
configuration, it prints a warning message as a diagnostic aid.
- A new 'Affinity::unrestricted' function constructs an affinity that
covers the whole affinity space. The named functions clarifies
the meaning over the previous use of the default constructor.
- Core's CPU service denies session requests with an invalid
affinity parameter. Previously, it would fall back to an
unrestricted affinity.
Issue #4300
Similar to other devices allow for selecting a graphics device as
well. This is currently only useful on iMX8-based systems like
iMX8Q-EVK and MNT Reform2 where the driver is explicitly started
from a pkg.
Fixes#4342.
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
First, the former implementation has only considered the pure numerical
variant of the -m argument. Yet, qemu also allows specifying the amount
of memory by `-m 1G`, `-m size=1G` and more.
Second, the default amount of memory for BOARD=pc was 512M (800M in case of okl4).
Since the depot_autopilot.run also required at least 768M on all
platforms it seems reasonable to take 800M as a default value for BOARD=pc and
thereby remove the special treatment of okl4.
genodelabs/genode#4311
This patch adds a missing call of '_handle_decorator_margins' at
construction time. Up to commit "report_rom: versioning and explicit
notification" this problem was masked by an unconditional signal, which
implicitely triggered the call.
Issue #4274Fixes#4306
- CPU-architecture annotations
- Change order of top-level menu, moving Mesa driver to the end
- Add black_hole, recall_fs, file_fault
- Add usb_webcam, test-capture
- Add audio driver and mixer
- Add vbox6, keeping vbox5-nova-sculpt as fallback
- Remove recall_fs launcher, which is obsolete with the recall_fs pkg
- Replace system_clock by system_clock-pc pkg
Issue #4281
This follow-up commit to "sculpt: avoid flickering of leitzentrale"
allows nitpicker to double-buffer pixels during resize operation on a
screen size of 1920x1200.
This patch presents all press and release events to the pointer state,
fixing the problem that _key_cnt was decreased but never increased.
However, the inconsistency had no observable effects in practice.
Issue #4176
This patch ensures that the pointer report is updated not before all
input events are handled. The change does not solve any observed
practical issue but the potential problem was spotted while reviewing
the code.
Issue #4176
This patch changes the depot_query tool to filter the returned index
data depending on the 'arch' as specified for the query. This way, one
index file can support multiple CPU architectures while allowing
individual entries to be architecture-specific.
Fixes#4295
This patch adds the missing definition of 'prio_levels' in the prepare
sub init, fixing the warning:
[init -> runtime -> prepare] Warning: vfs: invalid priority, upgrading from -2 to 0
Issue #4281
Warning!
The current version of the file vault is not thought for productive use but
for mere demonstrational purpose! Please refrain from storing sensitive data
with it!
The File Vault component implements a graphical frontend for setting up and
controlling encrypted virtual file systems using the Consistent Block Encrypter
(CBE) for encryption and snapshot management. For more details see
'repos/gems/src/app/file_vault/README'.
Fixes#4032
Previously unconditional calls to Genode::log in cbe init and the cbe trust
anchor VFS plugin were made dependent on a verbosity flag that is set to
"false" by default.
Ref #4032
Instead of simply encrypting the private key with AES-256 when storing it to
the 'encrypted_private_key' file, wrap it using the AES-key-wrap algorithm
described in RFC 3394 "Advanced Encryption Standard (AES) Key Wrap Algorithm".
This is more secure and enables us to directly check whether the passphrase
entered by the user was correct or not.
Ref #4032
As the file formerly named 'secured_superblock' actually contains the hash of
the superblock that was secured, it was renamed 'superblock_hash'.
Ref #4032
As the file formerly named 'keyfile' actually contains the encrypted private
key of the Trust Anchor, it was renamed 'encrypted_private_key'.
Ref #4032
By now, the symmetric keys were only XOR'ed with the private key as placeholder
for a real encryption. Now they are encrypted using AES256 with the TA's
private key as key
Ref #4032.
A private key of 256 bits is generated pseudo-randomly using the jitterentropy
VFS plugin on initialization. The private key is stored in the key file
encrypted via AES256 using the SHA256 hash of the users passphrase. When
unlocking the CBE device, the encrypted private key is read from the key file
and decrypted with the hash of the users passphrase.
Ref #4032
Instead of using the user passphrase directly, use its SHA256 hash calculated
using libcrypto. The passphrase hash is still stored in the key file to be
used as base for the very primitive way of generating the private key.
Ref #4032
Closing the keyfile handle after a write operation wasn't synchronised to the
actual end of the write operation.
Issuing a write operation at the back end returns successfull as soon as the
back end has acknowledged that it will execute the operation. However, the
actual writing of the data might still be in progress at this point. But the
plugin used to close the file handle and declare the operation finished at this
point which led to warnings about acks on unknown file handles and leaking
resources. Now, the plugin issues a sync operation directly after the write
operation and waits for the sync to complete. This ensures that the plugin
doesn't declare the operation finished too early.
Ref #4032
The unlocking operation in the trust anchor was broken wich caused bad keys in
the CBE. This rewrites the whole operation to work as desired. Note that this
doesn't make it more safe! The private key is still almost the same as the
passphrase and stored plaintext.
Ref #4032
The plugin used to close file handles via the 'vfs_env.root_dir.close'.
However, this lead to resource leaks and apparently isn't the right way to
do it. Other VFS plugins do it by calling 'close' directly on the handle and
doing it in the trust anchor plugin also, fixes the leaks.
Ref #4032
Closing the hashfile handle after a write operation wasn't synchronised to the
actual end of the write operation.
Issuing a write operation at the back end returns successfull as soon as the
back end has acknowledged that it will execute the operation. However, the
actual writing of the data might still be in progress at this point. But the
plugin used to close the file handle and declare the operation finished at this
point which led to warnings about acks on unknown file handles and leaking
resources. Now, the plugin issues a sync operation directly after the write
operation and waits for the sync to complete. This ensures that the plugin
doesn't declare the operation finished too early.
Ref #4032
There were no means for issuing a Deinitialize request at the CBE using the
CBE VFS plugin. The new control/deinitialize file fixes this. When writing
"true" to the file, a Deinitialize request is submitted at the CBE. When
reading the file, the state of the operation is returned as a string of the
format "[current_state] last-result: [last_result]" where [current_state] can
be "idle" or "in-progress" and [last_result] can be "none", "success", or
"failed".
Ref #4032
When discarding a snapshot, the CBE VFS plugin didn't communicate the ID of
the snapshot to the CBE. Instead it set the ID argument to 0. Therefore the
operation never had any effect.
Ref #4032
The snapshots file system used to return the number of snapshots on
'num_dirent' when called for the root directory although it was expected to
return 1. This confused the tooling ontop of the VFS.
Ref #4032
Despite being readable, the files control/extend and control/rekey proclaimed
that they were not when asked. This caused the fs_query tool to not report the
content of the files although it could have.
Ref #4032
Stat calls on the control/extend and control/rekey files returned a bogus file
size that led to an error in the VFS File_content tool. The tool complained
that the size of the file determined while reading the content differs from the
one reported by the stat operation. Now, the stat call will always determine
the actual size of what would be read. However, it isn't guaranteed that this
size doesn't change in the time after the stat operation and before the read
operation.
Ref #4032
Both, trace_logger and vfs_trace had their own trace_buffer.h. This
commit consolidates the existing implementations and provides the
resulting trace_buffer.h at 'include/trace/'. It thereby becomes part of
the trace api archive.
genodelabs/genode#4244
WARNING: BREAKS CONFIG COMPATIBILITY!
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
How to adjust:
At each occurrence of the 'dns_server_from' attribute in a NIC router
configuration replace the attribute name with 'dns_config_from'. The attribute
value remains unaltered.
DETAILED DESCRIPTION
The new attribute name 'dns_config_from' reflects that also other aspects of
the DNS configuration of the denominated domain are used by the DHCP server
that holds the attribute. This commit is a preparation for forwarding also the
domain name (DHCP option 15) with the mechanism behind the attribute.
Ref #4246
File size must be the same as the number of bytes that can be read from
the file. Otherwise, this will trigger a `Truncated_during_read`
exception.
Fixesgenodelabs/genode#4240
* the GPU multiplexer now offers the platform service to the Intel
framebuffer driver (driver_manager)
* ajdusted drivers_managed-pc to hand out resources to the GPU driver
* adjust quotas
issue #4233
Adapts Dir_file_system::open_composite_dirs in a way that it returns "success"
when the leaf node of the path is an empty directory but "lookup failed", as
usual, if one of the other directories on the way to the leaf node is empty.
I couldn't find a technical reason why we used to return "lookup failed" when
only the leaf node was empty.
The commit also adds a test for en empty root directory and empty
sub-directories to the fs_query run script.
Fixes#4198
The fs_query component used to exit with an uncaught exception if a queried
directory didn't exist. Now, fs_query will catch this event and simply skip the
affected query, thereby indicating to the user the inexistence of the
queried directory.
Ref #4032
If no window has ever been focused, next() always returns an invalid
window id. As a consequence, there is no way to cycle through the focus
history without an explicit focus event (e.g. mouse hover).
Instead, next() should return the first window from the focus history if the
currently focused window is not present.
Fixesgenodelabs/genode#4164
Adds the <new-file> operation to the fs_tool. When configured, the
<new-file path="...">...</new-file> tag will cause creation or overwriting of
the file given through the 'path' attribute. The file will contain the text
content of the tag.
Ref #4032
This patch moves the utility from the app/text_area to os/vfs.h to make
it easier to use by other components. By hosting the 'New_file' as a
friend alongside the 'Directory', we can now pass a 'Directory' as
constructor argument, which is consistent with other utilities such as
'File_content'.
As a further improvement, the new version supports the implicit creation
of the directory hierarchy leading to the new file.
Issue #4032
By adding an attribute 'size="yes"' to a query, one instructs fs_query to
report also the size of each queried file as attribute 'size' of the
corresponding 'file' node.
Ref #4032
The fs_query component used to try watching all files it found resulting in
errors on files that are not watchable. For some files, however, the watch-
feature doesn't make sense as they are not readable (no content, no size).
Now, fs_query will check first whether a file is readable and skip watching
if it isn't.
Ref #4032
When configuring fs_query to print the content of files it used to try so for
all files it found resulting in errors on files that are not readable. Now,
fs_query will check first whether a file is readable and skip printing the
content of those that are not.
Ref #4032
Managing ssh event file descriptors was performed from two different
threads which could cause reallocation of structure used in other thread
in a call to 'poll' function.
Splitted initialization to parts and moved ssh event part into ssh loop.
Issue #4095
Moved creating ssh loop thread after initialization of wake up server
file descriptors to make sure that they will be properly handled even in
first loop run.
Issue #4095
The default size is on most kernels 512M. On OKL4 we have to use 800M,
because of the statically configured memory ranges in the OKL4 kernel.
By avoiding a specific amount of memory, the default Qemu memory sizes are
used.
Issue #4095
This patch fixes a GCC-10 compile error. Even though the optimization
was quite effective - I measured a speedup of factor 2 - it is not all
that important for the overall application performance. In the nano3d
case, we are talking about 1 vs. 2 percent of CPU time.
Fixes#4140
pthread.0 acquires a write buffer mutex and calls potentially
blocking fs operations. The EP thread handles session requests and tries to
acquire the same write buffer lock. IO progress events for pthread.0 are
handled by the EP thread, which however is blocking on the write buffer mutex.
The commit uses two write buffers, one which is filled by the EP and a second
which is used by pthread.0. The two buffers are swapped protected by a mutex
without invoking blocking fs operations.
Issue #4095
The exec_terminal generates a config report which is used as input ROM for
sandbox/init, which does not support an "<empty>" node.
An empty config node is empty, without an node.
Issue #4095
Was still using the event_filter.config from drivers_interactive-pc
although a dedicated file is present in the raw archive.
The fix is just for consistency reasons, as sculpt manager is generating the
event_filter.config anyway.
This patch increases the RAM quota of the top-level nitpicker instance
to 12 MiB so that resize operations can be buffered for resolutions up
to 2560x1080. It mutes diagnostic messages of the form "Warning: Gui
(...) not enough RAM to preserve buffer content during resize" and
improves the window-resize experience.
With this patch, the user is able to re-gain access to the inspect view
by toggling the inspect button of a file system unrelated to the failed
USB storage device.
Fixes#4090
The direct execution of application-level code by a watch handler is
troublesome because those handlers are executed at the I/O signal level.
In the concrete case, the watch handler got recursively called because
the handler called _handle_config (application-code), which called the
VFS, which in turn performed a wait_and_dispatch_one_io_signal, which
again invoked the watch handler.
The patch works around the problem by letting the watch notification
trigger the application-level signal for the _config_handler.
Fixes#4091
* The device XML information dataspace is only provided,
when the client's policy states `info="yes"`
* The device XM information gets changed to include the
physical resource names (I/O memory and IRQ addresses)
instead of virtual ids and page offset
Fix#4077
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of
- Platform::Device - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq - interface for receiving device interrupts
The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.
Fixes#4075
This patch adjusts the matching of the IP address such that the external
IP address is used as opposed the the NAT-local address. It is follow-up
fix of the conversion to the uplink session interface.
Issue #3961
Apparently the skewed motion timings came from the issue fixed by
"timer: restore semantics of periodic timeout 0". With the current
version of the timer, the original motion parameters work just fine.
This patch restores the ability to launch nitpicker within a gui_fb
window. It is a follow-up fix for "nitpicker: make framebuffer and input
optional".
Issue #3812
This patch enables sculpt to utilize the CPU reset mechanism via the
PS/2 controller as well as the information provided via the ACPI FADT
information. Whenever the /config/system file is changed to <system
state="reset"/>, both mechanisms are triggered.
Supporting both mechanisms is useful because the PS/2-based reset does
not work reliably on modern machines. The PS/2-based reset is useful in
the case when the FADT reset information refers to the PS/2 command
port. In this case, the platform driver is unable to access this port
because it is already handed out to the PS/2 driver. In this case, the
PS/2 driver kicks in.
Issue #2726
This patch adds the handling neccessary for clients to upgrade the cap
quota of their GUI session. Until now, the upgrade mechanism supported
only RAM quota.
The limitation became visible once a client - in the particular case the
motif_decorator - attempted the cap upgrade of its GUI session. The cap
quota would arrive at the wm, but the wm would keep it instead of
forwarding the quota to nitpicker. This resulted in an infinite retry
loop at the motif_decorator, ultimatedly depleting all its cap quota.
The window manager infers the overall state from the intercepted input
events for the decorator and all GUI clients. However, each of those
parties have an independent input-event stream. Whereas the order of
events within one GUI session is strict, the order of events between GUI
sessions is arbitrary. The window manager wrongly relied on a global
event ordering to track the pointed-at GUI session.
The patch removes the assumption of a global event order by tracking the
relevant pointer state for each GUI session independently and evaluating
these states when propagating the pointer position to the decorator.
Fixes#4059
The addition of further keyboard layouts would otherwise pollute the
config/ directory too much.
Caution: When updating Sculpt OS, don't reuse your existing
config/event_filter file unmodified! You need to replace the chargen
includes, pointing to the new location, e.g.,
<include rom="en_us.chargen"/>
<include rom="special.chargen"/>
must be changed to
<include rom="keyboard/en_us"/>
<include rom="keyboard/special"/>
Issue #4055
This patch extends the settings dialog with the ability to select the
keyboard layout between the options that are included in the sculpt
image. The manual configuration is of course still possible by editing
the /config/event_filter directly.
If both the fonts configuration and the event-filter configuration are
managed manually, the settings button and window are not displayed.
Fixes#4055
By sorting the reported output, all consumers of the reports become able
to rely on a deterministic order. For example, the file browser of
Sculpt OS, the launcher menu items, and the depot-selection items will
appear in a predictable order.
Fixes#4054
This patch adds session-routing options to connect components to the
capture/event interfaces of the global nitpicker GUI server or the
leitzentrale GUI server. It thereby enables the implementation of screen
capturing components, remote management tools, or virtual keyboards.
Since those services are very powerful, they are subsumed under the
"hardware" category of the component graph as opposed to the GUI
category, which guarantees the separation of clients.
Fixes#4053
This patch adds 4 priority levels to the runtime subsystem. The highest
priority is used for components that are critical for the operation of
Sculpt, in particular the Leitzentrale GUI. All regularly deployed
components are assigned the lowest priority by default.
With priorities available in the runtime subsystem, this patch flattens
the priority levels at the top-level init to only two levels and
overlays the priority bands of the drivers, leitzentrale, and runtime
subsystems into one priority band. This has three benenfits:
- This change prevents the starvation of the Leitzentrale GUI from a
spinning high-priority driver (issue #3997).
- The change will also ease the hosting of latency-critical components
in the runtime subsystem that are prioritized higher than regular
components, the storage stack, and the network stack.
- The Leitzentrale GUI remains always perfectly responsive regardless
of the workloads deployed from packages. In the previous version,
the runtime graph was sometimes stuttering on high system load.
Issue #4045
This patch triggers the immediate removal of part_block once the
discovery of a fresh inserted USB stick has completed. Without the
patch, part_block was retained until the runtime was reconfigured the
next time for other reasons (e.g., toggling an inspect view). Until the
next reconfituration, part_block tended to stand in the way of directly
assigning the USB device to a VM.
This patch increases the RAM quota of the nitpicker instance for the
leitzentrale to make it suffice for the buffering of content during
resize operations. This fixes a flickering artifact when having an
inspect view open while entering a WLAN passphrase. When the connect
button appears or disappears (depending on the number of written
characters), some parts of the inspect terminal would flicker sometimes.
This prevents the log terminal from adjusting itself to the whole screen
size before the leitzentrale window layout is applied. This intermediate
size can otherwise exhaust the 8 MiB of RAM quota of the log terminal.
Issue #3970
